! Started logfile: J1629-1720_S_2011_06_28_pus_uvs.log on Tue Apr 24 22:43:06 2012 obs J1629-1720_S_2011_06_28_pus_uva.fits ! Reading UV FITS file: J1629-1720_S_2011_06_28_pus_uva.fits ! AN table 1: 181 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.227892 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1629-1720 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 4589 lines of history. ! ! Reading 25244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1629-1720_S_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1678 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1678 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1662 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1694 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952307Jy sigma=0.011495 ! Fit after self-cal, rms=0.925126Jy sigma=0.011215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.517 mas, bpa=-0.2985 degrees ! Estimated noise=957.395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627564 Jy ! Component: 100 - total flux cleaned = 0.0779754 Jy ! Total flux subtracted in 100 components = 0.0779754 Jy ! Clean residual min=-0.005058 max=0.005855 Jy/beam ! Clean residual mean=-0.000012 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.0779754 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0779754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111828Jy sigma=0.001253 ! Fit after self-cal, rms=0.111716Jy sigma=0.001252 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.571 mas, bpa=-2.033 degrees ! Estimated noise=375.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666358 Jy ! Component: 100 - total flux cleaned = 0.00958633 Jy ! Component: 150 - total flux cleaned = 0.0112009 Jy ! Component: 200 - total flux cleaned = 0.0121356 Jy ! Total flux subtracted in 200 components = 0.0121356 Jy ! Clean residual min=-0.001907 max=0.001792 Jy/beam ! Clean residual mean=0.000010 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.090111 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.090111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111394Jy sigma=0.001246 ! Fit after self-cal, rms=0.111435Jy sigma=0.001246 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 FT 1.00* HH 1.00* ! HN 1.05 KK 1.00* KP 0.99 MC 1.00* ! MK 0.99 NL 0.98 NY 1.00* OV 0.96 ! PT 0.97 SC 1.07 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 FT 1.00* HH 1.00* ! HN 1.10 KK 1.00* KP 1.00 MC 1.00* ! MK 0.99 NL 0.93 NY 1.00* OV 0.99 ! PT 0.96 SC 1.01 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 FT 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 0.98 MC 1.00* ! MK 1.02 NL 1.04 NY 1.00* OV 1.02 ! PT 1.05 SC 0.96 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 FT 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 0.98 MC 1.00* ! MK 1.03 NL 0.99 NY 1.00* OV 1.02 ! PT 1.03 SC 0.99 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.111435Jy sigma=0.001246 ! Fit after self-cal, rms=0.112314Jy sigma=0.001245 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=7.585 mas, bpa=-1.917 degrees ! Estimated noise=374.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354391 Jy ! Component: 100 - total flux cleaned = 0.00033729 Jy ! Component: 150 - total flux cleaned = 0.000307635 Jy ! Component: 200 - total flux cleaned = 0.000280828 Jy ! Total flux subtracted in 200 components = 0.000280828 Jy ! Clean residual min=-0.001652 max=0.001743 Jy/beam ! Clean residual mean=0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0903918 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0903918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112306Jy sigma=0.001245 ! Fit after self-cal, rms=0.112368Jy sigma=0.001245 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112368Jy sigma=0.001245 ! Fit after self-cal, rms=0.113376Jy sigma=0.001244 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=7.586 mas, bpa=-1.998 degrees ! Estimated noise=375.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397506 Jy ! Component: 100 - total flux cleaned = 0.000397046 Jy ! Component: 150 - total flux cleaned = 0.000384545 Jy ! Component: 200 - total flux cleaned = 0.000374014 Jy ! Total flux subtracted in 200 components = 0.000374014 Jy ! Clean residual min=-0.001645 max=0.001618 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0907658 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0907658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113370Jy sigma=0.001244 ! Fit after self-cal, rms=0.113405Jy sigma=0.001244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84293e-05 Jy ! Component: 100 - total flux cleaned = -4.24312e-06 Jy ! Component: 150 - total flux cleaned = -1.533e-05 Jy ! Component: 200 - total flux cleaned = -2.52863e-05 Jy ! Total flux subtracted in 200 components = -2.52863e-05 