! Started logfile: J1128+1039_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:15:13 2012
obs J1128+1039_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1128+1039_S_2011_08_02_pus_uva.fits
! AN table 1: 93 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.391232 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1128+1039
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 11352 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1128+1039_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 438 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 461 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 438 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 461 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008361Jy  sigma=0.012846
! Fit after  self-cal, rms=0.948062Jy  sigma=0.012124
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=9.936 mas, bpa=-19.82 degrees
! Estimated noise=962.098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465859 Jy
! Component: 100  -  total flux cleaned = 0.0526776 Jy
! Total flux subtracted in 100 components = 0.0526776 Jy
! Clean residual min=-0.006719 max=0.006048 Jy/beam
! Clean residual mean=-0.000033 rms=0.001691 Jy/beam
! Combined flux in latest and established models = 0.0526776 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0526776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115834Jy  sigma=0.001280
! Fit after  self-cal, rms=0.113992Jy  sigma=0.001256
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.675 mas, bmaj=11.07 mas, bpa=-18.68 degrees
! Estimated noise=540.283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224044 Jy
! Component: 100  -  total flux cleaned = 0.00178974 Jy
! Component: 150  -  total flux cleaned = 0.0013019 Jy
! Component: 200  -  total flux cleaned = 0.000900811 Jy
! Total flux subtracted in 200 components = 0.000900811 Jy
! Clean residual min=-0.003690 max=0.003407 Jy/beam
! Clean residual mean=0.000023 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.0535784 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 21 components and 0.0535784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113467Jy  sigma=0.001252
! Fit after  self-cal, rms=0.113226Jy  sigma=0.001251
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     FT        1.00*    HH        1.00*    
!   HN        0.84     KP        1.05     LA        1.15     MK        0.71     
!   NL        0.94     OV        1.01     PT        1.15     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.19     FT        1.00*    HH        1.00*    
!   HN        0.78     KP        1.03     LA        0.89     MK        0.86     
!   NL        1.05     OV        1.10     PT        1.11     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.30     FT        1.00*    HH        1.00*    
!   HN        0.77     KP        1.02     LA        0.84     MK        0.99     
!   NL        1.09     OV        1.09     PT        1.08     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.10     FT        1.00*    HH        1.00*    
!   HN        0.74     KP        1.00     LA        0.71     MK        0.97     
!   NL        0.95     OV        0.85     PT        1.01     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.113226Jy  sigma=0.001251
! Fit after  self-cal, rms=0.102955Jy  sigma=0.001241
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.391 mas, bmaj=11.26 mas, bpa=-19.2 degrees
! Estimated noise=531.883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000320032 Jy
! Component: 100  -  total flux cleaned = 0.000399007 Jy
! Component: 150  -  total flux cleaned = 0.000398943 Jy
! Component: 200  -  total flux cleaned = 0.000370394 Jy
! Total flux subtracted in 200 components = 0.000370394 Jy
! Clean residual min=-0.002328 max=0.002202 Jy/beam
! Clean residual mean=0.000005 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.0539488 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 0.0539488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102929Jy  sigma=0.001241
! Fit after  self-cal, rms=0.102825Jy  sigma=0.001237
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102825Jy  sigma=0.001237
! Fit after  self-cal, rms=0.102038Jy  sigma=0.001235
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.295 mas, bmaj=11.39 mas, bpa=-19.2 degrees
! Estimated noise=533.603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121744 Jy
! Component: 100  -  total flux cleaned = 0.00131498 Jy
! Component: 150  -  total flux cleaned = 0.00136885 Jy
! Component: 200  -  total flux cleaned = 0.00143742 Jy
! Total flux subtracted in 200 components = 0.00143742 Jy
! Clean residual min=-0.002191 max=0.002552 Jy/beam
! Clean residual mean=0.000007 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0553862 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.0553862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102014Jy  sigma=0.001234
! Fit after  self-cal, rms=0.102167Jy  sigma=0.001233
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270079 Jy
! Component: 100  -  total flux cleaned = -0.000323885 Jy
