! Started logfile: J1510+5702_X_2011_06_28_pus_uvs.log on Sat Apr 21 13:05:12 2012
obs J1510+5702_X_2011_06_28_pus_uva.fits
! Reading UV FITS file: J1510+5702_X_2011_06_28_pus_uva.fits
! AN table 1: 241 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.586337 visibilities/baseline/integration-bin.
! Found source: J1510+5702
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 5249 lines of history.
! 
! Reading 86480 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1510+5702_X_2011_06_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1004 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1004 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1004 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1004 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.903588Jy  sigma=0.008609
! Fit after  self-cal, rms=0.866800Jy  sigma=0.008300
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.5238 mas, bmaj=0.5249 mas, bpa=-35.65 degrees
! Estimated noise=627.186 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110762 Jy
! Component: 100  -  total flux cleaned = 0.157191 Jy
! Total flux subtracted in 100 components = 0.157191 Jy
! Clean residual min=-0.008126 max=0.022472 Jy/beam
! Clean residual mean=0.000051 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.157191 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.157191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187990Jy  sigma=0.001469
! Fit after  self-cal, rms=0.186984Jy  sigma=0.001462
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299394 Jy
! Component: 100  -  total flux cleaned = 0.0458406 Jy
! Total flux subtracted in 100 components = 0.0458406 Jy
! Clean residual min=-0.005675 max=0.010615 Jy/beam
! Clean residual mean=0.000033 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.203031 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 6 components and 0.203031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181193Jy  sigma=0.001376
! Fit after  self-cal, rms=0.180765Jy  sigma=0.001373
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Added new window around map position (-0.2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133468 Jy
! Component: 100  -  total flux cleaned = 0.0220813 Jy
! Total flux subtracted in 100 components = 0.0220813 Jy
! Clean residual min=-0.004743 max=0.005700 Jy/beam
! Clean residual mean=0.000024 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.225112 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.225112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179447Jy  sigma=0.001353
! Fit after  self-cal, rms=0.179325Jy  sigma=0.001352
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00752605 Jy
! Component: 100  -  total flux cleaned = 0.0128337 Jy
! Total flux subtracted in 100 components = 0.0128337 Jy
! Clean residual min=-0.004059 max=0.004853 Jy/beam
! Clean residual mean=0.000018 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.237946 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.237946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178908Jy  sigma=0.001345
! Fit after  self-cal, rms=0.178857Jy  sigma=0.001345
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6335 mas, bmaj=0.671 mas, bpa=-19.23 degrees
! Estimated noise=266.423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00640763 Jy
! Component: 100  -  total flux cleaned = 0.00990802 Jy
! Component: 150  -  total flux cleaned = 0.0121156 Jy
! Component: 200  -  total flux cleaned = 0.0130899 Jy
! Total flux subtracted in 200 components = 0.0130899 Jy
! Clean residual min=-0.002601 max=0.003748 Jy/beam
! Clean residual mean=0.000152 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.251036 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.251036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178660Jy  sigma=0.001342
! Fit after  self-cal, rms=0.178618Jy  sigma=0.001341
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Added new window around map position (0, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393925 Jy
! Component: 100  -  total flux cleaned = 0.00514095 Jy
! Component: 150  -  total flux cleaned = 0.00567944 Jy
! Component: 200  -  total flux cleaned = 0.00606428 Jy
! Total flux subtracted in 200 components = 0.00606428 Jy
! Clean residual min=-0.002121 max=0.002221 Jy/beam
! Clean residual mean=0.000120 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.2571 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 27 components and 0.2571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178523Jy  sigma=0.001340
! Fit after  self-cal, rms=0.178503Jy  sigma=0.001340
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     FT        1.00*    HH        1.00*    
!   HN        1.00     KK        0.94     KP        1.03     MC        0.96     
!   MK        0.99     NL        1.00     NY        1.02     OV        0.96     
!   PT        1.00     SC        0.96     SH        1.01     TS        1.03     
!   WF        0.99     WZ        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     FT        1.00*    HH        1.00*    
!   HN        1.01     KK        0.93     KP        1.01     MC        0.96     
!   MK        0.96     NL        1.00     NY        1.00     OV        0.99     
!   PT        1.01     SC        1.07     SH        1.04     TS        1.06     
!   WF        0.96     WZ        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     FT        1.00*    HH        1.00*    
!   HN        0.99     KK        0.95     KP        1.01     MC        0.95     
!   MK        0.96     NL        1.00     NY        1.02     OV        0.99     
!   PT        0.99     SC        0.96     SH        1.08     TS        1.04     
!   WF        1.02     WZ        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     FT        1.00*    HH        1.00*    
!   HN        1.01     KK        0.95     KP        0.99     MC        0.90     
!   MK        1.01     NL        1.02     NY        1.05     OV        1.04     
!   PT        1.01     SC        1.09     SH        0.98     TS        1.03     
!   WF        0.95     WZ        1.05     
! 
