! Started logfile: J2018-0509_S_2011_06_28_pus_uvs.log on Tue Apr 24 22:45:42 2012 obs J2018-0509_S_2011_06_28_pus_uva.fits ! Reading UV FITS file: J2018-0509_S_2011_06_28_pus_uva.fits ! AN table 1: 180 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.230102 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2018-0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 4589 lines of history. ! ! Reading 25348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2018-0509_S_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1639 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1639 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1639 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1639 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925982Jy sigma=0.012273 ! Fit after self-cal, rms=0.914343Jy sigma=0.012140 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=6.448 mas, bpa=-2.293 degrees ! Estimated noise=643.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0701826 Jy ! Component: 100 - total flux cleaned = 0.0855043 Jy ! Total flux subtracted in 100 components = 0.0855043 Jy ! Clean residual min=-0.004589 max=0.004623 Jy/beam ! Clean residual mean=0.000011 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.0855043 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0855043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104089Jy sigma=0.001275 ! Fit after self-cal, rms=0.104044Jy sigma=0.001275 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=7.451 mas, bpa=-2.916 degrees ! Estimated noise=338.996 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053808 Jy ! Component: 100 - total flux cleaned = 0.00613204 Jy ! Component: 150 - total flux cleaned = 0.00593754 Jy ! Component: 200 - total flux cleaned = 0.00588964 Jy ! Total flux subtracted in 200 components = 0.00588964 Jy ! Clean residual min=-0.002182 max=0.002120 Jy/beam ! Clean residual mean=0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.091394 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.091394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103749Jy sigma=0.001272 ! Fit after self-cal, rms=0.103759Jy sigma=0.001272 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 FT 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 1.01 MC 1.00* ! MK 0.80 NL 0.94 NY 1.00* OV 0.97 ! PT 1.02 SC 1.00 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 FT 1.00* HH 1.00* ! HN 1.00 KK 1.00* KP 1.01 MC 1.00* ! MK 1.01 NL 0.94 NY 1.00* OV 1.03 ! PT 0.99 SC 0.99 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 FT 1.00* HH 1.00* ! HN 1.05 KK 1.00* KP 1.00 MC 1.00* ! MK 1.00 NL 1.02 NY 1.00* OV 1.00 ! PT 1.04 SC 1.01 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 FT 1.00* HH 1.00* ! HN 0.95 KK 1.00* KP 1.04 MC 1.00* ! MK 1.10 NL 1.02 NY 1.00* OV 0.98 ! PT 1.02 SC 0.99 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.103759Jy sigma=0.001272 ! Fit after self-cal, rms=0.101177Jy sigma=0.001269 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=7.422 mas, bpa=-3.149 degrees ! Estimated noise=337.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463206 Jy ! Component: 100 - total flux cleaned = 0.000463144 Jy ! Component: 150 - total flux cleaned = 0.000462882 Jy ! Component: 200 - total flux cleaned = 0.000395058 Jy ! Total flux subtracted in 200 components = 0.000395058 Jy ! Clean residual min=-0.001916 max=0.001860 Jy/beam ! Clean residual mean=0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.091789 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.091789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101160Jy sigma=0.001269 ! Fit after self-cal, rms=0.101154Jy sigma=0.001269 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101154Jy sigma=0.001269 ! Fit after self-cal, rms=0.099785Jy sigma=0.001266 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=7.391 mas, bpa=-3.387 degrees ! Estimated noise=337.763 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349588 Jy ! Component: 100 - total flux cleaned = 0.000337932 Jy ! Component: 150 - total flux cleaned = 0.000318999 Jy ! Component: 200 - total flux cleaned = 0.000301892 Jy ! Total flux subtracted in 200 components = 0.000301892 Jy ! Clean residual min=-0.001634 max=0.001786 Jy/beam ! Clean residual mean=0.000003 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0920909 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0920909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099782Jy sigma=0.001266 ! Fit after self-cal, rms=0.099808Jy sigma=0.001266 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.37634e-05 Jy ! Component: 100 - total flux cleaned = -0.000159239 Jy ! Component: 150 - total flux cleaned = -0.000203897 Jy ! Component: 200 - total flux cleaned = -0.000236452 Jy ! Total flux subtracted in 200 components = -0.000236452 Jy ! Clean residual min=-0.001626 max=0.001814 Jy/beam ! Clean residual mean=0.000003 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0918545 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0918545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099806Jy sigma=0.001266 ! Fit after self-cal, rms=0.099806Jy sigma=0.001266 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099806Jy sigma=0.001266 ! Fit after self-cal, rms=0.099562Jy sigma=0.001266 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=7.375 mas, bpa=-3.382 degrees ! Estimated noise=337.