! Started logfile: J0808+4052_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:14:15 2012
obs J0808+4052_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J0808+4052_S_2011_08_02_pus_uva.fits
! AN table 1: 346 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.218764 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0808+4052
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 23616 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0808+4052_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2588 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2588 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2588 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2588 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.778473Jy  sigma=0.007706
! Fit after  self-cal, rms=0.685929Jy  sigma=0.006437
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.656 mas, bmaj=2.841 mas, bpa=44.96 degrees
! Estimated noise=1052.94 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.266034 Jy
! Component: 100  -  total flux cleaned = 0.328047 Jy
! Total flux subtracted in 100 components = 0.328047 Jy
! Clean residual min=-0.017782 max=0.023979 Jy/beam
! Clean residual mean=0.000349 rms=0.004374 Jy/beam
! Combined flux in latest and established models = 0.328047 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.328047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203636Jy  sigma=0.001545
! Fit after  self-cal, rms=0.203673Jy  sigma=0.001545
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=3.783 mas, bpa=43.87 degrees
! Estimated noise=514.894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344346 Jy
! Component: 100  -  total flux cleaned = 0.0528207 Jy
! Component: 150  -  total flux cleaned = 0.0639738 Jy
! Component: 200  -  total flux cleaned = 0.070952 Jy
! Total flux subtracted in 200 components = 0.070952 Jy
! Clean residual min=-0.012385 max=0.016964 Jy/beam
! Clean residual mean=0.000675 rms=0.003844 Jy/beam
! Combined flux in latest and established models = 0.398999 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 34 components and 0.398999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199292Jy  sigma=0.001455
! Fit after  self-cal, rms=0.199238Jy  sigma=0.001453
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     FT        1.00*    HH        1.06     
!   HN        1.07     KP        0.92     LA        1.00     MK        0.84     
!   NL        0.92     OV        0.92     PT        1.00     TS        1.00*    
!   WZ        1.05     
! 
! 
! Correcting IF 2.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.20     FT        1.00*    HH        1.10     
!   HN        1.18     KP        0.98     LA        0.92     MK        0.93     
!   NL        1.02     OV        1.02     PT        0.98     TS        1.00*    
!   WZ        0.98     
! 
! 
! Correcting IF 3.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.17     FT        1.00*    HH        0.91     
!   HN        1.07     KP        0.97     LA        0.87     MK        0.92     
!   NL        1.01     OV        0.97     PT        0.96     TS        1.00*    
!   WZ        0.95     
! 
! 
! Correcting IF 4.
!  A total of 141 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.19     FT        1.00*    HH        0.92     
!   HN        1.03     KP        0.88     LA        0.72     MK        0.99     
!   NL        0.91     OV        0.82     PT        0.87     TS        1.00*    
!   WZ        1.01     
! 
! 
! Fit before self-cal, rms=0.199238Jy  sigma=0.001453
! Fit after  self-cal, rms=0.194300Jy  sigma=0.001346
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=3.742 mas, bpa=43.14 degrees
! Estimated noise=511.609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.5, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111964 Jy
! Component: 100  -  total flux cleaned = 0.0119756 Jy
! Component: 150  -  total flux cleaned = 0.0119608 Jy
! Component: 200  -  total flux cleaned = 0.011577 Jy
! Total flux subtracted in 200 components = 0.011577 Jy
! Clean residual min=-0.005676 max=0.007695 Jy/beam
! Clean residual mean=-0.000053 rms=0.001586 Jy/beam
! Combined flux in latest and established models = 0.410576 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 57 components and 0.410576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193770Jy  sigma=0.001335
! Fit after  self-cal, rms=0.193487Jy  sigma=0.001332
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193487Jy  sigma=0.001332
! Fit after  self-cal, rms=0.189650Jy  sigma=0.001326
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.23 mas, bmaj=3.733 mas, bpa=43.28 degrees
! Estimated noise=510.306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403159 Jy
! Component: 100  -  total flux cleaned = 0.00476374 Jy
! Component: 150  -  total flux cleaned = 0.00494562 Jy
! Component: 200  -  total flux cleaned = 0.00494057 Jy
! Total flux subtracted in 200 components = 0.00494057 Jy
! Clean residual min=-0.003525 max=0.004883 Jy/beam
! Clean residual mean=-0.000019 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.415517 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.415517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189502Jy  sigma=0.001323
