! Started logfile: J1629-1720_X_2011_06_28_pus_uvs.log on Sat Apr 21 13:06:08 2012
obs J1629-1720_X_2011_06_28_pus_uva.fits
! Reading UV FITS file: J1629-1720_X_2011_06_28_pus_uva.fits
! AN table 1: 181 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.227892 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1629-1720
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 5249 lines of history.
! 
! Reading 25244 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1629-1720_X_2011_06_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1662 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1662 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1662 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1662 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.917388Jy  sigma=0.010764
! Fit after  self-cal, rms=0.885267Jy  sigma=0.010491
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6429 mas, bmaj=1.633 mas, bpa=-5.565 degrees
! Estimated noise=686.67 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0961231 Jy
! Component: 100  -  total flux cleaned = 0.117204 Jy
! Total flux subtracted in 100 components = 0.117204 Jy
! Clean residual min=-0.005092 max=0.006267 Jy/beam
! Clean residual mean=0.000005 rms=0.001294 Jy/beam
! Combined flux in latest and established models = 0.117204 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.117204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128710Jy  sigma=0.001347
! Fit after  self-cal, rms=0.128690Jy  sigma=0.001347
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8193 mas, bmaj=1.986 mas, bpa=-4.513 degrees
! Estimated noise=383.9 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818223 Jy
! Component: 100  -  total flux cleaned = 0.011883 Jy
! Component: 150  -  total flux cleaned = 0.01385 Jy
! Component: 200  -  total flux cleaned = 0.0149848 Jy
! Total flux subtracted in 200 components = 0.0149848 Jy
! Clean residual min=-0.002770 max=0.003707 Jy/beam
! Clean residual mean=-0.000004 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.132189 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 20 components and 0.132189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128299Jy  sigma=0.001339
! Fit after  self-cal, rms=0.128337Jy  sigma=0.001339
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     FT        1.00*    HH        1.00*    
!   HN        1.02     KK        1.00*    KP        1.01     MC        1.00*    
!   MK        1.03     NL        1.02     NY        1.00*    OV        0.96     
!   PT        0.98     SC        0.97     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     FT        1.00*    HH        1.00*    
!   HN        1.02     KK        1.00*    KP        0.98     MC        1.00*    
!   MK        1.04     NL        1.05     NY        1.00*    OV        1.00     
!   PT        1.01     SC        1.01     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     FT        1.00*    HH        1.00*    
!   HN        1.01     KK        1.00*    KP        1.01     MC        1.00*    
!   MK        0.97     NL        0.99     NY        1.00*    OV        0.97     
!   PT        0.95     SC        1.03     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     FT        1.00*    HH        1.00*    
!   HN        1.04     KK        1.00*    KP        0.93     MC        1.00*    
!   MK        0.99     NL        1.02     NY        1.00*    OV        1.02     
!   PT        0.97     SC        0.99     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.128337Jy  sigma=0.001339
! Fit after  self-cal, rms=0.128799Jy  sigma=0.001338
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8223 mas, bmaj=1.992 mas, bpa=-4.415 degrees
! Estimated noise=382.101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13, 21.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273957 Jy
! Component: 100  -  total flux cleaned = 0.00313718 Jy
! Component: 150  -  total flux cleaned = 0.00336382 Jy
! Component: 200  -  total flux cleaned = 0.00340207 Jy
! Total flux subtracted in 200 components = 0.00340207 Jy
! Clean residual min=-0.002305 max=0.002388 Jy/beam
! Clean residual mean=-0.000007 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.135591 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 34 components and 0.135591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128721Jy  sigma=0.001337
! Fit after  self-cal, rms=0.128747Jy  sigma=0.001337
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128747Jy  sigma=0.001337
! Fit after  self-cal, rms=0.132109Jy  sigma=0.001336
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8215 mas, bmaj=1.995 mas, bpa=-4.475 degrees
! Estimated noise=382.986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000708625 Jy
! Component: 100  -  total flux cleaned = 0.000857805 Jy
! Component: 150  -  total flux cleaned = 0.000891135 Jy
! Component: 200  -  total flux cleaned = 0.000951017 Jy
! Total flux subtracted in 200 components = 0.000951017 Jy
! Clean residual min=-0.002359 max=0.002011 Jy/beam
! Clean residual mean=-0.000004 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.136542 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.136542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132084Jy  sigma=0.001335
