! Started logfile: J2145+1115_X_2011_06_28_pus_uvs.log on Sat Apr 21 13:09:03 2012
obs J2145+1115_X_2011_06_28_pus_uva.fits
! Reading UV FITS file: J2145+1115_X_2011_06_28_pus_uva.fits
! AN table 1: 131 integrations on 153 of 153 possible baselines.
! AN table 2: 38 integrations on 153 of 153 possible baselines.
! AN table 3: 159 integrations on 153 of 153 possible baselines.
! AN table 4: 107 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.287446 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2145+1115
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 5249 lines of history.
! 
! Reading 76524 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2145+1115_X_2011_06_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 770 telescope corrections were flagged in sub-array 1.
!  A total of 572 telescope corrections were flagged in sub-array 2.
!  A total of 1253 telescope corrections were flagged in sub-array 3.
!  A total of 1484 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 770 telescope corrections were flagged in sub-array 1.
!  A total of 572 telescope corrections were flagged in sub-array 2.
!  A total of 1253 telescope corrections were flagged in sub-array 3.
!  A total of 1484 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 770 telescope corrections were flagged in sub-array 1.
!  A total of 572 telescope corrections were flagged in sub-array 2.
!  A total of 1253 telescope corrections were flagged in sub-array 3.
!  A total of 1484 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 820 telescope corrections were flagged in sub-array 1.
!  A total of 572 telescope corrections were flagged in sub-array 2.
!  A total of 1253 telescope corrections were flagged in sub-array 3.
!  A total of 1484 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=0.764327Jy  sigma=0.007508
! Fit after  self-cal, rms=0.714160Jy  sigma=0.007044
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.26% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.5349 mas, bmaj=1.193 mas, bpa=-6.626 degrees
! Estimated noise=567.347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.247687 Jy
! Component: 100  -  total flux cleaned = 0.315626 Jy
! Total flux subtracted in 100 components = 0.315626 Jy
! Clean residual min=-0.008818 max=0.027949 Jy/beam
! Clean residual mean=0.000033 rms=0.002237 Jy/beam
! Combined flux in latest and established models = 0.315626 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.315626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178653Jy  sigma=0.001470
! Fit after  self-cal, rms=0.178722Jy  sigma=0.001470
! Inverting map 
! Your choice of large map pixels excluded 5.26% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0296756 Jy
! Component: 100  -  total flux cleaned = 0.0437286 Jy
! Total flux subtracted in 100 components = 0.0437286 Jy
! Clean residual min=-0.007441 max=0.009789 Jy/beam
! Clean residual mean=0.000020 rms=0.001508 Jy/beam
! Combined flux in latest and established models = 0.359354 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.359354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174643Jy  sigma=0.001398
! Fit after  self-cal, rms=0.174696Jy  sigma=0.001398
! Inverting map 
! Your choice of large map pixels excluded 5.26% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Added new window around map position (0.4, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00920708 Jy
! Component: 100  -  total flux cleaned = 0.0110405 Jy
! Total flux subtracted in 100 components = 0.0110405 Jy
! Clean residual min=-0.006874 max=0.007969 Jy/beam
! Clean residual mean=0.000017 rms=0.001426 Jy/beam
! Combined flux in latest and established models = 0.370395 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 16 components and 0.370395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174341Jy  sigma=0.001392
! Fit after  self-cal, rms=0.174336Jy  sigma=0.001392
! Inverting map 
! Your choice of large map pixels excluded 5.26% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.26% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.6282 mas, bmaj=1.368 mas, bpa=-7.201 degrees
! Estimated noise=266.845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579926 Jy
! Component: 100  -  total flux cleaned = 0.00685903 Jy
! Component: 150  -  total flux cleaned = 0.00716347 Jy
! Component: 200  -  total flux cleaned = 0.00744519 Jy
! Total flux subtracted in 200 components = 0.00744519 Jy
! Clean residual min=-0.004781 max=0.005304 Jy/beam
! Clean residual mean=-0.000024 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.37784 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.37784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173750Jy  sigma=0.001387
! Fit after  self-cal, rms=0.173731Jy  sigma=0.001387
! Inverting map 
! Your choice of large map pixels excluded 5.26% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     FT        1.00*    HH        2.38     
!   HN        1.12     KK        1.00*    KP        1.02     MC        1.00     
!   MK        1.00*    NL        0.98     NY        1.03     OV        0.97     
!   PT        0.99     SC        0.96     SH        1.00*    TS        1.00*    
