! Started logfile: J0049-3116_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:49:30 2012 obs J0049-3116_X_2011_08_02_pus_uva.fits ! Reading UV FITS file: J0049-3116_X_2011_08_02_pus_uva.fits ! AN table 1: 180 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.316311 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0049-3116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3146 lines of history. ! ! Reading 17764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0049-3116_X_2011_08_02_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1010 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 994 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1010 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1078 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934608Jy sigma=0.009507 ! Fit after self-cal, rms=0.899174Jy sigma=0.009173 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7352 mas, bmaj=4.167 mas, bpa=-23.95 degrees ! Estimated noise=1372.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0807168 Jy ! Component: 100 - total flux cleaned = 0.0999944 Jy ! Total flux subtracted in 100 components = 0.0999944 Jy ! Clean residual min=-0.006351 max=0.008094 Jy/beam ! Clean residual mean=-0.000002 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 0.0999944 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0999944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131268Jy sigma=0.001276 ! Fit after self-cal, rms=0.131177Jy sigma=0.001275 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9952 mas, bmaj=4.837 mas, bpa=-23.68 degrees ! Estimated noise=537.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116181 Jy ! Component: 100 - total flux cleaned = 0.0170325 Jy ! Component: 150 - total flux cleaned = 0.0203389 Jy ! Component: 200 - total flux cleaned = 0.0225384 Jy ! Total flux subtracted in 200 components = 0.0225384 Jy ! Clean residual min=-0.004663 max=0.003333 Jy/beam ! Clean residual mean=0.000032 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.122533 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 69 components and 0.122533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130186Jy sigma=0.001265 ! Fit after self-cal, rms=0.130155Jy sigma=0.001264 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.89 FT 1.00* HH 1.00* ! HN 1.00* KP 0.94 LA 1.06 MK 1.02 ! NL 0.93 OV 1.02 PT 1.02 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.92 FT 1.00* HH 1.00* ! HN 1.01 KP 0.89 LA 1.04 MK 1.05 ! NL 1.09 OV 1.05 PT 1.14 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 FT 1.00* HH 1.00* ! HN 1.00* KP 0.76 LA 0.99 MK 1.00 ! NL 1.04 OV 1.00 PT 1.02 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 FT 1.00* HH 1.00* ! HN 1.00* KP 0.90 LA 1.10 MK 1.08 ! NL 1.02 OV 1.10 PT 1.09 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.130155Jy sigma=0.001264 ! Fit after self-cal, rms=0.128225Jy sigma=0.001256 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=4.877 mas, bpa=-23.57 degrees ! Estimated noise=534.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834756 Jy ! Component: 100 - total flux cleaned = 0.000870392 Jy ! Component: 150 - total flux cleaned = 0.000899052 Jy ! Component: 200 - total flux cleaned = 0.000947275 Jy ! Total flux subtracted in 200 components = 0.000947275 Jy ! Clean residual min=-0.002485 max=0.002710 Jy/beam ! Clean residual mean=0.000025 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.12348 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.12348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128206Jy sigma=0.001256 ! Fit after self-cal, rms=0.128301Jy sigma=0.001255 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128301Jy sigma=0.001255 ! Fit after self-cal, rms=0.128673Jy sigma=0.001255 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=4.875 mas, bpa=-23.57 degrees ! Estimated noise=535.677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689806 Jy ! Component: 100 - total flux cleaned = 0.000634489 Jy ! Component: 150 - total flux cleaned = 0.000680117 Jy ! Component: 200 - total flux cleaned = 0.000659905 Jy ! Total flux subtracted in 200 components = 0.000659905 Jy ! Clean residual min=-0.002393 max=0.002657 Jy/beam ! Clean residual mean=0.000019 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.12414 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.12414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128661Jy sigma=0.001255 ! Fit after self-cal, rms=0.128692Jy sigma=0.001255 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149268 Jy ! Component: 100 - total flux cleaned = 0.000125583 Jy ! Component: 150 - total flux cleaned = 0.000176365 Jy ! Component: 200 - total flux cleaned = 0.00020805 Jy ! Total flux subtracted in 200 components = 0.00020805 Jy ! Clean residual min=-0.002399 max=0.002601 Jy/beam ! Clean residual mean=0.000020 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.124348 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.124348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128685Jy sigma=0.001255 ! Fit after self-cal, rms=0.128686Jy sigma=0.001255 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128686Jy sigma=0.001255 ! Fit after self-cal, rms=0.128843Jy sigma=0.001254 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=4.864 mas, bpa=-23.62 degrees ! Estimated noise=535.