! Started logfile: J0719-1955_X_2011_06_28_pus_uvs.log on Sat Apr 21 12:59:37 2012
obs J0719-1955_X_2011_06_28_pus_uva.fits
! Reading UV FITS file: J0719-1955_X_2011_06_28_pus_uva.fits
! AN table 1: 180 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.229557 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0719-1955
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 5249 lines of history.
! 
! Reading 25288 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0719-1955_X_2011_06_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1687 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1642 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1773 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1728 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.985982Jy  sigma=0.011329
! Fit after  self-cal, rms=0.931781Jy  sigma=0.010798
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6507 mas, bmaj=1.574 mas, bpa=-5.056 degrees
! Estimated noise=996.947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0599292 Jy
! Component: 100  -  total flux cleaned = 0.0729977 Jy
! Total flux subtracted in 100 components = 0.0729977 Jy
! Clean residual min=-0.004328 max=0.005621 Jy/beam
! Clean residual mean=0.000000 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.0729977 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.0729977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126214Jy  sigma=0.001297
! Fit after  self-cal, rms=0.125661Jy  sigma=0.001291
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8378 mas, bmaj=2.056 mas, bpa=-4.186 degrees
! Estimated noise=408.445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319477 Jy
! Component: 100  -  total flux cleaned = 0.00364808 Jy
! Component: 150  -  total flux cleaned = 0.0036456 Jy
! Component: 200  -  total flux cleaned = 0.00361698 Jy
! Total flux subtracted in 200 components = 0.00361698 Jy
! Clean residual min=-0.001941 max=0.002458 Jy/beam
! Clean residual mean=-0.000001 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0766147 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0766147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125565Jy  sigma=0.001290
! Fit after  self-cal, rms=0.125556Jy  sigma=0.001290
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     FT        1.00*    HH        1.00*    
!   HN        0.96     KK        1.00*    KP        1.04     MC        1.00*    
!   MK        1.02     NL        1.02     NY        1.00*    OV        1.04     
!   PT        1.02     SC        1.00     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     FT        1.00*    HH        1.00*    
!   HN        0.95     KK        1.00*    KP        1.05     MC        1.00*    
!   MK        1.00     NL        1.06     NY        1.00*    OV        1.09     
!   PT        1.03     SC        0.99     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     FT        1.00*    HH        1.00*    
!   HN        0.85     KK        1.00*    KP        1.01     MC        1.00*    
!   MK        0.97     NL        0.91     NY        1.00*    OV        1.10     
!   PT        1.00     SC        1.06     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.92     FT        1.00*    HH        1.00*    
!   HN        0.88     KK        1.00*    KP        0.97     MC        1.00*    
!   MK        1.02     NL        0.98     NY        1.00*    OV        1.04     
!   PT        0.93     SC        0.95     SH        1.00*    TS        1.00*    
!   WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.125556Jy  sigma=0.001290
! Fit after  self-cal, rms=0.120939Jy  sigma=0.001288
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8339 mas, bmaj=2.06 mas, bpa=-4.261 degrees
! Estimated noise=406.255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161412 Jy
! Component: 100  -  total flux cleaned = -0.000206991 Jy
! Component: 150  -  total flux cleaned = -0.000220976 Jy
! Component: 200  -  total flux cleaned = -0.000247719 Jy
! Total flux subtracted in 200 components = -0.000247719 Jy
! Clean residual min=-0.001756 max=0.001758 Jy/beam
! Clean residual mean=0.000002 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.076367 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 19 components and 0.076367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120935Jy  sigma=0.001288
! Fit after  self-cal, rms=0.120847Jy  sigma=0.001287
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120847Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120500Jy  sigma=0.001287
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8336 mas, bmaj=2.06 mas, bpa=-4.112 degrees
! Estimated noise=405.454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.82179e-05 Jy
! Component: 100  -  total flux cleaned = -0.000130667 Jy
! Component: 150  -  total flux cleaned = -0.000156441 Jy
! Component: 200  -  total flux cleaned = -0.000168963 Jy
! Total flux subtracted in 200 components = -0.000168963 Jy
! Clean residual min=-0.001742 max=0.001689 Jy/beam
! Clean residual mean=0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.076198 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.076198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120496Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120502Jy  sigma=0.001287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.37848e-05 Jy