! Fit after  self-cal, rms=0.132131Jy  sigma=0.001335
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224992 Jy
! Component: 100  -  total flux cleaned = 0.000278223 Jy
! Component: 150  -  total flux cleaned = 0.000277417 Jy
! Component: 200  -  total flux cleaned = 0.000300207 Jy
! Total flux subtracted in 200 components = 0.000300207 Jy
! Clean residual min=-0.002313 max=0.001985 Jy/beam
! Clean residual mean=-0.000004 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.136842 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 48 components and 0.136842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132119Jy  sigma=0.001335
! Fit after  self-cal, rms=0.132115Jy  sigma=0.001335
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132115Jy  sigma=0.001335
! Fit after  self-cal, rms=0.132742Jy  sigma=0.001335
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8216 mas, bmaj=1.996 mas, bpa=-4.492 degrees
! Estimated noise=383.78 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351258 Jy
! Component: 100  -  total flux cleaned = 0.000397735 Jy
! Component: 150  -  total flux cleaned = 0.000398011 Jy
! Component: 200  -  total flux cleaned = 0.000438654 Jy
! Total flux subtracted in 200 components = 0.000438654 Jy
! Clean residual min=-0.002312 max=0.002001 Jy/beam
! Clean residual mean=-0.000003 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.137281 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.137281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132733Jy  sigma=0.001335
! Fit after  self-cal, rms=0.132736Jy  sigma=0.001335
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108776 Jy
! Component: 100  -  total flux cleaned = 0.000109119 Jy
! Component: 150  -  total flux cleaned = 0.000109576 Jy
! Component: 200  -  total flux cleaned = 0.000127107 Jy
! Total flux subtracted in 200 components = 0.000127107 Jy
! Clean residual min=-0.002288 max=0.002000 Jy/beam
! Clean residual mean=-0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.137408 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 62 components and 0.137408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132731Jy  sigma=0.001335
! Fit after  self-cal, rms=0.132727Jy  sigma=0.001335
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132727Jy  sigma=0.001335
! Fit after  self-cal, rms=0.133010Jy  sigma=0.001335
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.076 mas, bmaj=4.003 mas, bpa=2.623 degrees
! Estimated noise=484.169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.57631e-05 Jy
! Component: 100  -  total flux cleaned = 3.56565e-05 Jy
! Component: 150  -  total flux cleaned = 5.35398e-05 Jy
! Component: 200  -  total flux cleaned = 5.30857e-05 Jy
! Total flux subtracted in 200 components = 5.30857e-05 Jy
! Clean residual min=-0.002787 max=0.002352 Jy/beam
! Clean residual mean=-0.000004 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.137461 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.137461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133009Jy  sigma=0.001335
! Fit after  self-cal, rms=0.133009Jy  sigma=0.001335
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.45843e-05 Jy
! Component: 100  -  total flux cleaned = -5.53339e-05 Jy
! Component: 150  -  total flux cleaned = -5.56386e-05 Jy
! Component: 200  -  total flux cleaned = -4.1871e-05 Jy
! Total flux subtracted in 200 components = -4.1871e-05 Jy
! Clean residual min=-0.002741 max=0.002355 Jy/beam
! Clean residual mean=-0.000004 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.137419 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 71 components and 0.137419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133011Jy  sigma=0.001335
! Fit after  self-cal, rms=0.133009Jy  sigma=0.001335
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8215 mas, bmaj=1.996 mas, bpa=-4.52 degrees
! Estimated noise=384.174 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8215 x 1.996 at -4.52 degrees (North through East)
! Clean map  min=-0.0021154  max=0.12291 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6444 mas, bmaj=1.642 mas, bpa=-5.541 degrees
! Estimated noise=688.694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0961063 Jy
! Component: 100  -  total flux cleaned = 0.117422 Jy
! Component: 150  -  total flux cleaned = 0.124132 Jy
! Component: 200  -  total flux cleaned = 0.128509 Jy
! Total flux subtracted in 200 components = 0.128509 Jy
! Clean residual min=-0.004412 max=0.004416 Jy/beam
! Clean residual mean=-0.000001 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.128509 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.128509 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8215 mas, bmaj=1.996 mas, bpa=-4.52 degrees
! Estimated noise=384.174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431456 Jy
! Component: 100  -  total flux cleaned = 0.00653595 Jy
! Component: 150  -  total flux cleaned = 0.00731255 Jy
! Component: 200  -  total flux cleaned = 0.00779702 Jy
! Total flux subtracted in 200 components = 0.00779702 Jy
! Clean residual min=-0.002462 max=0.002134 Jy/beam
