! Started logfile: J0049-3116_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:11:44 2012
obs J0049-3116_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J0049-3116_S_2011_08_02_pus_uva.fits
! AN table 1: 180 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.316311 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0049-3116
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 17764 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0049-3116_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 994 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 994 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 994 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 994 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.892355Jy  sigma=0.009364
! Fit after  self-cal, rms=0.868532Jy  sigma=0.009170
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.845 mas, bmaj=14.9 mas, bpa=-22.84 degrees
! Estimated noise=1414.82 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110495 Jy
! Component: 100  -  total flux cleaned = 0.134621 Jy
! Total flux subtracted in 100 components = 0.134621 Jy
! Clean residual min=-0.008129 max=0.009741 Jy/beam
! Clean residual mean=-0.000018 rms=0.002510 Jy/beam
! Combined flux in latest and established models = 0.134621 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.134621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140576Jy  sigma=0.001298
! Fit after  self-cal, rms=0.140563Jy  sigma=0.001298
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.913 mas, bmaj=17.74 mas, bpa=-23.04 degrees
! Estimated noise=516.414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430998 Jy
! Component: 100  -  total flux cleaned = 0.00444764 Jy
! Component: 150  -  total flux cleaned = 0.00444827 Jy
! Component: 200  -  total flux cleaned = 0.00461402 Jy
! Total flux subtracted in 200 components = 0.00461402 Jy
! Clean residual min=-0.004889 max=0.005192 Jy/beam
! Clean residual mean=0.000041 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.139235 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 24 components and 0.139235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140208Jy  sigma=0.001295
! Fit after  self-cal, rms=0.140192Jy  sigma=0.001295
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.09     FT        1.00*    HH        1.00*    
!   HN        0.92     KP        0.97     LA        1.07     MK        0.83     
!   NL        0.95     OV        0.93     PT        1.06     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.23     FT        1.00*    HH        1.00*    
!   HN        1.06     KP        1.01     LA        0.94     MK        0.97     
!   NL        1.03     OV        0.99     PT        0.98     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.22     FT        1.00*    HH        1.00*    
!   HN        0.94     KP        0.99     LA        0.96     MK        1.01     
!   NL        1.09     OV        0.99     PT        0.97     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.19     FT        1.00*    HH        1.00*    
!   HN        1.08     KP        0.90     LA        0.78     MK        1.07     
!   NL        0.99     OV        0.83     PT        0.94     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.140192Jy  sigma=0.001295
! Fit after  self-cal, rms=0.134675Jy  sigma=0.001277
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.886 mas, bmaj=17.78 mas, bpa=-23.32 degrees
! Estimated noise=512.421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546868 Jy
! Component: 100  -  total flux cleaned = 0.00051136 Jy
! Component: 150  -  total flux cleaned = 0.000541132 Jy
! Component: 200  -  total flux cleaned = 0.000541785 Jy
! Total flux subtracted in 200 components = 0.000541785 Jy
! Clean residual min=-0.002407 max=0.001968 Jy/beam
! Clean residual mean=-0.000058 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.139777 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.139777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134656Jy  sigma=0.001277
! Fit after  self-cal, rms=0.134619Jy  sigma=0.001276
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134619Jy  sigma=0.001276
! Fit after  self-cal, rms=0.134187Jy  sigma=0.001276
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.876 mas, bmaj=17.77 mas, bpa=-23.35 degrees
! Estimated noise=511.877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366323 Jy
! Component: 100  -  total flux cleaned = 0.000295379 Jy
! Component: 150  -  total flux cleaned = 0.000254017 Jy
! Component: 200  -  total flux cleaned = 0.000254759 Jy
! Total flux subtracted in 200 components = 0.000254759 Jy
! Clean residual min=-0.002438 max=0.001990 Jy/beam
! Clean residual mean=-0.000063 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.140032 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.140032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134178Jy  sigma=0.001276
! Fit after  self-cal, rms=0.134172Jy  sigma=0.001276
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118012 Jy
! Component: 100  -  total flux cleaned = 6.50039e-05 Jy
