! Started logfile: J1510-1121_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:16:21 2012
obs J1510-1121_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1510-1121_S_2011_08_02_pus_uva.fits
! AN table 1: 155 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.417866 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1510-1121
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 20208 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1510-1121_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 694 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 739 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 739 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 739 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010791Jy  sigma=0.011795
! Fit after  self-cal, rms=0.944012Jy  sigma=0.011089
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=10.83 mas, bpa=-18.17 degrees
! Estimated noise=658.896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0517511 Jy
! Component: 100  -  total flux cleaned = 0.0600499 Jy
! Total flux subtracted in 100 components = 0.0600499 Jy
! Clean residual min=-0.005620 max=0.006145 Jy/beam
! Clean residual mean=0.000119 rms=0.001744 Jy/beam
! Combined flux in latest and established models = 0.0600499 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0600499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128459Jy  sigma=0.001292
! Fit after  self-cal, rms=0.126723Jy  sigma=0.001273
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.424 mas, bmaj=12.85 mas, bpa=-18.47 degrees
! Estimated noise=447.374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.18666e-05 Jy
! Component: 100  -  total flux cleaned = -0.000942533 Jy
! Component: 150  -  total flux cleaned = -0.00129816 Jy
! Component: 200  -  total flux cleaned = -0.0014039 Jy
! Total flux subtracted in 200 components = -0.0014039 Jy
! Clean residual min=-0.003490 max=0.003641 Jy/beam
! Clean residual mean=0.000012 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.058646 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.058646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126344Jy  sigma=0.001270
! Fit after  self-cal, rms=0.126072Jy  sigma=0.001269
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.21     FT        1.00*    HH        1.00*    
!   HN        0.72     KP        1.07     LA        1.01     MK        0.71     
!   NL        0.93     OV        1.10     PT        1.09     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.25     FT        1.00*    HH        1.00*    
!   HN        0.65     KP        1.07     LA        0.99     MK        0.95     
!   NL        1.05     OV        1.11     PT        1.02     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.20     FT        1.00*    HH        1.00*    
!   HN        0.67     KP        1.02     LA        0.92     MK        0.93     
!   NL        1.06     OV        1.10     PT        1.04     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.20     FT        1.00*    HH        1.00*    
!   HN        0.65     KP        0.92     LA        0.72     MK        1.03     
!   NL        0.97     OV        0.90     PT        0.98     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.126072Jy  sigma=0.001269
! Fit after  self-cal, rms=0.110862Jy  sigma=0.001259
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.182 mas, bmaj=12.83 mas, bpa=-18.37 degrees
! Estimated noise=438.79 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000877968 Jy
! Component: 100  -  total flux cleaned = 0.00097264 Jy
! Component: 150  -  total flux cleaned = 0.00100815 Jy
! Component: 200  -  total flux cleaned = 0.000976956 Jy
! Total flux subtracted in 200 components = 0.000976956 Jy
! Clean residual min=-0.002370 max=0.001978 Jy/beam
! Clean residual mean=-0.000033 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.059623 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.059623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110824Jy  sigma=0.001259
! Fit after  self-cal, rms=0.110509Jy  sigma=0.001254
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110509Jy  sigma=0.001254
! Fit after  self-cal, rms=0.110039Jy  sigma=0.001251
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.091 mas, bmaj=12.81 mas, bpa=-18.81 degrees
! Estimated noise=438.611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208325 Jy
! Component: 100  -  total flux cleaned = 0.000211532 Jy
! Component: 150  -  total flux cleaned = 0.00015397 Jy
! Component: 200  -  total flux cleaned = 0.000137633 Jy
! Total flux subtracted in 200 components = 0.000137633 Jy
! Clean residual min=-0.001875 max=0.001915 Jy/beam
! Clean residual mean=-0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.0597606 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.0597606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110031Jy  sigma=0.001251
! Fit after  self-cal, rms=0.110280Jy  sigma=0.001249
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000629134 Jy
! Component: 100  -  total flux cleaned = -0.000741646 Jy
