! Started logfile: J0052-2825_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:11:49 2012
obs J0052-2825_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J0052-2825_S_2011_08_02_pus_uva.fits
! AN table 1: 180 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.39886 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0052-2825
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 22400 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0052-2825_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 833 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 833 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 833 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 833 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.817758Jy  sigma=0.008149
! Fit after  self-cal, rms=0.774650Jy  sigma=0.007781
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.721 mas, bmaj=13.08 mas, bpa=-20.8 degrees
! Estimated noise=1056.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193422 Jy
! Component: 100  -  total flux cleaned = 0.24183 Jy
! Total flux subtracted in 100 components = 0.24183 Jy
! Clean residual min=-0.011517 max=0.019764 Jy/beam
! Clean residual mean=0.000067 rms=0.003912 Jy/beam
! Combined flux in latest and established models = 0.24183 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.24183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173612Jy  sigma=0.001432
! Fit after  self-cal, rms=0.173716Jy  sigma=0.001432
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.626 mas, bmaj=14.94 mas, bpa=-19.5 degrees
! Estimated noise=482.032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016768 Jy
! Component: 100  -  total flux cleaned = 0.0215919 Jy
! Component: 150  -  total flux cleaned = 0.0222668 Jy
! Component: 200  -  total flux cleaned = 0.0224438 Jy
! Total flux subtracted in 200 components = 0.0224438 Jy
! Clean residual min=-0.007008 max=0.009283 Jy/beam
! Clean residual mean=0.000209 rms=0.002469 Jy/beam
! Combined flux in latest and established models = 0.264274 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.264274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171829Jy  sigma=0.001417
! Fit after  self-cal, rms=0.171910Jy  sigma=0.001417
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.09     FT        1.00*    HH        1.00*    
!   HN        1.06     KP        0.98     LA        1.03     MK        0.86     
!   NL        0.90     OV        0.94     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.21     FT        1.00*    HH        1.00*    
!   HN        1.19     KP        1.04     LA        0.96     MK        0.99     
!   NL        1.01     OV        1.00     PT        1.01     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.19     FT        1.00*    HH        1.00*    
!   HN        1.10     KP        1.01     LA        0.95     MK        0.96     
!   NL        1.03     OV        1.00     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.20     FT        1.00*    HH        1.00*    
!   HN        1.02     KP        0.92     LA        0.75     MK        1.01     
!   NL        0.96     OV        0.86     PT        0.91     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.171910Jy  sigma=0.001417
! Fit after  self-cal, rms=0.170501Jy  sigma=0.001369
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.608 mas, bmaj=14.91 mas, bpa=-20.03 degrees
! Estimated noise=479.262 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00252562 Jy
! Component: 100  -  total flux cleaned = -0.0025856 Jy
! Component: 150  -  total flux cleaned = -0.00263434 Jy
! Component: 200  -  total flux cleaned = -0.00271836 Jy
! Total flux subtracted in 200 components = -0.00271836 Jy
! Clean residual min=-0.002405 max=0.003379 Jy/beam
! Clean residual mean=-0.000004 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.261555 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.261555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170457Jy  sigma=0.001368
! Fit after  self-cal, rms=0.170411Jy  sigma=0.001368
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170411Jy  sigma=0.001368
! Fit after  self-cal, rms=0.171786Jy  sigma=0.001367
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.61 mas, bmaj=14.95 mas, bpa=-20.11 degrees
! Estimated noise=478.732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00177031 Jy
! Component: 100  -  total flux cleaned = -0.00189694 Jy
! Component: 150  -  total flux cleaned = -0.00197231 Jy
! Component: 200  -  total flux cleaned = -0.00207181 Jy
! Total flux subtracted in 200 components = -0.00207181 Jy
! Clean residual min=-0.002347 max=0.003274 Jy/beam
! Clean residual mean=-0.000011 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.259484 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.259484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171761Jy  sigma=0.001367
! Fit after  self-cal, rms=0.171772Jy  sigma=0.001367
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.32283e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106444 Jy