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581371 Jy ! Component: 100 - total flux cleaned = 0.000459605 Jy ! Component: 150 - total flux cleaned = 0.000393985 Jy ! Component: 200 - total flux cleaned = 0.000394245 Jy ! Total flux subtracted in 200 components = 0.000394245 Jy ! Clean residual min=-0.002085 max=0.002491 Jy/beam ! Clean residual mean=0.000018 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.124742 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 0.124742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128836Jy sigma=0.001254 ! Fit after self-cal, rms=0.128864Jy sigma=0.001254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.56501e-06 Jy ! Component: 100 - total flux cleaned = -9.97712e-05 Jy ! Component: 150 - total flux cleaned = -8.55506e-05 Jy ! Component: 200 - total flux cleaned = -7.24795e-05 Jy ! Total flux subtracted in 200 components = -7.24795e-05 Jy ! Clean residual min=-0.002100 max=0.002467 Jy/beam ! Clean residual mean=0.000019 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.12467 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 97 components and 0.12467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128860Jy sigma=0.001254 ! Fit after self-cal, rms=0.128858Jy sigma=0.001254 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128858Jy sigma=0.001254 ! Fit after self-cal, rms=0.128873Jy sigma=0.001254 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=7.402 mas, bpa=-4.44 degrees ! Estimated noise=617.622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065858 Jy ! Component: 100 - total flux cleaned = 0.000625552 Jy ! Component: 150 - total flux cleaned = 0.00061398 Jy ! Component: 200 - total flux cleaned = 0.000635206 Jy ! Total flux subtracted in 200 components = 0.000635206 Jy ! Clean residual min=-0.002292 max=0.002845 Jy/beam ! Clean residual mean=0.000026 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.125305 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.125305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128876Jy sigma=0.001254 ! Fit after self-cal, rms=0.128887Jy sigma=0.001254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219106 Jy ! Component: 100 - total flux cleaned = 0.00200268 Jy ! Component: 150 - total flux cleaned = 0.00191641 Jy ! Component: 200 - total flux cleaned = 0.00191193 Jy ! Total flux subtracted in 200 components = 0.00191193 Jy ! Clean residual min=-0.001655 max=0.001854 Jy/beam ! Clean residual mean=0.000018 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.127217 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 135 components and 0.127217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128844Jy sigma=0.001253 ! Fit after self-cal, rms=0.128819Jy sigma=0.001253 ! Inverting map ! Added new window around map position (-16.6, -24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111133 Jy ! Component: 100 - total flux cleaned = 0.000932739 Jy ! Component: 150 - total flux cleaned = 0.000777128 Jy ! Component: 200 - total flux cleaned = 0.000710796 Jy ! Total flux subtracted in 200 components = 0.000710796 Jy ! Clean residual min=-0.001457 max=0.001360 Jy/beam ! Clean residual mean=0.000020 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.127928 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 166 components and 0.127928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128789Jy sigma=0.001253 ! Fit after self-cal, rms=0.128768Jy sigma=0.001253 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=4.855 mas, bpa=-23.65 degrees ! Estimated noise=535.638 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.008 x 4.855 at -23.65 degrees (North through East) ! Clean map min=-0.0017004 max=0.10589 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7425 mas, bmaj=4.192 mas, bpa=-23.91 degrees ! Estimated noise=1385.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0808575 Jy ! Component: 100 - total flux cleaned = 0.100944 Jy ! Component: 150 - total flux cleaned = 0.109962 Jy ! Component: 200 - total flux cleaned = 0.114401 Jy ! Total flux subtracted in 200 components = 0.114401 Jy ! Clean residual min=-0.006096 max=0.005846 Jy/beam ! Clean residual mean=0.000002 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.114401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.114401 Jy ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=4.855 mas, bpa=-23.65 degrees ! Estimated noise=535.638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620968 Jy ! Component: 100 - total flux cleaned = 0.00802634 Jy ! Component: 150 - total flux cleaned = 0.00868 Jy ! Component: 200 - total flux cleaned = 0.0092403 Jy ! Total flux subtracted in 200 components = 0.0092403 Jy ! Clean residual min=-0.002029 max=0.001924 Jy/beam ! Clean residual mean=0.000013 