! Started logfile: J1154+1225_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:53:08 2012 obs J1154+1225_X_2011_08_02_pus_uva.fits ! Reading UV FITS file: J1154+1225_X_2011_08_02_pus_uva.fits ! AN table 1: 181 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.384403 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1154+1225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3146 lines of history. ! ! Reading 21708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1154+1225_X_2011_08_02_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 867 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 867 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 912 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 867 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953219Jy sigma=0.011025 ! Fit after self-cal, rms=0.907233Jy sigma=0.010531 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8505 mas, bmaj=2.88 mas, bpa=-21.49 degrees ! Estimated noise=991.741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731379 Jy ! Component: 100 - total flux cleaned = 0.0970109 Jy ! Total flux subtracted in 100 components = 0.0970109 Jy ! Clean residual min=-0.008179 max=0.010942 Jy/beam ! Clean residual mean=-0.000034 rms=0.002265 Jy/beam ! Combined flux in latest and established models = 0.0970109 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0970109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134402Jy sigma=0.001410 ! Fit after self-cal, rms=0.134051Jy sigma=0.001406 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.15 mas, bmaj=2.997 mas, bpa=-21.79 degrees ! Estimated noise=420.661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162823 Jy ! Component: 100 - total flux cleaned = 0.0235973 Jy ! Component: 150 - total flux cleaned = 0.0276646 Jy ! Component: 200 - total flux cleaned = 0.0301879 Jy ! Total flux subtracted in 200 components = 0.0301879 Jy ! Clean residual min=-0.004638 max=0.005243 Jy/beam ! Clean residual mean=0.000016 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.127199 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.127199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132231Jy sigma=0.001384 ! Fit after self-cal, rms=0.132107Jy sigma=0.001382 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 FT 1.00* HH 1.00* ! HN 1.09 KP 0.88 LA 0.98 MK 0.86 ! NL 1.10 OV 1.01 PT 1.03 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 FT 1.00* HH 1.00* ! HN 1.19 KP 0.86 LA 1.05 MK 0.93 ! NL 1.14 OV 1.07 PT 1.09 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 FT 1.00* HH 1.00* ! HN 0.88 KP 0.79 LA 0.97 MK 1.19 ! NL 1.11 OV 1.06 PT 1.01 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 FT 1.00* HH 1.00* ! HN 0.78 KP 0.84 LA 1.09 MK 1.07 ! NL 1.20 OV 1.10 PT 1.07 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.132107Jy sigma=0.001382 ! Fit after self-cal, rms=0.127979Jy sigma=0.001372 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.155 mas, bmaj=2.963 mas, bpa=-21.77 degrees ! Estimated noise=416.752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135475 Jy ! Component: 100 - total flux cleaned = 0.00144466 Jy ! Component: 150 - total flux cleaned = 0.00140844 Jy ! Component: 200 - total flux cleaned = 0.00137543 Jy ! Total flux subtracted in 200 components = 0.00137543 Jy ! Clean residual min=-0.002310 max=0.002723 Jy/beam ! Clean residual mean=-0.000004 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.128574 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.128574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127943Jy sigma=0.001372 ! Fit after self-cal, rms=0.127983Jy sigma=0.001370 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127983Jy sigma=0.001370 ! Fit after self-cal, rms=0.127913Jy sigma=0.001368 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.144 mas, bmaj=2.962 mas, bpa=-21.72 degrees ! Estimated noise=415.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720293 Jy ! Component: 100 - total flux cleaned = 0.000720949 Jy ! Component: 150 - total flux cleaned = 0.000720287 Jy ! Component: 200 - total flux cleaned = 0.000688999 Jy ! Total flux subtracted in 200 components = 0.000688999 Jy ! Clean residual min=-0.002246 max=0.002610 Jy/beam ! Clean residual mean=-0.000008 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.129263 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.129263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127890Jy sigma=0.001368 ! Fit after self-cal, rms=0.127955Jy sigma=0.001368 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.32739e-05 Jy ! Component: 100 - total flux cleaned = -0.000130771 Jy ! Component: 150 - total flux cleaned = -0.000158178 Jy ! Component: 200 - total flux cleaned = -0.000183492 Jy ! Total flux subtracted in 200 components = -0.000183492 Jy ! Clean residual min=-0.002313 