! Started logfile: J0443+3441_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:50:45 2012
obs J0443+3441_X_2011_08_02_pus_uva.fits
! Reading UV FITS file: J0443+3441_X_2011_08_02_pus_uva.fits
! AN table 1: 36 integrations on 78 of 78 possible baselines.
! AN table 2: 254 integrations on 78 of 78 possible baselines.
! AN table 3: 22 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.222633 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0443+3441
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3146 lines of history.
! 
! Reading 21672 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0443+3441_X_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 351 telescope corrections were flagged in sub-array 1.
!  A total of 1873 telescope corrections were flagged in sub-array 2.
!  A total of 136 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 351 telescope corrections were flagged in sub-array 1.
!  A total of 1719 telescope corrections were flagged in sub-array 2.
!  A total of 136 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 351 telescope corrections were flagged in sub-array 1.
!  A total of 1782 telescope corrections were flagged in sub-array 2.
!  A total of 136 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 351 telescope corrections were flagged in sub-array 1.
!  A total of 1873 telescope corrections were flagged in sub-array 2.
!  A total of 136 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=0.808288Jy  sigma=0.006652
! Fit after  self-cal, rms=0.711718Jy  sigma=0.005949
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=0.6905 mas, bmaj=1.188 mas, bpa=46.79 degrees
! Estimated noise=1290.7 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.244691 Jy
! Component: 100  -  total flux cleaned = 0.314795 Jy
! Total flux subtracted in 100 components = 0.314795 Jy
! Clean residual min=-0.021967 max=0.064912 Jy/beam
! Clean residual mean=-0.000017 rms=0.006159 Jy/beam
! Combined flux in latest and established models = 0.314795 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.314795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203847Jy  sigma=0.001585
! Fit after  self-cal, rms=0.203918Jy  sigma=0.001584
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Added new window around map position (-0.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0582469 Jy
! Component: 100  -  total flux cleaned = 0.0884883 Jy
! Total flux subtracted in 100 components = 0.0884883 Jy
! Clean residual min=-0.015937 max=0.022827 Jy/beam
! Clean residual mean=-0.000109 rms=0.003608 Jy/beam
! Combined flux in latest and established models = 0.403283 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.403283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189830Jy  sigma=0.001418
! Fit after  self-cal, rms=0.188770Jy  sigma=0.001407
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226101 Jy
! Component: 100  -  total flux cleaned = 0.0355998 Jy
! Total flux subtracted in 100 components = 0.0355998 Jy
! Clean residual min=-0.011898 max=0.012749 Jy/beam
! Clean residual mean=-0.000144 rms=0.002875 Jy/beam
! Combined flux in latest and established models = 0.438883 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.438883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187800Jy  sigma=0.001391
! Fit after  self-cal, rms=0.187666Jy  sigma=0.001390
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=1.06 mas, bmaj=1.972 mas, bpa=49.58 degrees
! Estimated noise=618.735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00302135 Jy
! Component: 100  -  total flux cleaned = -0.00332531 Jy
! Component: 150  -  total flux cleaned = -0.00340355 Jy
! Component: 200  -  total flux cleaned = -0.00339567 Jy
! Total flux subtracted in 200 components = -0.00339567 Jy
! Clean residual min=-0.011005 max=0.007862 Jy/beam
! Clean residual mean=-0.001125 rms=0.002682 Jy/beam
! Combined flux in latest and established models = 0.435487 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.435487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187412Jy  sigma=0.001389
! Fit after  self-cal, rms=0.187402Jy  sigma=0.001389
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.84     FT        1.00*    HH        1.00*    
!   HN        1.03     KP        0.87     LA        0.99     MK        1.00*    
!   NL        0.89     OV        1.00*    PT        0.96     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.89     FT        1.00*    HH        1.32     
!   HN        1.03     KP        1.03     LA        0.98     MK        0.87     
!   NL        0.94     OV        0.93     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.92     FD        0.90     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.86     LA        0.99     MK        0.95     
!   NL        0.97     OV        0.97     PT        1.02     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     FT        1.00*    HH        1.00*    
!   HN        1.06     KP        0.83     LA        0.96     MK        1.00*    
