! Started logfile: J2100+5612_S_2011_06_28_pus_uvs.log on Tue Apr 24 22:45:49 2012 obs J2100+5612_S_2011_06_28_pus_uva.fits ! Reading UV FITS file: J2100+5612_S_2011_06_28_pus_uva.fits ! AN table 1: 180 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.231954 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2100+5612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 4589 lines of history. ! ! Reading 25552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2100+5612_S_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1721 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1737 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1632 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1632 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970226Jy sigma=0.013190 ! Fit after self-cal, rms=0.931492Jy sigma=0.012700 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=3.056 mas, bpa=-14.52 degrees ! Estimated noise=729.217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054741 Jy ! Component: 100 - total flux cleaned = 0.0675318 Jy ! Total flux subtracted in 100 components = 0.0675318 Jy ! Clean residual min=-0.004525 max=0.005103 Jy/beam ! Clean residual mean=-0.000000 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.0675318 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0675318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095923Jy sigma=0.001237 ! Fit after self-cal, rms=0.095577Jy sigma=0.001232 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=3.759 mas, bpa=-19.67 degrees ! Estimated noise=338.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749894 Jy ! Component: 100 - total flux cleaned = 0.0109127 Jy ! Component: 150 - total flux cleaned = 0.0127242 Jy ! Component: 200 - total flux cleaned = 0.0137504 Jy ! Total flux subtracted in 200 components = 0.0137504 Jy ! Clean residual min=-0.002067 max=0.003179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0812821 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.0812821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095082Jy sigma=0.001223 ! Fit after self-cal, rms=0.095119Jy sigma=0.001223 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 FT 1.00* HH 1.00* ! HN 1.08 KK 1.00* KP 1.10 MC 1.00* ! MK 1.06 NL 1.00 NY 1.00* OV 1.14 ! PT 1.03 SC 1.10 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 FT 1.00* HH 1.00* ! HN 0.99 KK 1.00* KP 0.95 MC 1.00* ! MK 1.02 NL 0.93 NY 1.00* OV 1.03 ! PT 0.95 SC 1.01 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 FT 1.00* HH 1.00* ! HN 0.99 KK 1.00* KP 1.00 MC 1.00* ! MK 1.03 NL 1.02 NY 1.00* OV 1.00 ! PT 0.98 SC 0.94 SH 1.00* TS 1.03 ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 FT 1.00* HH 1.00* ! HN 1.17 KK 1.00* KP 0.96 MC 1.00* ! MK 1.02 NL 0.97 NY 1.00* OV 0.94 ! PT 0.96 SC 1.02 SH 1.00* TS 0.87 ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.095119Jy sigma=0.001223 ! Fit after self-cal, rms=0.096842Jy sigma=0.001220 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=3.788 mas, bpa=-15.18 degrees ! Estimated noise=338.298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675764 Jy ! Component: 100 - total flux cleaned = 0.000676513 Jy ! Component: 150 - total flux cleaned = 0.000696074 Jy ! Component: 200 - total flux cleaned = 0.000713731 Jy ! Total flux subtracted in 200 components = 0.000713731 Jy ! Clean residual min=-0.002029 max=0.002753 Jy/beam ! Clean residual mean=0.000008 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0819959 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 28 components and 0.0819959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096832Jy sigma=0.001220 ! Fit after self-cal, rms=0.096939Jy sigma=0.001219 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096939Jy sigma=0.001219 ! Fit after self-cal, rms=0.099148Jy sigma=0.001216 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=3.773 mas, bpa=-15.04 degrees ! Estimated noise=339.133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593105 Jy ! Component: 100 - total flux cleaned = 0.000611081 Jy ! Component: 150 - total flux cleaned = 0.000627121 Jy ! Component: 200 - total flux cleaned = 0.000626054 Jy ! Total flux subtracted in 200 components = 0.000626054 Jy ! Clean residual min=-0.001660 max=0.002604 Jy/beam ! Clean residual mean=0.000008 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0826219 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.0826219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099140Jy sigma=0.001216 ! Fit after self-cal, rms=0.099246Jy sigma=0.001216 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-63, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200828 Jy ! Component: 100 - total flux cleaned = 0.00232934 Jy ! Component: 150 - total flux cleaned = 0.00259754 Jy ! Component: 200 - total flux cleaned = 0.00277442 Jy ! Total flux subtracted in 200 components = 0.00277442 Jy ! Clean residual min=-0.001660 max=0.001961 Jy/beam ! Clean residual mean=0.000002 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0853964 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0853964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099196Jy sigma=0.001215 ! Fit after self-cal, rms=0.099164Jy sigma=0.001215 ! Inverting map ! Added new window around map position (21.