! 
! Fit before self-cal, rms=0.178503Jy  sigma=0.001340
! Fit after  self-cal, rms=0.176916Jy  sigma=0.001338
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6329 mas, bmaj=0.6733 mas, bpa=-25.3 degrees
! Estimated noise=264.558 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000977944 Jy
! Component: 100  -  total flux cleaned = -0.00113701 Jy
! Component: 150  -  total flux cleaned = -0.00105358 Jy
! Component: 200  -  total flux cleaned = -0.000977926 Jy
! Total flux subtracted in 200 components = -0.000977926 Jy
! Clean residual min=-0.001626 max=0.001913 Jy/beam
! Clean residual mean=0.000085 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.256122 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 0.256122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176885Jy  sigma=0.001338
! Fit after  self-cal, rms=0.176863Jy  sigma=0.001338
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176863Jy  sigma=0.001338
! Fit after  self-cal, rms=0.177293Jy  sigma=0.001337
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6345 mas, bmaj=0.6734 mas, bpa=-27.56 degrees
! Estimated noise=264.329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100281 Jy
! Component: 100  -  total flux cleaned = 6.08939e-05 Jy
! Component: 150  -  total flux cleaned = 0.000259547 Jy
! Component: 200  -  total flux cleaned = 0.000344753 Jy
! Total flux subtracted in 200 components = 0.000344753 Jy
! Clean residual min=-0.001392 max=0.001539 Jy/beam
! Clean residual mean=0.000061 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.256467 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 43 components and 0.256467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177278Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177289Jy  sigma=0.001336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18.4, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000943675 Jy
! Component: 100  -  total flux cleaned = 0.00101839 Jy
! Component: 150  -  total flux cleaned = 0.00107731 Jy
! Component: 200  -  total flux cleaned = 0.0011305 Jy
! Total flux subtracted in 200 components = 0.0011305 Jy
! Clean residual min=-0.001376 max=0.001448 Jy/beam
! Clean residual mean=0.000057 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.257598 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 53 components and 0.257598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177273Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177268Jy  sigma=0.001336
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177268Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177364Jy  sigma=0.001336
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6351 mas, bmaj=0.6739 mas, bpa=-28.01 degrees
! Estimated noise=264.292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000301684 Jy
! Component: 100  -  total flux cleaned = -0.000220619 Jy
! Component: 150  -  total flux cleaned = -0.000221636 Jy
! Component: 200  -  total flux cleaned = -0.000198859 Jy
! Total flux subtracted in 200 components = -0.000198859 Jy
! Clean residual min=-0.001365 max=0.001426 Jy/beam
! Clean residual mean=0.000055 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.257399 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 0.257399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177354Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177354Jy  sigma=0.001336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.00882e-06 Jy
! Component: 100  -  total flux cleaned = -4.73778e-06 Jy
! Component: 150  -  total flux cleaned = -2.54468e-05 Jy
! Component: 200  -  total flux cleaned = -5.49561e-06 Jy
! Total flux subtracted in 200 components = -5.49561e-06 Jy
! Clean residual min=-0.001361 max=0.001418 Jy/beam
! Clean residual mean=0.000055 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.257393 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 60 components and 0.257393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177348Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177345Jy  sigma=0.001336
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177345Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177322Jy  sigma=0.001336
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=1.955 mas, bmaj=2.867 mas, bpa=-45.27 degrees
! Estimated noise=430.918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.33747e-05 Jy
