! Started logfile: J0349+4609_X_2011_06_28_pus_uvs.log on Sat Apr 21 12:57:35 2012 obs J0349+4609_X_2011_06_28_pus_uva.fits ! Reading UV FITS file: J0349+4609_X_2011_06_28_pus_uva.fits ! AN table 1: 320 integrations on 153 of 153 possible baselines. ! AN table 2: 11 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.326462 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0349+4609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 5250 lines of history. ! ! Reading 66132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0349+4609_X_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2824 telescope corrections were flagged in sub-array 1. ! A total of 198 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2824 telescope corrections were flagged in sub-array 1. ! A total of 198 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2824 telescope corrections were flagged in sub-array 1. ! A total of 198 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 2824 telescope corrections were flagged in sub-array 1. ! A total of 198 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.757093Jy sigma=0.007767 ! Fit after self-cal, rms=0.689918Jy sigma=0.007091 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.5526 mas, bmaj=0.6624 mas, bpa=1.384 degrees ! Estimated noise=625.273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238589 Jy ! Component: 100 - total flux cleaned = 0.312629 Jy ! Total flux subtracted in 100 components = 0.312629 Jy ! Clean residual min=-0.011643 max=0.034292 Jy/beam ! Clean residual mean=0.000131 rms=0.002429 Jy/beam ! Combined flux in latest and established models = 0.312629 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.312629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180862Jy sigma=0.001679 ! Fit after self-cal, rms=0.180558Jy sigma=0.001677 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038885 Jy ! Component: 100 - total flux cleaned = 0.0608328 Jy ! Total flux subtracted in 100 components = 0.0608328 Jy ! Clean residual min=-0.007376 max=0.011499 Jy/beam ! Clean residual mean=0.000091 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.373462 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.373462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167535Jy sigma=0.001487 ! Fit after self-cal, rms=0.167428Jy sigma=0.001486 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146536 Jy ! Component: 100 - total flux cleaned = 0.0246716 Jy ! Total flux subtracted in 100 components = 0.0246716 Jy ! Clean residual min=-0.005858 max=0.009923 Jy/beam ! Clean residual mean=0.000075 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.398134 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.398134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164893Jy sigma=0.001446 ! Fit after self-cal, rms=0.164868Jy sigma=0.001446 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (2.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103493 Jy ! Component: 100 - total flux cleaned = 0.0176624 Jy ! Total flux subtracted in 100 components = 0.0176624 Jy ! Clean residual min=-0.005129 max=0.008037 Jy/beam ! Clean residual mean=0.000062 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.415796 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.415796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163453Jy sigma=0.001423 ! Fit after self-cal, rms=0.163379Jy sigma=0.001423 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (1.8, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817837 Jy ! Component: 100 - total flux cleaned = 0.0139775 Jy ! Total flux subtracted in 100 components = 0.0139775 Jy ! Clean residual min=-0.004547 max=0.006709 Jy/beam ! Clean residual mean=0.000052 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.429774 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.429774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162471Jy sigma=0.001408 ! Fit after self-cal, rms=0.162416Jy sigma=0.001408 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (0.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764012 Jy ! Component: 100 - total flux cleaned = 0.0129738 Jy ! Total flux subtracted in 100 components = 0.0129738 Jy ! Clean residual min=-0.004134 max=0.005442 Jy/beam ! Clean residual mean=0.000043 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.442747 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.442747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161643Jy sigma=0.001395 ! Fit after self-cal, rms=0.161573Jy sigma=0.001395 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6563 mas, bmaj=0.846 mas, bpa=3.148 degrees ! Estimated noise=274.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121202 Jy ! Component: 100 - total flux cleaned = 0.0207156 Jy ! Component: 150 - total flux cleaned = 0.0272544 Jy ! Component: 200 - total flux cleaned = 0.03232 Jy ! Total flux subtracted in 200 components = 0.03232 Jy ! Clean residual min=-0.003049 max=0.006188 Jy/beam ! Clean residual mean=0.000550 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.475067 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 71 components and 0.475067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160488Jy sigma=0.001378 ! Fit after self-cal, rms=0.160377Jy sigma=0.001377 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (3.