! Fit after  self-cal, rms=0.189366Jy  sigma=0.001322
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468866 Jy
! Component: 100  -  total flux cleaned = 0.00581639 Jy
! Component: 150  -  total flux cleaned = 0.00614939 Jy
! Component: 200  -  total flux cleaned = 0.00622221 Jy
! Total flux subtracted in 200 components = 0.00622221 Jy
! Clean residual min=-0.003225 max=0.003588 Jy/beam
! Clean residual mean=-0.000081 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.421739 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.421739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189253Jy  sigma=0.001320
! Fit after  self-cal, rms=0.189220Jy  sigma=0.001320
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189220Jy  sigma=0.001320
! Fit after  self-cal, rms=0.189053Jy  sigma=0.001319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.229 mas, bmaj=3.733 mas, bpa=43.27 degrees
! Estimated noise=509.368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165612 Jy
! Component: 100  -  total flux cleaned = 0.00206582 Jy
! Component: 150  -  total flux cleaned = 0.00212712 Jy
! Component: 200  -  total flux cleaned = 0.00218313 Jy
! Total flux subtracted in 200 components = 0.00218313 Jy
! Clean residual min=-0.002919 max=0.002791 Jy/beam
! Clean residual mean=-0.000079 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.423922 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.423922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189006Jy  sigma=0.001319
! Fit after  self-cal, rms=0.188986Jy  sigma=0.001318
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000460865 Jy
! Component: 100  -  total flux cleaned = 0.000513093 Jy
! Component: 150  -  total flux cleaned = 0.000512798 Jy
! Component: 200  -  total flux cleaned = 0.000557952 Jy
! Total flux subtracted in 200 components = 0.000557952 Jy
! Clean residual min=-0.002890 max=0.002637 Jy/beam
! Clean residual mean=-0.000086 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.42448 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.42448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188957Jy  sigma=0.001318
! Fit after  self-cal, rms=0.188950Jy  sigma=0.001318
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188950Jy  sigma=0.001318
! Fit after  self-cal, rms=0.188749Jy  sigma=0.001318
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.69 mas, bmaj=10.6 mas, bpa=-34.72 degrees
! Estimated noise=575.282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000432275 Jy
! Component: 100  -  total flux cleaned = 0.000406881 Jy
! Component: 150  -  total flux cleaned = 0.000428218 Jy
! Component: 200  -  total flux cleaned = 0.000407228 Jy
! Total flux subtracted in 200 components = 0.000407228 Jy
! Clean residual min=-0.002277 max=0.002300 Jy/beam
! Clean residual mean=-0.000167 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.424887 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 116 components and 0.424887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188747Jy  sigma=0.001318
! Fit after  self-cal, rms=0.188727Jy  sigma=0.001318
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285062 Jy
! Component: 100  -  total flux cleaned = 0.000366229 Jy
! Component: 150  -  total flux cleaned = 0.000366473 Jy
! Component: 200  -  total flux cleaned = 0.000347637 Jy
! Total flux subtracted in 200 components = 0.000347637 Jy
! Clean residual min=-0.002296 max=0.002367 Jy/beam
! Clean residual mean=-0.000176 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.425235 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 121 components and 0.425235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188728Jy  sigma=0.001318
! Fit after  self-cal, rms=0.188719Jy  sigma=0.001318
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.228 mas, bmaj=3.731 mas, bpa=43.29 degrees
! Estimated noise=509.206 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.228 x 3.731 at 43.29 degrees (North through East)
! Clean map  min=-0.0025634  max=0.33686 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.678 mas, bmaj=2.799 mas, bpa=44.55 degrees
! Estimated noise=1028.12 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.25865 Jy
! Component: 100  -  total flux cleaned = 0.319407 Jy
! Component: 150  -  total flux cleaned = 0.347331 Jy
! Component: 200  -  total flux cleaned = 0.365688 Jy
! Total flux subtracted in 200 components = 0.365688 Jy
! Clean residual min=-0.008711 max=0.010175 Jy/beam
! Clean residual mean=0.000136 rms=0.002143 Jy/beam
! Combined flux in latest and established models = 0.365689 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.365689 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.228 mas, bmaj=3.731 mas, bpa=43.29 degrees
! Estimated noise=509.206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205322 Jy
! Component: 100  -  total flux cleaned = 0.0329079 Jy
! Component: 150  -  total flux cleaned = 0.0410012 Jy
! Component: 200  -  total flux cleaned = 0.0466705 Jy
! Total flux subtracted in 200 components = 0.0466705 Jy
! Clean residual min=-0.003970 max=0.003413 Jy/beam