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331864 Jy ! Component: 100 - total flux cleaned = 0.000350191 Jy ! Component: 150 - total flux cleaned = 0.000350122 Jy ! Component: 200 - total flux cleaned = 0.000357476 Jy ! Total flux subtracted in 200 components = 0.000357476 Jy ! Clean residual min=-0.001589 max=0.001764 Jy/beam ! Clean residual mean=0.000004 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0922119 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0922119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099559Jy sigma=0.001266 ! Fit after self-cal, rms=0.099574Jy sigma=0.001265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.05778e-05 Jy ! Component: 100 - total flux cleaned = -4.3401e-05 Jy ! Component: 150 - total flux cleaned = -6.41448e-05 Jy ! Component: 200 - total flux cleaned = -7.7212e-05 Jy ! Total flux subtracted in 200 components = -7.7212e-05 Jy ! Clean residual min=-0.001582 max=0.001768 Jy/beam ! Clean residual mean=0.000004 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0921347 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0921347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099573Jy sigma=0.001265 ! Fit after self-cal, rms=0.099574Jy sigma=0.001265 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099574Jy sigma=0.001265 ! Fit after self-cal, rms=0.099459Jy sigma=0.001265 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.077 mas, bmaj=11.55 mas, bpa=-1.784 degrees ! Estimated noise=418.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612973 Jy ! Component: 100 - total flux cleaned = 0.000849936 Jy ! Component: 150 - total flux cleaned = 0.000878047 Jy ! Component: 200 - total flux cleaned = 0.000897914 Jy ! Total flux subtracted in 200 components = 0.000897914 Jy ! Clean residual min=-0.001406 max=0.001583 Jy/beam ! Clean residual mean=0.000008 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0930326 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.0930326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099460Jy sigma=0.001265 ! Fit after self-cal, rms=0.099462Jy sigma=0.001265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120249 Jy ! Component: 100 - total flux cleaned = 0.000133551 Jy ! Component: 150 - total flux cleaned = 0.000145404 Jy ! Component: 200 - total flux cleaned = 0.00015647 Jy ! Total flux subtracted in 200 components = 0.00015647 Jy ! Clean residual min=-0.001402 max=0.001588 Jy/beam ! Clean residual mean=0.000008 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0931891 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 56 components and 0.0931891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099463Jy sigma=0.001265 ! Fit after self-cal, rms=0.099464Jy sigma=0.001265 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=7.364 mas, bpa=-3.36 degrees ! Estimated noise=337.595 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 7.364 at -3.36 degrees (North through East) ! Clean map min=-0.0015002 max=0.090667 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=6.392 mas, bpa=-2.975 degrees ! Estimated noise=631.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0688657 Jy ! Component: 100 - total flux cleaned = 0.0839873 Jy ! Component: 150 - total flux cleaned = 0.0882381 Jy ! Component: 200 - total flux cleaned = 0.0886485 Jy ! Total flux subtracted in 200 components = 0.0886485 Jy ! Clean residual min=-0.003876 max=0.002955 Jy/beam ! Clean residual mean=0.000010 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0886484 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0886484 Jy ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=7.364 mas, bpa=-3.36 degrees ! Estimated noise=337.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313444 Jy ! Component: 100 - total flux cleaned = 0.00394698 Jy ! Component: 150 - total flux cleaned = 0.00404755 Jy ! Component: 200 - total flux cleaned = 0.00402149 Jy ! Total flux subtracted in 200 components = 0.00402149 Jy ! Clean residual min=-0.001672 max=0.001769 Jy/beam ! Clean residual mean=0.000004 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0926699 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.0926699 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.012 mas, bpa=-2.389 degrees ! Estimated noise=352.