! Component: 150  -  total flux cleaned = -0.000212128 Jy
! Component: 200  -  total flux cleaned = -0.000285086 Jy
! Total flux subtracted in 200 components = -0.000285086 Jy
! Clean residual min=-0.002337 max=0.003217 Jy/beam
! Clean residual mean=-0.000012 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.259198 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 58 components and 0.259198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171760Jy  sigma=0.001367
! Fit after  self-cal, rms=0.171758Jy  sigma=0.001367
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171758Jy  sigma=0.001367
! Fit after  self-cal, rms=0.174074Jy  sigma=0.001366
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.615 mas, bmaj=15 mas, bpa=-20.19 degrees
! Estimated noise=478.964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108015 Jy
! Component: 100  -  total flux cleaned = -0.00121716 Jy
! Component: 150  -  total flux cleaned = -0.00130395 Jy
! Component: 200  -  total flux cleaned = -0.00135469 Jy
! Total flux subtracted in 200 components = -0.00135469 Jy
! Clean residual min=-0.002001 max=0.002888 Jy/beam
! Clean residual mean=-0.000015 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.257844 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 0.257844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174058Jy  sigma=0.001366
! Fit after  self-cal, rms=0.174100Jy  sigma=0.001366
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.96576e-05 Jy
! Component: 100  -  total flux cleaned = -0.00011617 Jy
! Component: 150  -  total flux cleaned = -0.00016001 Jy
! Component: 200  -  total flux cleaned = -0.000200208 Jy
! Total flux subtracted in 200 components = -0.000200208 Jy
! Clean residual min=-0.001967 max=0.002858 Jy/beam
! Clean residual mean=-0.000015 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.257644 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.257644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174091Jy  sigma=0.001366
! Fit after  self-cal, rms=0.174091Jy  sigma=0.001366
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174091Jy  sigma=0.001366
! Fit after  self-cal, rms=0.174966Jy  sigma=0.001366
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.308 mas, bmaj=24.37 mas, bpa=-5.595 degrees
! Estimated noise=520.871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000597969 Jy
! Component: 100  -  total flux cleaned = -0.000654174 Jy
! Component: 150  -  total flux cleaned = -0.00066656 Jy
! Component: 200  -  total flux cleaned = -0.000678526 Jy
! Total flux subtracted in 200 components = -0.000678526 Jy
! Clean residual min=-0.002142 max=0.002353 Jy/beam
! Clean residual mean=-0.000019 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.256965 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 83 components and 0.256965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174964Jy  sigma=0.001366
! Fit after  self-cal, rms=0.174974Jy  sigma=0.001366
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.75393e-06 Jy
! Component: 100  -  total flux cleaned = -8.60351e-06 Jy
! Component: 150  -  total flux cleaned = -8.61479e-06 Jy
! Component: 200  -  total flux cleaned = -1.85117e-05 Jy
! Total flux subtracted in 200 components = -1.85117e-05 Jy
! Clean residual min=-0.002136 max=0.002347 Jy/beam
! Clean residual mean=-0.000019 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.256947 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.256947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174974Jy  sigma=0.001366
! Fit after  self-cal, rms=0.174974Jy  sigma=0.001366
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.616 mas, bmaj=15.02 mas, bpa=-20.24 degrees
! Estimated noise=478.912 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.616 x 15.02 at -20.24 degrees (North through East)
! Clean map  min=-0.0019106  max=0.24315 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.725 mas, bmaj=13.17 mas, bpa=-21.49 degrees
! Estimated noise=1043.12 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19056 Jy
! Component: 100  -  total flux cleaned = 0.235116 Jy
! Component: 150  -  total flux cleaned = 0.25288 Jy
! Component: 200  -  total flux cleaned = 0.258035 Jy
! Total flux subtracted in 200 components = 0.258035 Jy
! Clean residual min=-0.006538 max=0.006417 Jy/beam
! Clean residual mean=-0.000010 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 0.258035 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.258035 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.616 mas, bmaj=15.02 mas, bpa=-20.24 degrees
! Estimated noise=478.912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000961499 Jy
! Component: 100  -  total flux cleaned = 0.000876117 Jy
! Component: 150  -  total flux cleaned = 0.000728408 Jy
! Component: 200  -  total flux cleaned = 0.000669412 Jy
! Total flux subtracted in 200 components = 0.000669412 Jy
! Clean residual min=-0.002095 max=0.002890 Jy/beam
! Clean residual mean=-0.000007 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.258704 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.258704 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.205 mas, bmaj=13.64 mas, bpa=-19.03 degrees