! Component: 100  -  total flux cleaned = -3.70322e-05 Jy
! Component: 150  -  total flux cleaned = -6.12908e-05 Jy
! Component: 200  -  total flux cleaned = -7.28447e-05 Jy
! Total flux subtracted in 200 components = -7.28447e-05 Jy
! Clean residual min=-0.001745 max=0.001700 Jy/beam
! Clean residual mean=0.000003 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0761252 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 25 components and 0.0761252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120499Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120493Jy  sigma=0.001287
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120493Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120701Jy  sigma=0.001287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8337 mas, bmaj=2.059 mas, bpa=-4.043 degrees
! Estimated noise=406.008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.91268e-05 Jy
! Component: 100  -  total flux cleaned = 7.94775e-05 Jy
! Component: 150  -  total flux cleaned = 6.81024e-05 Jy
! Component: 200  -  total flux cleaned = 4.53371e-05 Jy
! Total flux subtracted in 200 components = 4.53371e-05 Jy
! Clean residual min=-0.001747 max=0.001668 Jy/beam
! Clean residual mean=0.000003 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0761705 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.0761705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120698Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120703Jy  sigma=0.001287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.92156e-05 Jy
! Component: 100  -  total flux cleaned = -2.8991e-05 Jy
! Component: 150  -  total flux cleaned = -5.11815e-05 Jy
! Component: 200  -  total flux cleaned = -6.17198e-05 Jy
! Total flux subtracted in 200 components = -6.17198e-05 Jy
! Clean residual min=-0.001758 max=0.001663 Jy/beam
! Clean residual mean=0.000003 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.0761088 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 25 components and 0.0761088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120701Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120697Jy  sigma=0.001287
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120697Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120740Jy  sigma=0.001287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.039 mas, bmaj=4.254 mas, bpa=1.137 degrees
! Estimated noise=511.923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110254 Jy
! Component: 100  -  total flux cleaned = 0.000110926 Jy
! Component: 150  -  total flux cleaned = 0.000102655 Jy
! Component: 200  -  total flux cleaned = 7.86762e-05 Jy
! Total flux subtracted in 200 components = 7.86762e-05 Jy
! Clean residual min=-0.001934 max=0.001990 Jy/beam
! Clean residual mean=0.000006 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.0761875 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 26 components and 0.0761875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120739Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120744Jy  sigma=0.001287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.20751e-05 Jy
! Component: 100  -  total flux cleaned = -4.15234e-05 Jy
! Component: 150  -  total flux cleaned = -5.76609e-05 Jy
! Component: 200  -  total flux cleaned = -7.9745e-05 Jy
! Total flux subtracted in 200 components = -7.9745e-05 Jy
! Clean residual min=-0.001949 max=0.001989 Jy/beam
! Clean residual mean=0.000006 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.0761077 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 26 components and 0.0761077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120744Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120747Jy  sigma=0.001287
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8334 mas, bmaj=2.057 mas, bpa=-3.973 degrees
! Estimated noise=406.311 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8334 x 2.057 at -3.973 degrees (North through East)
! Clean map  min=-0.0015901  max=0.077556 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6501 mas, bmaj=1.582 mas, bpa=-4.693 degrees
! Estimated noise=985.856 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.060479 Jy
! Component: 100  -  total flux cleaned = 0.0737972 Jy
! Component: 150  -  total flux cleaned = 0.0779672 Jy
! Component: 200  -  total flux cleaned = 0.0779701 Jy
! Total flux subtracted in 200 components = 0.0779701 Jy
! Clean residual min=-0.004414 max=0.005313 Jy/beam
! Clean residual mean=0.000003 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.0779701 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0779701 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8334 mas, bmaj=2.057 mas, bpa=-3.973 degrees
! Estimated noise=406.311 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000619553 Jy
! Component: 100  -  total flux cleaned = -0.0007922 Jy
! Component: 150  -  total flux cleaned = -0.000972157 Jy
! Component: 200  -  total flux cleaned = -0.00105289 Jy
! Total flux subtracted in 200 components = -0.00105289 Jy
! Clean residual min=-0.001824 max=0.001711 Jy/beam
