! Started logfile: J1644-0743_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:16:50 2012
obs J1644-0743_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1644-0743_S_2011_08_02_pus_uva.fits
! AN table 1: 182 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.450197 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1644-0743
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2654 lines of history.
! 
! Reading 25564 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1644-0743_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 752 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 752 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 752 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 752 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.878201Jy  sigma=0.010319
! Fit after  self-cal, rms=0.856219Jy  sigma=0.010102
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=11.93 mas, bpa=-17.36 degrees
! Estimated noise=717.176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117951 Jy
! Component: 100  -  total flux cleaned = 0.143771 Jy
! Total flux subtracted in 100 components = 0.143771 Jy
! Clean residual min=-0.008201 max=0.008484 Jy/beam
! Clean residual mean=0.000189 rms=0.002148 Jy/beam
! Combined flux in latest and established models = 0.143771 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.143771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137577Jy  sigma=0.001426
! Fit after  self-cal, rms=0.137566Jy  sigma=0.001426
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.078 mas, bmaj=13.04 mas, bpa=-16.85 degrees
! Estimated noise=382.753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111152 Jy
! Component: 100  -  total flux cleaned = 0.0164904 Jy
! Component: 150  -  total flux cleaned = 0.0195965 Jy
! Component: 200  -  total flux cleaned = 0.0214049 Jy
! Total flux subtracted in 200 components = 0.0214049 Jy
! Clean residual min=-0.005973 max=0.006601 Jy/beam
! Clean residual mean=0.000160 rms=0.001556 Jy/beam
! Combined flux in latest and established models = 0.165176 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.165176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136660Jy  sigma=0.001416
! Fit after  self-cal, rms=0.136713Jy  sigma=0.001416
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.13     FT        1.00*    HH        1.00*    
!   HN        1.03     KP        0.97     LA        1.05     MK        0.84     
!   NL        0.93     OV        0.99     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.24     FT        1.00*    HH        1.00*    
!   HN        1.17     KP        1.06     LA        0.95     MK        1.02     
!   NL        1.05     OV        1.04     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.18     FT        1.00*    HH        1.00*    
!   HN        1.03     KP        1.00     LA        0.90     MK        1.03     
!   NL        1.00     OV        1.02     PT        0.99     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.17     FT        1.00*    HH        1.00*    
!   HN        1.12     KP        0.91     LA        0.74     MK        1.07     
!   NL        0.89     OV        0.86     PT        0.94     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.136713Jy  sigma=0.001416
! Fit after  self-cal, rms=0.134624Jy  sigma=0.001384
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.101 mas, bmaj=13.07 mas, bpa=-17.1 degrees
! Estimated noise=382.102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000669365 Jy
! Component: 100  -  total flux cleaned = -0.000670838 Jy
! Component: 150  -  total flux cleaned = -0.000611402 Jy
! Component: 200  -  total flux cleaned = -0.000507237 Jy
! Total flux subtracted in 200 components = -0.000507237 Jy
! Clean residual min=-0.002674 max=0.001889 Jy/beam
! Clean residual mean=0.000024 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.164669 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.164669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134605Jy  sigma=0.001384
! Fit after  self-cal, rms=0.134700Jy  sigma=0.001383
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134700Jy  sigma=0.001383
! Fit after  self-cal, rms=0.135745Jy  sigma=0.001381
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.102 mas, bmaj=13.07 mas, bpa=-17.14 degrees
! Estimated noise=381.958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.48914e-06 Jy
! Component: 100  -  total flux cleaned = -6.9867e-05 Jy
! Component: 150  -  total flux cleaned = -0.000130154 Jy
! Component: 200  -  total flux cleaned = -0.000183916 Jy
! Total flux subtracted in 200 components = -0.000183916 Jy
! Clean residual min=-0.002577 max=0.001879 Jy/beam
! Clean residual mean=0.000014 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.164485 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.164485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135738Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135765Jy  sigma=0.001381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.25027e-05 Jy
! Component: 100  -  total flux cleaned = -6.23131e-05 Jy