! Clean residual mean=-0.000004 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.136306 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.136306 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7873 mas, bmaj=1.871 mas, bpa=-2.024 degrees
! Estimated noise=445.122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272245 Jy
! Component: 100  -  total flux cleaned = 0.000329983 Jy
! Component: 150  -  total flux cleaned = 0.000333378 Jy
! Component: 200  -  total flux cleaned = 0.000377457 Jy
! Total flux subtracted in 200 components = 0.000377457 Jy
! Clean residual min=-0.002335 max=0.002604 Jy/beam
! Clean residual mean=-0.000004 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.136684 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.73643e-07 Jy
! Component: 100  -  total flux cleaned = 3.53753e-05 Jy
! Component: 150  -  total flux cleaned = 6.80205e-05 Jy
! Component: 200  -  total flux cleaned = 9.85972e-05 Jy
! Total flux subtracted in 200 components = 9.85972e-05 Jy
! Clean residual min=-0.002324 max=0.002558 Jy/beam
! Clean residual mean=-0.000004 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.136782 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 51 components and 0.136782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133013Jy  sigma=0.001335
! Fit after  self-cal, rms=0.132992Jy  sigma=0.001335
wmodel J1629-1720_X_2011_06_28_pus_map.mod
! Writing 51 model components to file: J1629-1720_X_2011_06_28_pus_map.mod
wobs J1629-1720_X_2011_06_28_pus_uvs.fits
! Writing UV FITS file: J1629-1720_X_2011_06_28_pus_uvs.fits
wwins J1629-1720_X_2011_06_28_pus_map.win
! wwins: Wrote 2 windows to J1629-1720_X_2011_06_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346077 Jy
! Component: 100  -  total flux cleaned = 0.000658866 Jy
! Component: 150  -  total flux cleaned = 0.000875882 Jy
! Component: 200  -  total flux cleaned = 0.000841385 Jy
! Component: 250  -  total flux cleaned = 0.000708139 Jy
! Component: 300  -  total flux cleaned = 0.000740248 Jy
! Component: 350  -  total flux cleaned = 0.000676861 Jy
! Component: 400  -  total flux cleaned = 0.000646581 Jy
! Component: 450  -  total flux cleaned = 0.000646412 Jy
! Component: 500  -  total flux cleaned = 0.000559694 Jy
! Component: 550  -  total flux cleaned = 0.00050361 Jy
! Component: 600  -  total flux cleaned = 0.000503439 Jy
! Component: 650  -  total flux cleaned = 0.000393805 Jy
! Component: 700  -  total flux cleaned = 0.000340739 Jy
! Component: 750  -  total flux cleaned = 0.000366989 Jy
! Component: 800  -  total flux cleaned = 0.000316186 Jy
! Component: 850  -  total flux cleaned = 0.000391411 Jy
! Component: 900  -  total flux cleaned = 0.00026661 Jy
! Component: 950  -  total flux cleaned = 7.04395e-05 Jy
! Component: 1000  -  total flux cleaned = -2.55414e-05 Jy
! Component: 1050  -  total flux cleaned = -7.2857e-05 Jy
! Component: 1100  -  total flux cleaned = -0.00019061 Jy
! Component: 1150  -  total flux cleaned = -0.000329567 Jy
! Component: 1200  -  total flux cleaned = -0.00042084 Jy
! Component: 1250  -  total flux cleaned = -0.000465978 Jy
! Component: 1300  -  total flux cleaned = -0.000533045 Jy
! Component: 1350  -  total flux cleaned = -0.000577395 Jy
! Component: 1400  -  total flux cleaned = -0.000664549 Jy
! Component: 1450  -  total flux cleaned = -0.000686176 Jy
! Component: 1500  -  total flux cleaned = -0.000771505 Jy
! Component: 1550  -  total flux cleaned = -0.000856314 Jy
! Component: 1600  -  total flux cleaned = -0.000939739 Jy
! Component: 1650  -  total flux cleaned = -0.0009811 Jy
! Component: 1700  -  total flux cleaned = -0.001063 Jy
! Component: 1750  -  total flux cleaned = -0.00114388 Jy
! Component: 1800  -  total flux cleaned = -0.00116412 Jy
! Component: 1850  -  total flux cleaned = -0.00116411 Jy
! Component: 1900  -  total flux cleaned = -0.00122301 Jy
! Component: 1950  -  total flux cleaned = -0.00124237 Jy
! Component: 2000  -  total flux cleaned = -0.00126156 Jy
! Total flux subtracted in 2048 components = -0.00126178 Jy
! Clean residual min=-0.001157 max=0.001368 Jy/beam
! Clean residual mean=-0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.135521 Jy
keep
! Adding 144 model components to the UV plane model.
! The established model now contains 195 components and 0.135521 Jy
![Exited script file: muppet]
wmap "J1629-1720_X_2011_06_28_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7873 x 1.871 at -2.024 degrees (North through East)
! Clean map  min=-0.0020597  max=0.12293 Jy/beam
! Writing clean map to FITS file: J1629-1720_X_2011_06_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.122931 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000357603 
device "J1629-1720_X_2011_06_28_pus\_map.eps/VPS"
! Attempting to open device: 'J1629-1720_X_2011_06_28_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.872692 0.872692 1.74538 3.49077 6.98154 13.9631 27.9262 55.8523
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.122 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7873 x 1.871 at -2.024 degrees (North through East)
! Clean map  min=-0.0020597  max=0.12293 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1629-1720_X_2011_06_28_pus\_map.gif/vgif"
! Attempting to open device: 'J1629-1720_X_2011_06_28_pus_map.gif/vgif'
mapplot cln