! Component: 150  -  total flux cleaned = 3.53191e-05 Jy
! Component: 200  -  total flux cleaned = 4.96694e-05 Jy
! Total flux subtracted in 200 components = 4.96694e-05 Jy
! Clean residual min=-0.002431 max=0.001971 Jy/beam
! Clean residual mean=-0.000063 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.140082 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.140082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134167Jy  sigma=0.001276
! Fit after  self-cal, rms=0.134165Jy  sigma=0.001276
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134165Jy  sigma=0.001276
! Fit after  self-cal, rms=0.134564Jy  sigma=0.001275
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=17.78 mas, bpa=-23.36 degrees
! Estimated noise=511.788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259437 Jy
! Component: 100  -  total flux cleaned = 0.000298683 Jy
! Component: 150  -  total flux cleaned = 0.000333486 Jy
! Component: 200  -  total flux cleaned = 0.000349983 Jy
! Total flux subtracted in 200 components = 0.000349983 Jy
! Clean residual min=-0.002197 max=0.001829 Jy/beam
! Clean residual mean=-0.000047 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.140432 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.140432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134558Jy  sigma=0.001275
! Fit after  self-cal, rms=0.134576Jy  sigma=0.001275
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.37177e-05 Jy
! Component: 100  -  total flux cleaned = -1.273e-05 Jy
! Component: 150  -  total flux cleaned = 1.85062e-06 Jy
! Component: 200  -  total flux cleaned = 2.97404e-05 Jy
! Total flux subtracted in 200 components = 2.97404e-05 Jy
! Clean residual min=-0.002212 max=0.001792 Jy/beam
! Clean residual mean=-0.000048 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.140461 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.140461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134573Jy  sigma=0.001275
! Fit after  self-cal, rms=0.134570Jy  sigma=0.001275
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134570Jy  sigma=0.001275
! Fit after  self-cal, rms=0.134601Jy  sigma=0.001275
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.314 mas, bmaj=26.5 mas, bpa=-5.473 degrees
! Estimated noise=563.003 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498216 Jy
! Component: 100  -  total flux cleaned = 0.000578928 Jy
! Component: 150  -  total flux cleaned = 0.000619415 Jy
! Component: 200  -  total flux cleaned = 0.000656748 Jy
! Total flux subtracted in 200 components = 0.000656748 Jy
! Clean residual min=-0.002398 max=0.001852 Jy/beam
! Clean residual mean=-0.000064 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.141118 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 77 components and 0.141118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134598Jy  sigma=0.001275
! Fit after  self-cal, rms=0.134601Jy  sigma=0.001275
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.67421e-05 Jy
! Component: 100  -  total flux cleaned = 9.22892e-05 Jy
! Component: 150  -  total flux cleaned = 0.000124576 Jy
! Component: 200  -  total flux cleaned = 0.00014701 Jy
! Total flux subtracted in 200 components = 0.00014701 Jy
! Clean residual min=-0.002385 max=0.001833 Jy/beam
! Clean residual mean=-0.000063 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.141265 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 81 components and 0.141265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134601Jy  sigma=0.001275
! Fit after  self-cal, rms=0.134603Jy  sigma=0.001275
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.867 mas, bmaj=17.78 mas, bpa=-23.37 degrees
! Estimated noise=512.141 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.867 x 17.78 at -23.37 degrees (North through East)
! Clean map  min=-0.0031167  max=0.13961 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.816 mas, bmaj=14.88 mas, bpa=-23.17 degrees
! Estimated noise=1376.53 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107744 Jy
! Component: 100  -  total flux cleaned = 0.131334 Jy
! Component: 150  -  total flux cleaned = 0.138564 Jy
! Component: 200  -  total flux cleaned = 0.140828 Jy
! Total flux subtracted in 200 components = 0.140828 Jy
! Clean residual min=-0.006822 max=0.006232 Jy/beam
! Clean residual mean=-0.000025 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.140828 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.140828 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.867 mas, bmaj=17.78 mas, bpa=-23.37 degrees
! Estimated noise=512.141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000865639 Jy
! Component: 100  -  total flux cleaned = 0.000976522 Jy
! Component: 150  -  total flux cleaned = 0.00106052 Jy
! Component: 200  -  total flux cleaned = 0.00108895 Jy
! Total flux subtracted in 200 components = 0.00108895 Jy
! Clean residual min=-0.002217 max=0.001856 Jy/beam
! Clean residual mean=-0.000043 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.141917 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 31 components and 0.141917 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.528 mas, bmaj=16.87 mas, bpa=-23.6 degrees