max=0.002574 Jy/beam ! Clean residual mean=-0.000008 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.12908 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.12908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127939Jy sigma=0.001368 ! Fit after self-cal, rms=0.127935Jy sigma=0.001368 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127935Jy sigma=0.001368 ! Fit after self-cal, rms=0.128258Jy sigma=0.001368 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.132 mas, bmaj=2.965 mas, bpa=-21.74 degrees ! Estimated noise=414.838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848981 Jy ! Component: 100 - total flux cleaned = 0.000791342 Jy ! Component: 150 - total flux cleaned = 0.000766791 Jy ! Component: 200 - total flux cleaned = 0.000742925 Jy ! Total flux subtracted in 200 components = 0.000742925 Jy ! Clean residual min=-0.002214 max=0.002521 Jy/beam ! Clean residual mean=-0.000008 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.129823 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.129823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128241Jy sigma=0.001367 ! Fit after self-cal, rms=0.128259Jy sigma=0.001367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.2917e-05 Jy ! Component: 100 - total flux cleaned = -1.15657e-05 Jy ! Component: 150 - total flux cleaned = 1.24122e-05 Jy ! Component: 200 - total flux cleaned = 1.19849e-05 Jy ! Total flux subtracted in 200 components = 1.19849e-05 Jy ! Clean residual min=-0.002215 max=0.002512 Jy/beam ! Clean residual mean=-0.000008 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.129835 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.129835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128248Jy sigma=0.001367 ! Fit after self-cal, rms=0.128243Jy sigma=0.001367 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128243Jy sigma=0.001367 ! Fit after self-cal, rms=0.128334Jy sigma=0.001367 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.55 mas, bmaj=3.22 mas, bpa=-16.37 degrees ! Estimated noise=470.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215826 Jy ! Component: 100 - total flux cleaned = 0.000244901 Jy ! Component: 150 - total flux cleaned = 0.000222618 Jy ! Component: 200 - total flux cleaned = 0.000205153 Jy ! Total flux subtracted in 200 components = 0.000205153 Jy ! Clean residual min=-0.002013 max=0.002394 Jy/beam ! Clean residual mean=-0.000014 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.13004 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.13004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128329Jy sigma=0.001367 ! Fit after self-cal, rms=0.128337Jy sigma=0.001367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.48671e-05 Jy ! Component: 100 - total flux cleaned = -6.98486e-05 Jy ! Component: 150 - total flux cleaned = -8.31834e-05 Jy ! Component: 200 - total flux cleaned = -8.28122e-05 Jy ! Total flux subtracted in 200 components = -8.28122e-05 Jy ! Clean residual min=-0.002030 max=0.002382 Jy/beam ! Clean residual mean=-0.000014 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.129957 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.129957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128336Jy sigma=0.001367 ! Fit after self-cal, rms=0.128334Jy sigma=0.001367 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.119 mas, bmaj=2.969 mas, bpa=-21.77 degrees ! Estimated noise=414.178 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.119 x 2.969 at -21.77 degrees (North through East) ! Clean map min=-0.0019169 max=0.08999 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8347 mas, bmaj=2.871 mas, bpa=-21.39 degrees ! Estimated noise=942.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0704568 Jy ! Component: 100 - total flux cleaned = 0.0983703 Jy ! Component: 150 - total flux cleaned = 0.113196 Jy ! Component: 200 - total flux cleaned = 0.121127 Jy ! Total flux subtracted in 200 components = 0.121127 Jy ! Clean residual min=-0.005489 max=0.005763 Jy/beam ! Clean residual mean=-0.000016 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.121127 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.121127 Jy ! Inverting map and beam ! Estimated beam: bmin=1.119 mas, bmaj=2.969 mas, bpa=-21.77 degrees ! Estimated noise=414.