! Started logfile: J0333+6536_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:12:32 2012 obs J0333+6536_S_2011_08_02_pus_uva.fits ! Reading UV FITS file: J0333+6536_S_2011_08_02_pus_uva.fits ! AN table 1: 180 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.436752 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0333+6536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2651 lines of history. ! ! Reading 24528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0333+6536_S_2011_08_02_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 765 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 765 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 765 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 765 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951766Jy sigma=0.011611 ! Fit after self-cal, rms=0.912583Jy sigma=0.011200 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=7.079 mas, bpa=-77.65 degrees ! Estimated noise=721.756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737886 Jy ! Component: 100 - total flux cleaned = 0.0900768 Jy ! Total flux subtracted in 100 components = 0.0900768 Jy ! Clean residual min=-0.006067 max=0.007456 Jy/beam ! Clean residual mean=0.000028 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.0900768 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0900768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126182Jy sigma=0.001428 ! Fit after self-cal, rms=0.126103Jy sigma=0.001428 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=8.11 mas, bpa=-81.31 degrees ! Estimated noise=374.435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660493 Jy ! Component: 100 - total flux cleaned = 0.00872299 Jy ! Component: 150 - total flux cleaned = 0.00899528 Jy ! Component: 200 - total flux cleaned = 0.00921571 Jy ! Total flux subtracted in 200 components = 0.00921571 Jy ! Clean residual min=-0.004174 max=0.005362 Jy/beam ! Clean residual mean=-0.000008 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.0992925 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.0992925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125701Jy sigma=0.001424 ! Fit after self-cal, rms=0.125674Jy sigma=0.001424 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 FT 1.00* HH 1.00* ! HN 0.97 KP 0.98 LA 1.07 MK 0.83 ! NL 0.93 OV 0.95 PT 1.02 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.27 FT 1.00* HH 1.00* ! HN 1.04 KP 0.94 LA 0.97 MK 0.98 ! NL 0.99 OV 1.12 PT 0.93 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.25 FT 1.00* HH 1.00* ! HN 0.96 KP 0.95 LA 0.92 MK 0.95 ! NL 1.07 OV 1.08 PT 0.98 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.29 FT 1.00* HH 1.00* ! HN 0.85 KP 0.90 LA 0.72 MK 1.06 ! NL 0.97 OV 0.90 PT 0.94 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.125674Jy sigma=0.001424 ! Fit after self-cal, rms=0.119966Jy sigma=0.001411 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.253 mas, bmaj=8.039 mas, bpa=-81.66 degrees ! Estimated noise=371.116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114984 Jy ! Component: 100 - total flux cleaned = 0.00111052 Jy ! Component: 150 - total flux cleaned = 0.00119288 Jy ! Component: 200 - total flux cleaned = 0.00125528 Jy ! Total flux subtracted in 200 components = 0.00125528 Jy ! Clean residual min=-0.003372 max=0.003664 Jy/beam ! Clean residual mean=-0.000100 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.100548 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.100548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119937Jy sigma=0.001410 ! Fit after self-cal, rms=0.120034Jy sigma=0.001409 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120034Jy sigma=0.001409 ! Fit after self-cal, rms=0.119551Jy sigma=0.001406 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=8.013 mas, bpa=-82.35 degrees ! Estimated noise=372.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207397 Jy ! Component: 100 - total flux cleaned = 0.000356052 Jy ! Component: 150 - total flux cleaned = 0.000507095 Jy ! Component: 200 - total flux cleaned = 0.000575729 Jy ! Total flux subtracted in 200 components = 0.000575729 Jy ! Clean residual min=-0.003017 max=0.003860 Jy/beam ! Clean residual mean=-0.000001 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.101124 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.101124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119540Jy sigma=0.001406 ! Fit after self-cal, rms=0.119619Jy sigma=0.001406 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.74056e-05 Jy ! Component: 100 - total flux cleaned = 1.46733e-05 Jy ! Component: 150 - total flux cleaned = 3.0257e-05 Jy ! Component: 200 - total flux cleaned = 4.45354e-05 Jy ! Total flux subtracted in 200 components = 4.45354e-05 Jy ! Clean residual min=-0.003053 max=0.003808 Jy/beam ! Clean residual mean=-0.000005 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.101168 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.101168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119614Jy sigma=0.001406 ! Fit after self-cal, rms=0.119613Jy sigma=0.001406 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119613Jy sigma=0.001406 ! Fit after self-cal, rms=0.119913Jy sigma=0.001406 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.243 mas, bmaj=7.987 mas, bpa=-82.53 degrees ! Estimated noise=373.