! Started logfile: J1510-1121_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:54:12 2012
obs J1510-1121_X_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1510-1121_X_2011_08_02_pus_uva.fits
! AN table 1: 181 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.448364 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1510-1121
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3146 lines of history.
! 
! Reading 25320 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1510-1121_X_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 755 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 755 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 755 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 867 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.900476Jy  sigma=0.009810
! Fit after  self-cal, rms=0.866255Jy  sigma=0.009495
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7962 mas, bmaj=3.2 mas, bpa=-19.87 degrees
! Estimated noise=914.401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110206 Jy
! Component: 100  -  total flux cleaned = 0.13424 Jy
! Total flux subtracted in 100 components = 0.13424 Jy
! Clean residual min=-0.005241 max=0.006854 Jy/beam
! Clean residual mean=0.000036 rms=0.001597 Jy/beam
! Combined flux in latest and established models = 0.13424 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.13424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143488Jy  sigma=0.001365
! Fit after  self-cal, rms=0.143469Jy  sigma=0.001365
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=3.473 mas, bpa=-18.29 degrees
! Estimated noise=419.694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00830854 Jy
! Component: 100  -  total flux cleaned = 0.0112534 Jy
! Component: 150  -  total flux cleaned = 0.0121493 Jy
! Component: 200  -  total flux cleaned = 0.0122516 Jy
! Total flux subtracted in 200 components = 0.0122516 Jy
! Clean residual min=-0.005168 max=0.004415 Jy/beam
! Clean residual mean=-0.000023 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.146492 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.146492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142972Jy  sigma=0.001360
! Fit after  self-cal, rms=0.142983Jy  sigma=0.001360
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     FT        1.00*    HH        1.00*    
!   HN        1.01     KP        0.89     LA        1.02     MK        0.97     
!   NL        0.96     OV        1.04     PT        1.05     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.92     FT        1.00*    HH        1.00*    
!   HN        0.99     KP        0.89     LA        1.04     MK        1.03     
!   NL        1.12     OV        1.05     PT        1.11     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.89     FT        1.00*    HH        1.00*    
!   HN        0.96     KP        0.81     LA        0.98     MK        1.00     
!   NL        1.04     OV        1.08     PT        1.02     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     FT        1.00*    HH        1.00*    
!   HN        0.90     KP        0.85     LA        1.10     MK        1.01     
!   NL        1.06     OV        1.06     PT        1.14     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.142983Jy  sigma=0.001360
! Fit after  self-cal, rms=0.138285Jy  sigma=0.001349
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=3.473 mas, bpa=-18.2 degrees
! Estimated noise=417.676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245277 Jy
! Component: 100  -  total flux cleaned = 0.000268124 Jy
! Component: 150  -  total flux cleaned = 0.000269518 Jy
! Component: 200  -  total flux cleaned = 0.000254261 Jy
! Total flux subtracted in 200 components = 0.000254261 Jy
! Clean residual min=-0.002098 max=0.002166 Jy/beam
! Clean residual mean=-0.000008 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.146746 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.146746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138278Jy  sigma=0.001349
! Fit after  self-cal, rms=0.138279Jy  sigma=0.001349
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138279Jy  sigma=0.001349
! Fit after  self-cal, rms=0.138650Jy  sigma=0.001348
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.469 mas, bpa=-18.22 degrees
! Estimated noise=417.604 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000424941 Jy
! Component: 100  -  total flux cleaned = 0.00042432 Jy
! Component: 150  -  total flux cleaned = 0.00042471 Jy
! Component: 200  -  total flux cleaned = 0.000412348 Jy
! Total flux subtracted in 200 components = 0.000412348 Jy
! Clean residual min=-0.002002 max=0.001946 Jy/beam
! Clean residual mean=-0.000002 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.147159 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.147159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138646Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138662Jy  sigma=0.001348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.391e-05 Jy
! Component: 100  -  total flux cleaned = -4.45515e-05 Jy