! Clean residual mean=0.000050 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.412359 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 64 components and 0.412359 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.751 mas, bmaj=3.408 mas, bpa=45.81 degrees
! Estimated noise=722.348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396173 Jy
! Component: 100  -  total flux cleaned = 0.00697879 Jy
! Component: 150  -  total flux cleaned = 0.0091208 Jy
! Component: 200  -  total flux cleaned = 0.010121 Jy
! Total flux subtracted in 200 components = 0.010121 Jy
! Clean residual min=-0.003978 max=0.003175 Jy/beam
! Clean residual mean=-0.000042 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.42248 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744241 Jy
! Component: 100  -  total flux cleaned = 0.00122166 Jy
! Component: 150  -  total flux cleaned = 0.00154041 Jy
! Component: 200  -  total flux cleaned = 0.00184241 Jy
! Total flux subtracted in 200 components = 0.00184241 Jy
! Clean residual min=-0.003723 max=0.003132 Jy/beam
! Clean residual mean=-0.000057 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.424322 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 95 components and 0.424322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188708Jy  sigma=0.001318
! Fit after  self-cal, rms=0.188695Jy  sigma=0.001318
wmodel J0808+4052_S_2011_08_02_pus_map.mod
! Writing 95 model components to file: J0808+4052_S_2011_08_02_pus_map.mod
wobs J0808+4052_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J0808+4052_S_2011_08_02_pus_uvs.fits
wwins J0808+4052_S_2011_08_02_pus_map.win
! wwins: Wrote 4 windows to J0808+4052_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029464 Jy
! Component: 100  -  total flux cleaned = -0.000459558 Jy
! Component: 150  -  total flux cleaned = -0.000512063 Jy
! Component: 200  -  total flux cleaned = -0.000460373 Jy
! Component: 250  -  total flux cleaned = -0.000657749 Jy
! Component: 300  -  total flux cleaned = -0.000850659 Jy
! Component: 350  -  total flux cleaned = -0.000944323 Jy
! Component: 400  -  total flux cleaned = -0.0009444 Jy
! Component: 450  -  total flux cleaned = -0.00112333 Jy
! Component: 500  -  total flux cleaned = -0.0012114 Jy
! Component: 550  -  total flux cleaned = -0.00147116 Jy
! Component: 600  -  total flux cleaned = -0.00164129 Jy
! Component: 650  -  total flux cleaned = -0.00189335 Jy
! Component: 700  -  total flux cleaned = -0.002059 Jy
! Component: 750  -  total flux cleaned = -0.00234408 Jy
! Component: 800  -  total flux cleaned = -0.00246461 Jy
! Component: 850  -  total flux cleaned = -0.00258326 Jy
! Component: 900  -  total flux cleaned = -0.00266222 Jy
! Component: 950  -  total flux cleaned = -0.00281793 Jy
! Component: 1000  -  total flux cleaned = -0.0030098 Jy
! Component: 1050  -  total flux cleaned = -0.00319902 Jy
! Component: 1100  -  total flux cleaned = -0.00319919 Jy
! Component: 1150  -  total flux cleaned = -0.00345892 Jy
! Component: 1200  -  total flux cleaned = -0.00353228 Jy
! Component: 1250  -  total flux cleaned = -0.00364082 Jy
! Component: 1300  -  total flux cleaned = -0.0037129 Jy
! Component: 1350  -  total flux cleaned = -0.00389022 Jy
! Component: 1400  -  total flux cleaned = -0.00385524 Jy
! Component: 1450  -  total flux cleaned = -0.00409868 Jy
! Component: 1500  -  total flux cleaned = -0.00413298 Jy
! Component: 1550  -  total flux cleaned = -0.00416724 Jy
! Component: 1600  -  total flux cleaned = -0.00430275 Jy
! Component: 1650  -  total flux cleaned = -0.0043027 Jy
! Component: 1700  -  total flux cleaned = -0.00433634 Jy
! Component: 1750  -  total flux cleaned = -0.00453384 Jy
! Component: 1800  -  total flux cleaned = -0.00466376 Jy
! Component: 1850  -  total flux cleaned = -0.00463116 Jy
! Component: 1900  -  total flux cleaned = -0.00472684 Jy
! Component: 1950  -  total flux cleaned = -0.00475861 Jy
! Component: 2000  -  total flux cleaned = -0.00482142 Jy
! Total flux subtracted in 2048 components = -0.00500785 Jy
! Clean residual min=-0.002089 max=0.001666 Jy/beam
! Clean residual mean=-0.000005 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.419315 Jy
keep
! Adding 145 model components to the UV plane model.
! The established model now contains 240 components and 0.419315 Jy
![Exited script file: muppet]
wmap "J0808+4052_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.751 x 3.408 at 45.81 degrees (North through East)
! Clean map  min=-0.0026997  max=0.32956 Jy/beam
! Writing clean map to FITS file: J0808+4052_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.329564 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000551302 
device "J0808+4052_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J0808+4052_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.501846 0.501846 1.00369 2.00739 4.01477 8.02954 16.0591 32.1182 64.2363
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.329 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.751 x 3.408 at 45.81 degrees (North through East)
! Clean map  min=-0.0026997  max=0.32956 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0808+4052_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J0808+4052_S_2011_08_02_pus_map.gif/vgif'
mapplot cln