! Started logfile: J1154+1225_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:15:27 2012
obs J1154+1225_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1154+1225_S_2011_08_02_pus_uva.fits
! AN table 1: 181 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.348633 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1154+1225
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 19688 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1154+1225_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 933 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 978 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 933 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 978 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.947486Jy  sigma=0.012721
! Fit after  self-cal, rms=0.924021Jy  sigma=0.012456
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.443 mas, bmaj=10.08 mas, bpa=-20.61 degrees
! Estimated noise=730.282 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0610533 Jy
! Component: 100  -  total flux cleaned = 0.0754733 Jy
! Total flux subtracted in 100 components = 0.0754733 Jy
! Clean residual min=-0.005020 max=0.005950 Jy/beam
! Clean residual mean=0.000054 rms=0.001677 Jy/beam
! Combined flux in latest and established models = 0.0754733 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0754733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105778Jy  sigma=0.001327
! Fit after  self-cal, rms=0.105603Jy  sigma=0.001326
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.162 mas, bmaj=10.68 mas, bpa=-20.01 degrees
! Estimated noise=384.33 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00717681 Jy
! Component: 100  -  total flux cleaned = 0.00990434 Jy
! Component: 150  -  total flux cleaned = 0.0109189 Jy
! Component: 200  -  total flux cleaned = 0.0110897 Jy
! Total flux subtracted in 200 components = 0.0110897 Jy
! Clean residual min=-0.003124 max=0.004739 Jy/beam
! Clean residual mean=0.000064 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.086563 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 47 components and 0.086563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105136Jy  sigma=0.001320
! Fit after  self-cal, rms=0.105147Jy  sigma=0.001320
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.11     FT        1.00*    HH        1.00*    
!   HN        1.15     KP        0.97     LA        1.06     MK        0.77     
!   NL        0.94     OV        0.96     PT        1.08     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.21     FT        1.00*    HH        1.00*    
!   HN        1.19     KP        1.04     LA        0.95     MK        1.29     
!   NL        1.05     OV        1.05     PT        1.06     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.19     FT        1.00*    HH        1.00*    
!   HN        1.21     KP        1.05     LA        0.88     MK        0.92     
!   NL        1.02     OV        1.02     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.18     FT        1.00*    HH        1.00*    
!   HN        0.98     KP        0.93     LA        0.73     MK        1.47     
!   NL        0.91     OV        0.82     PT        0.96     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.105147Jy  sigma=0.001320
! Fit after  self-cal, rms=0.105256Jy  sigma=0.001305
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.193 mas, bmaj=10.73 mas, bpa=-20.12 degrees
! Estimated noise=382.99 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.36697e-05 Jy
! Component: 100  -  total flux cleaned = 8.10901e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102404 Jy
! Component: 200  -  total flux cleaned = 0.000121735 Jy
! Total flux subtracted in 200 components = 0.000121735 Jy
! Clean residual min=-0.001556 max=0.001818 Jy/beam
! Clean residual mean=0.000025 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0866847 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.0866847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105240Jy  sigma=0.001305
! Fit after  self-cal, rms=0.105421Jy  sigma=0.001304
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105421Jy  sigma=0.001304
! Fit after  self-cal, rms=0.106195Jy  sigma=0.001303
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.174 mas, bmaj=10.77 mas, bpa=-20.3 degrees
! Estimated noise=383.124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122035 Jy
! Component: 100  -  total flux cleaned = 0.000142941 Jy
! Component: 150  -  total flux cleaned = 0.000164248 Jy
! Component: 200  -  total flux cleaned = 0.000182708 Jy
! Total flux subtracted in 200 components = 0.000182708 Jy
! Clean residual min=-0.001547 max=0.001710 Jy/beam
! Clean residual mean=0.000019 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0868674 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.0868674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106181Jy  sigma=0.001303
! Fit after  self-cal, rms=0.106227Jy  sigma=0.001303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.66525e-05 Jy
! Component: 100  -  total flux cleaned = 6.56281e-05 Jy