! Component: 150  -  total flux cleaned = -3.24511e-05 Jy
! Component: 200  -  total flux cleaned = -2.24716e-05 Jy
! Total flux subtracted in 200 components = -2.24716e-05 Jy
! Clean residual min=-0.002002 max=0.001977 Jy/beam
! Clean residual mean=-0.000002 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.147136 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.147136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138660Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138659Jy  sigma=0.001348
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138659Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138851Jy  sigma=0.001348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=3.467 mas, bpa=-18.21 degrees
! Estimated noise=417.584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140283 Jy
! Component: 100  -  total flux cleaned = 0.000165841 Jy
! Component: 150  -  total flux cleaned = 0.000189595 Jy
! Component: 200  -  total flux cleaned = 0.00020159 Jy
! Total flux subtracted in 200 components = 0.00020159 Jy
! Clean residual min=-0.001997 max=0.001945 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.147338 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.147338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138849Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138853Jy  sigma=0.001348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.09923e-05 Jy
! Component: 100  -  total flux cleaned = 2.07398e-05 Jy
! Component: 150  -  total flux cleaned = 2.07718e-05 Jy
! Component: 200  -  total flux cleaned = 2.07996e-05 Jy
! Total flux subtracted in 200 components = 2.07996e-05 Jy
! Clean residual min=-0.002002 max=0.001964 Jy/beam
! Clean residual mean=-0.000002 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.147359 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 33 components and 0.147359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138851Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138850Jy  sigma=0.001348
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138850Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138950Jy  sigma=0.001348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.392 mas, bmaj=4.286 mas, bpa=-2.774 degrees
! Estimated noise=486.048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.5985e-05 Jy
! Component: 100  -  total flux cleaned = -4.22217e-05 Jy
! Component: 150  -  total flux cleaned = -7.31549e-06 Jy
! Component: 200  -  total flux cleaned = 2.18187e-05 Jy
! Total flux subtracted in 200 components = 2.18187e-05 Jy
! Clean residual min=-0.002153 max=0.001799 Jy/beam
! Clean residual mean=-0.000003 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.14738 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.14738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138950Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138950Jy  sigma=0.001348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.02489e-05 Jy
! Component: 100  -  total flux cleaned = 5.45946e-06 Jy
! Component: 150  -  total flux cleaned = -5.9652e-07 Jy
! Component: 200  -  total flux cleaned = -6.40635e-06 Jy
! Total flux subtracted in 200 components = -6.40635e-06 Jy
! Clean residual min=-0.002144 max=0.001799 Jy/beam
! Clean residual mean=-0.000003 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.147374 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.147374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138951Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138949Jy  sigma=0.001348
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=3.465 mas, bpa=-18.21 degrees
! Estimated noise=417.494 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.025 x 3.465 at -18.21 degrees (North through East)
! Clean map  min=-0.0018307  max=0.14384 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7977 mas, bmaj=3.198 mas, bpa=-19.76 degrees
! Estimated noise=907.851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109296 Jy
! Component: 100  -  total flux cleaned = 0.133145 Jy
! Component: 150  -  total flux cleaned = 0.139586 Jy
! Component: 200  -  total flux cleaned = 0.143153 Jy
! Total flux subtracted in 200 components = 0.143153 Jy
! Clean residual min=-0.004029 max=0.004610 Jy/beam
! Clean residual mean=0.000014 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.143153 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.143153 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=3.465 mas, bpa=-18.21 degrees
! Estimated noise=417.494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362963 Jy
! Component: 100  -  total flux cleaned = 0.00418921 Jy
! Component: 150  -  total flux cleaned = 0.00436316 Jy
! Component: 200  -  total flux cleaned = 0.00446745 Jy
! Total flux subtracted in 200 components = 0.00446745 Jy
! Clean residual min=-0.001980 max=0.001986 Jy/beam
! Clean residual mean=-0.000002 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.14762 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.14762 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.996 mas, bmaj=3.409 mas, bpa=-17.81 degrees
