! Started logfile: J1350+3034_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:16:01 2012
obs J1350+3034_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1350+3034_S_2011_08_02_pus_uva.fits
! AN table 1: 60 integrations on 78 of 78 possible baselines.
! AN table 2: 127 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.289593 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1350+3034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 16896 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1350+3034_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 352 telescope corrections were flagged in sub-array 1.
!  A total of 737 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 352 telescope corrections were flagged in sub-array 1.
!  A total of 737 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 352 telescope corrections were flagged in sub-array 1.
!  A total of 737 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 352 telescope corrections were flagged in sub-array 1.
!  A total of 737 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.777817Jy  sigma=0.010505
! Fit after  self-cal, rms=0.747271Jy  sigma=0.010121
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.371 mas, bmaj=8.138 mas, bpa=-0.6185 degrees
! Estimated noise=906.127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195592 Jy
! Component: 100  -  total flux cleaned = 0.238458 Jy
! Total flux subtracted in 100 components = 0.238458 Jy
! Clean residual min=-0.010100 max=0.016287 Jy/beam
! Clean residual mean=-0.000077 rms=0.002924 Jy/beam
! Combined flux in latest and established models = 0.238458 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.238458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114758Jy  sigma=0.001420
! Fit after  self-cal, rms=0.114732Jy  sigma=0.001420
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.371 mas, bmaj=9.459 mas, bpa=-0.5466 degrees
! Estimated noise=411.203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, -31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0215865 Jy
! Component: 100  -  total flux cleaned = 0.0331673 Jy
! Component: 150  -  total flux cleaned = 0.0373078 Jy
! Component: 200  -  total flux cleaned = 0.0413219 Jy
! Total flux subtracted in 200 components = 0.0413219 Jy
! Clean residual min=-0.006657 max=0.011026 Jy/beam
! Clean residual mean=-0.000015 rms=0.001873 Jy/beam
! Combined flux in latest and established models = 0.27978 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 48 components and 0.27978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110009Jy  sigma=0.001364
! Fit after  self-cal, rms=0.109820Jy  sigma=0.001361
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     FT        1.00*    HH        1.00*    
!   HN        1.09     KP        0.96     LA        1.00*    MK        0.87     
!   NL        0.93     OV        0.96     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        1.01     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.97     LA        1.04     MK        0.89     
!   NL        0.94     OV        0.96     PT        1.02     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.14     FT        1.00*    HH        1.00*    
!   HN        1.17     KP        1.03     LA        1.00*    MK        0.98     
!   NL        1.05     OV        1.05     PT        1.07     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.13     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.03     LA        0.94     MK        0.98     
!   NL        1.06     OV        1.06     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.13     FT        1.00*    HH        1.00*    
!   HN        1.09     KP        1.02     LA        1.00*    MK        0.99     
!   NL        1.07     OV        1.03     PT        1.04     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.10     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.02     LA        0.93     MK        0.98     
!   NL        1.06     OV        1.02     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.15     FT        1.00*    HH        1.00*    
!   HN        1.06     KP        0.92     LA        1.00*    MK        1.02     
!   NL        0.94     OV        0.91     PT        0.94     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.10     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.95     LA        0.77     MK        1.02     
!   NL        0.92     OV        0.88     PT        0.95     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.109820Jy  sigma=0.001361
! Fit after  self-cal, rms=0.103096Jy  sigma=0.001294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.419 mas, bmaj=9.536 mas, bpa=-0.3322 degrees
! Estimated noise=409.047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0018326 Jy
! Component: 100  -  total flux cleaned = -0.00167203 Jy
! Component: 150  -  total flux cleaned = -0.00156497 Jy
! Component: 200  -  total flux cleaned = -0.00156835 Jy
! Total flux subtracted in 200 components = -0.00156835 Jy
! Clean residual min=-0.002221 max=0.002740 Jy/beam
! Clean residual mean=-0.000011 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.278211 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.278211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102965Jy  sigma=0.001292
! Fit after  self-cal, rms=0.102956Jy  sigma=0.001291
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102956Jy  sigma=0.001291
! Fit after  self-cal, rms=0.102895Jy  sigma=0.001291
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.416 mas, bmaj=9.533 mas, bpa=-0.3062 degrees