!   WF        1.12     WZ        0.97     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    FT        1.00*    HH        1.00*    
!   HN        0.90     KK        1.00*    KP        1.00*    MC        1.00*    
!   MK        1.00*    NL        1.00     NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.14     SH        1.00*    TS        1.00*    
!   WF        0.92     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     FD        0.98     FT        1.00*    HH        1.00*    
!   HN        0.96     KK        1.00     KP        1.01     MC        1.00*    
!   MK        0.99     NL        0.98     NY        1.15     OV        0.96     
!   PT        0.97     SC        0.96     SH        1.00*    TS        1.00*    
!   WF        0.96     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.94     FD        1.07     FT        1.00*    HH        1.00*    
!   HN        1.00*    KK        0.94     KP        0.99     MC        1.00*    
!   MK        0.99     NL        1.19     NY        1.00*    OV        0.97     
!   PT        1.02     SC        1.00*    SH        0.92     TS        1.00     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     FT        1.00*    HH        2.34     
!   HN        1.24     KK        1.00*    KP        1.00     MC        1.00     
!   MK        1.00*    NL        1.02     NY        1.00     OV        1.02     
!   PT        1.00     SC        0.98     SH        1.00*    TS        1.00*    
!   WF        1.04     WZ        0.97     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    FT        1.00*    HH        1.00*    
!   HN        0.99     KK        1.00*    KP        1.00*    MC        1.00*    
!   MK        1.00*    NL        1.02     NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.13     SH        1.00*    TS        1.00*    
!   WF        0.95     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        0.94     FT        1.00*    HH        1.00*    
!   HN        0.98     KK        0.97     KP        1.00     MC        1.00*    
!   MK        0.97     NL        1.02     NY        1.10     OV        0.98     
!   PT        1.00     SC        0.98     SH        1.00*    TS        1.00*    
!   WF        0.94     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.99     FD        1.03     FT        1.00*    HH        1.00*    
!   HN        1.00*    KK        0.91     KP        0.95     MC        1.00*    
!   MK        0.97     NL        1.26     NY        1.00*    OV        1.02     
!   PT        1.04     SC        1.00*    SH        0.98     TS        1.05     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     FT        1.00*    HH        2.26     
!   HN        1.18     KK        1.00*    KP        1.01     MC        1.01     
!   MK        1.00*    NL        0.96     NY        1.05     OV        1.01     
!   PT        0.98     SC        0.98     SH        1.00*    TS        1.00*    
!   WF        1.07     WZ        0.96     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    FT        1.00*    HH        1.00*    
!   HN        0.90     KK        1.00*    KP        1.00*    MC        1.00*    
!   MK        1.00*    NL        1.00     NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.03     SH        1.00*    TS        1.00*    
!   WF        0.94     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.96     FD        0.98     FT        1.00*    HH        1.00*    
!   HN        0.98     KK        1.06     KP        0.99     MC        1.00*    
!   MK        0.96     NL        0.97     NY        1.07     OV        0.98     
!   PT        0.97     SC        0.98     SH        1.00*    TS        1.00*    
!   WF        1.01     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00     FD        1.06     FT        1.00*    HH        1.00*    
!   HN        1.00*    KK        0.98     KP        1.02     MC        1.00*    
!   MK        0.96     NL        1.26     NY        1.00*    OV        0.99     
!   PT        1.02     SC        1.00*    SH        0.96     TS        1.02     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     FT        1.00*    HH        2.00     
!   HN        1.27     KK        1.00*    KP        0.98     MC        0.96     
!   MK        1.00*    NL        1.01     NY        1.04     OV        1.04     
!   PT        0.99     SC        0.99     SH        1.00*    TS        1.00*    
!   WF        1.07     WZ        1.03     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    FT        1.00*    HH        1.00*    
!   HN        0.92     KK        1.00*    KP        1.00*    MC        1.00*    
!   MK        1.00*    NL        0.99     NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.21     SH        1.00*    TS        1.00*    
!   WF        1.01     WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        0.98     FT        1.00*    HH        1.00*    
!   HN        0.98     KK        1.05     KP        0.97     MC        1.00*    
!   MK        1.02     NL        1.00     NY        1.11     OV        1.01     
!   PT        0.98     SC        1.02     SH        1.00*    TS        1.00*    
!   WF        0.98     WZ        1.00*    
! 
