! Started logfile: J1029-1852_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:15:02 2012
obs J1029-1852_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1029-1852_S_2011_08_02_pus_uva.fits
! AN table 1: 206 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.11999 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1029-1852
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 7712 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1029-1852_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1787 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1787 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1787 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1787 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.654421Jy  sigma=0.007637
! Fit after  self-cal, rms=0.558975Jy  sigma=0.006662
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=12.94 mas, bpa=-13.74 degrees
! Estimated noise=1249.61 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.350463 Jy
! Component: 100  -  total flux cleaned = 0.430708 Jy
! Total flux subtracted in 100 components = 0.430708 Jy
! Clean residual min=-0.023604 max=0.032585 Jy/beam
! Clean residual mean=-0.000122 rms=0.007155 Jy/beam
! Combined flux in latest and established models = 0.430708 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.430708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136161Jy  sigma=0.001502
! Fit after  self-cal, rms=0.136084Jy  sigma=0.001501
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.758 mas, bmaj=13.31 mas, bpa=-12.62 degrees
! Estimated noise=701.98 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0292447 Jy
! Component: 100  -  total flux cleaned = 0.037697 Jy
! Component: 150  -  total flux cleaned = 0.0385687 Jy
! Component: 200  -  total flux cleaned = 0.0382043 Jy
! Total flux subtracted in 200 components = 0.0382043 Jy
! Clean residual min=-0.014854 max=0.023228 Jy/beam
! Clean residual mean=-0.000050 rms=0.005952 Jy/beam
! Combined flux in latest and established models = 0.468912 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 22 components and 0.468912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128300Jy  sigma=0.001436
! Fit after  self-cal, rms=0.128175Jy  sigma=0.001435
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.09     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.97     LA        1.00*    MK        0.86     
!   NL        0.91     OV        0.96     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.21     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.03     LA        1.00*    MK        0.97     
!   NL        1.03     OV        1.08     PT        1.04     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.20     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.01     LA        1.00*    MK        0.98     
!   NL        1.03     OV        1.02     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.19     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.93     LA        1.00*    MK        1.04     
!   NL        0.92     OV        0.88     PT        0.93     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.128175Jy  sigma=0.001435
! Fit after  self-cal, rms=0.110455Jy  sigma=0.001243
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.626 mas, bmaj=13.27 mas, bpa=-12.98 degrees
! Estimated noise=732.157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104205 Jy
! Component: 100  -  total flux cleaned = 0.00103941 Jy
! Component: 150  -  total flux cleaned = 0.00111799 Jy
! Component: 200  -  total flux cleaned = 0.0011913 Jy
! Total flux subtracted in 200 components = 0.0011913 Jy
! Clean residual min=-0.007334 max=0.012422 Jy/beam
! Clean residual mean=-0.000075 rms=0.002620 Jy/beam
! Combined flux in latest and established models = 0.470103 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 34 components and 0.470103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110329Jy  sigma=0.001241
! Fit after  self-cal, rms=0.110228Jy  sigma=0.001241
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110228Jy  sigma=0.001241
! Fit after  self-cal, rms=0.110019Jy  sigma=0.001240
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.62 mas, bmaj=13.26 mas, bpa=-12.99 degrees
! Estimated noise=731.894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100785 Jy
! Component: 100  -  total flux cleaned = 0.00114257 Jy
! Component: 150  -  total flux cleaned = 0.00133215 Jy
! Component: 200  -  total flux cleaned = 0.00139543 Jy
! Total flux subtracted in 200 components = 0.00139543 Jy
! Clean residual min=-0.007033 max=0.011837 Jy/beam
! Clean residual mean=-0.000071 rms=0.002548 Jy/beam
! Combined flux in latest and established models = 0.471499 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.471499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109953Jy  sigma=0.001239
! Fit after  self-cal, rms=0.109944Jy  sigma=0.001239
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.5, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102051 Jy
! Component: 100  -  total flux cleaned = 0.0145216 Jy
! Component: 150  -  total flux cleaned = 0.015785 Jy