! Estimated noise=447.722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.97313e-05 Jy
! Component: 100  -  total flux cleaned = 4.40207e-05 Jy
! Component: 150  -  total flux cleaned = 4.41092e-05 Jy
! Component: 200  -  total flux cleaned = 2.21563e-05 Jy
! Total flux subtracted in 200 components = 2.21563e-05 Jy
! Clean residual min=-0.002249 max=0.002003 Jy/beam
! Clean residual mean=-0.000002 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.147643 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.68297e-07 Jy
! Component: 100  -  total flux cleaned = 3.50525e-07 Jy
! Component: 150  -  total flux cleaned = -1.74997e-05 Jy
! Component: 200  -  total flux cleaned = -1.72246e-05 Jy
! Total flux subtracted in 200 components = -1.72246e-05 Jy
! Clean residual min=-0.002220 max=0.002032 Jy/beam
! Clean residual mean=-0.000002 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.147625 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.147625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138954Jy  sigma=0.001348
! Fit after  self-cal, rms=0.138953Jy  sigma=0.001348
wmodel J1510-1121_X_2011_08_02_pus_map.mod
! Writing 41 model components to file: J1510-1121_X_2011_08_02_pus_map.mod
wobs J1510-1121_X_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1510-1121_X_2011_08_02_pus_uvs.fits
wwins J1510-1121_X_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J1510-1121_X_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000719779 Jy
! Component: 100  -  total flux cleaned = -0.00111381 Jy
! Component: 150  -  total flux cleaned = -0.0013478 Jy
! Component: 200  -  total flux cleaned = -0.00150713 Jy
! Component: 250  -  total flux cleaned = -0.00160011 Jy
! Component: 300  -  total flux cleaned = -0.0016904 Jy
! Component: 350  -  total flux cleaned = -0.00180596 Jy
! Component: 400  -  total flux cleaned = -0.00183316 Jy
! Component: 450  -  total flux cleaned = -0.00175157 Jy
! Component: 500  -  total flux cleaned = -0.00167236 Jy
! Component: 550  -  total flux cleaned = -0.00167281 Jy
! Component: 600  -  total flux cleaned = -0.00162237 Jy
! Component: 650  -  total flux cleaned = -0.00159765 Jy
! Component: 700  -  total flux cleaned = -0.00154901 Jy
! Component: 750  -  total flux cleaned = -0.00150144 Jy
! Component: 800  -  total flux cleaned = -0.0015013 Jy
! Component: 850  -  total flux cleaned = -0.00147779 Jy
! Component: 900  -  total flux cleaned = -0.00147791 Jy
! Component: 950  -  total flux cleaned = -0.0014779 Jy
! Component: 1000  -  total flux cleaned = -0.00152114 Jy
! Component: 1050  -  total flux cleaned = -0.00154235 Jy
! Component: 1100  -  total flux cleaned = -0.00152146 Jy
! Component: 1150  -  total flux cleaned = -0.00158303 Jy
! Component: 1200  -  total flux cleaned = -0.00158221 Jy
! Component: 1250  -  total flux cleaned = -0.00160219 Jy
! Component: 1300  -  total flux cleaned = -0.00166134 Jy
! Component: 1350  -  total flux cleaned = -0.0017003 Jy
! Component: 1400  -  total flux cleaned = -0.00170057 Jy
! Component: 1450  -  total flux cleaned = -0.0017383 Jy
! Component: 1500  -  total flux cleaned = -0.001738 Jy
! Component: 1550  -  total flux cleaned = -0.00181149 Jy
! Component: 1600  -  total flux cleaned = -0.00175694 Jy
! Component: 1650  -  total flux cleaned = -0.0017929 Jy
! Component: 1700  -  total flux cleaned = -0.00181053 Jy
! Component: 1750  -  total flux cleaned = -0.00181049 Jy
! Component: 1800  -  total flux cleaned = -0.00182784 Jy
! Component: 1850  -  total flux cleaned = -0.0018107 Jy
! Component: 1900  -  total flux cleaned = -0.00182795 Jy
! Component: 1950  -  total flux cleaned = -0.00182793 Jy
! Component: 2000  -  total flux cleaned = -0.00186101 Jy
! Total flux subtracted in 2048 components = -0.0018447 Jy
! Clean residual min=-0.000914 max=0.000926 Jy/beam
! Clean residual mean=-0.000004 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.145781 Jy
keep
! Adding 124 model components to the UV plane model.
! The established model now contains 165 components and 0.145781 Jy
![Exited script file: muppet]
wmap "J1510-1121_X_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.996 x 3.409 at -17.81 degrees (North through East)
! Clean map  min=-0.0015593  max=0.1428 Jy/beam
! Writing clean map to FITS file: J1510-1121_X_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.142802 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000316954 
device "J1510-1121_X_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1510-1121_X_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.665859 0.665859 1.33172 2.66344 5.32687 10.6537 21.3075 42.615 85.2299
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.142 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.996 x 3.409 at -17.81 degrees (North through East)
! Clean map  min=-0.0015593  max=0.1428 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1510-1121_X_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1510-1121_X_2011_08_02_pus_map.gif/vgif'
mapplot cln