!   NL        1.06     OV        1.00*    PT        1.05     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.90     FT        1.00*    HH        1.20     
!   HN        1.09     KP        0.97     LA        1.00     MK        1.10     
!   NL        1.08     OV        0.97     PT        1.07     TS        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     FD        0.89     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.85     LA        0.98     MK        0.99     
!   NL        1.11     OV        1.01     PT        1.10     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.89     FT        1.00*    HH        1.00*    
!   HN        1.05     KP        0.76     LA        0.97     MK        1.00*    
!   NL        1.07     OV        1.00*    PT        1.01     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.91     FT        1.00*    HH        1.21     
!   HN        1.03     KP        0.91     LA        1.01     MK        1.00     
!   NL        1.03     OV        0.97     PT        1.05     TS        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        0.88     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.77     LA        1.04     MK        0.99     
!   NL        1.07     OV        1.02     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.94     FT        1.00*    HH        1.00*    
!   HN        1.02     KP        0.84     LA        1.07     MK        1.00*    
!   NL        0.99     OV        1.00*    PT        1.08     TS        1.00*    
!   WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.99     FT        1.00*    HH        1.02     
!   HN        1.02     KP        1.02     LA        1.06     MK        1.06     
!   NL        1.08     OV        0.98     PT        1.12     TS        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     FD        0.97     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.84     LA        1.08     MK        1.08     
!   NL        1.11     OV        1.04     PT        1.15     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.187402Jy  sigma=0.001389
! Fit after  self-cal, rms=0.194373Jy  sigma=0.001345
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=1.157 mas, bmaj=1.968 mas, bpa=50.8 degrees
! Estimated noise=624.314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00358215 Jy
! Component: 100  -  total flux cleaned = -0.00458711 Jy
! Component: 150  -  total flux cleaned = -0.00476986 Jy
! Component: 200  -  total flux cleaned = -0.00488502 Jy
! Total flux subtracted in 200 components = -0.00488502 Jy
! Clean residual min=-0.004810 max=0.005342 Jy/beam
! Clean residual mean=-0.000244 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 0.430602 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 49 components and 0.430602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194234Jy  sigma=0.001345
! Fit after  self-cal, rms=0.194210Jy  sigma=0.001345
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194210Jy  sigma=0.001345
! Fit after  self-cal, rms=0.196893Jy  sigma=0.001338
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=1.161 mas, bmaj=1.972 mas, bpa=50.85 degrees
! Estimated noise=624.075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110789 Jy
! Component: 100  -  total flux cleaned = -0.00126763 Jy
! Component: 150  -  total flux cleaned = -0.00136857 Jy
! Component: 200  -  total flux cleaned = -0.00146166 Jy
! Total flux subtracted in 200 components = -0.00146166 Jy
! Clean residual min=-0.003797 max=0.003547 Jy/beam
! Clean residual mean=0.000044 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.429141 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 51 components and 0.429141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196826Jy  sigma=0.001338
! Fit after  self-cal, rms=0.196891Jy  sigma=0.001338
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164965 Jy
! Component: 100  -  total flux cleaned = -0.000262072 Jy
! Component: 150  -  total flux cleaned = -0.00030658 Jy
! Component: 200  -  total flux cleaned = -0.00035246 Jy
! Total flux subtracted in 200 components = -0.00035246 Jy
! Clean residual min=-0.003817 max=0.003473 Jy/beam
! Clean residual mean=0.000050 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.428788 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 55 components and 0.428788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196843Jy  sigma=0.001338
! Fit after  self-cal, rms=0.196822Jy  sigma=0.001338
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196822Jy  sigma=0.001338
! Fit after  self-cal, rms=0.197624Jy  sigma=0.001337
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=1.161 mas, bmaj=1.974 mas, bpa=50.78 degrees
! Estimated noise=624.542 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000909604 Jy
! Component: 100  -  total flux cleaned = -0.00100603 Jy
! Component: 150  -  total flux cleaned = -0.00100542 Jy
! Component: 200  -  total flux cleaned = -0.00100628 Jy