! Component: 150  -  total flux cleaned = 8.29869e-05 Jy
! Component: 200  -  total flux cleaned = 9.99691e-05 Jy
! Total flux subtracted in 200 components = 9.99691e-05 Jy
! Clean residual min=-0.001538 max=0.001721 Jy/beam
! Clean residual mean=0.000019 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0869674 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 0.0869674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106217Jy  sigma=0.001303
! Fit after  self-cal, rms=0.106215Jy  sigma=0.001303
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106215Jy  sigma=0.001303
! Fit after  self-cal, rms=0.106045Jy  sigma=0.001303
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.136 mas, bmaj=10.79 mas, bpa=-20.37 degrees
! Estimated noise=384.303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580395 Jy
! Component: 100  -  total flux cleaned = 0.000597426 Jy
! Component: 150  -  total flux cleaned = 0.000613402 Jy
! Component: 200  -  total flux cleaned = 0.000628702 Jy
! Total flux subtracted in 200 components = 0.000628702 Jy
! Clean residual min=-0.001551 max=0.001741 Jy/beam
! Clean residual mean=0.000018 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0875961 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 0.0875961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106033Jy  sigma=0.001302
! Fit after  self-cal, rms=0.106025Jy  sigma=0.001302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.73924e-05 Jy
! Component: 100  -  total flux cleaned = 4.9382e-05 Jy
! Component: 150  -  total flux cleaned = 6.47423e-05 Jy
! Component: 200  -  total flux cleaned = 7.90514e-05 Jy
! Total flux subtracted in 200 components = 7.90514e-05 Jy
! Clean residual min=-0.001558 max=0.001742 Jy/beam
! Clean residual mean=0.000017 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.0876751 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 88 components and 0.0876751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106018Jy  sigma=0.001302
! Fit after  self-cal, rms=0.106015Jy  sigma=0.001302
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106015Jy  sigma=0.001302
! Fit after  self-cal, rms=0.105722Jy  sigma=0.001302
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.845 mas, bmaj=11.86 mas, bpa=-7.295 degrees
! Estimated noise=410.779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000455137 Jy
! Component: 100  -  total flux cleaned = 0.000567712 Jy
! Component: 150  -  total flux cleaned = 0.000586554 Jy
! Component: 200  -  total flux cleaned = 0.000591768 Jy
! Total flux subtracted in 200 components = 0.000591768 Jy
! Clean residual min=-0.001418 max=0.001638 Jy/beam
! Clean residual mean=0.000028 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.0882669 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 102 components and 0.0882669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105720Jy  sigma=0.001302
! Fit after  self-cal, rms=0.105710Jy  sigma=0.001302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.00451e-05 Jy
! Component: 100  -  total flux cleaned = 2.55416e-05 Jy
! Component: 150  -  total flux cleaned = 2.56753e-05 Jy
! Component: 200  -  total flux cleaned = 3.00475e-05 Jy
! Total flux subtracted in 200 components = 3.00475e-05 Jy
! Clean residual min=-0.001418 max=0.001644 Jy/beam
! Clean residual mean=0.000028 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.0882969 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 108 components and 0.088297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105709Jy  sigma=0.001302
! Fit after  self-cal, rms=0.105708Jy  sigma=0.001302
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.098 mas, bmaj=10.8 mas, bpa=-20.44 degrees
! Estimated noise=385.226 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.098 x 10.8 at -20.44 degrees (North through East)
! Clean map  min=-0.0015342  max=0.07924 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.444 mas, bmaj=10.21 mas, bpa=-21.31 degrees
! Estimated noise=731.407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0611182 Jy
! Component: 100  -  total flux cleaned = 0.0766742 Jy
! Component: 150  -  total flux cleaned = 0.0842094 Jy
! Component: 200  -  total flux cleaned = 0.0860095 Jy
! Total flux subtracted in 200 components = 0.0860095 Jy
! Clean residual min=-0.004542 max=0.003744 Jy/beam
! Clean residual mean=0.000011 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.0860095 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0860095 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.098 mas, bmaj=10.8 mas, bpa=-20.44 degrees
! Estimated noise=385.226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192008 Jy
! Component: 100  -  total flux cleaned = 0.00191744 Jy
! Component: 150  -  total flux cleaned = 0.00195259 Jy
! Component: 200  -  total flux cleaned = 0.00198201 Jy
! Total flux subtracted in 200 components = 0.00198201 Jy
! Clean residual min=-0.001711 max=0.001858 Jy/beam
! Clean residual mean=0.000020 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0879915 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.0879915 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.738 mas, bmaj=10.9 mas, bpa=-21.1 degrees