! Estimated noise=409.477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000962049 Jy
! Component: 100  -  total flux cleaned = -0.000866547 Jy
! Component: 150  -  total flux cleaned = -0.00082741 Jy
! Component: 200  -  total flux cleaned = -0.000719411 Jy
! Total flux subtracted in 200 components = -0.000719411 Jy
! Clean residual min=-0.002028 max=0.002476 Jy/beam
! Clean residual mean=-0.000007 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.277492 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 73 components and 0.277492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102836Jy  sigma=0.001290
! Fit after  self-cal, rms=0.102827Jy  sigma=0.001290
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.27067e-05 Jy
! Component: 100  -  total flux cleaned = 4.03091e-05 Jy
! Component: 150  -  total flux cleaned = 9.92144e-05 Jy
! Component: 200  -  total flux cleaned = 0.000126805 Jy
! Total flux subtracted in 200 components = 0.000126805 Jy
! Clean residual min=-0.001999 max=0.002418 Jy/beam
! Clean residual mean=-0.000009 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.277619 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 0.277619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102807Jy  sigma=0.001290
! Fit after  self-cal, rms=0.102806Jy  sigma=0.001290
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102806Jy  sigma=0.001290
! Fit after  self-cal, rms=0.102556Jy  sigma=0.001288
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.413 mas, bmaj=9.53 mas, bpa=-0.2838 degrees
! Estimated noise=409.826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000350699 Jy
! Component: 100  -  total flux cleaned = -0.000240292 Jy
! Component: 150  -  total flux cleaned = -0.00029606 Jy
! Component: 200  -  total flux cleaned = -0.000321768 Jy
! Total flux subtracted in 200 components = -0.000321768 Jy
! Clean residual min=-0.002019 max=0.002295 Jy/beam
! Clean residual mean=-0.000007 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.277297 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.277297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102532Jy  sigma=0.001288
! Fit after  self-cal, rms=0.102526Jy  sigma=0.001288
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45, 35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881749 Jy
! Component: 100  -  total flux cleaned = 0.000663555 Jy
! Component: 150  -  total flux cleaned = 0.000407361 Jy
! Component: 200  -  total flux cleaned = 0.000154764 Jy
! Total flux subtracted in 200 components = 0.000154764 Jy
! Clean residual min=-0.001793 max=0.001759 Jy/beam
! Clean residual mean=-0.000003 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.277452 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 0.277452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102475Jy  sigma=0.001287
! Fit after  self-cal, rms=0.102472Jy  sigma=0.001287
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102472Jy  sigma=0.001287
! Fit after  self-cal, rms=0.102426Jy  sigma=0.001287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.978 mas, bmaj=10.31 mas, bpa=0.7178 degrees
! Estimated noise=434.437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000455432 Jy
! Component: 100  -  total flux cleaned = -0.000550745 Jy
! Component: 150  -  total flux cleaned = -0.000654302 Jy
! Component: 200  -  total flux cleaned = -0.00079091 Jy
! Total flux subtracted in 200 components = -0.00079091 Jy
! Clean residual min=-0.001325 max=0.001571 Jy/beam
! Clean residual mean=0.000007 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.276661 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 130 components and 0.276661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102415Jy  sigma=0.001287
! Fit after  self-cal, rms=0.102414Jy  sigma=0.001287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173313 Jy
! Component: 100  -  total flux cleaned = -0.000193827 Jy
! Component: 150  -  total flux cleaned = -0.000212914 Jy
! Component: 200  -  total flux cleaned = -0.000247544 Jy
! Total flux subtracted in 200 components = -0.000247544 Jy
! Clean residual min=-0.001291 max=0.001588 Jy/beam
! Clean residual mean=0.000007 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.276413 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 142 components and 0.276413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102410Jy  sigma=0.001287
! Fit after  self-cal, rms=0.102410Jy  sigma=0.001287
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.411 mas, bmaj=9.526 mas, bpa=-0.2744 degrees
! Estimated noise=409.898 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.411 x 9.526 at -0.2744 degrees (North through East)
! Clean map  min=-0.0031045  max=0.25566 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.388 mas, bmaj=8.224 mas, bpa=-0.3411 degrees
! Estimated noise=911.995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196667 Jy
! Component: 100  -  total flux cleaned = 0.239889 Jy
! Component: 150  -  total flux cleaned = 0.251664 Jy
! Component: 200  -  total flux cleaned = 0.258451 Jy
! Total flux subtracted in 200 components = 0.258451 Jy
! Clean residual min=-0.004873 max=0.004935 Jy/beam
! Clean residual mean=-0.000035 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.258451 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.258451 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.411 mas, bmaj=9.526 mas, bpa=-0.2744 degrees
! Estimated noise=409.898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00745236 Jy