! Total flux subtracted in 200 components = -0.00100628 Jy
! Clean residual min=-0.003027 max=0.003760 Jy/beam
! Clean residual mean=0.000024 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.427782 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 58 components and 0.427782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197570Jy  sigma=0.001337
! Fit after  self-cal, rms=0.197554Jy  sigma=0.001337
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269827 Jy
! Component: 100  -  total flux cleaned = 0.00287973 Jy
! Component: 150  -  total flux cleaned = 0.00287906 Jy
! Component: 200  -  total flux cleaned = 0.00292623 Jy
! Total flux subtracted in 200 components = 0.00292623 Jy
! Clean residual min=-0.002774 max=0.002894 Jy/beam
! Clean residual mean=-0.000051 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.430708 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.430708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197490Jy  sigma=0.001336
! Fit after  self-cal, rms=0.197479Jy  sigma=0.001336
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197479Jy  sigma=0.001336
! Fit after  self-cal, rms=0.197656Jy  sigma=0.001336
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=2.78 mas, bmaj=3.752 mas, bpa=-73.27 degrees
! Estimated noise=660.991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253819 Jy
! Component: 100  -  total flux cleaned = 0.000107446 Jy
! Component: 150  -  total flux cleaned = -1.9992e-06 Jy
! Component: 200  -  total flux cleaned = -2.12144e-05 Jy
! Total flux subtracted in 200 components = -2.12144e-05 Jy
! Clean residual min=-0.002546 max=0.002598 Jy/beam
! Clean residual mean=-0.000090 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.430687 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 0.430687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197645Jy  sigma=0.001336
! Fit after  self-cal, rms=0.197644Jy  sigma=0.001336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.64293e-06 Jy
! Component: 100  -  total flux cleaned = 2.09472e-05 Jy
! Component: 150  -  total flux cleaned = 2.0841e-05 Jy
! Component: 200  -  total flux cleaned = 2.0883e-05 Jy
! Total flux subtracted in 200 components = 2.0883e-05 Jy
! Clean residual min=-0.002465 max=0.002542 Jy/beam
! Clean residual mean=-0.000091 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.430708 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.430708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197642Jy  sigma=0.001336
! Fit after  self-cal, rms=0.197642Jy  sigma=0.001336
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=1.165 mas, bmaj=1.976 mas, bpa=50.86 degrees
! Estimated noise=624.319 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.165 x 1.976 at 50.86 degrees (North through East)
! Clean map  min=-0.0024844  max=0.30762 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=0.7611 mas, bmaj=1.193 mas, bpa=47.04 degrees
! Estimated noise=1289.09 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.240565 Jy
! Component: 100  -  total flux cleaned = 0.321431 Jy
! Component: 150  -  total flux cleaned = 0.365877 Jy
! Component: 200  -  total flux cleaned = 0.392179 Jy
! Total flux subtracted in 200 components = 0.392179 Jy
! Clean residual min=-0.007325 max=0.014408 Jy/beam
! Clean residual mean=-0.000004 rms=0.002237 Jy/beam
! Combined flux in latest and established models = 0.392179 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.392179 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=1.165 mas, bmaj=1.976 mas, bpa=50.86 degrees
! Estimated noise=624.319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183312 Jy
! Component: 100  -  total flux cleaned = 0.0269129 Jy
! Component: 150  -  total flux cleaned = 0.0318102 Jy
! Component: 200  -  total flux cleaned = 0.0351108 Jy
! Total flux subtracted in 200 components = 0.0351108 Jy
! Clean residual min=-0.003027 max=0.003451 Jy/beam
! Clean residual mean=0.000033 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.42729 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.42729 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Added new window around map position (-10.4, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247351 Jy
! Component: 100  -  total flux cleaned = 0.00375376 Jy
! Component: 150  -  total flux cleaned = 0.00429234 Jy
! Component: 200  -  total flux cleaned = 0.00456356 Jy
! Total flux subtracted in 200 components = 0.00456356 Jy
! Clean residual min=-0.002782 max=0.002512 Jy/beam
! Clean residual mean=-0.000083 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.431854 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 0.431854 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! Estimated beam: bmin=0.8611 mas, bmaj=2.041 mas, bpa=47.59 degrees
! Estimated noise=737.149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334779 Jy
! Component: 100  -  total flux cleaned = 0.000335035 Jy
! Component: 150  -  total flux cleaned = 0.0003308 Jy
! Component: 200  -  total flux cleaned = 0.000331611 Jy