! Clean residual mean=0.000002 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0769172 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.0769172 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8017 mas, bmaj=1.938 mas, bpa=-1.732 degrees
! Estimated noise=439.684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144768 Jy
! Component: 100  -  total flux cleaned = -0.000299852 Jy
! Component: 150  -  total flux cleaned = -0.000440545 Jy
! Component: 200  -  total flux cleaned = -0.000542523 Jy
! Total flux subtracted in 200 components = -0.000542523 Jy
! Clean residual min=-0.001937 max=0.002014 Jy/beam
! Clean residual mean=0.000002 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0763747 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116097 Jy
! Component: 100  -  total flux cleaned = -0.000181174 Jy
! Component: 150  -  total flux cleaned = -0.000222789 Jy
! Component: 200  -  total flux cleaned = -0.000282339 Jy
! Total flux subtracted in 200 components = -0.000282339 Jy
! Clean residual min=-0.001948 max=0.002018 Jy/beam
! Clean residual mean=0.000002 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0760923 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.0760923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120753Jy  sigma=0.001287
! Fit after  self-cal, rms=0.120749Jy  sigma=0.001287
wmodel J0719-1955_X_2011_06_28_pus_map.mod
! Writing 21 model components to file: J0719-1955_X_2011_06_28_pus_map.mod
wobs J0719-1955_X_2011_06_28_pus_uvs.fits
! Writing UV FITS file: J0719-1955_X_2011_06_28_pus_uvs.fits
wwins J0719-1955_X_2011_06_28_pus_map.win
! wwins: Wrote 1 windows to J0719-1955_X_2011_06_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410327 Jy
! Component: 100  -  total flux cleaned = 0.000886228 Jy
! Component: 150  -  total flux cleaned = 0.00127183 Jy
! Component: 200  -  total flux cleaned = 0.0015495 Jy
! Component: 250  -  total flux cleaned = 0.00175881 Jy
! Component: 300  -  total flux cleaned = 0.00178731 Jy
! Component: 350  -  total flux cleaned = 0.00184353 Jy
! Component: 400  -  total flux cleaned = 0.00187129 Jy
! Component: 450  -  total flux cleaned = 0.00187158 Jy
! Component: 500  -  total flux cleaned = 0.0019241 Jy
! Component: 550  -  total flux cleaned = 0.00192379 Jy
! Component: 600  -  total flux cleaned = 0.00202542 Jy
! Component: 650  -  total flux cleaned = 0.00202529 Jy
! Component: 700  -  total flux cleaned = 0.00209929 Jy
! Component: 750  -  total flux cleaned = 0.00214742 Jy
! Component: 800  -  total flux cleaned = 0.00214736 Jy
! Component: 850  -  total flux cleaned = 0.0022402 Jy
! Component: 900  -  total flux cleaned = 0.00221711 Jy
! Component: 950  -  total flux cleaned = 0.00226231 Jy
! Component: 1000  -  total flux cleaned = 0.00226238 Jy
! Component: 1050  -  total flux cleaned = 0.00226294 Jy
! Component: 1100  -  total flux cleaned = 0.00230645 Jy
! Component: 1150  -  total flux cleaned = 0.00239161 Jy
! Component: 1200  -  total flux cleaned = 0.00234977 Jy
! Component: 1250  -  total flux cleaned = 0.0024123 Jy
! Component: 1300  -  total flux cleaned = 0.00247369 Jy
! Component: 1350  -  total flux cleaned = 0.00251396 Jy
! Component: 1400  -  total flux cleaned = 0.00253381 Jy
! Component: 1450  -  total flux cleaned = 0.00253393 Jy
! Component: 1500  -  total flux cleaned = 0.00255309 Jy
! Component: 1550  -  total flux cleaned = 0.00257232 Jy
! Component: 1600  -  total flux cleaned = 0.00261006 Jy
! Component: 1650  -  total flux cleaned = 0.00260985 Jy
! Component: 1700  -  total flux cleaned = 0.00257292 Jy
! Component: 1750  -  total flux cleaned = 0.00255476 Jy
! Component: 1800  -  total flux cleaned = 0.00257285 Jy
! Component: 1850  -  total flux cleaned = 0.00260858 Jy
! Component: 1900  -  total flux cleaned = 0.00255538 Jy
! Component: 1950  -  total flux cleaned = 0.00255549 Jy
! Component: 2000  -  total flux cleaned = 0.00259027 Jy
! Total flux subtracted in 2048 components = 0.00259023 Jy
! Clean residual min=-0.001060 max=0.001018 Jy/beam
! Clean residual mean=0.000000 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.0786826 Jy
keep
! Adding 141 model components to the UV plane model.
! The established model now contains 162 components and 0.0786825 Jy
![Exited script file: muppet]
wmap "J0719-1955_X_2011_06_28_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8017 x 1.938 at -1.732 degrees (North through East)
! Clean map  min=-0.0019205  max=0.077342 Jy/beam
! Writing clean map to FITS file: J0719-1955_X_2011_06_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0773415 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000319341 
device "J0719-1955_X_2011_06_28_pus\_map.eps/VPS"
! Attempting to open device: 'J0719-1955_X_2011_06_28_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.23869 1.23869 2.47738 4.95476 9.90953 19.8191 39.6381 79.2762
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.077 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8017 x 1.938 at -1.732 degrees (North through East)
! Clean map  min=-0.0019205  max=0.077342 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0719-1955_X_2011_06_28_pus\_map.gif/vgif"
! Attempting to open device: 'J0719-1955_X_2011_06_28_pus_map.gif/vgif'
mapplot cln