! Started logfile: J0106-4034_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:49:41 2012
obs J0106-4034_X_2011_08_02_pus_uva.fits
! Reading UV FITS file: J0106-4034_X_2011_08_02_pus_uva.fits
! AN table 1: 33 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.131702 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0106-4034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3146 lines of history.
! 
! Reading 1356 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0106-4034_X_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.477955Jy  sigma=0.003702
! Fit after  self-cal, rms=0.422911Jy  sigma=0.003272
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9398 mas, bmaj=6.381 mas, bpa=-0.5467 degrees
! Estimated noise=3959.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.93466 Jy
! Component: 100  -  total flux cleaned = 1.17289 Jy
! Total flux subtracted in 100 components = 1.17289 Jy
! Clean residual min=-0.086092 max=0.152912 Jy/beam
! Clean residual mean=-0.001128 rms=0.035175 Jy/beam
! Combined flux in latest and established models = 1.17289 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.17289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.341858Jy  sigma=0.002559
! Fit after  self-cal, rms=0.341920Jy  sigma=0.002559
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.381 mas, bmaj=6.847 mas, bpa=-1.091 degrees
! Estimated noise=2421.51 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142306 Jy
! Component: 100  -  total flux cleaned = 0.20654 Jy
! Component: 150  -  total flux cleaned = 0.232085 Jy
! Component: 200  -  total flux cleaned = 0.237175 Jy
! Total flux subtracted in 200 components = 0.237175 Jy
! Clean residual min=-0.102646 max=0.093412 Jy/beam
! Clean residual mean=-0.005220 rms=0.028455 Jy/beam
! Combined flux in latest and established models = 1.41007 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 40 components and 1.41007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.276384Jy  sigma=0.002120
! Fit after  self-cal, rms=0.276510Jy  sigma=0.002119
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.90     LA        1.04     MK        0.92     
!   NL        1.16     OV        0.95     PT        1.09     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.91     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.87     LA        1.07     MK        0.98     
!   NL        1.32     OV        0.96     PT        1.20     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.89     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.78     LA        1.09     MK        0.96     
!   NL        1.21     OV        0.97     PT        1.08     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.96     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.85     LA        1.14     MK        0.98     
!   NL        1.28     OV        0.99     PT        1.20     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.276510Jy  sigma=0.002119
! Fit after  self-cal, rms=0.191142Jy  sigma=0.001344
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.358 mas, bmaj=6.936 mas, bpa=-0.471 degrees
! Estimated noise=2413.91 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00240821 Jy
! Component: 100  -  total flux cleaned = -0.00303629 Jy
! Component: 150  -  total flux cleaned = -0.00200313 Jy
! Component: 200  -  total flux cleaned = -0.00156146 Jy
! Total flux subtracted in 200 components = -0.00156146 Jy
! Clean residual min=-0.032326 max=0.023075 Jy/beam
! Clean residual mean=-0.000461 rms=0.008003 Jy/beam
! Combined flux in latest and established models = 1.4085 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 1.4085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189162Jy  sigma=0.001306
! Fit after  self-cal, rms=0.189650Jy  sigma=0.001304
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189650Jy  sigma=0.001304
! Fit after  self-cal, rms=0.185545Jy  sigma=0.001258
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.355 mas, bmaj=6.935 mas, bpa=-0.4625 degrees
! Estimated noise=2403.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00337944 Jy
! Component: 100  -  total flux cleaned = -0.00283584 Jy
! Component: 150  -  total flux cleaned = -0.00233768 Jy