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.123641 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.123641 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9876 mas, bmaj=4.679 mas, bpa=-23.34 degrees ! Estimated noise=562.078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136197 Jy ! Component: 100 - total flux cleaned = 0.000392767 Jy ! Component: 150 - total flux cleaned = 0.00068683 Jy ! Component: 200 - total flux cleaned = 0.00106912 Jy ! Total flux subtracted in 200 components = 0.00106912 Jy ! Clean residual min=-0.001830 max=0.002064 Jy/beam ! Clean residual mean=0.000008 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.12471 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304974 Jy ! Component: 100 - total flux cleaned = 0.000641507 Jy ! Component: 150 - total flux cleaned = 0.000870052 Jy ! Component: 200 - total flux cleaned = 0.00117329 Jy ! Total flux subtracted in 200 components = 0.00117329 Jy ! Clean residual min=-0.001734 max=0.001932 Jy/beam ! Clean residual mean=0.000007 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.125883 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 98 components and 0.125883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128723Jy sigma=0.001252 ! Fit after self-cal, rms=0.128710Jy sigma=0.001252 wmodel J0049-3116_X_2011_08_02_pus_map.mod ! Writing 98 model components to file: J0049-3116_X_2011_08_02_pus_map.mod wobs J0049-3116_X_2011_08_02_pus_uvs.fits ! Writing UV FITS file: J0049-3116_X_2011_08_02_pus_uvs.fits wwins J0049-3116_X_2011_08_02_pus_map.win ! wwins: Wrote 3 windows to J0049-3116_X_2011_08_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481141 Jy ! Component: 100 - total flux cleaned = 0.000388915 Jy ! Component: 150 - total flux cleaned = 0.00018608 Jy ! Component: 200 - total flux cleaned = 0.000103223 Jy ! Component: 250 - total flux cleaned = -2.91008e-06 Jy ! Component: 300 - total flux cleaned = -5.43305e-05 Jy ! Component: 350 - total flux cleaned = -0.000128844 Jy ! Component: 400 - total flux cleaned = -0.000105311 Jy ! Component: 450 - total flux cleaned = -0.000152543 Jy ! Component: 500 - total flux cleaned = -0.000220732 Jy ! Component: 550 - total flux cleaned = -0.00028718 Jy ! Component: 600 - total flux cleaned = -0.000373556 Jy ! Component: 650 - total flux cleaned = -0.000415438 Jy ! Component: 700 - total flux cleaned = -0.000498013 Jy ! Component: 750 - total flux cleaned = -0.000518326 Jy ! Component: 800 - total flux cleaned = -0.000459011 Jy ! Component: 850 - total flux cleaned = -0.000381528 Jy ! Component: 900 - total flux cleaned = -0.000362326 Jy ! Component: 950 - total flux cleaned = -0.000324363 Jy ! Component: 1000 - total flux cleaned = -0.000250026 Jy ! Component: 1050 - total flux cleaned = -0.000250076 Jy ! Component: 1100 - total flux cleaned = -0.000232114 Jy ! Component: 1150 - total flux cleaned = -0.000249999 Jy ! Component: 1200 - total flux cleaned = -0.000250176 Jy ! Component: 1250 - total flux cleaned = -0.000267671 Jy ! Component: 1300 - total flux cleaned = -0.000318286 Jy ! Component: 1350 - total flux cleaned = -0.000268339 Jy ! Component: 1400 - total flux cleaned = -0.000334364 Jy ! Component: 1450 - total flux cleaned = -0.000399009 Jy ! Component: 1500 - total flux cleaned = -0.000398985 Jy ! Component: 1550 - total flux cleaned = -0.000478483 Jy ! Component: 1600 - total flux cleaned = -0.000525416 Jy ! Component: 1650 - total flux cleaned = -0.000587275 Jy ! Component: 1700 - total flux cleaned = -0.000617884 Jy ! Component: 1750 - total flux cleaned = -0.000632846 Jy ! Component: 1800 - total flux cleaned = -0.000617842 Jy ! Component: 1850 - total flux cleaned = -0.000602939 Jy ! Component: 1900 - total flux cleaned = -0.000617612 Jy ! Component: 1950 - total flux cleaned = -0.000559286 Jy ! Component: 2000 - total flux cleaned = -0.000573648 Jy ! Total flux subtracted in 2048 components = -0.000573711 Jy ! Clean residual min=-0.000795 max=0.000776 Jy/beam ! Clean residual mean=-0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.12531 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 231 components and 0.12531 Jy ![Exited script file: muppet] wmap "J0049-3116_X_2011_08_02_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9876 x 4.679 at -23.34 degrees (North through East) ! Clean map min=-0.0016494 max=0.10548 Jy/beam ! Writing clean map to FITS file: J0049-3116_X_2011_08_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105475 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000289149 device "J0049-3116_X_2011_08_02_pus\_map.eps/VPS" ! Attempting to open device: 'J0049-3116_X_2011_08_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.822419 0.822419 1.64484 3.28968 6.57935 13.1587 26.3174 52.6348 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9876 x 4.679 at -23.34 degrees (North through East) ! Clean map min=-0.0016494 max=0.10548 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0049-3116_X_2011_08_02_pus\_map.gif/vgif" ! Attempting to open device: 'J0049-3116_X_2011_08_02_pus_map.gif/vgif' mapplot cln