! Component: 150  -  total flux cleaned = -0.000817569 Jy
! Component: 200  -  total flux cleaned = -0.000840959 Jy
! Total flux subtracted in 200 components = -0.000840959 Jy
! Clean residual min=-0.002091 max=0.001650 Jy/beam
! Clean residual mean=-0.000006 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.0589196 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 0.0589196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110264Jy  sigma=0.001248
! Fit after  self-cal, rms=0.110257Jy  sigma=0.001248
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110257Jy  sigma=0.001248
! Fit after  self-cal, rms=0.112002Jy  sigma=0.001248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.059 mas, bmaj=12.79 mas, bpa=-18.89 degrees
! Estimated noise=439.722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026119 Jy
! Component: 100  -  total flux cleaned = 0.000224426 Jy
! Component: 150  -  total flux cleaned = 0.000191341 Jy
! Component: 200  -  total flux cleaned = 0.000161073 Jy
! Total flux subtracted in 200 components = 0.000161073 Jy
! Clean residual min=-0.001837 max=0.001565 Jy/beam
! Clean residual mean=-0.000005 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0590807 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.0590807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111997Jy  sigma=0.001248
! Fit after  self-cal, rms=0.112226Jy  sigma=0.001247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000295865 Jy
! Component: 100  -  total flux cleaned = -0.000408419 Jy
! Component: 150  -  total flux cleaned = -0.000424375 Jy
! Component: 200  -  total flux cleaned = -0.000439466 Jy
! Total flux subtracted in 200 components = -0.000439466 Jy
! Clean residual min=-0.001846 max=0.001582 Jy/beam
! Clean residual mean=-0.000008 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0586412 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.0586412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112219Jy  sigma=0.001247
! Fit after  self-cal, rms=0.112226Jy  sigma=0.001247
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112226Jy  sigma=0.001247
! Fit after  self-cal, rms=0.113661Jy  sigma=0.001247
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.65 mas, bmaj=15.85 mas, bpa=-5.5 degrees
! Estimated noise=503.409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.56427e-05 Jy
! Component: 100  -  total flux cleaned = 9.65129e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123909 Jy
! Component: 200  -  total flux cleaned = 0.000124229 Jy
! Total flux subtracted in 200 components = 0.000124229 Jy
! Clean residual min=-0.001504 max=0.001292 Jy/beam
! Clean residual mean=-0.000006 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.0587655 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.0587655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113660Jy  sigma=0.001247
! Fit after  self-cal, rms=0.113812Jy  sigma=0.001247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000438643 Jy
! Component: 100  -  total flux cleaned = -0.000431561 Jy
! Component: 150  -  total flux cleaned = -0.000417715 Jy
! Component: 200  -  total flux cleaned = -0.000410146 Jy
! Total flux subtracted in 200 components = -0.000410146 Jy
! Clean residual min=-0.001509 max=0.001321 Jy/beam
! Clean residual mean=-0.000006 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0583553 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.0583553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113812Jy  sigma=0.001247
! Fit after  self-cal, rms=0.113818Jy  sigma=0.001247
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.043 mas, bmaj=12.78 mas, bpa=-18.89 degrees
! Estimated noise=441.261 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.043 x 12.78 at -18.89 degrees (North through East)
! Clean map  min=-0.005257  max=0.066004 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.148 mas, bmaj=10.96 mas, bpa=-18.55 degrees
! Estimated noise=611.809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516932 Jy
! Component: 100  -  total flux cleaned = 0.059209 Jy
! Component: 150  -  total flux cleaned = 0.0598876 Jy
! Component: 200  -  total flux cleaned = 0.060042 Jy
! Total flux subtracted in 200 components = 0.060042 Jy
! Clean residual min=-0.004243 max=0.003282 Jy/beam
! Clean residual mean=0.000033 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.060042 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.060042 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.043 mas, bmaj=12.78 mas, bpa=-18.89 degrees
! Estimated noise=441.261 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000680497 Jy
! Component: 100  -  total flux cleaned = -0.000927658 Jy
! Component: 150  -  total flux cleaned = -0.00103287 Jy
! Component: 200  -  total flux cleaned = -0.00112487 Jy
! Total flux subtracted in 200 components = -0.00112487 Jy
! Clean residual min=-0.002042 max=0.001610 Jy/beam
! Clean residual mean=-0.000010 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.0589171 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.0589171 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.96 mas, bmaj=12.68 mas, bpa=-19.77 degrees
