! Started logfile: J1037-2705_S_2011_06_28_pus_uvs.log on Wed Apr 25 10:48:54 2012 obs J1037-2705_S_2011_06_28_pus_uva.fits ! Reading UV FITS file: J1037-2705_S_2011_06_28_pus_uva.fits ! AN table 1: 180 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.233987 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1037-2705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 4589 lines of history. ! ! Reading 25776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2705_S_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1653 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1653 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1639 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1625 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973434Jy sigma=0.010456 ! Fit after self-cal, rms=0.928135Jy sigma=0.010022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=6.46 mas, bpa=-6.845 degrees ! Estimated noise=1009.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622862 Jy ! Component: 100 - total flux cleaned = 0.0759617 Jy ! Total flux subtracted in 100 components = 0.0759617 Jy ! Clean residual min=-0.005971 max=0.005676 Jy/beam ! Clean residual mean=-0.000007 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.0759618 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0759618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125547Jy sigma=0.001261 ! Fit after self-cal, rms=0.125129Jy sigma=0.001258 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.651 mas, bpa=-5.087 degrees ! Estimated noise=418.153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474208 Jy ! Component: 100 - total flux cleaned = 0.0068208 Jy ! Component: 150 - total flux cleaned = 0.00790278 Jy ! Component: 200 - total flux cleaned = 0.00808481 Jy ! Total flux subtracted in 200 components = 0.00808481 Jy ! Clean residual min=-0.002700 max=0.002970 Jy/beam ! Clean residual mean=-0.000005 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0840466 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.0840466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124980Jy sigma=0.001256 ! Fit after self-cal, rms=0.125011Jy sigma=0.001256 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.07 FT 1.00* HH 1.00* ! HN 1.06 KK 1.00* KP 0.90 MC 1.00* ! MK 0.98 NL 1.06 NY 1.00* OV 0.99 ! PT 0.97 SC 1.03 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.08 FT 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 0.96 MC 1.00* ! MK 0.97 NL 0.97 NY 1.00* OV 1.02 ! PT 0.94 SC 1.02 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 FT 1.00* HH 1.00* ! HN 1.09 KK 1.00* KP 1.02 MC 1.00* ! MK 1.01 NL 1.04 NY 1.00* OV 1.02 ! PT 1.05 SC 1.01 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 FT 1.00* HH 1.00* ! HN 1.03 KK 1.00* KP 1.01 MC 1.00* ! MK 1.05 NL 0.99 NY 1.00* OV 1.02 ! PT 1.01 SC 0.99 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.125011Jy sigma=0.001256 ! Fit after self-cal, rms=0.125612Jy sigma=0.001254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.643 mas, bpa=-5.002 degrees ! Estimated noise=417.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169427 Jy ! Component: 100 - total flux cleaned = -0.000243249 Jy ! Component: 150 - total flux cleaned = -0.000244295 Jy ! Component: 200 - total flux cleaned = -0.000244778 Jy ! Total flux subtracted in 200 components = -0.000244778 Jy ! Clean residual min=-0.002460 max=0.002529 Jy/beam ! Clean residual mean=0.000000 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0838018 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0838018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125608Jy sigma=0.001254 ! Fit after self-cal, rms=0.125667Jy sigma=0.001253 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125667Jy sigma=0.001253 ! Fit after self-cal, rms=0.125960Jy sigma=0.001253 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.632 mas, bpa=-4.94 degrees ! Estimated noise=417.063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184396 Jy ! Component: 100 - total flux cleaned = -0.000184976 Jy ! Component: 150 - total flux cleaned = -0.000185181 Jy ! Component: 200 - total flux cleaned = -0.000185373 