! Estimated noise=569.949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000303086 Jy
! Component: 100  -  total flux cleaned = 0.000175118 Jy
! Component: 150  -  total flux cleaned = 6.36168e-05 Jy
! Component: 200  -  total flux cleaned = -0.000141165 Jy
! Total flux subtracted in 200 components = -0.000141165 Jy
! Clean residual min=-0.002471 max=0.003145 Jy/beam
! Clean residual mean=-0.000010 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.258563 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140622 Jy
! Component: 100  -  total flux cleaned = -0.000309606 Jy
! Component: 150  -  total flux cleaned = -0.000428161 Jy
! Component: 200  -  total flux cleaned = -0.000539552 Jy
! Total flux subtracted in 200 components = -0.000539552 Jy
! Clean residual min=-0.002408 max=0.003052 Jy/beam
! Clean residual mean=-0.000012 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.258024 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 42 components and 0.258024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174976Jy  sigma=0.001366
! Fit after  self-cal, rms=0.174950Jy  sigma=0.001366
wmodel J0052-2825_S_2011_08_02_pus_map.mod
! Writing 42 model components to file: J0052-2825_S_2011_08_02_pus_map.mod
wobs J0052-2825_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J0052-2825_S_2011_08_02_pus_uvs.fits
wwins J0052-2825_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J0052-2825_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103761 Jy
! Component: 100  -  total flux cleaned = 0.00156609 Jy
! Component: 150  -  total flux cleaned = 0.00206891 Jy
! Component: 200  -  total flux cleaned = 0.00251326 Jy
! Component: 250  -  total flux cleaned = 0.00282571 Jy
! Component: 300  -  total flux cleaned = 0.00305294 Jy
! Component: 350  -  total flux cleaned = 0.00334735 Jy
! Component: 400  -  total flux cleaned = 0.00352596 Jy
! Component: 450  -  total flux cleaned = 0.00376851 Jy
! Component: 500  -  total flux cleaned = 0.00380118 Jy
! Component: 550  -  total flux cleaned = 0.00383362 Jy
! Component: 600  -  total flux cleaned = 0.00393088 Jy
! Component: 650  -  total flux cleaned = 0.00399426 Jy
! Component: 700  -  total flux cleaned = 0.00408791 Jy
! Component: 750  -  total flux cleaned = 0.00417897 Jy
! Component: 800  -  total flux cleaned = 0.00423878 Jy
! Component: 850  -  total flux cleaned = 0.0042399 Jy
! Component: 900  -  total flux cleaned = 0.00429779 Jy
! Component: 950  -  total flux cleaned = 0.00426933 Jy
! Component: 1000  -  total flux cleaned = 0.00424134 Jy
! Component: 1050  -  total flux cleaned = 0.00413303 Jy
! Component: 1100  -  total flux cleaned = 0.00402712 Jy
! Component: 1150  -  total flux cleaned = 0.00402695 Jy
! Component: 1200  -  total flux cleaned = 0.00392323 Jy
! Component: 1250  -  total flux cleaned = 0.00382179 Jy
! Component: 1300  -  total flux cleaned = 0.0037469 Jy
! Component: 1350  -  total flux cleaned = 0.00369771 Jy
! Component: 1400  -  total flux cleaned = 0.00360087 Jy
! Component: 1450  -  total flux cleaned = 0.0035533 Jy
! Component: 1500  -  total flux cleaned = 0.00345919 Jy
! Component: 1550  -  total flux cleaned = 0.00336663 Jy
! Component: 1600  -  total flux cleaned = 0.00329778 Jy
! Component: 1650  -  total flux cleaned = 0.00325243 Jy
! Component: 1700  -  total flux cleaned = 0.00314062 Jy
! Component: 1750  -  total flux cleaned = 0.00309633 Jy
! Component: 1800  -  total flux cleaned = 0.00296581 Jy
! Component: 1850  -  total flux cleaned = 0.00294448 Jy
! Component: 1900  -  total flux cleaned = 0.00281732 Jy
! Component: 1950  -  total flux cleaned = 0.00285957 Jy
! Component: 2000  -  total flux cleaned = 0.00271485 Jy
! Total flux subtracted in 2048 components = 0.00269444 Jy
! Clean residual min=-0.001149 max=0.001472 Jy/beam
! Clean residual mean=-0.000004 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.260718 Jy
keep
! Adding 151 model components to the UV plane model.
! The established model now contains 193 components and 0.260718 Jy
![Exited script file: muppet]
wmap "J0052-2825_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.205 x 13.64 at -19.03 degrees (North through East)
! Clean map  min=-0.0021659  max=0.23951 Jy/beam
! Writing clean map to FITS file: J0052-2825_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.239509 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000447167 
device "J0052-2825_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J0052-2825_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.560106 0.560106 1.12021 2.24042 4.48085 8.96169 17.9234 35.8468 71.6936
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.239 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.205 x 13.64 at -19.03 degrees (North through East)
! Clean map  min=-0.0021659  max=0.23951 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0052-2825_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J0052-2825_S_2011_08_02_pus_map.gif/vgif'
mapplot cln