! Started logfile: J0106-4034_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:11:55 2012
obs J0106-4034_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J0106-4034_S_2011_08_02_pus_uva.fits
! AN table 1: 33 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.131702 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0106-4034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 1356 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0106-4034_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.449481Jy  sigma=0.003881
! Fit after  self-cal, rms=0.421088Jy  sigma=0.003619
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.23 mas, bmaj=22.22 mas, bpa=0.4681 degrees
! Estimated noise=3018.3 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.523041 Jy
! Component: 100  -  total flux cleaned = 0.64851 Jy
! Total flux subtracted in 100 components = 0.64851 Jy
! Clean residual min=-0.052808 max=0.081836 Jy/beam
! Clean residual mean=0.001355 rms=0.019799 Jy/beam
! Combined flux in latest and established models = 0.64851 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.64851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215221Jy  sigma=0.001715
! Fit after  self-cal, rms=0.215266Jy  sigma=0.001714
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.696 mas, bmaj=25.43 mas, bpa=-1.118 degrees
! Estimated noise=2168.18 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0302092 Jy
! Component: 100  -  total flux cleaned = 0.0342419 Jy
! Component: 150  -  total flux cleaned = 0.036253 Jy
! Component: 200  -  total flux cleaned = 0.0379114 Jy
! Total flux subtracted in 200 components = 0.0379114 Jy
! Clean residual min=-0.033061 max=0.043888 Jy/beam
! Clean residual mean=0.000008 rms=0.011635 Jy/beam
! Combined flux in latest and established models = 0.686422 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 50 components and 0.686422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195626Jy  sigma=0.001596
! Fit after  self-cal, rms=0.195713Jy  sigma=0.001596
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.07     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.94     LA        1.04     MK        0.87     
!   NL        1.17     OV        0.85     PT        1.05     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.18     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.01     LA        0.93     MK        0.99     
!   NL        1.29     OV        0.91     PT        1.03     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.18     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.96     LA        0.93     MK        0.94     
!   NL        1.20     OV        0.91     PT        0.99     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.16     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.91     LA        0.76     MK        1.01     
!   NL        1.04     OV        0.79     PT        0.92     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.195713Jy  sigma=0.001596
! Fit after  self-cal, rms=0.160812Jy  sigma=0.001259
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.609 mas, bmaj=25.97 mas, bpa=-0.6512 degrees
! Estimated noise=2156.15 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189166 Jy
! Component: 100  -  total flux cleaned = 0.00167804 Jy
! Component: 150  -  total flux cleaned = 0.00130251 Jy
! Component: 200  -  total flux cleaned = 0.000851093 Jy
! Total flux subtracted in 200 components = 0.000851093 Jy
! Clean residual min=-0.011341 max=0.011158 Jy/beam
! Clean residual mean=-0.001079 rms=0.003406 Jy/beam
! Combined flux in latest and established models = 0.687273 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 55 components and 0.687273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160430Jy  sigma=0.001253
! Fit after  self-cal, rms=0.160389Jy  sigma=0.001252
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160389Jy  sigma=0.001252
! Fit after  self-cal, rms=0.159985Jy  sigma=0.001234
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.59 mas, bmaj=25.95 mas, bpa=-0.603 degrees
! Estimated noise=2155.86 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787068 Jy
! Component: 100  -  total flux cleaned = 0.000994963 Jy
! Component: 150  -  total flux cleaned = 0.000996429 Jy
