! Started logfile: J1352-4412_S_2011_06_28_pus_uvs.log on Tue Apr 24 22:40:48 2012 obs J1352-4412_S_2011_06_28_pus_uva.fits ! Reading UV FITS file: J1352-4412_S_2011_06_28_pus_uva.fits ! AN table 1: 177 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0436468 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1352-4412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 4589 lines of history. ! ! Reading 4728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1352-4412_S_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2610 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2610 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2514 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2514 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.841562Jy sigma=0.007448 ! Fit after self-cal, rms=0.794094Jy sigma=0.007062 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.828 mas, bmaj=6.845 mas, bpa=5.527 degrees ! Estimated noise=2555.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168354 Jy ! Component: 100 - total flux cleaned = 0.206253 Jy ! Total flux subtracted in 100 components = 0.206253 Jy ! Clean residual min=-0.015859 max=0.021781 Jy/beam ! Clean residual mean=-0.000172 rms=0.004995 Jy/beam ! Combined flux in latest and established models = 0.206253 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.206253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134185Jy sigma=0.001169 ! Fit after self-cal, rms=0.134172Jy sigma=0.001169 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.986 mas, bmaj=8.463 mas, bpa=6.508 degrees ! Estimated noise=1254.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224964 Jy ! Component: 100 - total flux cleaned = 0.0344534 Jy ! Component: 150 - total flux cleaned = 0.0412975 Jy ! Component: 200 - total flux cleaned = 0.0452414 Jy ! Total flux subtracted in 200 components = 0.0452414 Jy ! Clean residual min=-0.013219 max=0.016315 Jy/beam ! Clean residual mean=-0.000123 rms=0.004318 Jy/beam ! Combined flux in latest and established models = 0.251495 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.251495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130939Jy sigma=0.001131 ! Fit after self-cal, rms=0.130871Jy sigma=0.001129 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 360 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 FT 1.00* HH 1.00* ! HN 1.00* KK 1.00* KP 0.92 MC 1.00* ! MK 1.00 NL 1.00* NY 1.00* OV 0.94 ! PT 0.93 SC 0.96 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 360 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 FT 1.00* HH 1.00* ! HN 1.00* KK 1.00* KP 0.98 MC 1.00* ! MK 0.96 NL 1.00* NY 1.00* OV 0.99 ! PT 0.91 SC 0.90 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 FT 1.00* HH 1.00* ! HN 1.00* KK 1.02 KP 0.97 MC 1.00* ! MK 0.94 NL 1.00* NY 1.00* OV 1.05 ! PT 1.04 SC 0.90 SH 1.09 TS 1.61 ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 FT 1.00* HH 1.00* ! HN 1.00* KK 0.95 KP 0.95 MC 1.00* ! MK 1.02 NL 1.00* NY 1.00* OV 1.07 ! PT 0.95 SC 0.90 SH 0.92 TS 1.33 ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.130871Jy sigma=0.001129 ! Fit after self-cal, rms=0.129200Jy sigma=0.001129 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=7.705 mas, bpa=4.958 degrees ! Estimated noise=1366.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155941 Jy ! Component: 100 - total flux cleaned = 0.001394 Jy ! Component: 150 - total flux cleaned = 0.00139309 Jy ! Component: 200 - total flux cleaned = 0.00145293 Jy ! Total flux subtracted in 200 components = 0.00145293 Jy ! Clean residual min=-0.007300 max=0.005739 Jy/beam ! Clean residual mean=0.000047 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.252948 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.252948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129105Jy sigma=0.001128 ! Fit after self-cal, rms=0.129428Jy sigma=0.001126 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129428Jy sigma=0.001126 ! Fit after self-cal, rms=0.130731Jy sigma=0.001125 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.137 mas, bmaj=7.736 mas, bpa=5.079 degrees ! Estimated noise=1371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000535368 Jy ! Component: 100 - total flux cleaned = -0.000609391 Jy ! Component: 150 - total flux cleaned = -0.000609668 Jy ! Component: 200 - total flux cleaned = -0.00055601 Jy ! Total flux subtracted in 200 components = -0.00055601 Jy ! Clean residual min=-0.005840 max=0.004965 Jy/beam ! Clean residual mean=0.000029 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.252392 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.252392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130715Jy sigma=0.001125 ! Fit after self-cal, rms=0.130968Jy sigma=0.001124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82776e-05 Jy ! Component: 100 - total flux cleaned = -2.45258e-05 Jy ! Component: 150 - total flux cleaned = -2.48981e-05 Jy ! Component: 200 - total flux cleaned = -2.47833e-06 Jy ! Total flux subtracted in 200 components = -2.47833e-06 Jy ! Clean residual min=-0.005942 max=0.005020 Jy/beam ! Clean residual mean=0.000030 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.252389 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.252389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130960Jy sigma=0.001124 ! Fit after self-cal, rms=0.130966Jy sigma=0.001124 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130966Jy sigma=0.001124 ! Fit after self-cal, rms=0.131348Jy sigma=0.001124 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=7.745 mas, bpa=5.104 degrees ! Estimated noise=1373.