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367091 Jy ! Component: 100 - total flux cleaned = 0.000524462 Jy ! Component: 150 - total flux cleaned = 0.000643152 Jy ! Component: 200 - total flux cleaned = 0.000697396 Jy ! Total flux subtracted in 200 components = 0.000697396 Jy ! Clean residual min=-0.003000 max=0.003941 Jy/beam ! Clean residual mean=0.000005 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.101865 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.101865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119906Jy sigma=0.001406 ! Fit after self-cal, rms=0.119921Jy sigma=0.001405 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.11187e-05 Jy ! Component: 100 - total flux cleaned = -1.45802e-05 Jy ! Component: 150 - total flux cleaned = 1.10794e-05 Jy ! Component: 200 - total flux cleaned = 3.34744e-05 Jy ! Total flux subtracted in 200 components = 3.34744e-05 Jy ! Clean residual min=-0.002995 max=0.003916 Jy/beam ! Clean residual mean=0.000004 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.101899 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.101899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119917Jy sigma=0.001405 ! Fit after self-cal, rms=0.119915Jy sigma=0.001405 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119915Jy sigma=0.001405 ! Fit after self-cal, rms=0.120068Jy sigma=0.001405 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.18 mas, bmaj=12.01 mas, bpa=80.76 degrees ! Estimated noise=419.529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750037 Jy ! Component: 100 - total flux cleaned = 0.000712384 Jy ! Component: 150 - total flux cleaned = 0.000698432 Jy ! Component: 200 - total flux cleaned = 0.000698369 Jy ! Total flux subtracted in 200 components = 0.000698369 Jy ! Clean residual min=-0.003636 max=0.005561 Jy/beam ! Clean residual mean=0.000007 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.102597 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.102597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120070Jy sigma=0.001405 ! Fit after self-cal, rms=0.120064Jy sigma=0.001405 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.83918e-05 Jy ! Component: 100 - total flux cleaned = 3.29109e-05 Jy ! Component: 150 - total flux cleaned = 1.83871e-05 Jy ! Component: 200 - total flux cleaned = 1.77079e-05 Jy ! Total flux subtracted in 200 components = 1.77079e-05 Jy ! Clean residual min=-0.003645 max=0.005533 Jy/beam ! Clean residual mean=0.000007 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.102615 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.102615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120068Jy sigma=0.001405 ! Fit after self-cal, rms=0.120062Jy sigma=0.001405 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.237 mas, bmaj=7.968 mas, bpa=-82.66 degrees ! Estimated noise=374.622 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.237 x 7.968 at -82.66 degrees (North through East) ! Clean map min=-0.0029046 max=0.092636 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=6.851 mas, bpa=-78.69 degrees ! Estimated noise=719.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729978 Jy ! Component: 100 - total flux cleaned = 0.0903069 Jy ! Component: 150 - total flux cleaned = 0.0962194 Jy ! Component: 200 - total flux cleaned = 0.0976523 Jy ! Total flux subtracted in 200 components = 0.0976523 Jy ! Clean residual min=-0.004561 max=0.006352 Jy/beam ! Clean residual mean=0.000005 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.0976523 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0976523 Jy ! Inverting map and beam ! Estimated beam: bmin=4.237 mas, bmaj=7.968 mas, bpa=-82.66 degrees ! Estimated noise=374.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029242 Jy ! Component: 100 - total flux cleaned = 0.00392715 Jy ! Component: 150 - total flux cleaned = 0.00416791 Jy ! Component: 200 - total flux cleaned = 0.00436116 Jy ! Total flux subtracted in 200 components = 0.00436116 Jy ! Clean residual min=-0.002908 max=0.003992 Jy/beam ! Clean residual mean=0.000007 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.102013 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.102013 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=7.751 mas, bpa=-81.98 degrees ! Estimated noise=398.