! Estimated noise=479.12 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000303473 Jy
! Component: 100  -  total flux cleaned = -0.000344917 Jy
! Component: 150  -  total flux cleaned = -0.00045843 Jy
! Component: 200  -  total flux cleaned = -0.000492319 Jy
! Total flux subtracted in 200 components = -0.000492319 Jy
! Clean residual min=-0.002086 max=0.001713 Jy/beam
! Clean residual mean=-0.000006 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0584248 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.34731e-05 Jy
! Component: 100  -  total flux cleaned = -9.20614e-05 Jy
! Component: 150  -  total flux cleaned = -0.000146228 Jy
! Component: 200  -  total flux cleaned = -0.000145518 Jy
! Total flux subtracted in 200 components = -0.000145518 Jy
! Clean residual min=-0.002031 max=0.001650 Jy/beam
! Clean residual mean=-0.000005 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.0582793 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 34 components and 0.0582793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113826Jy  sigma=0.001247
! Fit after  self-cal, rms=0.113816Jy  sigma=0.001247
wmodel J1510-1121_S_2011_08_02_pus_map.mod
! Writing 34 model components to file: J1510-1121_S_2011_08_02_pus_map.mod
wobs J1510-1121_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1510-1121_S_2011_08_02_pus_uvs.fits
wwins J1510-1121_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J1510-1121_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249697 Jy
! Component: 100  -  total flux cleaned = -0.000220304 Jy
! Component: 150  -  total flux cleaned = -0.000331819 Jy
! Component: 200  -  total flux cleaned = -0.000437996 Jy
! Component: 250  -  total flux cleaned = -0.000514504 Jy
! Component: 300  -  total flux cleaned = -0.000564541 Jy
! Component: 350  -  total flux cleaned = -0.0007074 Jy
! Component: 400  -  total flux cleaned = -0.000868468 Jy
! Component: 450  -  total flux cleaned = -0.000913596 Jy
! Component: 500  -  total flux cleaned = -0.00100132 Jy
! Component: 550  -  total flux cleaned = -0.00102242 Jy
! Component: 600  -  total flux cleaned = -0.00102295 Jy
! Component: 650  -  total flux cleaned = -0.00104351 Jy
! Component: 700  -  total flux cleaned = -0.00108287 Jy
! Component: 750  -  total flux cleaned = -0.00104398 Jy
! Component: 800  -  total flux cleaned = -0.00106313 Jy
! Component: 850  -  total flux cleaned = -0.00104434 Jy
! Component: 900  -  total flux cleaned = -0.000989202 Jy
! Component: 950  -  total flux cleaned = -0.0010256 Jy
! Component: 1000  -  total flux cleaned = -0.00102561 Jy
! Component: 1050  -  total flux cleaned = -0.00109535 Jy
! Component: 1100  -  total flux cleaned = -0.00114677 Jy
! Component: 1150  -  total flux cleaned = -0.00121458 Jy
! Component: 1200  -  total flux cleaned = -0.00131446 Jy
! Component: 1250  -  total flux cleaned = -0.00139619 Jy
! Component: 1300  -  total flux cleaned = -0.00146092 Jy
! Component: 1350  -  total flux cleaned = -0.00155692 Jy
! Component: 1400  -  total flux cleaned = -0.00165131 Jy
! Component: 1450  -  total flux cleaned = -0.00174448 Jy
! Component: 1500  -  total flux cleaned = -0.00189679 Jy
! Component: 1550  -  total flux cleaned = -0.00201706 Jy
! Component: 1600  -  total flux cleaned = -0.00218072 Jy
! Component: 1650  -  total flux cleaned = -0.0023423 Jy
! Component: 1700  -  total flux cleaned = -0.00245856 Jy
! Component: 1750  -  total flux cleaned = -0.0026307 Jy
! Component: 1800  -  total flux cleaned = -0.0027867 Jy
! Component: 1850  -  total flux cleaned = -0.00291278 Jy
! Component: 1900  -  total flux cleaned = -0.00305129 Jy
! Component: 1950  -  total flux cleaned = -0.00320197 Jy
! Component: 2000  -  total flux cleaned = -0.00335093 Jy
! Total flux subtracted in 2048 components = -0.00343127 Jy
! Clean residual min=-0.000715 max=0.000811 Jy/beam
! Clean residual mean=-0.000010 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.054848 Jy
keep
! Adding 124 model components to the UV plane model.
! The established model now contains 158 components and 0.054848 Jy
![Exited script file: muppet]
wmap "J1510-1121_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.96 x 12.68 at -19.77 degrees (North through East)
! Clean map  min=-0.0052123  max=0.065816 Jy/beam
! Writing clean map to FITS file: J1510-1121_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0658163 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000288302 
device "J1510-1121_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1510-1121_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.31412 1.31412 2.62825 5.25649 10.513 21.026 42.052 84.1039
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.065 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.96 x 12.68 at -19.77 degrees (North through East)
! Clean map  min=-0.0052123  max=0.065816 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1510-1121_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1510-1121_S_2011_08_02_pus_map.gif/vgif'
mapplot cln