! Estimated noise=415.325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.7742e-05 Jy
! Component: 100  -  total flux cleaned = 1.08028e-05 Jy
! Component: 150  -  total flux cleaned = 8.53327e-05 Jy
! Component: 200  -  total flux cleaned = 0.000151707 Jy
! Total flux subtracted in 200 components = 0.000151707 Jy
! Clean residual min=-0.002005 max=0.001948 Jy/beam
! Clean residual mean=0.000022 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0881432 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.99585e-05 Jy
! Component: 100  -  total flux cleaned = 0.000116585 Jy
! Component: 150  -  total flux cleaned = 0.00015134 Jy
! Component: 200  -  total flux cleaned = 0.000168171 Jy
! Total flux subtracted in 200 components = 0.000168171 Jy
! Clean residual min=-0.001989 max=0.001922 Jy/beam
! Clean residual mean=0.000021 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.0883114 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 55 components and 0.0883114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105688Jy  sigma=0.001302
! Fit after  self-cal, rms=0.105664Jy  sigma=0.001302
wmodel J1154+1225_S_2011_08_02_pus_map.mod
! Writing 55 model components to file: J1154+1225_S_2011_08_02_pus_map.mod
wobs J1154+1225_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1154+1225_S_2011_08_02_pus_uvs.fits
wwins J1154+1225_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J1154+1225_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.7028e-05 Jy
! Component: 100  -  total flux cleaned = -2.43862e-05 Jy
! Component: 150  -  total flux cleaned = -8.25957e-05 Jy
! Component: 200  -  total flux cleaned = -5.41556e-05 Jy
! Component: 250  -  total flux cleaned = -5.4245e-05 Jy
! Component: 300  -  total flux cleaned = -0.000130491 Jy
! Component: 350  -  total flux cleaned = -0.000203278 Jy
! Component: 400  -  total flux cleaned = -0.000274534 Jy
! Component: 450  -  total flux cleaned = -0.000343373 Jy
! Component: 500  -  total flux cleaned = -0.000365502 Jy
! Component: 550  -  total flux cleaned = -0.000365547 Jy
! Component: 600  -  total flux cleaned = -0.000429522 Jy
! Component: 650  -  total flux cleaned = -0.000407793 Jy
! Component: 700  -  total flux cleaned = -0.00042818 Jy
! Component: 750  -  total flux cleaned = -0.000468761 Jy
! Component: 800  -  total flux cleaned = -0.000587082 Jy
! Component: 850  -  total flux cleaned = -0.000606031 Jy
! Component: 900  -  total flux cleaned = -0.000644228 Jy
! Component: 950  -  total flux cleaned = -0.00071937 Jy
! Component: 1000  -  total flux cleaned = -0.000848453 Jy
! Component: 1050  -  total flux cleaned = -0.000957723 Jy
! Component: 1100  -  total flux cleaned = -0.00104751 Jy
! Component: 1150  -  total flux cleaned = -0.00117132 Jy
! Component: 1200  -  total flux cleaned = -0.00129324 Jy
! Component: 1250  -  total flux cleaned = -0.00134481 Jy
! Component: 1300  -  total flux cleaned = -0.00144691 Jy
! Component: 1350  -  total flux cleaned = -0.00156449 Jy
! Component: 1400  -  total flux cleaned = -0.00164727 Jy
! Component: 1450  -  total flux cleaned = -0.00172914 Jy
! Component: 1500  -  total flux cleaned = -0.00185887 Jy
! Component: 1550  -  total flux cleaned = -0.00197112 Jy
! Component: 1600  -  total flux cleaned = -0.0021141 Jy
! Component: 1650  -  total flux cleaned = -0.00227135 Jy
! Component: 1700  -  total flux cleaned = -0.0023957 Jy
! Component: 1750  -  total flux cleaned = -0.00248824 Jy
! Component: 1800  -  total flux cleaned = -0.00262577 Jy
! Component: 1850  -  total flux cleaned = -0.00276193 Jy
! Component: 1900  -  total flux cleaned = -0.00288193 Jy
! Component: 1950  -  total flux cleaned = -0.00303052 Jy
! Component: 2000  -  total flux cleaned = -0.00317774 Jy
! Total flux subtracted in 2048 components = -0.00333826 Jy
! Clean residual min=-0.000875 max=0.000816 Jy/beam
! Clean residual mean=0.000011 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0849731 Jy
keep
! Adding 119 model components to the UV plane model.
! The established model now contains 174 components and 0.0849731 Jy
![Exited script file: muppet]
wmap "J1154+1225_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.738 x 10.9 at -21.1 degrees (North through East)
! Clean map  min=-0.001958  max=0.077908 Jy/beam
! Writing clean map to FITS file: J1154+1225_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0779078 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000301395 
device "J1154+1225_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1154+1225_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.16058 1.16058 2.32117 4.64233 9.28467 18.5693 37.1387 74.2773
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.077 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.738 x 10.9 at -21.1 degrees (North through East)
! Clean map  min=-0.001958  max=0.077908 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1154+1225_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1154+1225_S_2011_08_02_pus_map.gif/vgif'
mapplot cln