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237644 Jy ! Component: 100 - total flux cleaned = 0.000290359 Jy ! Component: 150 - total flux cleaned = 0.000338038 Jy ! Component: 200 - total flux cleaned = 0.000383082 Jy ! Total flux subtracted in 200 components = 0.000383082 Jy ! Clean residual min=-0.002735 max=0.003568 Jy/beam ! Clean residual mean=-0.000003 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.102397 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.10946e-05 Jy ! Component: 100 - total flux cleaned = 8.00531e-05 Jy ! Component: 150 - total flux cleaned = 8.01792e-05 Jy ! Component: 200 - total flux cleaned = 9.77226e-05 Jy ! Total flux subtracted in 200 components = 9.77226e-05 Jy ! Clean residual min=-0.002730 max=0.003553 Jy/beam ! Clean residual mean=-0.000003 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.102494 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.102494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120062Jy sigma=0.001405 ! Fit after self-cal, rms=0.120066Jy sigma=0.001405 wmodel J0333+6536_S_2011_08_02_pus_map.mod ! Writing 37 model components to file: J0333+6536_S_2011_08_02_pus_map.mod wobs J0333+6536_S_2011_08_02_pus_uvs.fits ! Writing UV FITS file: J0333+6536_S_2011_08_02_pus_uvs.fits wwins J0333+6536_S_2011_08_02_pus_map.win ! wwins: Wrote 1 windows to J0333+6536_S_2011_08_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156118 Jy ! Component: 100 - total flux cleaned = 0.00248482 Jy ! Component: 150 - total flux cleaned = 0.00307906 Jy ! Component: 200 - total flux cleaned = 0.00381954 Jy ! Component: 250 - total flux cleaned = 0.00456652 Jy ! Component: 300 - total flux cleaned = 0.00515331 Jy ! Component: 350 - total flux cleaned = 0.00567596 Jy ! Component: 400 - total flux cleaned = 0.00610135 Jy ! Component: 450 - total flux cleaned = 0.00643572 Jy ! Component: 500 - total flux cleaned = 0.00675909 Jy ! Component: 550 - total flux cleaned = 0.00717747 Jy ! Component: 600 - total flux cleaned = 0.00744826 Jy ! Component: 650 - total flux cleaned = 0.00777925 Jy ! Component: 700 - total flux cleaned = 0.00810176 Jy ! Component: 750 - total flux cleaned = 0.008322 Jy ! Component: 800 - total flux cleaned = 0.00859862 Jy ! Component: 850 - total flux cleaned = 0.00886808 Jy ! Component: 900 - total flux cleaned = 0.00904354 Jy ! Component: 950 - total flux cleaned = 0.00927273 Jy ! Component: 1000 - total flux cleaned = 0.00944007 Jy ! Component: 1050 - total flux cleaned = 0.00960461 Jy ! Component: 1100 - total flux cleaned = 0.00973905 Jy ! Component: 1150 - total flux cleaned = 0.0098183 Jy ! Component: 1200 - total flux cleaned = 0.0100001 Jy ! Component: 1250 - total flux cleaned = 0.0101525 Jy ! Component: 1300 - total flux cleaned = 0.0103271 Jy ! Component: 1350 - total flux cleaned = 0.010474 Jy ! Component: 1400 - total flux cleaned = 0.0106428 Jy ! Component: 1450 - total flux cleaned = 0.0107853 Jy ! Component: 1500 - total flux cleaned = 0.0109487 Jy ! Component: 1550 - total flux cleaned = 0.0110637 Jy ! Component: 1600 - total flux cleaned = 0.0112228 Jy ! Component: 1650 - total flux cleaned = 0.0114242 Jy ! Component: 1700 - total flux cleaned = 0.0115564 Jy ! Component: 1750 - total flux cleaned = 0.0117735 Jy ! Component: 1800 - total flux cleaned = 0.011902 Jy ! Component: 1850 - total flux cleaned = 0.0120711 Jy ! Component: 1900 - total flux cleaned = 0.0122174 Jy ! Component: 1950 - total flux cleaned = 0.0123205 Jy ! Component: 2000 - total flux cleaned = 0.0124633 Jy ! Total flux subtracted in 2048 components = 0.0125639 Jy ! Clean residual min=-0.001003 max=0.001243 Jy/beam ! Clean residual mean=-0.000017 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.115058 Jy keep ! Adding 173 model components to the UV plane model. ! The established model now contains 210 components and 0.115058 Jy ![Exited script file: muppet] wmap "J0333+6536_S_2011_08_02_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.91 x 7.751 at -81.98 degrees (North through East) ! Clean map min=-0.0021725 max=0.092729 Jy/beam ! Writing clean map to FITS file: J0333+6536_S_2011_08_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0927285 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000461291 device "J0333+6536_S_2011_08_02_pus\_map.eps/VPS" ! Attempting to open device: 'J0333+6536_S_2011_08_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.49239 1.49239 2.98478 5.96957 11.9391 23.8783 47.7565 95.5131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.91 x 7.751 at -81.98 degrees (North through East) ! Clean map min=-0.0021725 max=0.092729 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0333+6536_S_2011_08_02_pus\_map.gif/vgif" ! Attempting to open device: 'J0333+6536_S_2011_08_02_pus_map.gif/vgif' mapplot cln