! Started logfile: J2339-1206_S_2011_06_28_pus_uvs.log on Tue Apr 24 22:48:13 2012
obs J2339-1206_S_2011_06_28_pus_uva.fits
! Reading UV FITS file: J2339-1206_S_2011_06_28_pus_uva.fits
! AN table 1: 180 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.202033 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2339-1206
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 4589 lines of history.
! 
! Reading 22256 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2339-1206_S_2011_06_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1739 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1739 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1739 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1739 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.945687Jy  sigma=0.011909
! Fit after  self-cal, rms=0.921740Jy  sigma=0.011635
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.621 mas, bmaj=6.281 mas, bpa=-3.557 degrees
! Estimated noise=699.49 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0657659 Jy
! Component: 100  -  total flux cleaned = 0.0801239 Jy
! Total flux subtracted in 100 components = 0.0801239 Jy
! Clean residual min=-0.002856 max=0.004079 Jy/beam
! Clean residual mean=0.000001 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.0801239 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0801239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105361Jy  sigma=0.001250
! Fit after  self-cal, rms=0.105206Jy  sigma=0.001249
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=7.181 mas, bpa=-3.208 degrees
! Estimated noise=380.001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00350801 Jy
! Component: 100  -  total flux cleaned = 0.00427866 Jy
! Component: 150  -  total flux cleaned = 0.00454164 Jy
! Component: 200  -  total flux cleaned = 0.00463713 Jy
! Total flux subtracted in 200 components = 0.00463713 Jy
! Clean residual min=-0.001667 max=0.001686 Jy/beam
! Clean residual mean=0.000006 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.084761 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 21 components and 0.084761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105095Jy  sigma=0.001247
! Fit after  self-cal, rms=0.105096Jy  sigma=0.001247
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     FT        1.00*    HH        1.00*    
!   HN        1.05     KK        1.00*    KP        0.99     MC        1.00*    
!   MK        0.97     NL        0.96     NY        1.00*    OV        0.99     
!   PT        0.99     SC        1.04     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.00     FT        1.00*    HH        1.00*    
!   HN        0.95     KK        1.00*    KP        1.03     MC        1.00*    
!   MK        1.03     NL        0.97     NY        1.00*    OV        0.98     
!   PT        0.98     SC        0.95     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     FT        1.00*    HH        1.00*    
!   HN        1.17     KK        1.00*    KP        1.02     MC        1.00*    
!   MK        0.99     NL        0.99     NY        1.00*    OV        1.02     
!   PT        1.06     SC        1.02     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     FT        1.00*    HH        1.00*    
!   HN        1.00     KK        1.00*    KP        0.99     MC        1.00*    
!   MK        1.02     NL        0.98     NY        1.00*    OV        0.99     
!   PT        1.03     SC        0.97     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.105096Jy  sigma=0.001247
! Fit after  self-cal, rms=0.104621Jy  sigma=0.001246
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=7.149 mas, bpa=-2.956 degrees
! Estimated noise=377.99 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.27825e-05 Jy
! Component: 100  -  total flux cleaned = -2.06581e-05 Jy
! Component: 150  -  total flux cleaned = -5.26957e-06 Jy
! Component: 200  -  total flux cleaned = 2.14382e-05 Jy
! Total flux subtracted in 200 components = 2.14382e-05 Jy
! Clean residual min=-0.001766 max=0.001623 Jy/beam
! Clean residual mean=0.000006 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.0847825 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.0847825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104615Jy  sigma=0.001246
! Fit after  self-cal, rms=0.104637Jy  sigma=0.001246
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104637Jy  sigma=0.001246
! Fit after  self-cal, rms=0.106518Jy  sigma=0.001244
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=7.131 mas, bpa=-3.045 degrees
! Estimated noise=378.183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251437 Jy
! Component: 100  -  total flux cleaned = 0.000262492 Jy
! Component: 150  -  total flux cleaned = 0.000280248 Jy
! Component: 200  -  total flux cleaned = 0.000304717 Jy
! Total flux subtracted in 200 components = 0.000304717 Jy
! Clean residual min=-0.001522 max=0.001568 Jy/beam
! Clean residual mean=0.000007 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0850872 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 33 components and 0.0850872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106516Jy  sigma=0.001244