! Component: 100  -  total flux cleaned = 0.0115761 Jy
! Component: 150  -  total flux cleaned = 0.0134117 Jy
! Component: 200  -  total flux cleaned = 0.0143915 Jy
! Total flux subtracted in 200 components = 0.0143915 Jy
! Clean residual min=-0.002257 max=0.002497 Jy/beam
! Clean residual mean=-0.000019 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.272843 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 57 components and 0.272843 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.849 mas, bmaj=9.784 mas, bpa=-0.2775 degrees
! Estimated noise=433.742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107938 Jy
! Component: 100  -  total flux cleaned = 0.00204451 Jy
! Component: 150  -  total flux cleaned = 0.00286193 Jy
! Component: 200  -  total flux cleaned = 0.00308437 Jy
! Total flux subtracted in 200 components = 0.00308437 Jy
! Clean residual min=-0.001897 max=0.002238 Jy/beam
! Clean residual mean=-0.000010 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.275927 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.529e-05 Jy
! Component: 100  -  total flux cleaned = 0.00015342 Jy
! Component: 150  -  total flux cleaned = 0.000243737 Jy
! Component: 200  -  total flux cleaned = 0.000368757 Jy
! Total flux subtracted in 200 components = 0.000368757 Jy
! Clean residual min=-0.001806 max=0.002027 Jy/beam
! Clean residual mean=-0.000007 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.276296 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 108 components and 0.276296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102432Jy  sigma=0.001287
! Fit after  self-cal, rms=0.102429Jy  sigma=0.001287
wmodel J1350+3034_S_2011_08_02_pus_map.mod
! Writing 108 model components to file: J1350+3034_S_2011_08_02_pus_map.mod
wobs J1350+3034_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1350+3034_S_2011_08_02_pus_uvs.fits
wwins J1350+3034_S_2011_08_02_pus_map.win
! wwins: Wrote 3 windows to J1350+3034_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132526 Jy
! Component: 100  -  total flux cleaned = -5.21431e-05 Jy
! Component: 150  -  total flux cleaned = -0.000198182 Jy
! Component: 200  -  total flux cleaned = -0.000389098 Jy
! Component: 250  -  total flux cleaned = -0.000572155 Jy
! Component: 300  -  total flux cleaned = -0.000698043 Jy
! Component: 350  -  total flux cleaned = -0.00089206 Jy
! Component: 400  -  total flux cleaned = -0.00103198 Jy
! Component: 450  -  total flux cleaned = -0.00112303 Jy
! Component: 500  -  total flux cleaned = -0.00118881 Jy
! Component: 550  -  total flux cleaned = -0.00121001 Jy
! Component: 600  -  total flux cleaned = -0.00120997 Jy
! Component: 650  -  total flux cleaned = -0.00127099 Jy
! Component: 700  -  total flux cleaned = -0.00133055 Jy
! Component: 750  -  total flux cleaned = -0.00138869 Jy
! Component: 800  -  total flux cleaned = -0.00142691 Jy
! Component: 850  -  total flux cleaned = -0.00150212 Jy
! Component: 900  -  total flux cleaned = -0.00155792 Jy
! Component: 950  -  total flux cleaned = -0.00163072 Jy
! Component: 1000  -  total flux cleaned = -0.00166672 Jy
! Component: 1050  -  total flux cleaned = -0.001737 Jy
! Component: 1100  -  total flux cleaned = -0.0017714 Jy
! Component: 1150  -  total flux cleaned = -0.00178815 Jy
! Component: 1200  -  total flux cleaned = -0.00180472 Jy
! Component: 1250  -  total flux cleaned = -0.00178841 Jy
! Component: 1300  -  total flux cleaned = -0.00182099 Jy
! Component: 1350  -  total flux cleaned = -0.00183703 Jy
! Component: 1400  -  total flux cleaned = -0.00180535 Jy
! Component: 1450  -  total flux cleaned = -0.00180568 Jy
! Component: 1500  -  total flux cleaned = -0.001806 Jy
! Component: 1550  -  total flux cleaned = -0.00186747 Jy
! Component: 1600  -  total flux cleaned = -0.00188257 Jy
! Component: 1650  -  total flux cleaned = -0.00191246 Jy
! Component: 1700  -  total flux cleaned = -0.00194191 Jy
! Component: 1750  -  total flux cleaned = -0.0019567 Jy
! Component: 1800  -  total flux cleaned = -0.00197133 Jy
! Component: 1850  -  total flux cleaned = -0.00201414 Jy
! Component: 1900  -  total flux cleaned = -0.00200021 Jy
! Component: 1950  -  total flux cleaned = -0.00205609 Jy
! Component: 2000  -  total flux cleaned = -0.00206961 Jy
! Total flux subtracted in 2048 components = -0.00205581 Jy
! Clean residual min=-0.000679 max=0.000990 Jy/beam
! Clean residual mean=-0.000004 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.27424 Jy
keep
! Adding 145 model components to the UV plane model.
! The established model now contains 253 components and 0.27424 Jy
![Exited script file: muppet]
wmap "J1350+3034_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.849 x 9.784 at -0.2775 degrees (North through East)
! Clean map  min=-0.0025567  max=0.25536 Jy/beam
! Writing clean map to FITS file: J1350+3034_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.255359 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000291658 
device "J1350+3034_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1350+3034_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.342644 0.342644 0.685288 1.37058 2.74115 5.4823 10.9646 21.9292 43.8584 87.7168
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.255 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.849 x 9.784 at -0.2775 degrees (North through East)
! Clean map  min=-0.0025567  max=0.25536 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1350+3034_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1350+3034_S_2011_08_02_pus_map.gif/vgif'
mapplot cln