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045511 Jy ! Component: 100 - total flux cleaned = 0.00673244 Jy ! Component: 150 - total flux cleaned = 0.00741147 Jy ! Component: 200 - total flux cleaned = 0.00773421 Jy ! Total flux subtracted in 200 components = 0.00773421 Jy ! Clean residual min=-0.002401 max=0.002504 Jy/beam ! Clean residual mean=-0.000012 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.128862 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.128862 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.126 mas, bmaj=2.957 mas, bpa=-21.76 degrees ! Estimated noise=446.752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386392 Jy ! Component: 100 - total flux cleaned = 0.000537856 Jy ! Component: 150 - total flux cleaned = 0.000638952 Jy ! Component: 200 - total flux cleaned = 0.000731218 Jy ! Total flux subtracted in 200 components = 0.000731218 Jy ! Clean residual min=-0.002448 max=0.002627 Jy/beam ! Clean residual mean=-0.000009 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.129593 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.74047e-05 Jy ! Component: 100 - total flux cleaned = 8.36033e-05 Jy ! Component: 150 - total flux cleaned = 0.00010883 Jy ! Component: 200 - total flux cleaned = 0.000131714 Jy ! Total flux subtracted in 200 components = 0.000131714 Jy ! Clean residual min=-0.002365 max=0.002635 Jy/beam ! Clean residual mean=-0.000009 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.129725 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.129725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128325Jy sigma=0.001367 ! Fit after self-cal, rms=0.128302Jy sigma=0.001367 wmodel J1154+1225_X_2011_08_02_pus_map.mod ! Writing 39 model components to file: J1154+1225_X_2011_08_02_pus_map.mod wobs J1154+1225_X_2011_08_02_pus_uvs.fits ! Writing UV FITS file: J1154+1225_X_2011_08_02_pus_uvs.fits wwins J1154+1225_X_2011_08_02_pus_map.win ! wwins: Wrote 1 windows to J1154+1225_X_2011_08_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401972 Jy ! Component: 100 - total flux cleaned = 0.000274359 Jy ! Component: 150 - total flux cleaned = 0.000113894 Jy ! Component: 200 - total flux cleaned = 0.000270043 Jy ! Component: 250 - total flux cleaned = 0.000344482 Jy ! Component: 300 - total flux cleaned = 0.000451455 Jy ! Component: 350 - total flux cleaned = 0.000557477 Jy ! Component: 400 - total flux cleaned = 0.000728319 Jy ! Component: 450 - total flux cleaned = 0.00082764 Jy ! Component: 500 - total flux cleaned = 0.000988424 Jy ! Component: 550 - total flux cleaned = 0.00101974 Jy ! Component: 600 - total flux cleaned = 0.0010814 Jy ! Component: 650 - total flux cleaned = 0.00114155 Jy ! Component: 700 - total flux cleaned = 0.00120055 Jy ! Component: 750 - total flux cleaned = 0.00120055 Jy ! Component: 800 - total flux cleaned = 0.00114443 Jy ! Component: 850 - total flux cleaned = 0.00114418 Jy ! Component: 900 - total flux cleaned = 0.000980898 Jy ! Component: 950 - total flux cleaned = 0.000874743 Jy ! Component: 1000 - total flux cleaned = 0.000822413 Jy ! Component: 1050 - total flux cleaned = 0.000770891 Jy ! Component: 1100 - total flux cleaned = 0.000694817 Jy ! Component: 1150 - total flux cleaned = 0.000620589 Jy ! Component: 1200 - total flux cleaned = 0.000595896 Jy ! Component: 1250 - total flux cleaned = 0.000523472 Jy ! Component: 1300 - total flux cleaned = 0.000451987 Jy ! Component: 1350 - total flux cleaned = 0.000358453 Jy ! Component: 1400 - total flux cleaned = 0.000335267 Jy ! Component: 1450 - total flux cleaned = 0.00024432 Jy ! Component: 1500 - total flux cleaned = 0.000109742 Jy ! Component: 1550 - total flux cleaned = -2.2995e-05 Jy ! Component: 1600 - total flux cleaned = -6.68078e-05 Jy ! Component: 1650 - total flux cleaned = -0.00028291 Jy ! Component: 1700 - total flux cleaned = -0.000389412 Jy ! Component: 1750 - total flux cleaned = -0.000431754 Jy ! Component: 1800 - total flux cleaned = -0.00051529 Jy ! Component: 1850 - total flux cleaned = -0.000638962 Jy ! Component: 1900 - total flux cleaned = -0.000741001 Jy ! Component: 1950 - total flux cleaned = -0.000781158 Jy ! Component: 2000 - total flux cleaned = -0.00086128 Jy ! Total flux subtracted in 2048 components = -0.000960113 Jy ! Clean residual min=-0.001292 max=0.001340 Jy/beam ! Clean residual mean=-0.000005 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.128764 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 171 components and 0.128764 Jy ![Exited script file: muppet] wmap "J1154+1225_X_2011_08_02_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.126 x 2.957 at -21.76 degrees (North through East) ! Clean map min=-0.0022134 max=0.0896 Jy/beam ! Writing clean map to FITS file: J1154+1225_X_2011_08_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0895999 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000388662 device "J1154+1225_X_2011_08_02_pus\_map.eps/VPS" ! Attempting to open device: 'J1154+1225_X_2011_08_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30133 1.30133 2.60265 5.20531 10.4106 20.8212 41.6425 83.2849 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.126 x 2.957 at -21.76 degrees (North through East) ! Clean map min=-0.0022134 max=0.0896 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1154+1225_X_2011_08_02_pus\_map.gif/vgif" ! Attempting to open device: 'J1154+1225_X_2011_08_02_pus_map.gif/vgif' mapplot cln