! Component: 200  -  total flux cleaned = -0.0018786 Jy
! Total flux subtracted in 200 components = -0.0018786 Jy
! Clean residual min=-0.017361 max=0.020079 Jy/beam
! Clean residual mean=0.000094 rms=0.005602 Jy/beam
! Combined flux in latest and established models = 1.40663 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 1.40663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185062Jy  sigma=0.001250
! Fit after  self-cal, rms=0.185137Jy  sigma=0.001250
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000613425 Jy
! Component: 100  -  total flux cleaned = 0.00118191 Jy
! Component: 150  -  total flux cleaned = 0.00153979 Jy
! Component: 200  -  total flux cleaned = 0.00170753 Jy
! Total flux subtracted in 200 components = 0.00170753 Jy
! Clean residual min=-0.016764 max=0.019676 Jy/beam
! Clean residual mean=0.000085 rms=0.005521 Jy/beam
! Combined flux in latest and established models = 1.40833 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 65 components and 1.40833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184856Jy  sigma=0.001246
! Fit after  self-cal, rms=0.184862Jy  sigma=0.001246
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184862Jy  sigma=0.001246
! Fit after  self-cal, rms=0.184334Jy  sigma=0.001226
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.355 mas, bmaj=6.974 mas, bpa=-0.3697 degrees
! Estimated noise=2405.7 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00456029 Jy
! Component: 100  -  total flux cleaned = -0.00430416 Jy
! Component: 150  -  total flux cleaned = -0.0040538 Jy
! Component: 200  -  total flux cleaned = -0.00360371 Jy
! Total flux subtracted in 200 components = -0.00360371 Jy
! Clean residual min=-0.015172 max=0.017600 Jy/beam
! Clean residual mean=-0.000080 rms=0.004767 Jy/beam
! Combined flux in latest and established models = 1.40473 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 74 components and 1.40473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183529Jy  sigma=0.001221
! Fit after  self-cal, rms=0.183573Jy  sigma=0.001221
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000412741 Jy
! Component: 100  -  total flux cleaned = 0.000824842 Jy
! Component: 150  -  total flux cleaned = 0.00101924 Jy
! Component: 200  -  total flux cleaned = 0.00141271 Jy
! Total flux subtracted in 200 components = 0.00141271 Jy
! Clean residual min=-0.014950 max=0.016783 Jy/beam
! Clean residual mean=-0.000090 rms=0.004654 Jy/beam
! Combined flux in latest and established models = 1.40614 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 76 components and 1.40614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183050Jy  sigma=0.001218
! Fit after  self-cal, rms=0.183062Jy  sigma=0.001218
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183062Jy  sigma=0.001218
! Fit after  self-cal, rms=0.184069Jy  sigma=0.001217
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.122 mas, bmaj=7.532 mas, bpa=-3.499 degrees
! Estimated noise=2639.64 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169559 Jy
! Component: 100  -  total flux cleaned = 0.00186497 Jy
! Component: 150  -  total flux cleaned = 0.00218102 Jy
! Component: 200  -  total flux cleaned = 0.00232252 Jy
! Total flux subtracted in 200 components = 0.00232252 Jy
! Clean residual min=-0.015091 max=0.013806 Jy/beam
! Clean residual mean=-0.000190 rms=0.004320 Jy/beam
! Combined flux in latest and established models = 1.40846 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 81 components and 1.40846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183648Jy  sigma=0.001218
! Fit after  self-cal, rms=0.183684Jy  sigma=0.001218
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268594 Jy
! Component: 100  -  total flux cleaned = 0.000386303 Jy
! Component: 150  -  total flux cleaned = 0.000615836 Jy
! Component: 200  -  total flux cleaned = 0.000726801 Jy
! Total flux subtracted in 200 components = 0.000726801 Jy
! Clean residual min=-0.015245 max=0.013249 Jy/beam
! Clean residual mean=-0.000200 rms=0.004324 Jy/beam
! Combined flux in latest and established models = 1.40919 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 84 components and 1.40919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183507Jy  sigma=0.001220