Jy ! Total flux subtracted in 200 components = -0.000185373 Jy ! Clean residual min=-0.002332 max=0.002518 Jy/beam ! Clean residual mean=0.000001 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0836164 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0836164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125957Jy sigma=0.001253 ! Fit after self-cal, rms=0.125986Jy sigma=0.001253 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241614 Jy ! Component: 100 - total flux cleaned = 0.00268428 Jy ! Component: 150 - total flux cleaned = 0.00290655 Jy ! Component: 200 - total flux cleaned = 0.00309875 Jy ! Total flux subtracted in 200 components = 0.00309875 Jy ! Clean residual min=-0.002265 max=0.002009 Jy/beam ! Clean residual mean=0.000000 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0867152 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.0867152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125934Jy sigma=0.001252 ! Fit after self-cal, rms=0.125933Jy sigma=0.001252 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125933Jy sigma=0.001252 ! Fit after self-cal, rms=0.126155Jy sigma=0.001251 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=7.646 mas, bpa=-5.062 degrees ! Estimated noise=416.389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763683 Jy ! Component: 100 - total flux cleaned = 0.000924918 Jy ! Component: 150 - total flux cleaned = 0.000988994 Jy ! Component: 200 - total flux cleaned = 0.00104606 Jy ! Total flux subtracted in 200 components = 0.00104606 Jy ! Clean residual min=-0.002069 max=0.002015 Jy/beam ! Clean residual mean=-0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0877612 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.0877612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126134Jy sigma=0.001251 ! Fit after self-cal, rms=0.126168Jy sigma=0.001251 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025552 Jy ! Component: 100 - total flux cleaned = 0.000373562 Jy ! Component: 150 - total flux cleaned = 0.00042593 Jy ! Component: 200 - total flux cleaned = 0.000449243 Jy ! Total flux subtracted in 200 components = 0.000449243 Jy ! Clean residual min=-0.002005 max=0.001986 Jy/beam ! Clean residual mean=-0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0882105 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.0882105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126155Jy sigma=0.001251 ! Fit after self-cal, rms=0.126165Jy sigma=0.001251 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126165Jy sigma=0.001251 ! Fit after self-cal, rms=0.125925Jy sigma=0.001251 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.425 mas, bmaj=17.25 mas, bpa=1.118 degrees ! Estimated noise=515.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442298 Jy ! Component: 100 - total flux cleaned = 0.000417348 Jy ! Component: 150 - total flux cleaned = 0.000417015 Jy ! Component: 200 - total flux cleaned = 0.000417023 Jy ! Total flux subtracted in 200 components = 0.000417023 Jy ! Clean residual min=-0.001888 max=0.001802 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0886275 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.0886275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125923Jy sigma=0.001251 ! Fit after self-cal, rms=0.125931Jy sigma=0.001251 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115414 Jy ! Component: 100 - total flux cleaned = 7.76964e-05 Jy ! Component: 150 - total flux cleaned = 7.65142e-05 Jy ! Component: 200 - total flux cleaned = 9.20393e-05 Jy ! Total flux subtracted in 200 components = 9.20393e-05 Jy ! Clean residual min=-0.001874 max=0.001782 Jy/beam ! Clean residual mean=0.000000 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0887195 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.0887195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125931Jy sigma=0.001251 ! Fit after self-cal, rms=0.125931Jy sigma=0.001251 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.651 mas, bpa=-5.157 degrees ! Estimated noise=415.476 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 7.651 at -5.157 degrees (North through East) ! Clean map min=-0.0024937 max=0.080136 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.284 mas, bmaj=6.452 mas, bpa=-6.821 degrees ! Estimated noise=1002.