! Fit after  self-cal, rms=0.106582Jy  sigma=0.001244
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.96235e-06 Jy
! Component: 100  -  total flux cleaned = -1.31162e-06 Jy
! Component: 150  -  total flux cleaned = 2.08251e-05 Jy
! Component: 200  -  total flux cleaned = 4.1141e-05 Jy
! Total flux subtracted in 200 components = 4.1141e-05 Jy
! Clean residual min=-0.001532 max=0.001574 Jy/beam
! Clean residual mean=0.000007 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0851283 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 34 components and 0.0851283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106580Jy  sigma=0.001244
! Fit after  self-cal, rms=0.106574Jy  sigma=0.001244
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106574Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107012Jy  sigma=0.001244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=7.124 mas, bpa=-3.047 degrees
! Estimated noise=378.211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204685 Jy
! Component: 100  -  total flux cleaned = 0.000227352 Jy
! Component: 150  -  total flux cleaned = 0.000246904 Jy
! Component: 200  -  total flux cleaned = 0.000265109 Jy
! Total flux subtracted in 200 components = 0.000265109 Jy
! Clean residual min=-0.001513 max=0.001583 Jy/beam
! Clean residual mean=0.000007 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0853935 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.0853935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107011Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107016Jy  sigma=0.001244
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22667e-05 Jy
! Component: 100  -  total flux cleaned = 2.44666e-05 Jy
! Component: 150  -  total flux cleaned = 3.56054e-05 Jy
! Component: 200  -  total flux cleaned = 5.15748e-05 Jy
! Total flux subtracted in 200 components = 5.15748e-05 Jy
! Clean residual min=-0.001514 max=0.001592 Jy/beam
! Clean residual mean=0.000007 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.085445 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.085445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107016Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107015Jy  sigma=0.001244
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107015Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107034Jy  sigma=0.001244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.982 mas, bmaj=12.44 mas, bpa=-0.4394 degrees
! Estimated noise=477.272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045566 Jy
! Component: 100  -  total flux cleaned = 0.000503006 Jy
! Component: 150  -  total flux cleaned = 0.000529511 Jy
! Component: 200  -  total flux cleaned = 0.000544392 Jy
! Total flux subtracted in 200 components = 0.000544392 Jy
! Clean residual min=-0.001351 max=0.001376 Jy/beam
! Clean residual mean=0.000016 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.0859894 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 39 components and 0.0859894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107034Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107035Jy  sigma=0.001244
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.34017e-05 Jy
! Component: 100  -  total flux cleaned = 5.91448e-05 Jy
! Component: 150  -  total flux cleaned = 7.10934e-05 Jy
! Component: 200  -  total flux cleaned = 7.6183e-05 Jy
! Total flux subtracted in 200 components = 7.6183e-05 Jy
! Clean residual min=-0.001342 max=0.001370 Jy/beam
! Clean residual mean=0.000016 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.0860656 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 43 components and 0.0860656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107036Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107035Jy  sigma=0.001244
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=7.118 mas, bpa=-3.035 degrees
! Estimated noise=378.319 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.033 x 7.118 at -3.035 degrees (North through East)
! Clean map  min=-0.0014309  max=0.083515 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.633 mas, bmaj=6.225 mas, bpa=-3.337 degrees
! Estimated noise=694.331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0654547 Jy
! Component: 100  -  total flux cleaned = 0.0797614 Jy
! Component: 150  -  total flux cleaned = 0.083225 Jy
! Component: 200  -  total flux cleaned = 0.084699 Jy
! Total flux subtracted in 200 components = 0.084699 Jy
! Clean residual min=-0.002334 max=0.002238 Jy/beam
! Clean residual mean=0.000002 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.084699 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.084699 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=7.118 mas, bpa=-3.035 degrees
! Estimated noise=378.319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230437 Jy
! Component: 100  -  total flux cleaned = 0.000403515 Jy
! Component: 150  -  total flux cleaned = 0.000581169 Jy
! Component: 200  -  total flux cleaned = 0.000736661 Jy
! Total flux subtracted in 200 components = 0.000736661 Jy
! Clean residual min=-0.001591 max=0.001572 Jy/beam