! Component: 200  -  total flux cleaned = 0.0169734 Jy
! Total flux subtracted in 200 components = 0.0169734 Jy
! Clean residual min=-0.005225 max=0.004832 Jy/beam
! Clean residual mean=0.000005 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.488472 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 73 components and 0.488472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109025Jy  sigma=0.001228
! Fit after  self-cal, rms=0.108975Jy  sigma=0.001227
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108975Jy  sigma=0.001227
! Fit after  self-cal, rms=0.108425Jy  sigma=0.001223
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.624 mas, bmaj=13.27 mas, bpa=-12.96 degrees
! Estimated noise=730.52 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183613 Jy
! Component: 100  -  total flux cleaned = 0.002481 Jy
! Component: 150  -  total flux cleaned = 0.00312113 Jy
! Component: 200  -  total flux cleaned = 0.00378609 Jy
! Total flux subtracted in 200 components = 0.00378609 Jy
! Clean residual min=-0.004130 max=0.003867 Jy/beam
! Clean residual mean=0.000017 rms=0.001238 Jy/beam
! Combined flux in latest and established models = 0.492258 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.492258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108307Jy  sigma=0.001222
! Fit after  self-cal, rms=0.108308Jy  sigma=0.001222
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000714932 Jy
! Component: 100  -  total flux cleaned = 0.00115822 Jy
! Component: 150  -  total flux cleaned = 0.00146115 Jy
! Component: 200  -  total flux cleaned = 0.00177294 Jy
! Total flux subtracted in 200 components = 0.00177294 Jy
! Clean residual min=-0.004041 max=0.003626 Jy/beam
! Clean residual mean=0.000028 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.494031 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 129 components and 0.494031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108271Jy  sigma=0.001221
! Fit after  self-cal, rms=0.108272Jy  sigma=0.001221
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108272Jy  sigma=0.001221
! Fit after  self-cal, rms=0.108135Jy  sigma=0.001221
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.788 mas, bmaj=18.61 mas, bpa=15.32 degrees
! Estimated noise=849.936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.78845e-05 Jy
! Component: 100  -  total flux cleaned = 0.000198903 Jy
! Component: 150  -  total flux cleaned = 0.000322741 Jy
! Component: 200  -  total flux cleaned = 0.000437911 Jy
! Total flux subtracted in 200 components = 0.000437911 Jy
! Clean residual min=-0.005285 max=0.003608 Jy/beam
! Clean residual mean=0.000038 rms=0.001626 Jy/beam
! Combined flux in latest and established models = 0.494469 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 151 components and 0.494469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108117Jy  sigma=0.001221
! Fit after  self-cal, rms=0.108109Jy  sigma=0.001221
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.64985e-05 Jy
! Component: 100  -  total flux cleaned = 5.16137e-05 Jy
! Component: 150  -  total flux cleaned = 0.000119567 Jy
! Component: 200  -  total flux cleaned = 0.000184375 Jy
! Total flux subtracted in 200 components = 0.000184375 Jy
! Clean residual min=-0.005246 max=0.003543 Jy/beam
! Clean residual mean=0.000039 rms=0.001590 Jy/beam
! Combined flux in latest and established models = 0.494654 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 164 components and 0.494654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108104Jy  sigma=0.001221
! Fit after  self-cal, rms=0.108100Jy  sigma=0.001220
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=13.28 mas, bpa=-12.97 degrees
! Estimated noise=729.896 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.625 x 13.28 at -12.97 degrees (North through East)
! Clean map  min=-0.0065822  max=0.44714 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=13.04 mas, bpa=-14.13 degrees
! Estimated noise=1297.96 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.346316 Jy
! Component: 100  -  total flux cleaned = 0.423146 Jy
! Component: 150  -  total flux cleaned = 0.451296 Jy
! Component: 200  -  total flux cleaned = 0.467163 Jy
! Total flux subtracted in 200 components = 0.467163 Jy
! Clean residual min=-0.008410 max=0.008195 Jy/beam
! Clean residual mean=-0.000057 rms=0.002252 Jy/beam
! Combined flux in latest and established models = 0.467162 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.467162 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=13.28 mas, bpa=-12.97 degrees
! Estimated noise=729.896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111583 Jy
! Component: 100  -  total flux cleaned = 0.0165344 Jy
! Component: 150  -  total flux cleaned = 0.0187109 Jy
! Component: 200  -  total flux cleaned = 0.0205013 Jy
! Total flux subtracted in 200 components = 0.0205013 Jy
! Clean residual min=-0.005028 max=0.004085 Jy/beam
! Clean residual mean=-0.000003 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.487664 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 51 components and 0.487664 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.421 mas, bmaj=13.44 mas, bpa=-13.58 degrees