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710572 Jy ! Component: 100 - total flux cleaned = 0.0118181 Jy ! Component: 150 - total flux cleaned = 0.0155505 Jy ! Component: 200 - total flux cleaned = 0.0186226 Jy ! Total flux subtracted in 200 components = 0.0186226 Jy ! Clean residual min=-0.002630 max=0.003922 Jy/beam ! Clean residual mean=0.000418 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.49369 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 101 components and 0.49369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159983Jy sigma=0.001372 ! Fit after self-cal, rms=0.159937Jy sigma=0.001371 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 FT 1.00* HH 1.00* ! HN 0.99 KK 1.04 KP 1.00 MC 1.04 ! MK 1.01 NL 1.00 NY 1.00 OV 0.98 ! PT 0.97 SC 0.98 SH 1.00* TS 1.02 ! WF 1.00 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 FT 1.00* HH 1.00* ! HN 0.99 KK 0.97 KP 0.99 MC 1.04 ! MK 0.97 NL 1.03 NY 0.97 OV 1.00 ! PT 0.99 SC 1.02 SH 1.00* TS 1.06 ! WF 0.97 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 FT 1.00* HH 1.00* ! HN 1.00 KK 1.05 KP 0.99 MC 1.02 ! MK 0.97 NL 0.98 NY 0.97 OV 1.00 ! PT 0.97 SC 1.01 SH 1.00* TS 1.03 ! WF 1.04 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 FT 1.00* HH 1.00* ! HN 1.01 KK 1.01 KP 0.97 MC 1.02 ! MK 1.01 NL 1.01 NY 0.98 OV 1.03 ! PT 0.98 SC 1.03 SH 1.00* TS 1.00 ! WF 1.02 WZ 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.159937Jy sigma=0.001371 ! Fit after self-cal, rms=0.160865Jy sigma=0.001369 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=0.8526 mas, bpa=2.724 degrees ! Estimated noise=274.492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428549 Jy ! Component: 100 - total flux cleaned = 0.00702712 Jy ! Component: 150 - total flux cleaned = 0.0091318 Jy ! Component: 200 - total flux cleaned = 0.0105015 Jy ! Total flux subtracted in 200 components = 0.0105015 Jy ! Clean residual min=-0.002170 max=0.003368 Jy/beam ! Clean residual mean=0.000337 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.504191 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 0.504191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160718Jy sigma=0.001367 ! Fit after self-cal, rms=0.160733Jy sigma=0.001366 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (11.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327903 Jy ! Component: 100 - total flux cleaned = 0.00481291 Jy ! Component: 150 - total flux cleaned = 0.00619423 Jy ! Component: 200 - total flux cleaned = 0.00748713 Jy ! Total flux subtracted in 200 components = 0.00748713 Jy ! Clean residual min=-0.001914 max=0.003022 Jy/beam ! Clean residual mean=0.000296 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.511678 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 144 components and 0.511679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160631Jy sigma=0.001365 ! Fit after self-cal, rms=0.160626Jy sigma=0.001365 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160626Jy sigma=0.001365 ! Fit after self-cal, rms=0.161111Jy sigma=0.001363 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6576 mas, bmaj=0.8556 mas, bpa=3.084 degrees ! Estimated noise=274.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229288 Jy ! Component: 100 - total flux cleaned = 0.00377897 Jy ! Component: 150 - total flux cleaned = 0.00489392 Jy ! Component: 200 - total flux cleaned = 0.00579769 Jy ! Total flux subtracted in 200 components = 0.00579769 Jy ! Clean residual min=-0.001377 max=0.002380 Jy/beam ! Clean residual mean=0.000273 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.517476 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 0.517476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161051Jy sigma=0.001362 ! Fit after self-cal, rms=0.161052Jy sigma=0.001362 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203136 Jy ! Component: 100 - total flux cleaned = 0.00296748 Jy ! Component: 150 - total flux cleaned = 0.00363478 Jy ! Component: 200 - total flux cleaned = 0.00410574 Jy ! Total flux subtracted in 200 components = 0.00410574 Jy ! Clean residual min=-0.001421 max=0.002169 Jy/beam ! Clean residual mean=0.000245 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.521582 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 172 components and 0.521582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161007Jy sigma=0.001362 ! Fit after self-cal, rms=0.161004Jy sigma=0.001362 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (23.8, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180262 Jy ! Component: 100 - total flux cleaned = 0.00259991 Jy ! Component: 150 - total flux cleaned = 0.00329602 Jy ! Component: 200 - total flux cleaned = 0.00382135 Jy ! Total flux subtracted in 200 components = 0.00382135 Jy ! Clean residual min=-0.001321 max=0.002062 Jy/beam ! Clean residual mean=0.000228 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.525403 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 189 components and 0.525403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160965Jy sigma=0.001362 ! Fit after self-cal, rms=0.160962Jy sigma=0.001361 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (12, -14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198426 Jy ! Component: 100 - total flux cleaned = 0.00311643 Jy ! Component: 150 - total flux cleaned = 0.00372086 Jy ! Component: 200 - total flux cleaned = 0.00410011 Jy ! Total flux subtracted in 200 components = 0.00410011 Jy ! Clean residual min=-0.001291 max=0.001737 Jy/beam ! Clean residual mean=0.000209 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.529503 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 200 components and 0.529503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160926Jy sigma=0.001361 ! Fit after self-cal, rms=0.160924Jy sigma=0.001361 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (14.2, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158265 Jy ! Component: 100 - total flux cleaned = 0.00240101 Jy ! Component: 150 - total flux cleaned = 0.00288473 Jy ! Component: 200 - total flux cleaned = 0.00327231 Jy ! Total flux subtracted in 200 components = 0.00327231 Jy ! Clean residual min=-0.001347 max=0.001699 Jy/beam ! Clean residual mean=0.000188 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.532776 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 212 components and 0.532776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160894Jy