!  A total of 21 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.02     FD        1.08     FT        1.00*    HH        1.00*    
!   HN        1.00*    KK        0.98     KP        0.98     MC        1.00*    
!   MK        1.00     NL        1.32     NY        1.00*    OV        1.06     
!   PT        1.01     SC        1.00*    SH        0.98     TS        1.10     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.173731Jy  sigma=0.001387
! Fit after  self-cal, rms=0.215107Jy  sigma=0.001361
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.63 mas, bmaj=1.494 mas, bpa=-8.417 degrees
! Estimated noise=270.481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181599 Jy
! Component: 100  -  total flux cleaned = 0.00207951 Jy
! Component: 150  -  total flux cleaned = 0.00219101 Jy
! Component: 200  -  total flux cleaned = 0.00228898 Jy
! Total flux subtracted in 200 components = 0.00228898 Jy
! Clean residual min=-0.001860 max=0.001852 Jy/beam
! Clean residual mean=0.000055 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.380129 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.380129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215047Jy  sigma=0.001360
! Fit after  self-cal, rms=0.215285Jy  sigma=0.001360
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215285Jy  sigma=0.001360
! Fit after  self-cal, rms=0.216251Jy  sigma=0.001359
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.6306 mas, bmaj=1.496 mas, bpa=-8.436 degrees
! Estimated noise=270.724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102633 Jy
! Component: 100  -  total flux cleaned = 0.00113013 Jy
! Component: 150  -  total flux cleaned = 0.00121937 Jy
! Component: 200  -  total flux cleaned = 0.00126068 Jy
! Total flux subtracted in 200 components = 0.00126068 Jy
! Clean residual min=-0.001719 max=0.001653 Jy/beam
! Clean residual mean=0.000048 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.38139 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.38139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216207Jy  sigma=0.001359
! Fit after  self-cal, rms=0.216205Jy  sigma=0.001359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247309 Jy
! Component: 100  -  total flux cleaned = 0.000288628 Jy
! Component: 150  -  total flux cleaned = 0.000327638 Jy
! Component: 200  -  total flux cleaned = 0.000329045 Jy
! Total flux subtracted in 200 components = 0.000329045 Jy
! Clean residual min=-0.001666 max=0.001639 Jy/beam
! Clean residual mean=0.000047 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.381719 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.381719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216171Jy  sigma=0.001359
! Fit after  self-cal, rms=0.216169Jy  sigma=0.001359
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216169Jy  sigma=0.001359
! Fit after  self-cal, rms=0.215870Jy  sigma=0.001358
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.631 mas, bmaj=1.497 mas, bpa=-8.426 degrees
! Estimated noise=270.704 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224679 Jy
! Component: 100  -  total flux cleaned = 0.00026719 Jy
! Component: 150  -  total flux cleaned = 0.000306257 Jy
! Component: 200  -  total flux cleaned = 0.000344081 Jy
! Total flux subtracted in 200 components = 0.000344081 Jy
! Clean residual min=-0.001684 max=0.001536 Jy/beam
! Clean residual mean=0.000041 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.382063 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 0.382063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215835Jy  sigma=0.001358
! Fit after  self-cal, rms=0.215837Jy  sigma=0.001358
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.74615e-05 Jy
! Component: 100  -  total flux cleaned = 8.92843e-05 Jy
! Component: 150  -  total flux cleaned = 0.00012529 Jy
! Component: 200  -  total flux cleaned = 0.00015948 Jy
! Total flux subtracted in 200 components = 0.00015948 Jy
! Clean residual min=-0.001639 max=0.001528 Jy/beam
! Clean residual mean=0.000041 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.382222 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 0.382222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215808Jy  sigma=0.001358