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67653e-05 Jy ! Component: 100 - total flux cleaned = 9.86243e-05 Jy ! Component: 150 - total flux cleaned = 9.89645e-05 Jy ! Component: 200 - total flux cleaned = 9.89074e-05 Jy ! Total flux subtracted in 200 components = 9.89074e-05 Jy ! Clean residual min=-0.005763 max=0.005110 Jy/beam ! Clean residual mean=0.000029 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.252488 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.252488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131341Jy sigma=0.001124 ! Fit after self-cal, rms=0.131373Jy sigma=0.001124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07353e-06 Jy ! Component: 100 - total flux cleaned = 1.66723e-06 Jy ! Component: 150 - total flux cleaned = 1.81252e-06 Jy ! Component: 200 - total flux cleaned = 1.85805e-06 Jy ! Total flux subtracted in 200 components = 1.85805e-06 Jy ! Clean residual min=-0.005747 max=0.005113 Jy/beam ! Clean residual mean=0.000029 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.25249 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.25249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131368Jy sigma=0.001124 ! Fit after self-cal, rms=0.131369Jy sigma=0.001124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131369Jy sigma=0.001124 ! Fit after self-cal, rms=0.131464Jy sigma=0.001124 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.196 mas, bmaj=25.98 mas, bpa=-2.501 degrees ! Estimated noise=1997.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932162 Jy ! Component: 100 - total flux cleaned = 0.000934564 Jy ! Component: 150 - total flux cleaned = 0.000935507 Jy ! Component: 200 - total flux cleaned = 0.000936066 Jy ! Total flux subtracted in 200 components = 0.000936066 Jy ! Clean residual min=-0.006495 max=0.005837 Jy/beam ! Clean residual mean=0.000098 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.253426 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 46 components and 0.253426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131463Jy sigma=0.001124 ! Fit after self-cal, rms=0.131471Jy sigma=0.001124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.78174e-05 Jy ! Component: 100 - total flux cleaned = 6.81612e-05 Jy ! Component: 150 - total flux cleaned = 6.8646e-05 Jy ! Component: 200 - total flux cleaned = 6.90949e-05 Jy ! Total flux subtracted in 200 components = 6.90949e-05 Jy ! Clean residual min=-0.006483 max=0.005854 Jy/beam ! Clean residual mean=0.000099 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.253495 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 47 components and 0.253495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131473Jy sigma=0.001124 ! Fit after self-cal, rms=0.131478Jy sigma=0.001124 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=7.75 mas, bpa=5.121 degrees ! Estimated noise=1374.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.136 x 7.75 at 5.121 degrees (North through East) ! Clean map min=-0.0053741 max=0.21511 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=6.554 mas, bpa=4.399 degrees ! Estimated noise=2728.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166198 Jy ! Component: 100 - total flux cleaned = 0.204408 Jy ! Component: 150 - total flux cleaned = 0.219332 Jy ! Component: 200 - total flux cleaned = 0.228336 Jy ! Total flux subtracted in 200 components = 0.228336 Jy ! Clean residual min=-0.010404 max=0.008823 Jy/beam ! Clean residual mean=-0.000070 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 0.228336 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.228336 Jy ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=7.75 mas, bpa=5.121 degrees ! Estimated noise=1374.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011993 Jy ! Component: 100 - total flux cleaned = 0.0180824 Jy ! Component: 150 - total flux cleaned = 0.0214377 Jy ! Component: 200 - total flux cleaned = 0.0232948 Jy ! Total flux subtracted in 200 components = 0.0232948 Jy ! Clean residual min=-0.005879 max=0.005036 Jy/beam ! Clean residual mean=0.000022 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.251631 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.251631 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=7.852 mas, bpa=6.106 degrees ! Estimated noise=1524.