! Component: 150  -  total flux cleaned = -7.66506e-05 Jy
! Component: 200  -  total flux cleaned = -7.59932e-05 Jy
! Total flux subtracted in 200 components = -7.59932e-05 Jy
! Clean residual min=-0.002569 max=0.001863 Jy/beam
! Clean residual mean=0.000015 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.164409 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.164409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135762Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135764Jy  sigma=0.001381
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135764Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135850Jy  sigma=0.001381
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=13.06 mas, bpa=-17.19 degrees
! Estimated noise=381.991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.83798e-05 Jy
! Component: 100  -  total flux cleaned = 4.83792e-05 Jy
! Component: 150  -  total flux cleaned = 3.76725e-06 Jy
! Component: 200  -  total flux cleaned = -2.34481e-05 Jy
! Total flux subtracted in 200 components = -2.34481e-05 Jy
! Clean residual min=-0.002575 max=0.001872 Jy/beam
! Clean residual mean=0.000013 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.164386 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 63 components and 0.164386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135846Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135850Jy  sigma=0.001381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.8653e-07 Jy
! Component: 100  -  total flux cleaned = -1.35618e-05 Jy
! Component: 150  -  total flux cleaned = -1.38893e-05 Jy
! Component: 200  -  total flux cleaned = -2.44987e-05 Jy
! Total flux subtracted in 200 components = -2.44987e-05 Jy
! Clean residual min=-0.002567 max=0.001858 Jy/beam
! Clean residual mean=0.000013 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.164361 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 66 components and 0.164361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135847Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135849Jy  sigma=0.001381
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135849Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135810Jy  sigma=0.001381
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.534 mas, bmaj=15.07 mas, bpa=-5.187 degrees
! Estimated noise=416.104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.35732e-05 Jy
! Component: 100  -  total flux cleaned = -5.3145e-05 Jy
! Component: 150  -  total flux cleaned = -3.76461e-05 Jy
! Component: 200  -  total flux cleaned = -1.70987e-05 Jy
! Total flux subtracted in 200 components = -1.70987e-05 Jy
! Clean residual min=-0.002484 max=0.002049 Jy/beam
! Clean residual mean=0.000023 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.164344 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.164344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135811Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135809Jy  sigma=0.001381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.8018e-05 Jy
! Component: 100  -  total flux cleaned = -3.45905e-05 Jy
! Component: 150  -  total flux cleaned = -2.85974e-05 Jy
! Component: 200  -  total flux cleaned = -2.84971e-05 Jy
! Total flux subtracted in 200 components = -2.84971e-05 Jy
! Clean residual min=-0.002471 max=0.002040 Jy/beam
! Clean residual mean=0.000023 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.164315 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 83 components and 0.164315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135810Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135809Jy  sigma=0.001381
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.095 mas, bmaj=13.06 mas, bpa=-17.23 degrees
! Estimated noise=382.004 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.095 x 13.06 at -17.23 degrees (North through East)
! Clean map  min=-0.0025239  max=0.15314 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.124 mas, bmaj=11.93 mas, bpa=-17.86 degrees
! Estimated noise=715.726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117436 Jy
! Component: 100  -  total flux cleaned = 0.143098 Jy
! Component: 150  -  total flux cleaned = 0.15075 Jy
! Component: 200  -  total flux cleaned = 0.154992 Jy
! Total flux subtracted in 200 components = 0.154992 Jy
! Clean residual min=-0.004417 max=0.004153 Jy/beam
! Clean residual mean=0.000053 rms=0.001204 Jy/beam
! Combined flux in latest and established models = 0.154992 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.154992 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.095 mas, bmaj=13.06 mas, bpa=-17.23 degrees
! Estimated noise=382.004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004355 Jy
! Component: 100  -  total flux cleaned = 0.00655784 Jy
! Component: 150  -  total flux cleaned = 0.00790421 Jy
! Component: 200  -  total flux cleaned = 0.00843949 Jy
! Total flux subtracted in 200 components = 0.00843949 Jy
! Clean residual min=-0.002617 max=0.001837 Jy/beam
! Clean residual mean=0.000021 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.163431 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 49 components and 0.163431 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.681 mas, bmaj=13.05 mas, bpa=-18.04 degrees