Jy ! Clean residual min=-0.001643 max=0.001628 Jy/beam ! Clean residual mean=0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0907406 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.0907406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113401Jy sigma=0.001244 ! Fit after self-cal, rms=0.113401Jy sigma=0.001244 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113401Jy sigma=0.001244 ! Fit after self-cal, rms=0.113656Jy sigma=0.001244 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=7.57 mas, bpa=-2.036 degrees ! Estimated noise=375.654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436414 Jy ! Component: 100 - total flux cleaned = 0.000449961 Jy ! Component: 150 - total flux cleaned = 0.000449904 Jy ! Component: 200 - total flux cleaned = 0.000440457 Jy ! Total flux subtracted in 200 components = 0.000440457 Jy ! Clean residual min=-0.001629 max=0.001649 Jy/beam ! Clean residual mean=0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.091181 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.091181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113652Jy sigma=0.001244 ! Fit after self-cal, rms=0.113656Jy sigma=0.001244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43543e-05 Jy ! Component: 100 - total flux cleaned = 1.45218e-05 Jy ! Component: 150 - total flux cleaned = 5.33233e-06 Jy ! Component: 200 - total flux cleaned = -3.09308e-06 Jy ! Total flux subtracted in 200 components = -3.09308e-06 Jy ! Clean residual min=-0.001628 max=0.001660 Jy/beam ! Clean residual mean=0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0911779 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0911779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113653Jy sigma=0.001244 ! Fit after self-cal, rms=0.113652Jy sigma=0.001244 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113652Jy sigma=0.001244 ! Fit after self-cal, rms=0.113688Jy sigma=0.001244 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.341 mas, bmaj=14.21 mas, bpa=4.346 degrees ! Estimated noise=460.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000774441 Jy ! Component: 100 - total flux cleaned = 0.000808653 Jy ! Component: 150 - total flux cleaned = 0.000835718 Jy ! Component: 200 - total flux cleaned = 0.000859667 Jy ! Total flux subtracted in 200 components = 0.000859667 Jy ! Clean residual min=-0.001766 max=0.001783 Jy/beam ! Clean residual mean=0.000005 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0920376 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.0920376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113686Jy sigma=0.001244 ! Fit after self-cal, rms=0.113686Jy sigma=0.001244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137818 Jy ! Component: 100 - total flux cleaned = 0.000138095 Jy ! Component: 150 - total flux cleaned = 0.000138461 Jy ! Component: 200 - total flux cleaned = 0.00016046 Jy ! Total flux subtracted in 200 components = 0.00016046 Jy ! Clean residual min=-0.001760 max=0.001771 Jy/beam ! Clean residual mean=0.000006 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.092198 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.0921981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113685Jy sigma=0.001244 ! Fit after self-cal, rms=0.113685Jy sigma=0.001244 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.555 mas, bpa=-2.077 degrees ! Estimated noise=375.978 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 7.555 at -2.077 degrees (North through East) ! Clean map min=-0.0015552 max=0.079919 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.483 mas, bpa=-0.2784 degrees ! Estimated noise=960.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626548 Jy ! Component: 100 - total flux cleaned = 0.0791284 Jy ! Component: 150 - total flux cleaned = 0.0856505 Jy ! Component: 200 - total flux cleaned = 0.0882119 Jy ! Total flux subtracted in 200 components = 0.0882119 Jy ! Clean residual min=-0.004344 max=0.004732 Jy/beam ! Clean residual mean=-0.000008 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.0882119 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0882119 Jy ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.555 mas, bpa=-2.077 degrees ! Estimated noise=375.978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258237 Jy ! Component: 100 - total flux cleaned = 0.00386732 Jy ! Component: 150 - total flux cleaned = 0.0043985 Jy ! Component: 200 - total flux cleaned = 0.00456695 Jy ! Total flux subtracted in 200 components = 0.00456695 Jy ! Clean residual min=-0.001579 max=0.001552 Jy/beam ! Clean residual mean=0.000005 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0927789 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.0927789 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.106 mas, bpa=-1.238 degrees ! Estimated noise=408.