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172867 Jy ! Component: 100 - total flux cleaned = 0.00201124 Jy ! Component: 150 - total flux cleaned = 0.0022344 Jy ! Component: 200 - total flux cleaned = 0.00237166 Jy ! Total flux subtracted in 200 components = 0.00237166 Jy ! Clean residual min=-0.001516 max=0.001706 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.087768 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.087768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099121Jy sigma=0.001215 ! Fit after self-cal, rms=0.099106Jy sigma=0.001214 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099106Jy sigma=0.001214 ! Fit after self-cal, rms=0.099838Jy sigma=0.001214 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=3.767 mas, bpa=-14 degrees ! Estimated noise=338.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748206 Jy ! Component: 100 - total flux cleaned = 0.000928011 Jy ! Component: 150 - total flux cleaned = 0.00103075 Jy ! Component: 200 - total flux cleaned = 0.00114624 Jy ! Total flux subtracted in 200 components = 0.00114624 Jy ! Clean residual min=-0.001461 max=0.001718 Jy/beam ! Clean residual mean=0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0889142 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 69 components and 0.0889142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099819Jy sigma=0.001214 ! Fit after self-cal, rms=0.099854Jy sigma=0.001214 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273122 Jy ! Component: 100 - total flux cleaned = 0.000339229 Jy ! Component: 150 - total flux cleaned = 0.000418938 Jy ! Component: 200 - total flux cleaned = 0.000456121 Jy ! Total flux subtracted in 200 components = 0.000456121 Jy ! Clean residual min=-0.001458 max=0.001723 Jy/beam ! Clean residual mean=0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0893704 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.0893704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099844Jy sigma=0.001214 ! Fit after self-cal, rms=0.099844Jy sigma=0.001214 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099844Jy sigma=0.001214 ! Fit after self-cal, rms=0.100099Jy sigma=0.001214 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.058 mas, bmaj=8.997 mas, bpa=79.9 degrees ! Estimated noise=418.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668379 Jy ! Component: 100 - total flux cleaned = 0.000852889 Jy ! Component: 150 - total flux cleaned = 0.000986415 Jy ! Component: 200 - total flux cleaned = 0.00107293 Jy ! Total flux subtracted in 200 components = 0.00107293 Jy ! Clean residual min=-0.001294 max=0.001687 Jy/beam ! Clean residual mean=0.000008 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0904433 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.0904433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100096Jy sigma=0.001214 ! Fit after self-cal, rms=0.100093Jy sigma=0.001214 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297976 Jy ! Component: 100 - total flux cleaned = 0.000340957 Jy ! Component: 150 - total flux cleaned = 0.000366661 Jy ! Component: 200 - total flux cleaned = 0.000401067 Jy ! Total flux subtracted in 200 components = 0.000401067 Jy ! Clean residual min=-0.001249 max=0.001694 Jy/beam ! Clean residual mean=0.000008 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0908444 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.0908444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100094Jy sigma=0.001214 ! Fit after self-cal, rms=0.100093Jy sigma=0.001214 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=3.764 mas, bpa=-13.63 degrees ! Estimated noise=339.344 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 3.764 at -13.63 degrees (North through East) ! Clean map min=-0.0014635 max=0.072801 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=3.077 mas, bpa=-11.8 degrees ! Estimated noise=728.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547034 Jy ! Component: 100 - total flux cleaned = 0.0686935 Jy ! Component: 150 - total flux cleaned = 0.0750998 Jy ! Component: 200 - total flux cleaned = 0.0789967 Jy ! Total flux subtracted in 200 components = 0.0789967 Jy ! Clean residual min=-0.003738 max=0.003414 Jy/beam ! Clean residual mean=0.000000 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0789967 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0789967 Jy ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=3.764 mas, bpa=-13.63 degrees ! Estimated noise=339.344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365235 Jy ! Component: 100 - total flux cleaned = 0.00594018 Jy ! Component: 150 - total flux cleaned = 0.00695532 Jy ! Component: 200 - total flux cleaned = 0.00762448 Jy ! Total flux subtracted in 200 components = 0.00762448 Jy ! Clean residual min=-0.001691 max=0.001854 Jy/beam ! Clean residual mean=-0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0866212 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.0866212 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=3.55 mas, bpa=-16.45 degrees ! Estimated noise=372.