! Component: 150  -  total flux cleaned = -0.000300045 Jy
! Component: 200  -  total flux cleaned = -0.000258493 Jy
! Total flux subtracted in 200 components = -0.000258493 Jy
! Clean residual min=-0.002307 max=0.002495 Jy/beam
! Clean residual mean=0.000012 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0551277 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.0551277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102156Jy  sigma=0.001233
! Fit after  self-cal, rms=0.102155Jy  sigma=0.001233
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102155Jy  sigma=0.001233
! Fit after  self-cal, rms=0.103048Jy  sigma=0.001233
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.247 mas, bmaj=11.48 mas, bpa=-19.26 degrees
! Estimated noise=535.296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122053 Jy
! Component: 100  -  total flux cleaned = 0.00122078 Jy
! Component: 150  -  total flux cleaned = 0.00123872 Jy
! Component: 200  -  total flux cleaned = 0.00127313 Jy
! Total flux subtracted in 200 components = 0.00127313 Jy
! Clean residual min=-0.002221 max=0.002605 Jy/beam
! Clean residual mean=0.000006 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0564008 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.0564008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103031Jy  sigma=0.001232
! Fit after  self-cal, rms=0.103157Jy  sigma=0.001232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.91088e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105182 Jy
! Component: 150  -  total flux cleaned = -0.000105044 Jy
! Component: 200  -  total flux cleaned = -8.8453e-05 Jy
! Total flux subtracted in 200 components = -8.8453e-05 Jy
! Clean residual min=-0.002274 max=0.002718 Jy/beam
! Clean residual mean=0.000009 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.0563124 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.0563124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103149Jy  sigma=0.001232
! Fit after  self-cal, rms=0.103149Jy  sigma=0.001232
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103149Jy  sigma=0.001232
! Fit after  self-cal, rms=0.103857Jy  sigma=0.001232
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.355 mas, bmaj=12.41 mas, bpa=-13 degrees
! Estimated noise=612.253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535402 Jy
! Component: 100  -  total flux cleaned = 0.000642551 Jy
! Component: 150  -  total flux cleaned = 0.000677353 Jy
! Component: 200  -  total flux cleaned = 0.000708568 Jy
! Total flux subtracted in 200 components = 0.000708568 Jy
! Clean residual min=-0.002330 max=0.002458 Jy/beam
! Clean residual mean=0.000014 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.0570209 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.057021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103850Jy  sigma=0.001232
! Fit after  self-cal, rms=0.103940Jy  sigma=0.001232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.32365e-05 Jy
! Component: 100  -  total flux cleaned = 1.27965e-05 Jy
! Component: 150  -  total flux cleaned = 4.48908e-05 Jy
! Component: 200  -  total flux cleaned = 7.39414e-05 Jy
! Total flux subtracted in 200 components = 7.39414e-05 Jy
! Clean residual min=-0.002337 max=0.002503 Jy/beam
! Clean residual mean=0.000014 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.0570949 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.0570949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103937Jy  sigma=0.001231
! Fit after  self-cal, rms=0.103940Jy  sigma=0.001231
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.215 mas, bmaj=11.55 mas, bpa=-19.3 degrees
! Estimated noise=537.022 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.215 x 11.55 at -19.3 degrees (North through East)
! Clean map  min=-0.0038146  max=0.059775 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.173 mas, bmaj=10.57 mas, bpa=-19.87 degrees
! Estimated noise=889.523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.046932 Jy
! Component: 100  -  total flux cleaned = 0.0560756 Jy
! Component: 150  -  total flux cleaned = 0.05839 Jy
! Component: 200  -  total flux cleaned = 0.0592257 Jy
! Total flux subtracted in 200 components = 0.0592257 Jy
! Clean residual min=-0.004427 max=0.004895 Jy/beam
! Clean residual mean=0.000014 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.0592258 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0592258 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.215 mas, bmaj=11.55 mas, bpa=-19.3 degrees
! Estimated noise=537.022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000550135 Jy
! Component: 100  -  total flux cleaned = -0.000902946 Jy
! Component: 150  -  total flux cleaned = -0.00124377 Jy
! Component: 200  -  total flux cleaned = -0.00143094 Jy
! Total flux subtracted in 200 components = -0.00143094 Jy
! Clean residual min=-0.002348 max=0.002710 Jy/beam
! Clean residual mean=0.000007 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0577948 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.0577948 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.199 mas, bmaj=11.43 mas, bpa=-19.41 degrees