! Estimated noise=424.357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355406 Jy
! Component: 100  -  total flux cleaned = 0.000616291 Jy
! Component: 150  -  total flux cleaned = 0.000755333 Jy
! Component: 200  -  total flux cleaned = 0.000830148 Jy
! Total flux subtracted in 200 components = 0.000830148 Jy
! Clean residual min=-0.002617 max=0.002113 Jy/beam
! Clean residual mean=0.000010 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.164261 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.36514e-05 Jy
! Component: 100  -  total flux cleaned = 2.3628e-05 Jy
! Component: 150  -  total flux cleaned = 4.31186e-05 Jy
! Component: 200  -  total flux cleaned = 2.45185e-05 Jy
! Total flux subtracted in 200 components = 2.45185e-05 Jy
! Clean residual min=-0.002611 max=0.002078 Jy/beam
! Clean residual mean=0.000010 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.164286 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 63 components and 0.164286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135807Jy  sigma=0.001381
! Fit after  self-cal, rms=0.135802Jy  sigma=0.001381
wmodel J1644-0743_S_2011_08_02_pus_map.mod
! Writing 63 model components to file: J1644-0743_S_2011_08_02_pus_map.mod
wobs J1644-0743_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1644-0743_S_2011_08_02_pus_uvs.fits
wwins J1644-0743_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J1644-0743_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109972 Jy
! Component: 100  -  total flux cleaned = -0.0012155 Jy
! Component: 150  -  total flux cleaned = -0.00121607 Jy
! Component: 200  -  total flux cleaned = -0.00145768 Jy
! Component: 250  -  total flux cleaned = -0.00174354 Jy
! Component: 300  -  total flux cleaned = -0.00204072 Jy
! Component: 350  -  total flux cleaned = -0.00224615 Jy
! Component: 400  -  total flux cleaned = -0.00229558 Jy
! Component: 450  -  total flux cleaned = -0.00236762 Jy
! Component: 500  -  total flux cleaned = -0.0023681 Jy
! Component: 550  -  total flux cleaned = -0.00236839 Jy
! Component: 600  -  total flux cleaned = -0.00236846 Jy
! Component: 650  -  total flux cleaned = -0.00234743 Jy
! Component: 700  -  total flux cleaned = -0.00234784 Jy
! Component: 750  -  total flux cleaned = -0.00232761 Jy
! Component: 800  -  total flux cleaned = -0.00230815 Jy
! Component: 850  -  total flux cleaned = -0.00228899 Jy
! Component: 900  -  total flux cleaned = -0.00227048 Jy
! Component: 950  -  total flux cleaned = -0.00221443 Jy
! Component: 1000  -  total flux cleaned = -0.0021776 Jy
! Component: 1050  -  total flux cleaned = -0.00212342 Jy
! Component: 1100  -  total flux cleaned = -0.00207047 Jy
! Component: 1150  -  total flux cleaned = -0.0020705 Jy
! Component: 1200  -  total flux cleaned = -0.00208754 Jy
! Component: 1250  -  total flux cleaned = -0.00202048 Jy
! Component: 1300  -  total flux cleaned = -0.00205395 Jy
! Component: 1350  -  total flux cleaned = -0.00207035 Jy
! Component: 1400  -  total flux cleaned = -0.00205437 Jy
! Component: 1450  -  total flux cleaned = -0.0020074 Jy
! Component: 1500  -  total flux cleaned = -0.00199187 Jy
! Component: 1550  -  total flux cleaned = -0.00203789 Jy
! Component: 1600  -  total flux cleaned = -0.00205293 Jy
! Component: 1650  -  total flux cleaned = -0.00196335 Jy
! Component: 1700  -  total flux cleaned = -0.00199287 Jy
! Component: 1750  -  total flux cleaned = -0.00194915 Jy
! Component: 1800  -  total flux cleaned = -0.00194935 Jy
! Component: 1850  -  total flux cleaned = -0.00193561 Jy
! Component: 1900  -  total flux cleaned = -0.00199146 Jy
! Component: 1950  -  total flux cleaned = -0.00200492 Jy
! Component: 2000  -  total flux cleaned = -0.00201874 Jy
! Total flux subtracted in 2048 components = -0.00205929 Jy
! Clean residual min=-0.000779 max=0.000792 Jy/beam
! Clean residual mean=0.000012 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.162227 Jy
keep
! Adding 125 model components to the UV plane model.
! The established model now contains 188 components and 0.162227 Jy
![Exited script file: muppet]
wmap "J1644-0743_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.681 x 13.05 at -18.04 degrees (North through East)
! Clean map  min=-0.0018037  max=0.15245 Jy/beam
! Writing clean map to FITS file: J1644-0743_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.15245 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000294714 
device "J1644-0743_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1644-0743_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.579956 0.579956 1.15991 2.31982 4.63965 9.2793 18.5586 37.1172 74.2344
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.152 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.681 x 13.05 at -18.04 degrees (North through East)
! Clean map  min=-0.0018037  max=0.15245 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1644-0743_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1644-0743_S_2011_08_02_pus_map.gif/vgif'
mapplot cln