! Estimated noise=752.235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149269 Jy
! Component: 100  -  total flux cleaned = 0.00286394 Jy
! Component: 150  -  total flux cleaned = 0.00418373 Jy
! Component: 200  -  total flux cleaned = 0.00532097 Jy
! Total flux subtracted in 200 components = 0.00532097 Jy
! Clean residual min=-0.004056 max=0.003453 Jy/beam
! Clean residual mean=0.000023 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.492985 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928312 Jy
! Component: 100  -  total flux cleaned = 0.0015838 Jy
! Component: 150  -  total flux cleaned = 0.00202578 Jy
! Component: 200  -  total flux cleaned = 0.00238542 Jy
! Total flux subtracted in 200 components = 0.00238542 Jy
! Clean residual min=-0.003779 max=0.003202 Jy/beam
! Clean residual mean=0.000032 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.49537 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 91 components and 0.49537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108090Jy  sigma=0.001220
! Fit after  self-cal, rms=0.108083Jy  sigma=0.001220
wmodel J1029-1852_S_2011_08_02_pus_map.mod
! Writing 91 model components to file: J1029-1852_S_2011_08_02_pus_map.mod
wobs J1029-1852_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1029-1852_S_2011_08_02_pus_uvs.fits
wwins J1029-1852_S_2011_08_02_pus_map.win
! wwins: Wrote 2 windows to J1029-1852_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000812537 Jy
! Component: 100  -  total flux cleaned = -0.000648961 Jy
! Component: 150  -  total flux cleaned = -0.000599155 Jy
! Component: 200  -  total flux cleaned = -0.000468193 Jy
! Component: 250  -  total flux cleaned = -0.000506511 Jy
! Component: 300  -  total flux cleaned = -0.000577925 Jy
! Component: 350  -  total flux cleaned = -0.000610898 Jy
! Component: 400  -  total flux cleaned = -0.000736386 Jy
! Component: 450  -  total flux cleaned = -0.000882703 Jy
! Component: 500  -  total flux cleaned = -0.000882353 Jy
! Component: 550  -  total flux cleaned = -0.0008564 Jy
! Component: 600  -  total flux cleaned = -0.000730045 Jy
! Component: 650  -  total flux cleaned = -0.000657144 Jy
! Component: 700  -  total flux cleaned = -0.000563787 Jy
! Component: 750  -  total flux cleaned = -0.000473138 Jy
! Component: 800  -  total flux cleaned = -0.000341713 Jy
! Component: 850  -  total flux cleaned = -0.000215362 Jy
! Component: 900  -  total flux cleaned = -0.000195366 Jy
! Component: 950  -  total flux cleaned = -0.000115718 Jy
! Component: 1000  -  total flux cleaned = -3.81252e-05 Jy
! Component: 1050  -  total flux cleaned = 5.63897e-05 Jy
! Component: 1100  -  total flux cleaned = 3.79243e-05 Jy
! Component: 1150  -  total flux cleaned = 2.01242e-05 Jy
! Component: 1200  -  total flux cleaned = 2.02089e-05 Jy
! Component: 1250  -  total flux cleaned = -3.17177e-05 Jy
! Component: 1300  -  total flux cleaned = -9.9083e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000197977 Jy
! Component: 1400  -  total flux cleaned = -0.000262653 Jy
! Component: 1450  -  total flux cleaned = -0.000342184 Jy
! Component: 1500  -  total flux cleaned = -0.000450926 Jy
! Component: 1550  -  total flux cleaned = -0.000542105 Jy
! Component: 1600  -  total flux cleaned = -0.000571625 Jy
! Component: 1650  -  total flux cleaned = -0.000659791 Jy
! Component: 1700  -  total flux cleaned = -0.000775337 Jy
! Component: 1750  -  total flux cleaned = -0.000817915 Jy
! Component: 1800  -  total flux cleaned = -0.000887738 Jy
! Component: 1850  -  total flux cleaned = -0.000915176 Jy
! Component: 1900  -  total flux cleaned = -0.000982885 Jy
! Component: 1950  -  total flux cleaned = -0.00106234 Jy
! Component: 2000  -  total flux cleaned = -0.00108851 Jy
! Total flux subtracted in 2048 components = -0.00112712 Jy
! Clean residual min=-0.000754 max=0.000987 Jy/beam
! Clean residual mean=0.000004 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.494243 Jy
keep
! Adding 164 model components to the UV plane model.
! The established model now contains 255 components and 0.494243 Jy
![Exited script file: muppet]
wmap "J1029-1852_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.421 x 13.44 at -13.58 degrees (North through East)
! Clean map  min=-0.0018127  max=0.44523 Jy/beam
! Writing clean map to FITS file: J1029-1852_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.445228 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000275736 
device "J1029-1852_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1029-1852_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.185795 0.185795 0.371589 0.743179 1.48636 2.97272 5.94543 11.8909 23.7817 47.5634 95.1269
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.445 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.421 x 13.44 at -13.58 degrees (North through East)
! Clean map  min=-0.0018127  max=0.44523 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1029-1852_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1029-1852_S_2011_08_02_pus_map.gif/vgif'
mapplot cln