! Fit after  self-cal, rms=0.183517Jy  sigma=0.001220
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.354 mas, bmaj=6.99 mas, bpa=-0.3326 degrees
! Estimated noise=2403.97 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.354 x 6.99 at -0.3326 degrees (North through East)
! Clean map  min=-0.01434  max=1.2224 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183517Jy  sigma=0.001220
! Fit after  self-cal, rms=0.167395Jy  sigma=0.001047
! Inverting map and beam 
! Estimated beam: bmin=1.347 mas, bmaj=6.995 mas, bpa=-0.3377 degrees
! Estimated noise=2393.38 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00533235 Jy
! Component: 100  -  total flux cleaned = -0.00552611 Jy
! Component: 150  -  total flux cleaned = -0.0057048 Jy
! Component: 200  -  total flux cleaned = -0.00569793 Jy
! Total flux subtracted in 200 components = -0.00569793 Jy
! Clean residual min=-0.013838 max=0.014800 Jy/beam
! Clean residual mean=-0.000004 rms=0.004100 Jy/beam
! Combined flux in latest and established models = 1.40349 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 85 components and 1.40349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166966Jy  sigma=0.001042
! Fit after  self-cal, rms=0.166969Jy  sigma=0.001042
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144055 Jy
! Component: 100  -  total flux cleaned = 0.000305903 Jy
! Component: 150  -  total flux cleaned = 0.000601059 Jy
! Component: 200  -  total flux cleaned = 0.0008897 Jy
! Total flux subtracted in 200 components = 0.0008897 Jy
! Clean residual min=-0.013639 max=0.014099 Jy/beam
! Clean residual mean=-0.000009 rms=0.004020 Jy/beam
! Combined flux in latest and established models = 1.40438 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 87 components and 1.40438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166685Jy  sigma=0.001040
! Fit after  self-cal, rms=0.166699Jy  sigma=0.001040
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166699Jy  sigma=0.001040
! Fit after  self-cal, rms=0.167490Jy  sigma=0.001039
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9243 mas, bmaj=6.555 mas, bpa=-0.09148 degrees
! Estimated noise=3836.77 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.904134 Jy
! Component: 100  -  total flux cleaned = 1.10995 Jy
! Component: 150  -  total flux cleaned = 1.20022 Jy
! Component: 200  -  total flux cleaned = 1.25577 Jy
! Total flux subtracted in 200 components = 1.25577 Jy
! Clean residual min=-0.022414 max=0.040797 Jy/beam
! Clean residual mean=0.000048 rms=0.008954 Jy/beam
! Combined flux in latest and established models = 1.25577 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 1.25577 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.348 mas, bmaj=7.006 mas, bpa=-0.3066 degrees
! Estimated noise=2392.25 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0618995 Jy
! Component: 100  -  total flux cleaned = 0.095151 Jy
! Component: 150  -  total flux cleaned = 0.114855 Jy
! Component: 200  -  total flux cleaned = 0.127152 Jy
! Total flux subtracted in 200 components = 0.127152 Jy
! Clean residual min=-0.013088 max=0.015084 Jy/beam
! Clean residual mean=0.000087 rms=0.004519 Jy/beam
! Combined flux in latest and established models = 1.38292 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 83 components and 1.38292 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.451 mas, bmaj=6.48 mas, bpa=-2.477 degrees
! Estimated noise=2952.8 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114591 Jy
! Component: 100  -  total flux cleaned = 0.0136913 Jy
! Component: 150  -  total flux cleaned = 0.0153097 Jy
! Component: 200  -  total flux cleaned = 0.0165014 Jy
! Total flux subtracted in 200 components = 0.0165014 Jy
! Clean residual min=-0.015434 max=0.015054 Jy/beam
! Clean residual mean=-0.000000 rms=0.004545 Jy/beam
! Combined flux in latest and established models = 1.39942 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000594167 Jy
! Component: 100  -  total flux cleaned = 0.00113399 Jy
! Component: 150  -  total flux cleaned = 0.00151195 Jy
! Component: 200  -  total flux cleaned = 0.0017536 Jy
! Total flux subtracted in 200 components = 0.0017536 Jy
! Clean residual min=-0.015111 max=0.014219 Jy/beam