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130193 Jy ! Component: 100 - total flux cleaned = 0.000129305 Jy ! Component: 150 - total flux cleaned = 0.0001114 Jy ! Component: 200 - total flux cleaned = 5.99819e-05 Jy ! Total flux subtracted in 200 components = 5.99819e-05 Jy ! Clean residual min=-0.001661 max=0.001861 Jy/beam ! Clean residual mean=0.000004 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0927299 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.44959e-05 Jy ! Component: 100 - total flux cleaned = -8.39282e-05 Jy ! Component: 150 - total flux cleaned = -0.000107505 Jy ! Component: 200 - total flux cleaned = -0.000128982 Jy ! Total flux subtracted in 200 components = -0.000128982 Jy ! Clean residual min=-0.001643 max=0.001856 Jy/beam ! Clean residual mean=0.000004 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0926009 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0926009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099465Jy sigma=0.001266 ! Fit after self-cal, rms=0.099467Jy sigma=0.001266 wmodel J2018-0509_S_2011_06_28_pus_map.mod ! Writing 32 model components to file: J2018-0509_S_2011_06_28_pus_map.mod wobs J2018-0509_S_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J2018-0509_S_2011_06_28_pus_uvs.fits wwins J2018-0509_S_2011_06_28_pus_map.win ! wwins: Wrote 1 windows to J2018-0509_S_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244776 Jy ! Component: 100 - total flux cleaned = 0.000189038 Jy ! Component: 150 - total flux cleaned = 8.63909e-05 Jy ! Component: 200 - total flux cleaned = -1.28188e-05 Jy ! Component: 250 - total flux cleaned = -0.000108154 Jy ! Component: 300 - total flux cleaned = -0.000154407 Jy ! Component: 350 - total flux cleaned = -0.000199722 Jy ! Component: 400 - total flux cleaned = -0.000221949 Jy ! Component: 450 - total flux cleaned = -0.000222199 Jy ! Component: 500 - total flux cleaned = -0.000243477 Jy ! Component: 550 - total flux cleaned = -0.000223075 Jy ! Component: 600 - total flux cleaned = -0.000183002 Jy ! Component: 650 - total flux cleaned = -0.000124578 Jy ! Component: 700 - total flux cleaned = -8.65775e-05 Jy ! Component: 750 - total flux cleaned = -3.03418e-05 Jy ! Component: 800 - total flux cleaned = -4.82247e-05 Jy ! Component: 850 - total flux cleaned = 6.02931e-05 Jy ! Component: 900 - total flux cleaned = 7.79448e-05 Jy ! Component: 950 - total flux cleaned = 0.000147381 Jy ! Component: 1000 - total flux cleaned = 0.000113281 Jy ! Component: 1050 - total flux cleaned = 0.000164207 Jy ! Component: 1100 - total flux cleaned = 0.000180814 Jy ! Component: 1150 - total flux cleaned = 0.000213215 Jy ! Component: 1200 - total flux cleaned = 0.000245397 Jy ! Component: 1250 - total flux cleaned = 0.000277054 Jy ! Component: 1300 - total flux cleaned = 0.000324067 Jy ! Component: 1350 - total flux cleaned = 0.000339625 Jy ! Component: 1400 - total flux cleaned = 0.000324757 Jy ! Component: 1450 - total flux cleaned = 0.00035478 Jy ! Component: 1500 - total flux cleaned = 0.000398992 Jy ! Component: 1550 - total flux cleaned = 0.000413674 Jy ! Component: 1600 - total flux cleaned = 0.000399323 Jy ! Component: 1650 - total flux cleaned = 0.000441864 Jy ! Component: 1700 - total flux cleaned = 0.000442029 Jy ! Component: 1750 - total flux cleaned = 0.000442153 Jy ! Component: 1800 - total flux cleaned = 0.00045562 Jy ! Component: 1850 - total flux cleaned = 0.000442212 Jy ! Component: 1900 - total flux cleaned = 0.000455145 Jy ! Component: 1950 - total flux cleaned = 0.000454974 Jy ! Component: 2000 - total flux cleaned = 0.000416242 Jy ! Total flux subtracted in 2048 components = 0.000442166 Jy ! Clean residual min=-0.000747 max=0.000796 Jy/beam ! Clean residual mean=0.000003 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0930431 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 172 components and 0.0930431 Jy ![Exited script file: muppet] wmap "J2018-0509_S_2011_06_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.012 at -2.389 degrees (North through East) ! Clean map min=-0.0012018 max=0.090373 Jy/beam ! Writing clean map to FITS file: J2018-0509_S_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0903732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255408 device "J2018-0509_S_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J2018-0509_S_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.847843 0.847843 1.69569 3.39137 6.78274 13.5655 27.131 54.2619 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.09 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.012 at -2.389 degrees (North through East) ! Clean map min=-0.0012018 max=0.090373 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2018-0509_S_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J2018-0509_S_2011_06_28_pus_map.gif/vgif' mapplot cln