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244999 Jy ! Component: 100 - total flux cleaned = 0.000609439 Jy ! Component: 150 - total flux cleaned = 0.000925835 Jy ! Component: 200 - total flux cleaned = 0.00120602 Jy ! Total flux subtracted in 200 components = 0.00120602 Jy ! Clean residual min=-0.001853 max=0.001888 Jy/beam ! Clean residual mean=0.000004 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0878272 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175195 Jy ! Component: 100 - total flux cleaned = 0.000332876 Jy ! Component: 150 - total flux cleaned = 0.000503493 Jy ! Component: 200 - total flux cleaned = 0.000658464 Jy ! Total flux subtracted in 200 components = 0.000658464 Jy ! Clean residual min=-0.001769 max=0.001809 Jy/beam ! Clean residual mean=0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0884857 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 57 components and 0.0884857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100095Jy sigma=0.001214 ! Fit after self-cal, rms=0.100089Jy sigma=0.001214 wmodel J2100+5612_S_2011_06_28_pus_map.mod ! Writing 57 model components to file: J2100+5612_S_2011_06_28_pus_map.mod wobs J2100+5612_S_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J2100+5612_S_2011_06_28_pus_uvs.fits wwins J2100+5612_S_2011_06_28_pus_map.win ! wwins: Wrote 3 windows to J2100+5612_S_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050717 Jy ! Component: 100 - total flux cleaned = 0.000632396 Jy ! Component: 150 - total flux cleaned = 0.000691423 Jy ! Component: 200 - total flux cleaned = 0.000664326 Jy ! Component: 250 - total flux cleaned = 0.000746025 Jy ! Component: 300 - total flux cleaned = 0.000875685 Jy ! Component: 350 - total flux cleaned = 0.00107642 Jy ! Component: 400 - total flux cleaned = 0.00122302 Jy ! Component: 450 - total flux cleaned = 0.00134211 Jy ! Component: 500 - total flux cleaned = 0.00155104 Jy ! Component: 550 - total flux cleaned = 0.00166401 Jy ! Component: 600 - total flux cleaned = 0.00186314 Jy ! Component: 650 - total flux cleaned = 0.00192753 Jy ! Component: 700 - total flux cleaned = 0.0019911 Jy ! Component: 750 - total flux cleaned = 0.00203273 Jy ! Component: 800 - total flux cleaned = 0.00211444 Jy ! Component: 850 - total flux cleaned = 0.00211459 Jy ! Component: 900 - total flux cleaned = 0.0022527 Jy ! Component: 950 - total flux cleaned = 0.00221401 Jy ! Component: 1000 - total flux cleaned = 0.00234776 Jy ! Component: 1050 - total flux cleaned = 0.0023854 Jy ! Component: 1100 - total flux cleaned = 0.00245912 Jy ! Component: 1150 - total flux cleaned = 0.00249587 Jy ! Component: 1200 - total flux cleaned = 0.00251393 Jy ! Component: 1250 - total flux cleaned = 0.00253185 Jy ! Component: 1300 - total flux cleaned = 0.00254917 Jy ! Component: 1350 - total flux cleaned = 0.00256634 Jy ! Component: 1400 - total flux cleaned = 0.0026171 Jy ! Component: 1450 - total flux cleaned = 0.00263367 Jy ! Component: 1500 - total flux cleaned = 0.00265002 Jy ! Component: 1550 - total flux cleaned = 0.00268246 Jy ! Component: 1600 - total flux cleaned = 0.00266645 Jy ! Component: 1650 - total flux cleaned = 0.00268263 Jy ! Component: 1700 - total flux cleaned = 0.00271377 Jy ! Component: 1750 - total flux cleaned = 0.00269832 Jy ! Component: 1800 - total flux cleaned = 0.00272909 Jy ! Component: 1850 - total flux cleaned = 0.00265345 Jy ! Component: 1900 - total flux cleaned = 0.00265369 Jy ! Component: 1950 - total flux cleaned = 0.00268335 Jy ! Component: 2000 - total flux cleaned = 0.00263906 Jy ! Total flux subtracted in 2048 components = 0.00263909 Jy ! Clean residual min=-0.000951 max=0.000767 Jy/beam ! Clean residual mean=-0.000003 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.0911248 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 210 components and 0.0911248 Jy ![Exited script file: muppet] wmap "J2100+5612_S_2011_06_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.323 x 3.55 at -16.45 degrees (North through East) ! Clean map min=-0.0013836 max=0.072988 Jy/beam ! Writing clean map to FITS file: J2100+5612_S_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0729877 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000279859 device "J2100+5612_S_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J2100+5612_S_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1503 1.1503 2.3006 4.6012 9.2024 18.4048 36.8096 73.6192 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.323 x 3.55 at -16.45 degrees (North through East) ! Clean map min=-0.0013836 max=0.072988 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2100+5612_S_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J2100+5612_S_2011_06_28_pus_map.gif/vgif' mapplot cln