! Component: 200  -  total flux cleaned = 0.000996812 Jy
! Total flux subtracted in 200 components = 0.000996812 Jy
! Clean residual min=-0.008371 max=0.006322 Jy/beam
! Clean residual mean=-0.000312 rms=0.002116 Jy/beam
! Combined flux in latest and established models = 0.68827 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.68827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159954Jy  sigma=0.001234
! Fit after  self-cal, rms=0.159984Jy  sigma=0.001234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.46e-05 Jy
! Component: 100  -  total flux cleaned = -8.37407e-05 Jy
! Component: 150  -  total flux cleaned = -0.000121579 Jy
! Component: 200  -  total flux cleaned = -0.000121048 Jy
! Total flux subtracted in 200 components = -0.000121048 Jy
! Clean residual min=-0.008258 max=0.006306 Jy/beam
! Clean residual mean=-0.000309 rms=0.002100 Jy/beam
! Combined flux in latest and established models = 0.688149 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.688149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159965Jy  sigma=0.001234
! Fit after  self-cal, rms=0.159965Jy  sigma=0.001234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159965Jy  sigma=0.001234
! Fit after  self-cal, rms=0.161675Jy  sigma=0.001225
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.582 mas, bmaj=26.04 mas, bpa=-0.5498 degrees
! Estimated noise=2158.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004716 Jy
! Component: 100  -  total flux cleaned = 0.000472699 Jy
! Component: 150  -  total flux cleaned = 0.000533313 Jy
! Component: 200  -  total flux cleaned = 0.000586583 Jy
! Total flux subtracted in 200 components = 0.000586583 Jy
! Clean residual min=-0.007945 max=0.006668 Jy/beam
! Clean residual mean=-0.000342 rms=0.002086 Jy/beam
! Combined flux in latest and established models = 0.688735 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 84 components and 0.688735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161606Jy  sigma=0.001224
! Fit after  self-cal, rms=0.161620Jy  sigma=0.001224
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.67592e-06 Jy
! Component: 100  -  total flux cleaned = 6.38478e-07 Jy
! Component: 150  -  total flux cleaned = -3.11753e-07 Jy
! Component: 200  -  total flux cleaned = 9.61285e-07 Jy
! Total flux subtracted in 200 components = 9.61285e-07 Jy
! Clean residual min=-0.007786 max=0.006667 Jy/beam
! Clean residual mean=-0.000343 rms=0.002063 Jy/beam
! Combined flux in latest and established models = 0.688736 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.688736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161576Jy  sigma=0.001224
! Fit after  self-cal, rms=0.161570Jy  sigma=0.001224
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161570Jy  sigma=0.001224
! Fit after  self-cal, rms=0.161866Jy  sigma=0.001224
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.55 mas, bmaj=28.12 mas, bpa=-3.904 degrees
! Estimated noise=2260.16 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000397951 Jy
! Component: 100  -  total flux cleaned = -0.00052764 Jy
! Component: 150  -  total flux cleaned = -0.000600698 Jy
! Component: 200  -  total flux cleaned = -0.000632603 Jy
! Total flux subtracted in 200 components = -0.000632603 Jy
! Clean residual min=-0.005805 max=0.005759 Jy/beam
! Clean residual mean=-0.000393 rms=0.001997 Jy/beam
! Combined flux in latest and established models = 0.688103 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 97 components and 0.688103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161833Jy  sigma=0.001224
! Fit after  self-cal, rms=0.161835Jy  sigma=0.001224
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111113 Jy
! Component: 100  -  total flux cleaned = -0.000112933 Jy
! Component: 150  -  total flux cleaned = -3.20444e-05 Jy
! Component: 200  -  total flux cleaned = -3.23565e-05 Jy
! Total flux subtracted in 200 components = -3.23565e-05 Jy
! Clean residual min=-0.005720 max=0.005743 Jy/beam
! Clean residual mean=-0.000394 rms=0.001990 Jy/beam
! Combined flux in latest and established models = 0.688071 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.688071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161814Jy  sigma=0.001224