! Clean residual mean=0.000007 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0854357 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.0854357 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.878 mas, bmaj=6.748 mas, bpa=-2.499 degrees
! Estimated noise=409.05 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.2491e-06 Jy
! Component: 100  -  total flux cleaned = 2.75059e-05 Jy
! Component: 150  -  total flux cleaned = 5.31427e-05 Jy
! Component: 200  -  total flux cleaned = 6.43043e-05 Jy
! Total flux subtracted in 200 components = 6.43043e-05 Jy
! Clean residual min=-0.001646 max=0.001733 Jy/beam
! Clean residual mean=0.000005 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0855 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.99332e-06 Jy
! Component: 100  -  total flux cleaned = 3.74969e-05 Jy
! Component: 150  -  total flux cleaned = 5.46938e-05 Jy
! Component: 200  -  total flux cleaned = 7.0989e-05 Jy
! Total flux subtracted in 200 components = 7.0989e-05 Jy
! Clean residual min=-0.001634 max=0.001725 Jy/beam
! Clean residual mean=0.000005 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.085571 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 43 components and 0.085571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107037Jy  sigma=0.001244
! Fit after  self-cal, rms=0.107038Jy  sigma=0.001244
wmodel J2339-1206_S_2011_06_28_pus_map.mod
! Writing 43 model components to file: J2339-1206_S_2011_06_28_pus_map.mod
wobs J2339-1206_S_2011_06_28_pus_uvs.fits
! Writing UV FITS file: J2339-1206_S_2011_06_28_pus_uvs.fits
wwins J2339-1206_S_2011_06_28_pus_map.win
! wwins: Wrote 1 windows to J2339-1206_S_2011_06_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152406 Jy
! Component: 100  -  total flux cleaned = -0.000207405 Jy
! Component: 150  -  total flux cleaned = -2.65744e-05 Jy
! Component: 200  -  total flux cleaned = 0.000270669 Jy
! Component: 250  -  total flux cleaned = 0.000580184 Jy
! Component: 300  -  total flux cleaned = 0.000832684 Jy
! Component: 350  -  total flux cleaned = 0.00110013 Jy
! Component: 400  -  total flux cleaned = 0.00131663 Jy
! Component: 450  -  total flux cleaned = 0.0015487 Jy
! Component: 500  -  total flux cleaned = 0.00171302 Jy
! Component: 550  -  total flux cleaned = 0.00185313 Jy
! Component: 600  -  total flux cleaned = 0.00200939 Jy
! Component: 650  -  total flux cleaned = 0.00218108 Jy
! Component: 700  -  total flux cleaned = 0.00229262 Jy
! Component: 750  -  total flux cleaned = 0.00238424 Jy
! Component: 800  -  total flux cleaned = 0.00250947 Jy
! Component: 850  -  total flux cleaned = 0.0025796 Jy
! Component: 900  -  total flux cleaned = 0.00261421 Jy
! Component: 950  -  total flux cleaned = 0.00264801 Jy
! Component: 1000  -  total flux cleaned = 0.00271487 Jy
! Component: 1050  -  total flux cleaned = 0.00271497 Jy
! Component: 1100  -  total flux cleaned = 0.00277982 Jy
! Component: 1150  -  total flux cleaned = 0.0028113 Jy
! Component: 1200  -  total flux cleaned = 0.00290494 Jy
! Component: 1250  -  total flux cleaned = 0.00288938 Jy
! Component: 1300  -  total flux cleaned = 0.00293484 Jy
! Component: 1350  -  total flux cleaned = 0.00296479 Jy
! Component: 1400  -  total flux cleaned = 0.00302388 Jy
! Component: 1450  -  total flux cleaned = 0.00308189 Jy
! Component: 1500  -  total flux cleaned = 0.00315332 Jy
! Component: 1550  -  total flux cleaned = 0.00316733 Jy
! Component: 1600  -  total flux cleaned = 0.00318104 Jy
! Component: 1650  -  total flux cleaned = 0.00320879 Jy
! Component: 1700  -  total flux cleaned = 0.00329041 Jy
! Component: 1750  -  total flux cleaned = 0.00334419 Jy
! Component: 1800  -  total flux cleaned = 0.00334431 Jy
! Component: 1850  -  total flux cleaned = 0.00339662 Jy
! Component: 1900  -  total flux cleaned = 0.00340953 Jy
! Component: 1950  -  total flux cleaned = 0.00347328 Jy
! Component: 2000  -  total flux cleaned = 0.00344792 Jy
! Total flux subtracted in 2048 components = 0.00343563 Jy
! Clean residual min=-0.000815 max=0.000740 Jy/beam
! Clean residual mean=0.000002 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0890066 Jy
keep
! Adding 125 model components to the UV plane model.
! The established model now contains 168 components and 0.0890066 Jy
![Exited script file: muppet]
wmap "J2339-1206_S_2011_06_28_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.878 x 6.748 at -2.499 degrees (North through East)
! Clean map  min=-0.0011478  max=0.083639 Jy/beam
! Writing clean map to FITS file: J2339-1206_S_2011_06_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0836389 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248402 
device "J2339-1206_S_2011_06_28_pus\_map.eps/VPS"
! Attempting to open device: 'J2339-1206_S_2011_06_28_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.890981 0.890981 1.78196 3.56392 7.12785 14.2557 28.5114 57.0228
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.083 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.878 x 6.748 at -2.499 degrees (North through East)
! Clean map  min=-0.0011478  max=0.083639 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2339-1206_S_2011_06_28_pus\_map.gif/vgif"
! Attempting to open device: 'J2339-1206_S_2011_06_28_pus_map.gif/vgif'
mapplot cln