! Component: 100  -  total flux cleaned = 2.90768e-05 Jy
! Component: 150  -  total flux cleaned = 8.44867e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101822 Jy
! Total flux subtracted in 200 components = 0.000101822 Jy
! Clean residual min=-0.001610 max=0.001673 Jy/beam
! Clean residual mean=0.000230 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.257495 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 0.257495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177319Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177317Jy  sigma=0.001336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.33555e-05 Jy
! Component: 100  -  total flux cleaned = 2.26188e-05 Jy
! Component: 150  -  total flux cleaned = 8.86303e-06 Jy
! Component: 200  -  total flux cleaned = -4.38554e-06 Jy
! Total flux subtracted in 200 components = -4.38554e-06 Jy
! Clean residual min=-0.001608 max=0.001655 Jy/beam
! Clean residual mean=0.000230 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.257491 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.257491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177316Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177315Jy  sigma=0.001336
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6354 mas, bmaj=0.6743 mas, bpa=-28.45 degrees
! Estimated noise=264.136 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6354 x 0.6743 at -28.45 degrees (North through East)
! Clean map  min=-0.0012433  max=0.15216 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.5191 mas, bmaj=0.5314 mas, bpa=-62.06 degrees
! Estimated noise=624.727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111746 Jy
! Component: 100  -  total flux cleaned = 0.165331 Jy
! Component: 150  -  total flux cleaned = 0.19435 Jy
! Component: 200  -  total flux cleaned = 0.211219 Jy
! Total flux subtracted in 200 components = 0.211219 Jy
! Clean residual min=-0.004883 max=0.008986 Jy/beam
! Clean residual mean=0.000025 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.211219 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.211219 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6354 mas, bmaj=0.6743 mas, bpa=-28.45 degrees
! Estimated noise=264.136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170845 Jy
! Component: 100  -  total flux cleaned = 0.026385 Jy
! Component: 150  -  total flux cleaned = 0.0321496 Jy
! Component: 200  -  total flux cleaned = 0.0361807 Jy
! Total flux subtracted in 200 components = 0.0361807 Jy
! Clean residual min=-0.001883 max=0.003152 Jy/beam
! Clean residual mean=0.000113 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.2474 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 21 components and 0.2474 Jy
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Added new window around map position (-0.4, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031636 Jy
! Component: 100  -  total flux cleaned = 0.00514666 Jy
! Component: 150  -  total flux cleaned = 0.00618892 Jy
! Component: 200  -  total flux cleaned = 0.00709489 Jy
! Total flux subtracted in 200 components = 0.00709489 Jy
! Clean residual min=-0.001768 max=0.001431 Jy/beam
! Clean residual mean=0.000070 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.254495 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 38 components and 0.254495 Jy
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! Estimated beam: bmin=0.6159 mas, bmaj=0.6551 mas, bpa=-11.75 degrees
! Estimated noise=320.319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000667071 Jy
! Component: 100  -  total flux cleaned = 0.000908052 Jy
! Component: 150  -  total flux cleaned = 0.00112041 Jy
! Component: 200  -  total flux cleaned = 0.00136151 Jy
! Total flux subtracted in 200 components = 0.00136151 Jy
! Clean residual min=-0.001743 max=0.001820 Jy/beam
! Clean residual mean=0.000078 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.255856 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266715 Jy
! Component: 100  -  total flux cleaned = 0.000553261 Jy
! Component: 150  -  total flux cleaned = 0.000742508 Jy
! Component: 200  -  total flux cleaned = 0.000919913 Jy
! Total flux subtracted in 200 components = 0.000919913 Jy
! Clean residual min=-0.001760 max=0.001729 Jy/beam