! Fit after  self-cal, rms=0.161811Jy  sigma=0.001224
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.574 mas, bmaj=26.06 mas, bpa=-0.5379 degrees
! Estimated noise=2158.26 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.574 x 26.06 at -0.5379 degrees (North through East)
! Clean map  min=-0.0074026  max=0.65258 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161811Jy  sigma=0.001224
! Fit after  self-cal, rms=0.151541Jy  sigma=0.001054
! Inverting map and beam 
! Estimated beam: bmin=5.572 mas, bmaj=26.08 mas, bpa=-0.5256 degrees
! Estimated noise=2160.25 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000257306 Jy
! Component: 100  -  total flux cleaned = -0.000255403 Jy
! Component: 150  -  total flux cleaned = -0.000255117 Jy
! Component: 200  -  total flux cleaned = -0.00028629 Jy
! Total flux subtracted in 200 components = -0.00028629 Jy
! Clean residual min=-0.006754 max=0.007122 Jy/beam
! Clean residual mean=-0.000327 rms=0.001979 Jy/beam
! Combined flux in latest and established models = 0.687785 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 111 components and 0.687785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151504Jy  sigma=0.001054
! Fit after  self-cal, rms=0.151505Jy  sigma=0.001054
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84637e-06 Jy
! Component: 100  -  total flux cleaned = -2.95593e-05 Jy
! Component: 150  -  total flux cleaned = -2.92487e-05 Jy
! Component: 200  -  total flux cleaned = -5.60338e-05 Jy
! Total flux subtracted in 200 components = -5.60338e-05 Jy
! Clean residual min=-0.006673 max=0.007117 Jy/beam
! Clean residual mean=-0.000325 rms=0.001972 Jy/beam
! Combined flux in latest and established models = 0.687729 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 118 components and 0.687729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151482Jy  sigma=0.001053
! Fit after  self-cal, rms=0.151482Jy  sigma=0.001053
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151482Jy  sigma=0.001053
! Fit after  self-cal, rms=0.151869Jy  sigma=0.001053
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.189 mas, bmaj=22.74 mas, bpa=0.4716 degrees
! Estimated noise=2882.89 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.499233 Jy
! Component: 100  -  total flux cleaned = 0.612578 Jy
! Component: 150  -  total flux cleaned = 0.658779 Jy
! Component: 200  -  total flux cleaned = 0.676314 Jy
! Total flux subtracted in 200 components = 0.676314 Jy
! Clean residual min=-0.015159 max=0.020498 Jy/beam
! Clean residual mean=0.000180 rms=0.004590 Jy/beam
! Combined flux in latest and established models = 0.676314 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.676314 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.567 mas, bmaj=26.1 mas, bpa=-0.5112 degrees
! Estimated noise=2160.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579284 Jy
! Component: 100  -  total flux cleaned = 0.00618711 Jy
! Component: 150  -  total flux cleaned = 0.00682927 Jy
! Component: 200  -  total flux cleaned = 0.00710953 Jy
! Total flux subtracted in 200 components = 0.00710953 Jy
! Clean residual min=-0.007425 max=0.008500 Jy/beam
! Clean residual mean=-0.000110 rms=0.002583 Jy/beam
! Combined flux in latest and established models = 0.683424 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 42 components and 0.683424 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.432 mas, bmaj=24.26 mas, bpa=-2.477 degrees
! Estimated noise=2658.66 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504173 Jy
! Component: 100  -  total flux cleaned = 0.000504883 Jy
! Component: 150  -  total flux cleaned = 0.000499941 Jy
! Component: 200  -  total flux cleaned = 0.000624587 Jy
! Total flux subtracted in 200 components = 0.000624587 Jy
! Clean residual min=-0.010760 max=0.009073 Jy/beam
! Clean residual mean=-0.000165 rms=0.003277 Jy/beam
! Combined flux in latest and established models = 0.684048 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233651 Jy
! Component: 100  -  total flux cleaned = 0.00054562 Jy
! Component: 150  -  total flux cleaned = 0.000734498 Jy
! Component: 200  -  total flux cleaned = 0.000905597 Jy
! Total flux subtracted in 200 components = 0.000905597 Jy
! Clean residual min=-0.010486 max=0.009088 Jy/beam