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624007 Jy ! Component: 100 - total flux cleaned = 0.0759766 Jy ! Component: 150 - total flux cleaned = 0.0764545 Jy ! Component: 200 - total flux cleaned = 0.0773771 Jy ! Total flux subtracted in 200 components = 0.0773771 Jy ! Clean residual min=-0.005265 max=0.005445 Jy/beam ! Clean residual mean=-0.000006 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.0773771 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0773771 Jy ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.651 mas, bpa=-5.157 degrees ! Estimated noise=415.476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403481 Jy ! Component: 100 - total flux cleaned = 0.00652999 Jy ! Component: 150 - total flux cleaned = 0.00744232 Jy ! Component: 200 - total flux cleaned = 0.00814256 Jy ! Total flux subtracted in 200 components = 0.00814256 Jy ! Clean residual min=-0.002171 max=0.002091 Jy/beam ! Clean residual mean=0.000000 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0855197 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.0855197 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.336 mas, bpa=-5.209 degrees ! Estimated noise=451.161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398883 Jy ! Component: 100 - total flux cleaned = 0.000781849 Jy ! Component: 150 - total flux cleaned = 0.00111236 Jy ! Component: 200 - total flux cleaned = 0.00129685 Jy ! Total flux subtracted in 200 components = 0.00129685 Jy ! Clean residual min=-0.002126 max=0.002090 Jy/beam ! Clean residual mean=-0.000000 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0868165 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019921 Jy ! Component: 100 - total flux cleaned = 0.000349519 Jy ! Component: 150 - total flux cleaned = 0.000487205 Jy ! Component: 200 - total flux cleaned = 0.000587826 Jy ! Total flux subtracted in 200 components = 0.000587826 Jy ! Clean residual min=-0.001996 max=0.002087 Jy/beam ! Clean residual mean=-0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0874043 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 62 components and 0.0874043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125921Jy sigma=0.001251 ! Fit after self-cal, rms=0.125906Jy sigma=0.001250 wmodel J1037-2705_S_2011_06_28_pus_map.mod ! Writing 62 model components to file: J1037-2705_S_2011_06_28_pus_map.mod wobs J1037-2705_S_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J1037-2705_S_2011_06_28_pus_uvs.fits wwins J1037-2705_S_2011_06_28_pus_map.win ! wwins: Wrote 2 windows to J1037-2705_S_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198012 Jy ! Component: 100 - total flux cleaned = 0.000479863 Jy ! Component: 150 - total flux cleaned = 0.000748991 Jy ! Component: 200 - total flux cleaned = 0.000974894 Jy ! Component: 250 - total flux cleaned = 0.000974617 Jy ! Component: 300 - total flux cleaned = 0.000944176 Jy ! Component: 350 - total flux cleaned = 0.00088513 Jy ! Component: 400 - total flux cleaned = 0.000856435 Jy ! Component: 450 - total flux cleaned = 0.0007995 Jy ! Component: 500 - total flux cleaned = 0.00079972 Jy ! Component: 550 - total flux cleaned = 0.000799411 Jy ! Component: 600 - total flux cleaned = 0.000880441 Jy ! Component: 650 - total flux cleaned = 0.000827238 Jy ! Component: 700 - total flux cleaned = 0.000905537 Jy ! Component: 750 - total flux cleaned = 0.00093113 Jy ! Component: 800 - total flux cleaned = 0.00095615 Jy ! Component: 850 - total flux cleaned = 0.00105576 Jy ! Component: 900 - total flux cleaned = 0.00110455 Jy ! Component: 950 - total flux cleaned = 0.00112884 Jy ! Component: 1000 - total flux cleaned = 0.00115317 Jy ! Component: 1050 - total flux cleaned = 0.00127145 Jy ! Component: 1100 - total flux cleaned = 0.00124778 Jy ! Component: 1150 - total flux cleaned = 0.00134016 Jy ! Component: 1200 - total flux cleaned = 0.00133982 Jy ! Component: 1250 - total flux cleaned = 0.00142997 Jy ! Component: 1300 - total flux cleaned = 0.0013632 Jy ! Component: 1350 - total flux cleaned = 