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.86981e-05 Jy ! Component: 100 - total flux cleaned = 0.000182347 Jy ! Component: 150 - total flux cleaned = 0.000283502 Jy ! Component: 200 - total flux cleaned = 0.000422034 Jy ! Total flux subtracted in 200 components = 0.000422034 Jy ! Clean residual min=-0.001667 max=0.001670 Jy/beam ! Clean residual mean=0.000006 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0932009 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.49732e-05 Jy ! Component: 100 - total flux cleaned = 0.00010601 Jy ! Component: 150 - total flux cleaned = 0.000125492 Jy ! Component: 200 - total flux cleaned = 0.000144673 Jy ! Total flux subtracted in 200 components = 0.000144673 Jy ! Clean residual min=-0.001646 max=0.001689 Jy/beam ! Clean residual mean=0.000006 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0933456 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 59 components and 0.0933456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113665Jy sigma=0.001244 ! Fit after self-cal, rms=0.113654Jy sigma=0.001244 wmodel J1629-1720_S_2011_06_28_pus_map.mod ! Writing 59 model components to file: J1629-1720_S_2011_06_28_pus_map.mod wobs J1629-1720_S_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J1629-1720_S_2011_06_28_pus_uvs.fits wwins J1629-1720_S_2011_06_28_pus_map.win ! wwins: Wrote 2 windows to J1629-1720_S_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000479924 Jy ! Component: 100 - total flux cleaned = -0.000958483 Jy ! Component: 150 - total flux cleaned = -0.00146779 Jy ! Component: 200 - total flux cleaned = -0.0019535 Jy ! Component: 250 - total flux cleaned = -0.00241833 Jy ! Component: 300 - total flux cleaned = -0.00288877 Jy ! Component: 350 - total flux cleaned = -0.00327103 Jy ! Component: 400 - total flux cleaned = -0.00364059 Jy ! Component: 450 - total flux cleaned = -0.00388704 Jy ! Component: 500 - total flux cleaned = -0.00404009 Jy ! Component: 550 - total flux cleaned = -0.00414725 Jy ! Component: 600 - total flux cleaned = -0.00421033 Jy ! Component: 650 - total flux cleaned = -0.004231 Jy ! Component: 700 - total flux cleaned = -0.0041911 Jy ! Component: 750 - total flux cleaned = -0.00417157 Jy ! Component: 800 - total flux cleaned = -0.0041712 Jy ! Component: 850 - total flux cleaned = -0.00407722 Jy ! Component: 900 - total flux cleaned = -0.00409542 Jy ! Component: 950 - total flux cleaned = -0.00404041 Jy ! Component: 1000 - total flux cleaned = -0.00396838 Jy ! Component: 1050 - total flux cleaned = -0.00389788 Jy ! Component: 1100 - total flux cleaned = -0.00382869 Jy ! Component: 1150 - total flux cleaned = -0.00376042 Jy ! Component: 1200 - total flux cleaned = -0.00365977 Jy ! Component: 1250 - total flux cleaned = -0.00359381 Jy ! Component: 1300 - total flux cleaned = -0.00352861 Jy ! Component: 1350 - total flux cleaned = -0.00348029 Jy ! Component: 1400 - total flux cleaned = -0.00341669 Jy ! Component: 1450 - total flux cleaned = -0.00335407 Jy ! Component: 1500 - total flux cleaned = -0.00332307 Jy ! Component: 1550 - total flux cleaned = -0.00324675 Jy ! Component: 1600 - total flux cleaned = -0.00326179 Jy ! Component: 1650 - total flux cleaned = -0.00321714 Jy ! Component: 1700 - total flux cleaned = -0.00324654 Jy ! Component: 1750 - total flux cleaned = -0.00321708 Jy ! Component: 1800 - total flux cleaned = -0.00323135 Jy ! Component: 1850 - total flux cleaned = -0.00321698 Jy ! Component: 1900 - total flux cleaned = -0.00323119 Jy ! Component: 1950 - total flux cleaned = -0.00321722 Jy ! Component: 2000 - total flux cleaned = -0.00325858 Jy ! Total flux subtracted in 2048 components = -0.00325859 Jy ! Clean residual min=-0.000790 max=0.000946 Jy/beam ! Clean residual mean=0.000006 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.090087 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 186 components and 0.090087 Jy ![Exited script file: muppet] wmap "J1629-1720_S_2011_06_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.106 at -1.238 degrees (North through East) ! Clean map min=-0.0014184 max=0.079503 Jy/beam ! Writing clean map to FITS file: J1629-1720_S_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0795034 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000268642 device "J1629-1720_S_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J1629-1720_S_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0137 1.0137 2.0274 4.0548 8.1096 16.2192 32.4384 64.8768 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.106 at -1.238 degrees (North through East) ! Clean map min=-0.0014184 max=0.079503 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1629-1720_S_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J1629-1720_S_2011_06_28_pus_map.gif/vgif' mapplot cln