! Clean residual mean=-0.000016 rms=0.004423 Jy/beam
! Combined flux in latest and established models = 1.40118 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 90 components and 1.40118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166639Jy  sigma=0.001038
! Fit after  self-cal, rms=0.166692Jy  sigma=0.001037
wmodel J0106-4034_X_2011_08_02_pus_map.mod
! Writing 90 model components to file: J0106-4034_X_2011_08_02_pus_map.mod
wobs J0106-4034_X_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J0106-4034_X_2011_08_02_pus_uvs.fits
wwins J0106-4034_X_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J0106-4034_X_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000623887 Jy
! Component: 100  -  total flux cleaned = -0.00174905 Jy
! Component: 150  -  total flux cleaned = -0.00300782 Jy
! Component: 200  -  total flux cleaned = -0.00395713 Jy
! Component: 250  -  total flux cleaned = -0.00465563 Jy
! Component: 300  -  total flux cleaned = -0.0056472 Jy
! Component: 350  -  total flux cleaned = -0.0067376 Jy
! Component: 400  -  total flux cleaned = -0.00777385 Jy
! Component: 450  -  total flux cleaned = -0.00847596 Jy
! Component: 500  -  total flux cleaned = -0.00927776 Jy
! Component: 550  -  total flux cleaned = -0.0103028 Jy
! Component: 600  -  total flux cleaned = -0.0110402 Jy
! Component: 650  -  total flux cleaned = -0.0121003 Jy
! Component: 700  -  total flux cleaned = -0.0128884 Jy
! Component: 750  -  total flux cleaned = -0.0134295 Jy
! Component: 800  -  total flux cleaned = -0.0140534 Jy
! Component: 850  -  total flux cleaned = -0.0143522 Jy
! Component: 900  -  total flux cleaned = -0.0148325 Jy
! Component: 950  -  total flux cleaned = -0.014739 Jy
! Component: 1000  -  total flux cleaned = -0.0150113 Jy
! Component: 1050  -  total flux cleaned = -0.0150112 Jy
! Component: 1100  -  total flux cleaned = -0.014754 Jy
! Component: 1150  -  total flux cleaned = -0.0147552 Jy
! Component: 1200  -  total flux cleaned = -0.0146734 Jy
! Component: 1250  -  total flux cleaned = -0.0144337 Jy
! Component: 1300  -  total flux cleaned = -0.0144344 Jy
! Component: 1350  -  total flux cleaned = -0.0140526 Jy
! Component: 1400  -  total flux cleaned = -0.0139776 Jy
! Component: 1450  -  total flux cleaned = -0.0137568 Jy
! Component: 1500  -  total flux cleaned = -0.0133991 Jy
! Component: 1550  -  total flux cleaned = -0.0132601 Jy
! Component: 1600  -  total flux cleaned = -0.0132598 Jy
! Component: 1650  -  total flux cleaned = -0.0129889 Jy
! Component: 1700  -  total flux cleaned = -0.0126588 Jy
! Component: 1750  -  total flux cleaned = -0.0124657 Jy
! Component: 1800  -  total flux cleaned = -0.0122754 Jy
! Component: 1850  -  total flux cleaned = -0.0120886 Jy
! Component: 1900  -  total flux cleaned = -0.012028 Jy
! Component: 1950  -  total flux cleaned = -0.0119672 Jy
! Component: 2000  -  total flux cleaned = -0.0117894 Jy
! Total flux subtracted in 2048 components = -0.0117311 Jy
! Clean residual min=-0.002893 max=0.003146 Jy/beam
! Clean residual mean=0.000112 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 1.38945 Jy
keep
! Adding 115 model components to the UV plane model.
! The established model now contains 205 components and 1.38945 Jy
![Exited script file: muppet]
wmap "J0106-4034_X_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.451 x 6.48 at -2.477 degrees (North through East)
! Clean map  min=-0.0094653  max=1.1934 Jy/beam
! Writing clean map to FITS file: J0106-4034_X_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.19343 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00119727 
device "J0106-4034_X_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J0106-4034_X_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.300964 0.300964 0.601928 1.20386 2.40771 4.81542 9.63084 19.2617 38.5234 77.0468
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0035 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.193 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.451 x 6.48 at -2.477 degrees (North through East)
! Clean map  min=-0.0094653  max=1.1934 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0106-4034_X_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J0106-4034_X_2011_08_02_pus_map.gif/vgif'
mapplot cln