! Estimated noise=582.833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.85654e-05 Jy
! Component: 100  -  total flux cleaned = -3.25311e-05 Jy
! Component: 150  -  total flux cleaned = -9.91916e-05 Jy
! Component: 200  -  total flux cleaned = -0.000158193 Jy
! Total flux subtracted in 200 components = -0.000158193 Jy
! Clean residual min=-0.002383 max=0.002969 Jy/beam
! Clean residual mean=0.000014 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.0576366 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.69465e-05 Jy
! Component: 100  -  total flux cleaned = -7.57546e-05 Jy
! Component: 150  -  total flux cleaned = -7.63005e-05 Jy
! Component: 200  -  total flux cleaned = -9.76591e-05 Jy
! Total flux subtracted in 200 components = -9.76591e-05 Jy
! Clean residual min=-0.002342 max=0.002962 Jy/beam
! Clean residual mean=0.000014 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.057539 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 43 components and 0.057539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103946Jy  sigma=0.001232
! Fit after  self-cal, rms=0.103937Jy  sigma=0.001232
wmodel J1128+1039_S_2011_08_02_pus_map.mod
! Writing 43 model components to file: J1128+1039_S_2011_08_02_pus_map.mod
wobs J1128+1039_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1128+1039_S_2011_08_02_pus_uvs.fits
wwins J1128+1039_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J1128+1039_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632145 Jy
! Component: 100  -  total flux cleaned = 0.00029164 Jy
! Component: 150  -  total flux cleaned = -2.83217e-05 Jy
! Component: 200  -  total flux cleaned = -0.000370641 Jy
! Component: 250  -  total flux cleaned = -0.000623213 Jy
! Component: 300  -  total flux cleaned = -0.000830182 Jy
! Component: 350  -  total flux cleaned = -0.000863986 Jy
! Component: 400  -  total flux cleaned = -0.000832997 Jy
! Component: 450  -  total flux cleaned = -0.000864085 Jy
! Component: 500  -  total flux cleaned = -0.000893922 Jy
! Component: 550  -  total flux cleaned = -0.000893098 Jy
! Component: 600  -  total flux cleaned = -0.00092055 Jy
! Component: 650  -  total flux cleaned = -0.000920321 Jy
! Component: 700  -  total flux cleaned = -0.000867179 Jy
! Component: 750  -  total flux cleaned = -0.000945983 Jy
! Component: 800  -  total flux cleaned = -0.000971266 Jy
! Component: 850  -  total flux cleaned = -0.000995892 Jy
! Component: 900  -  total flux cleaned = -0.00102026 Jy
! Component: 950  -  total flux cleaned = -0.00102043 Jy
! Component: 1000  -  total flux cleaned = -0.00102079 Jy
! Component: 1050  -  total flux cleaned = -0.0010209 Jy
! Component: 1100  -  total flux cleaned = -0.00106618 Jy
! Component: 1150  -  total flux cleaned = -0.000999818 Jy
! Component: 1200  -  total flux cleaned = -0.000999967 Jy
! Component: 1250  -  total flux cleaned = -0.000957091 Jy
! Component: 1300  -  total flux cleaned = -0.000936099 Jy
! Component: 1350  -  total flux cleaned = -0.000915451 Jy
! Component: 1400  -  total flux cleaned = -0.000915563 Jy
! Component: 1450  -  total flux cleaned = -0.000955848 Jy
! Component: 1500  -  total flux cleaned = -0.000995427 Jy
! Component: 1550  -  total flux cleaned = -0.000994892 Jy
! Component: 1600  -  total flux cleaned = -0.000995006 Jy
! Component: 1650  -  total flux cleaned = -0.00107104 Jy
! Component: 1700  -  total flux cleaned = -0.0011084 Jy
! Component: 1750  -  total flux cleaned = -0.00108975 Jy
! Component: 1800  -  total flux cleaned = -0.001108 Jy
! Component: 1850  -  total flux cleaned = -0.00116235 Jy
! Component: 1900  -  total flux cleaned = -0.00116236 Jy
! Component: 1950  -  total flux cleaned = -0.00116274 Jy
! Component: 2000  -  total flux cleaned = -0.00119762 Jy
! Total flux subtracted in 2048 components = -0.00118053 Jy
! Clean residual min=-0.001021 max=0.000979 Jy/beam
! Clean residual mean=0.000009 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0563584 Jy
keep
! Adding 143 model components to the UV plane model.
! The established model now contains 186 components and 0.0563584 Jy
![Exited script file: muppet]
wmap "J1128+1039_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.199 x 11.43 at -19.41 degrees (North through East)
! Clean map  min=-0.0035855  max=0.059802 Jy/beam
! Writing clean map to FITS file: J1128+1039_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0598017 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000378138 
device "J1128+1039_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1128+1039_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.89696 1.89696 3.79392 7.58784 15.1757 30.3513 60.7027
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.059 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.199 x 11.43 at -19.41 degrees (North through East)
! Clean map  min=-0.0035855  max=0.059802 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1128+1039_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1128+1039_S_2011_08_02_pus_map.gif/vgif'
mapplot cln