! Clean residual mean=0.000070 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.256776 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 55 components and 0.256776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177344Jy  sigma=0.001336
! Fit after  self-cal, rms=0.177336Jy  sigma=0.001336
wmodel J1510+5702_X_2011_06_28_pus_map.mod
! Writing 55 model components to file: J1510+5702_X_2011_06_28_pus_map.mod
wobs J1510+5702_X_2011_06_28_pus_uvs.fits
! Writing UV FITS file: J1510+5702_X_2011_06_28_pus_uvs.fits
wwins J1510+5702_X_2011_06_28_pus_map.win
! wwins: Wrote 5 windows to J1510+5702_X_2011_06_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 9.47957e-05 Jy
! Component: 100  -  total flux cleaned = 0.000377852 Jy
! Component: 150  -  total flux cleaned = 0.000559258 Jy
! Component: 200  -  total flux cleaned = 0.00079562 Jy
! Component: 250  -  total flux cleaned = 0.000911455 Jy
! Component: 300  -  total flux cleaned = 0.00108241 Jy
! Component: 350  -  total flux cleaned = 0.00124989 Jy
! Component: 400  -  total flux cleaned = 0.00130472 Jy
! Component: 450  -  total flux cleaned = 0.00135894 Jy
! Component: 500  -  total flux cleaned = 0.00138583 Jy
! Component: 550  -  total flux cleaned = 0.00146549 Jy
! Component: 600  -  total flux cleaned = 0.00154381 Jy
! Component: 650  -  total flux cleaned = 0.00162116 Jy
! Component: 700  -  total flux cleaned = 0.00164693 Jy
! Component: 750  -  total flux cleaned = 0.00174836 Jy
! Component: 800  -  total flux cleaned = 0.00179857 Jy
! Component: 850  -  total flux cleaned = 0.0018483 Jy
! Component: 900  -  total flux cleaned = 0.00197143 Jy
! Component: 950  -  total flux cleaned = 0.00194696 Jy
! Component: 1000  -  total flux cleaned = 0.00204405 Jy
! Component: 1050  -  total flux cleaned = 0.00209212 Jy
! Component: 1100  -  total flux cleaned = 0.00213996 Jy
! Component: 1150  -  total flux cleaned = 0.00218749 Jy
! Component: 1200  -  total flux cleaned = 0.00235232 Jy
! Component: 1250  -  total flux cleaned = 0.0023289 Jy
! Component: 1300  -  total flux cleaned = 0.00244502 Jy
! Component: 1350  -  total flux cleaned = 0.00246824 Jy
! Component: 1400  -  total flux cleaned = 0.00258286 Jy
! Component: 1450  -  total flux cleaned = 0.00267396 Jy
! Component: 1500  -  total flux cleaned = 0.00274201 Jy
! Component: 1550  -  total flux cleaned = 0.00283203 Jy
! Component: 1600  -  total flux cleaned = 0.00287674 Jy
! Component: 1650  -  total flux cleaned = 0.00294339 Jy
! Component: 1700  -  total flux cleaned = 0.00303202 Jy
! Component: 1750  -  total flux cleaned = 0.0030761 Jy
! Component: 1800  -  total flux cleaned = 0.00314173 Jy
! Component: 1850  -  total flux cleaned = 0.0032288 Jy
! Component: 1900  -  total flux cleaned = 0.00327196 Jy
! Component: 1950  -  total flux cleaned = 0.00335797 Jy
! Component: 2000  -  total flux cleaned = 0.00342214 Jy
! Total flux subtracted in 2048 components = 0.00346476 Jy
! Clean residual min=-0.001139 max=0.001137 Jy/beam
! Clean residual mean=0.000042 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.260241 Jy
keep
! Adding 185 model components to the UV plane model.
! The established model now contains 240 components and 0.260241 Jy
![Exited script file: muppet]
wmap "J1510+5702_X_2011_06_28_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6159 x 0.6551 at -11.75 degrees (North through East)
! Clean map  min=-0.0013247  max=0.15013 Jy/beam
! Writing clean map to FITS file: J1510+5702_X_2011_06_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.150132 
invert
! Inverting map 
! Your choice of large map pixels excluded 6.67% of the data.
!  The x-axis pixel size should ideally be below 0.1502 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000361557 
device "J1510+5702_X_2011_06_28_pus\_map.eps/VPS"
! Attempting to open device: 'J1510+5702_X_2011_06_28_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.722478 0.722478 1.44496 2.88991 5.77982 11.5596 23.1193 46.2386 92.4771
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.15 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6159 x 0.6551 at -11.75 degrees (North through East)
! Clean map  min=-0.0013247  max=0.15013 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1510+5702_X_2011_06_28_pus\_map.gif/vgif"
! Attempting to open device: 'J1510+5702_X_2011_06_28_pus_map.gif/vgif'
mapplot cln