! Clean residual mean=-0.000213 rms=0.003174 Jy/beam
! Combined flux in latest and established models = 0.684954 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 76 components and 0.684954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151919Jy  sigma=0.001056
! Fit after  self-cal, rms=0.151908Jy  sigma=0.001056
wmodel J0106-4034_S_2011_08_02_pus_map.mod
! Writing 76 model components to file: J0106-4034_S_2011_08_02_pus_map.mod
wobs J0106-4034_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J0106-4034_S_2011_08_02_pus_uvs.fits
wwins J0106-4034_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J0106-4034_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00285121 Jy
! Component: 100  -  total flux cleaned = -0.00451241 Jy
! Component: 150  -  total flux cleaned = -0.00507273 Jy
! Component: 200  -  total flux cleaned = -0.00533813 Jy
! Component: 250  -  total flux cleaned = -0.00533222 Jy
! Component: 300  -  total flux cleaned = -0.00435139 Jy
! Component: 350  -  total flux cleaned = -0.00376355 Jy
! Component: 400  -  total flux cleaned = -0.00330747 Jy
! Component: 450  -  total flux cleaned = -0.00275413 Jy
! Component: 500  -  total flux cleaned = -0.00200935 Jy
! Component: 550  -  total flux cleaned = -0.00159873 Jy
! Component: 600  -  total flux cleaned = -0.00100103 Jy
! Component: 650  -  total flux cleaned = -0.00051913 Jy
! Component: 700  -  total flux cleaned = -4.91995e-05 Jy
! Component: 750  -  total flux cleaned = 0.000588056 Jy
! Component: 800  -  total flux cleaned = 0.000765872 Jy
! Component: 850  -  total flux cleaned = 0.001113 Jy
! Component: 900  -  total flux cleaned = 0.00145127 Jy
! Component: 950  -  total flux cleaned = 0.00178107 Jy
! Component: 1000  -  total flux cleaned = 0.00202395 Jy
! Component: 1050  -  total flux cleaned = 0.00234029 Jy
! Component: 1100  -  total flux cleaned = 0.00264744 Jy
! Component: 1150  -  total flux cleaned = 0.00302141 Jy
! Component: 1200  -  total flux cleaned = 0.00316727 Jy
! Component: 1250  -  total flux cleaned = 0.00345313 Jy
! Component: 1300  -  total flux cleaned = 0.00359192 Jy
! Component: 1350  -  total flux cleaned = 0.00359157 Jy
! Component: 1400  -  total flux cleaned = 0.00379432 Jy
! Component: 1450  -  total flux cleaned = 0.00379374 Jy
! Component: 1500  -  total flux cleaned = 0.00392412 Jy
! Component: 1550  -  total flux cleaned = 0.00398851 Jy
! Component: 1600  -  total flux cleaned = 0.00398914 Jy
! Component: 1650  -  total flux cleaned = 0.00417439 Jy
! Component: 1700  -  total flux cleaned = 0.00417382 Jy
! Component: 1750  -  total flux cleaned = 0.00417431 Jy
! Component: 1800  -  total flux cleaned = 0.00423391 Jy
! Component: 1850  -  total flux cleaned = 0.00434995 Jy
! Component: 1900  -  total flux cleaned = 0.00451943 Jy
! Component: 1950  -  total flux cleaned = 0.00457438 Jy
! Component: 2000  -  total flux cleaned = 0.00462898 Jy
! Total flux subtracted in 2048 components = 0.00462925 Jy
! Clean residual min=-0.002850 max=0.002934 Jy/beam
! Clean residual mean=-0.000149 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.689583 Jy
keep
! Adding 106 model components to the UV plane model.
! The established model now contains 182 components and 0.689583 Jy
![Exited script file: muppet]
wmap "J0106-4034_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.432 x 24.26 at -2.477 degrees (North through East)
! Clean map  min=-0.0089092  max=0.63858 Jy/beam
! Writing clean map to FITS file: J0106-4034_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.63858 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00107428 
device "J0106-4034_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J0106-4034_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.50469 0.50469 1.00938 2.01876 4.03752 8.07504 16.1501 32.3001 64.6003
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0032 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.638 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.432 x 24.26 at -2.477 degrees (North through East)
! Clean map  min=-0.0089092  max=0.63858 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0106-4034_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J0106-4034_S_2011_08_02_pus_map.gif/vgif'
mapplot cln