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090615 Jy ! Component: 100 - total flux cleaned = 0.00109332 Jy ! Component: 150 - total flux cleaned = 0.00114752 Jy ! Component: 200 - total flux cleaned = 0.00119769 Jy ! Total flux subtracted in 200 components = 0.00119769 Jy ! Clean residual min=-0.005751 max=0.005223 Jy/beam ! Clean residual mean=0.000021 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.252829 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.2318e-05 Jy ! Component: 100 - total flux cleaned = 2.20236e-05 Jy ! Component: 150 - total flux cleaned = -4.80704e-08 Jy ! Component: 200 - total flux cleaned = 1.33943e-07 Jy ! Total flux subtracted in 200 components = 1.33943e-07 Jy ! Clean residual min=-0.005691 max=0.005191 Jy/beam ! Clean residual mean=0.000021 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.252829 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.252829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131486Jy sigma=0.001124 ! Fit after self-cal, rms=0.131508Jy sigma=0.001124 wmodel J1352-4412_S_2011_06_28_pus_map.mod ! Writing 48 model components to file: J1352-4412_S_2011_06_28_pus_map.mod wobs J1352-4412_S_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J1352-4412_S_2011_06_28_pus_uvs.fits wwins J1352-4412_S_2011_06_28_pus_map.win ! wwins: Wrote 1 windows to J1352-4412_S_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000956009 Jy ! Component: 100 - total flux cleaned = -0.000618411 Jy ! Component: 150 - total flux cleaned = -0.000616647 Jy ! Component: 200 - total flux cleaned = -0.000685933 Jy ! Component: 250 - total flux cleaned = -0.000750163 Jy ! Component: 300 - total flux cleaned = -0.000632277 Jy ! Component: 350 - total flux cleaned = -0.000796013 Jy ! Component: 400 - total flux cleaned = -0.000899847 Jy ! Component: 450 - total flux cleaned = -0.00104691 Jy ! Component: 500 - total flux cleaned = -0.00109242 Jy ! Component: 550 - total flux cleaned = -0.00118075 Jy ! Component: 600 - total flux cleaned = -0.00101149 Jy ! Component: 650 - total flux cleaned = -0.000930922 Jy ! Component: 700 - total flux cleaned = -0.00100994 Jy ! Component: 750 - total flux cleaned = -0.00101006 Jy ! Component: 800 - total flux cleaned = -0.000972655 Jy ! Component: 850 - total flux cleaned = -0.000899171 Jy ! Component: 900 - total flux cleaned = -0.000827745 Jy ! Component: 950 - total flux cleaned = -0.000827974 Jy ! Component: 1000 - total flux cleaned = -0.000793635 Jy ! Component: 1050 - total flux cleaned = -0.000692059 Jy ! Component: 1100 - total flux cleaned = -0.000792323 Jy ! Component: 1150 - total flux cleaned = -0.000759607 Jy ! Component: 1200 - total flux cleaned = -0.000759895 Jy ! Component: 1250 - total flux cleaned = -0.000856254 Jy ! Component: 1300 - total flux cleaned = -0.00082474 Jy ! Component: 1350 - total flux cleaned = -0.000948425 Jy ! Component: 1400 - total flux cleaned = -0.000948013 Jy ! Component: 1450 - total flux cleaned = -0.000948214 Jy ! Component: 1500 - total flux cleaned = -0.00100767 Jy ! Component: 1550 - total flux cleaned = -0.000919294 Jy ! Component: 1600 - total flux cleaned = -0.000861678 Jy ! Component: 1650 - total flux cleaned = -0.000890679 Jy ! Component: 1700 - total flux cleaned = -0.000862238 Jy ! Component: 1750 - total flux cleaned = -0.000777233 Jy ! Component: 1800 - total flux cleaned = -0.000692919 Jy ! Component: 1850 - total flux cleaned = -0.000580975 Jy ! Component: 1900 - total flux cleaned = -0.000525213 Jy ! Component: 1950 - total flux cleaned = -0.00038666 Jy ! Component: 2000 - total flux cleaned = -0.000276427 Jy ! Total flux subtracted in 2048 components = -0.00024895 Jy ! Clean residual min=-0.001698 max=0.001584 Jy/beam ! Clean residual mean=-0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.25258 Jy keep ! Adding 111 model components to the UV plane model. ! The established model now contains 159 components and 0.25258 Jy ![Exited script file: muppet] wmap "J1352-4412_S_2011_06_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.027 x 7.852 at 6.106 degrees (North through East) ! Clean map min=-0.0035452 max=0.21514 Jy/beam ! Writing clean map to FITS file: J1352-4412_S_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.215136 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00048282 device "J1352-4412_S_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J1352-4412_S_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.673277 0.673277 1.34655 2.69311 5.38622 10.7724 21.5449 43.0897 86.1795 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.027 x 7.852 at 6.106 degrees (North through East) ! Clean map min=-0.0035452 max=0.21514 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1352-4412_S_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J1352-4412_S_2011_06_28_pus_map.gif/vgif' mapplot cln