! Estimated noise=558.037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.18304e-05 Jy
! Component: 100  -  total flux cleaned = 1.96062e-05 Jy
! Component: 150  -  total flux cleaned = -8.43745e-06 Jy
! Component: 200  -  total flux cleaned = -3.38768e-05 Jy
! Total flux subtracted in 200 components = -3.38768e-05 Jy
! Clean residual min=-0.002417 max=0.002056 Jy/beam
! Clean residual mean=-0.000038 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.141883 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.31355e-05 Jy
! Component: 100  -  total flux cleaned = -2.36922e-05 Jy
! Component: 150  -  total flux cleaned = -4.54108e-05 Jy
! Component: 200  -  total flux cleaned = -8.635e-05 Jy
! Total flux subtracted in 200 components = -8.635e-05 Jy
! Clean residual min=-0.002404 max=0.002036 Jy/beam
! Clean residual mean=-0.000038 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.141797 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 53 components and 0.141797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134605Jy  sigma=0.001275
! Fit after  self-cal, rms=0.134603Jy  sigma=0.001275
wmodel J0049-3116_S_2011_08_02_pus_map.mod
! Writing 53 model components to file: J0049-3116_S_2011_08_02_pus_map.mod
wobs J0049-3116_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J0049-3116_S_2011_08_02_pus_uvs.fits
wwins J0049-3116_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J0049-3116_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109071 Jy
! Component: 100  -  total flux cleaned = -0.00156571 Jy
! Component: 150  -  total flux cleaned = -0.00197686 Jy
! Component: 200  -  total flux cleaned = -0.00215462 Jy
! Component: 250  -  total flux cleaned = -0.00232577 Jy
! Component: 300  -  total flux cleaned = -0.00239281 Jy
! Component: 350  -  total flux cleaned = -0.00248978 Jy
! Component: 400  -  total flux cleaned = -0.00261496 Jy
! Component: 450  -  total flux cleaned = -0.00282798 Jy
! Component: 500  -  total flux cleaned = -0.00306534 Jy
! Component: 550  -  total flux cleaned = -0.00326872 Jy
! Component: 600  -  total flux cleaned = -0.00346748 Jy
! Component: 650  -  total flux cleaned = -0.00366221 Jy
! Component: 700  -  total flux cleaned = -0.00396089 Jy
! Component: 750  -  total flux cleaned = -0.00417307 Jy
! Component: 800  -  total flux cleaned = -0.00435461 Jy
! Component: 850  -  total flux cleaned = -0.0045327 Jy
! Component: 900  -  total flux cleaned = -0.00473218 Jy
! Component: 950  -  total flux cleaned = -0.00492793 Jy
! Component: 1000  -  total flux cleaned = -0.00511987 Jy
! Component: 1050  -  total flux cleaned = -0.00537948 Jy
! Component: 1100  -  total flux cleaned = -0.00561149 Jy
! Component: 1150  -  total flux cleaned = -0.00581671 Jy
! Component: 1200  -  total flux cleaned = -0.00606343 Jy
! Component: 1250  -  total flux cleaned = -0.00626163 Jy
! Component: 1300  -  total flux cleaned = -0.00650045 Jy
! Component: 1350  -  total flux cleaned = -0.00669269 Jy
! Component: 1400  -  total flux cleaned = -0.00692387 Jy
! Component: 1450  -  total flux cleaned = -0.00713115 Jy
! Component: 1500  -  total flux cleaned = -0.0072948 Jy
! Component: 1550  -  total flux cleaned = -0.00747649 Jy
! Component: 1600  -  total flux cleaned = -0.00757641 Jy
! Component: 1650  -  total flux cleaned = -0.00773421 Jy
! Component: 1700  -  total flux cleaned = -0.00788954 Jy
! Component: 1750  -  total flux cleaned = -0.00802367 Jy
! Component: 1800  -  total flux cleaned = -0.00809948 Jy
! Component: 1850  -  total flux cleaned = -0.00819301 Jy
! Component: 1900  -  total flux cleaned = -0.00834109 Jy
! Component: 1950  -  total flux cleaned = -0.00843281 Jy
! Component: 2000  -  total flux cleaned = -0.00855985 Jy
! Total flux subtracted in 2048 components = -0.00864942 Jy
! Clean residual min=-0.001134 max=0.001227 Jy/beam
! Clean residual mean=-0.000020 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.133148 Jy
keep
! Adding 127 model components to the UV plane model.
! The established model now contains 180 components and 0.133148 Jy
![Exited script file: muppet]
wmap "J0049-3116_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.528 x 16.87 at -23.6 degrees (North through East)
! Clean map  min=-0.0029153  max=0.13879 Jy/beam
! Writing clean map to FITS file: J0049-3116_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.138786 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000383915 
device "J0049-3116_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J0049-3116_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.829872 0.829872 1.65974 3.31949 6.63897 13.2779 26.5559 53.1118
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.138 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.528 x 16.87 at -23.6 degrees (North through East)
! Clean map  min=-0.0029153  max=0.13879 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0049-3116_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J0049-3116_S_2011_08_02_pus_map.gif/vgif'
mapplot cln