! Fit after  self-cal, rms=0.215809Jy  sigma=0.001358
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215809Jy  sigma=0.001358
! Fit after  self-cal, rms=0.215805Jy  sigma=0.001358
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=2.069 mas, bmaj=2.679 mas, bpa=-8.209 degrees
! Estimated noise=366.273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000236588 Jy
! Component: 100  -  total flux cleaned = -0.000308372 Jy
! Component: 150  -  total flux cleaned = -0.000324636 Jy
! Component: 200  -  total flux cleaned = -0.000326004 Jy
! Total flux subtracted in 200 components = -0.000326004 Jy
! Clean residual min=-0.001629 max=0.001773 Jy/beam
! Clean residual mean=0.000128 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.381896 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 63 components and 0.381896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215801Jy  sigma=0.001358
! Fit after  self-cal, rms=0.215793Jy  sigma=0.001358
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.36134e-05 Jy
! Component: 100  -  total flux cleaned = 3.35906e-05 Jy
! Component: 150  -  total flux cleaned = 1.50739e-06 Jy
! Component: 200  -  total flux cleaned = -1.69981e-05 Jy
! Total flux subtracted in 200 components = -1.69981e-05 Jy
! Clean residual min=-0.001612 max=0.001747 Jy/beam
! Clean residual mean=0.000128 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.381879 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.381879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215792Jy  sigma=0.001358
! Fit after  self-cal, rms=0.215791Jy  sigma=0.001358
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.6312 mas, bmaj=1.497 mas, bpa=-8.422 degrees
! Estimated noise=270.646 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6312 x 1.497 at -8.422 degrees (North through East)
! Clean map  min=-0.0012266  max=0.32552 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.5398 mas, bmaj=1.297 mas, bpa=-7.905 degrees
! Estimated noise=584.99 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.253359 Jy
! Component: 100  -  total flux cleaned = 0.31646 Jy
! Component: 150  -  total flux cleaned = 0.343551 Jy
! Component: 200  -  total flux cleaned = 0.357129 Jy
! Total flux subtracted in 200 components = 0.357129 Jy
! Clean residual min=-0.004953 max=0.007031 Jy/beam
! Clean residual mean=0.000016 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.357129 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.357129 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.6312 mas, bmaj=1.497 mas, bpa=-8.422 degrees
! Estimated noise=270.646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00965172 Jy
! Component: 100  -  total flux cleaned = 0.0153114 Jy
! Component: 150  -  total flux cleaned = 0.0191116 Jy
! Component: 200  -  total flux cleaned = 0.0218084 Jy
! Total flux subtracted in 200 components = 0.0218084 Jy
! Clean residual min=-0.002212 max=0.001991 Jy/beam
! Clean residual mean=0.000058 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.378937 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.378937 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! Estimated beam: bmin=0.6042 mas, bmaj=1.21 mas, bpa=-6.31 degrees
! Estimated noise=389.941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440053 Jy
! Component: 100  -  total flux cleaned = 0.000648228 Jy
! Component: 150  -  total flux cleaned = 0.000846714 Jy
! Component: 200  -  total flux cleaned = 0.000840379 Jy
! Total flux subtracted in 200 components = 0.000840379 Jy
! Clean residual min=-0.004135 max=0.003893 Jy/beam
! Clean residual mean=0.000117 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.379778 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174367 Jy
! Component: 100  -  total flux cleaned = 0.000342298 Jy
! Component: 150  -  total flux cleaned = 0.000344209 Jy
! Component: 200  -  total flux cleaned = 0.000667788 Jy
! Total flux subtracted in 200 components = 0.000667788 Jy
! Clean residual min=-0.003706 max=0.003507 Jy/beam
! Clean residual mean=0.000109 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.380446 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.380446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216387Jy  sigma=0.001359