0.00149546 Jy ! Component: 1400 - total flux cleaned = 0.00151741 Jy ! Component: 1450 - total flux cleaned = 0.00153925 Jy ! Component: 1500 - total flux cleaned = 0.00156094 Jy ! Component: 1550 - total flux cleaned = 0.00168792 Jy ! Component: 1600 - total flux cleaned = 0.00175043 Jy ! Component: 1650 - total flux cleaned = 0.00189526 Jy ! Component: 1700 - total flux cleaned = 0.00187476 Jy ! Component: 1750 - total flux cleaned = 0.00201741 Jy ! Component: 1800 - total flux cleaned = 0.00209803 Jy ! Component: 1850 - total flux cleaned = 0.00223787 Jy ! Component: 1900 - total flux cleaned = 0.00231731 Jy ! Component: 1950 - total flux cleaned = 0.00237638 Jy ! Component: 2000 - total flux cleaned = 0.00247397 Jy ! Component: 2050 - total flux cleaned = 0.00255122 Jy ! Component: 2100 - total flux cleaned = 0.00262798 Jy ! Component: 2150 - total flux cleaned = 0.0026849 Jy ! Component: 2200 - total flux cleaned = 0.00276036 Jy ! Component: 2250 - total flux cleaned = 0.00279758 Jy ! Component: 2300 - total flux cleaned = 0.00287167 Jy ! Component: 2350 - total flux cleaned = 0.00290836 Jy ! Component: 2400 - total flux cleaned = 0.00289021 Jy ! Component: 2450 - total flux cleaned = 0.00296277 Jy ! Component: 2500 - total flux cleaned = 0.0030166 Jy ! Component: 2550 - total flux cleaned = 0.00303445 Jy ! Component: 2600 - total flux cleaned = 0.00310492 Jy ! Component: 2650 - total flux cleaned = 0.00310506 Jy ! Component: 2700 - total flux cleaned = 0.00317492 Jy ! Component: 2750 - total flux cleaned = 0.00312313 Jy ! Component: 2800 - total flux cleaned = 0.00314045 Jy ! Component: 2850 - total flux cleaned = 0.00317444 Jy ! Component: 2900 - total flux cleaned = 0.00324203 Jy ! Component: 2950 - total flux cleaned = 0.00320839 Jy ! Component: 3000 - total flux cleaned = 0.00315855 Jy ! Component: 3050 - total flux cleaned = 0.00322516 Jy ! Component: 3100 - total flux cleaned = 0.0032745 Jy ! Component: 3150 - total flux cleaned = 0.00330701 Jy ! Component: 3200 - total flux cleaned = 0.00330694 Jy ! Component: 3250 - total flux cleaned = 0.00333919 Jy ! Component: 3300 - total flux cleaned = 0.00332306 Jy ! Component: 3350 - total flux cleaned = 0.00337079 Jy ! Component: 3400 - total flux cleaned = 0.00340232 Jy ! Component: 3450 - total flux cleaned = 0.00338664 Jy ! Component: 3500 - total flux cleaned = 0.00346489 Jy ! Component: 3550 - total flux cleaned = 0.00348034 Jy ! Component: 3600 - total flux cleaned = 0.00352664 Jy ! Component: 3650 - total flux cleaned = 0.00357272 Jy ! Component: 3700 - total flux cleaned = 0.0035574 Jy ! Component: 3750 - total flux cleaned = 0.00352701 Jy ! Component: 3800 - total flux cleaned = 0.00349688 Jy ! Component: 3850 - total flux cleaned = 0.0035871 Jy ! Component: 3900 - total flux cleaned = 0.0036169 Jy ! Component: 3950 - total flux cleaned = 0.00363172 Jy ! Component: 4000 - total flux cleaned = 0.00369069 Jy ! Component: 4050 - total flux cleaned = 0.00372003 Jy ! Total flux subtracted in 4096 components = 0.00374928 Jy ! Clean residual min=-0.000947 max=0.000778 Jy/beam ! Clean residual mean=-0.000002 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0911536 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 360 components and 0.0911536 Jy ![Exited script file: muppet] wmap "J1037-2705_S_2011_06_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.802 x 7.336 at -5.209 degrees (North through East) ! Clean map min=-0.002655 max=0.080363 Jy/beam ! Writing clean map to FITS file: J1037-2705_S_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0803627 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025844 device "J1037-2705_S_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J1037-2705_S_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.964777 0.964777 1.92955 3.85911 7.71821 15.4364 30.8729 61.7457 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.802 x 7.336 at -5.209 degrees (North through East) ! Clean map min=-0.002655 max=0.080363 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1037-2705_S_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J1037-2705_S_2011_06_28_pus_map.gif/vgif' mapplot cln