! Total flux subtracted in 200 components = 0.000331611 Jy
! Clean residual min=-0.003114 max=0.003217 Jy/beam
! Clean residual mean=-0.000143 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.432185 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42458e-06 Jy
! Component: 100  -  total flux cleaned = 2.81568e-06 Jy
! Component: 150  -  total flux cleaned = 2.42768e-06 Jy
! Component: 200  -  total flux cleaned = 8.53834e-07 Jy
! Total flux subtracted in 200 components = 8.53834e-07 Jy
! Clean residual min=-0.003045 max=0.003147 Jy/beam
! Clean residual mean=-0.000143 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.432186 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 61 components and 0.432186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197472Jy  sigma=0.001335
! Fit after  self-cal, rms=0.197276Jy  sigma=0.001335
wmodel J0443+3441_X_2011_08_02_pus_map.mod
! Writing 61 model components to file: J0443+3441_X_2011_08_02_pus_map.mod
wobs J0443+3441_X_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J0443+3441_X_2011_08_02_pus_uvs.fits
wwins J0443+3441_X_2011_08_02_pus_map.win
! wwins: Wrote 4 windows to J0443+3441_X_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000279665 Jy
! Component: 100  -  total flux cleaned = -0.000714296 Jy
! Component: 150  -  total flux cleaned = -0.0010743 Jy
! Component: 200  -  total flux cleaned = -0.00127156 Jy
! Component: 250  -  total flux cleaned = -0.00150791 Jy
! Component: 300  -  total flux cleaned = -0.00169069 Jy
! Component: 350  -  total flux cleaned = -0.00178033 Jy
! Component: 400  -  total flux cleaned = -0.00178072 Jy
! Component: 450  -  total flux cleaned = -0.0018235 Jy
! Component: 500  -  total flux cleaned = -0.00182343 Jy
! Component: 550  -  total flux cleaned = -0.00182298 Jy
! Component: 600  -  total flux cleaned = -0.00182242 Jy
! Component: 650  -  total flux cleaned = -0.00190168 Jy
! Component: 700  -  total flux cleaned = -0.00194012 Jy
! Component: 750  -  total flux cleaned = -0.0020174 Jy
! Component: 800  -  total flux cleaned = -0.0020554 Jy
! Component: 850  -  total flux cleaned = -0.00213089 Jy
! Component: 900  -  total flux cleaned = -0.00224182 Jy
! Component: 950  -  total flux cleaned = -0.00227804 Jy
! Component: 1000  -  total flux cleaned = -0.00227838 Jy
! Component: 1050  -  total flux cleaned = -0.00242167 Jy
! Component: 1100  -  total flux cleaned = -0.002493 Jy
! Component: 1150  -  total flux cleaned = -0.00266873 Jy
! Component: 1200  -  total flux cleaned = -0.00273864 Jy
! Component: 1250  -  total flux cleaned = -0.00294525 Jy
! Component: 1300  -  total flux cleaned = -0.00308144 Jy
! Component: 1350  -  total flux cleaned = -0.00325009 Jy
! Component: 1400  -  total flux cleaned = -0.00338369 Jy
! Component: 1450  -  total flux cleaned = -0.00351607 Jy
! Component: 1500  -  total flux cleaned = -0.00364754 Jy
! Component: 1550  -  total flux cleaned = -0.00377791 Jy
! Component: 1600  -  total flux cleaned = -0.00397131 Jy
! Component: 1650  -  total flux cleaned = -0.00409913 Jy
! Component: 1700  -  total flux cleaned = -0.00419431 Jy
! Component: 1750  -  total flux cleaned = -0.00431996 Jy
! Component: 1800  -  total flux cleaned = -0.00447567 Jy
! Component: 1850  -  total flux cleaned = -0.00456833 Jy
! Component: 1900  -  total flux cleaned = -0.00472148 Jy
! Component: 1950  -  total flux cleaned = -0.00487335 Jy
! Component: 2000  -  total flux cleaned = -0.00499377 Jy
! Total flux subtracted in 2048 components = -0.00508346 Jy
! Clean residual min=-0.001644 max=0.001588 Jy/beam
! Clean residual mean=-0.000035 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.427103 Jy
keep
! Adding 118 model components to the UV plane model.
! The established model now contains 179 components and 0.427103 Jy
![Exited script file: muppet]
wmap "J0443+3441_X_2011_08_02_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8611 x 2.041 at 47.59 degrees (North through East)
! Clean map  min=-0.0030533  max=0.29752 Jy/beam
! Writing clean map to FITS file: J0443+3441_X_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.297518 
invert
! Inverting map 
! Your choice of large map pixels excluded 5.02% of the data.
!  The x-axis pixel size should ideally be below 0.1926 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1635 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000555154 
device "J0443+3441_X_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J0443+3441_X_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.559785 0.559785 1.11957 2.23914 4.47828 8.95656 17.9131 35.8263 71.6525
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.297 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8611 x 2.041 at 47.59 degrees (North through East)
! Clean map  min=-0.0030533  max=0.29752 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0443+3441_X_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J0443+3441_X_2011_08_02_pus_map.gif/vgif'
mapplot cln