! Fit after  self-cal, rms=0.216325Jy  sigma=0.001359
wmodel J2145+1115_X_2011_06_28_pus_map.mod
! Writing 38 model components to file: J2145+1115_X_2011_06_28_pus_map.mod
wobs J2145+1115_X_2011_06_28_pus_uvs.fits
! Writing UV FITS file: J2145+1115_X_2011_06_28_pus_uvs.fits
wwins J2145+1115_X_2011_06_28_pus_map.win
! wwins: Wrote 3 windows to J2145+1115_X_2011_06_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395806 Jy
! Component: 100  -  total flux cleaned = 0.000954186 Jy
! Component: 150  -  total flux cleaned = 0.00131286 Jy
! Component: 200  -  total flux cleaned = 0.00171975 Jy
! Component: 250  -  total flux cleaned = 0.00200443 Jy
! Component: 300  -  total flux cleaned = 0.00217101 Jy
! Component: 350  -  total flux cleaned = 0.00233517 Jy
! Component: 400  -  total flux cleaned = 0.00255042 Jy
! Component: 450  -  total flux cleaned = 0.00265597 Jy
! Component: 500  -  total flux cleaned = 0.00281365 Jy
! Component: 550  -  total flux cleaned = 0.002969 Jy
! Component: 600  -  total flux cleaned = 0.00312225 Jy
! Component: 650  -  total flux cleaned = 0.00327359 Jy
! Component: 700  -  total flux cleaned = 0.00337326 Jy
! Component: 750  -  total flux cleaned = 0.0036194 Jy
! Component: 800  -  total flux cleaned = 0.00371625 Jy
! Component: 850  -  total flux cleaned = 0.00386083 Jy
! Component: 900  -  total flux cleaned = 0.00400449 Jy
! Component: 950  -  total flux cleaned = 0.00409843 Jy
! Component: 1000  -  total flux cleaned = 0.00419211 Jy
! Component: 1050  -  total flux cleaned = 0.00432991 Jy
! Component: 1100  -  total flux cleaned = 0.00442079 Jy
! Component: 1150  -  total flux cleaned = 0.0045107 Jy
! Component: 1200  -  total flux cleaned = 0.00460037 Jy
! Component: 1250  -  total flux cleaned = 0.0047776 Jy
! Component: 1300  -  total flux cleaned = 0.00486569 Jy
! Component: 1350  -  total flux cleaned = 0.00490934 Jy
! Component: 1400  -  total flux cleaned = 0.00503902 Jy
! Component: 1450  -  total flux cleaned = 0.00512451 Jy
! Component: 1500  -  total flux cleaned = 0.00520926 Jy
! Component: 1550  -  total flux cleaned = 0.00529312 Jy
! Component: 1600  -  total flux cleaned = 0.00533476 Jy
! Component: 1650  -  total flux cleaned = 0.00550035 Jy
! Component: 1700  -  total flux cleaned = 0.0054187 Jy
! Component: 1750  -  total flux cleaned = 0.00558149 Jy
! Component: 1800  -  total flux cleaned = 0.00562218 Jy
! Component: 1850  -  total flux cleaned = 0.00566266 Jy
! Component: 1900  -  total flux cleaned = 0.00578206 Jy
! Component: 1950  -  total flux cleaned = 0.0057818 Jy
! Component: 2000  -  total flux cleaned = 0.00593835 Jy
! Total flux subtracted in 2048 components = 0.00593848 Jy
! Clean residual min=-0.002178 max=0.002343 Jy/beam
! Clean residual mean=0.000046 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.386384 Jy
keep
! Adding 137 model components to the UV plane model.
! The established model now contains 172 components and 0.386384 Jy
![Exited script file: muppet]
wmap "J2145+1115_X_2011_06_28_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6042 x 1.21 at -6.31 degrees (North through East)
! Clean map  min=-0.0026422  max=0.31356 Jy/beam
! Writing clean map to FITS file: J2145+1115_X_2011_06_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.313563 
invert
! Inverting map 
! Your choice of large map pixels excluded 5.24% of the data.
!  The x-axis pixel size should ideally be below 0.1635 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1882 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000675625 
device "J2145+1115_X_2011_06_28_pus\_map.eps/VPS"
! Attempting to open device: 'J2145+1115_X_2011_06_28_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.646401 0.646401 1.2928 2.5856 5.17121 10.3424 20.6848 41.3697 82.7393
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.313 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6042 x 1.21 at -6.31 degrees (North through East)
! Clean map  min=-0.0026422  max=0.31356 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2145+1115_X_2011_06_28_pus\_map.gif/vgif"
! Attempting to open device: 'J2145+1115_X_2011_06_28_pus_map.gif/vgif'
mapplot cln