sigma=0.001361 ! Fit after self-cal, rms=0.160892Jy sigma=0.001361 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (5.2, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156757 Jy ! Component: 100 - total flux cleaned = 0.00232773 Jy ! Component: 150 - total flux cleaned = 0.00287714 Jy ! Component: 200 - total flux cleaned = 0.00330197 Jy ! Total flux subtracted in 200 components = 0.00330197 Jy ! Clean residual min=-0.001337 max=0.001684 Jy/beam ! Clean residual mean=0.000173 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.536077 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 228 components and 0.536077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160866Jy sigma=0.001361 ! Fit after self-cal, rms=0.160865Jy sigma=0.001361 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (18.2, -22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148557 Jy ! Component: 100 - total flux cleaned = 0.00207759 Jy ! Component: 150 - total flux cleaned = 0.00254342 Jy ! Component: 200 - total flux cleaned = 0.00292267 Jy ! Total flux subtracted in 200 components = 0.00292267 Jy ! Clean residual min=-0.001348 max=0.001543 Jy/beam ! Clean residual mean=0.000164 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.539 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 239 components and 0.539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160843Jy sigma=0.001361 ! Fit after self-cal, rms=0.160842Jy sigma=0.001361 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (-11.4, -18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857929 Jy ! Component: 100 - total flux cleaned = 0.00133896 Jy ! Component: 150 - total flux cleaned = 0.00168285 Jy ! Component: 200 - total flux cleaned = 0.00191109 Jy ! Total flux subtracted in 200 components = 0.00191109 Jy ! Clean residual min=-0.001344 max=0.001478 Jy/beam ! Clean residual mean=0.000155 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.540911 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 252 components and 0.540911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160819Jy sigma=0.001360 ! Fit after self-cal, rms=0.160819Jy sigma=0.001360 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160819Jy sigma=0.001360 ! Fit after self-cal, rms=0.160776Jy sigma=0.001360 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=0.8567 mas, bpa=3.122 degrees ! Estimated noise=274.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642941 Jy ! Component: 100 - total flux cleaned = 0.00100249 Jy ! Component: 150 - total flux cleaned = 0.00133661 Jy ! Component: 200 - total flux cleaned = 0.00165006 Jy ! Total flux subtracted in 200 components = 0.00165006 Jy ! Clean residual min=-0.001171 max=0.001496 Jy/beam ! Clean residual mean=0.000157 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.542561 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 257 components and 0.542561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160761Jy sigma=0.001360 ! Fit after self-cal, rms=0.160763Jy sigma=0.001360 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310455 Jy ! Component: 100 - total flux cleaned = 0.000607563 Jy ! Component: 150 - total flux cleaned = 0.000865821 Jy ! Component: 200 - total flux cleaned = 0.00108956 Jy ! Total flux subtracted in 200 components = 0.00108956 Jy ! Clean residual min=-0.001170 max=0.001467 Jy/beam ! Clean residual mean=0.000151 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.543651 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 261 components and 0.543651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160753Jy sigma=0.001360 ! Fit after self-cal, rms=0.160752Jy sigma=0.001360 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160752Jy sigma=0.001360 ! Fit after self-cal, rms=0.160726Jy sigma=0.001360 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=2.23 mas, bmaj=2.458 mas, bpa=82.06 degrees ! Estimated noise=405.338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150903 Jy ! Component: 100 - total flux cleaned = 0.00273083 Jy ! Component: 150 - total flux cleaned = 0.00377847 Jy ! Component: 200 - total flux cleaned = 0.00469888 Jy ! Total flux subtracted in 200 components = 0.00469888 Jy ! Clean residual min=-0.001361 max=0.002477 Jy/beam ! Clean residual mean=0.000448 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.54835 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 273 components and 0.54835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160717Jy sigma=0.001360 ! Fit after self-cal, rms=0.160716Jy sigma=0.001360 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.4, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238184 Jy ! Component: 100 - total flux cleaned = 0.00398303 Jy ! Component: 150 - total flux cleaned = 0.00522788 Jy ! Component: 200 - total flux cleaned = 0.00627976 Jy ! Total flux subtracted in 200 components = 0.00627976 Jy ! Clean residual min=-0.001396 max=0.001967 Jy/beam ! Clean residual mean=0.000392 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.55463 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 295 components and 0.55463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160701Jy sigma=0.001360 ! Fit after self-cal, rms=0.160700Jy sigma=0.001360 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=0.857 mas, bpa=3.129 degrees ! Estimated noise=274.596 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6578 x 0.857 at 3.129 degrees (North through East) ! Clean map min=-0.0010842 max=0.32631 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.5541 mas, bmaj=0.6702 mas, bpa=1.895 degrees ! Estimated noise=633.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239682 Jy ! Component: 100 - total flux cleaned = 0.315406 Jy ! Component: 150 - total flux cleaned = 0.352548 Jy ! Component: 200 - total flux cleaned = 0.373101 Jy ! Total flux subtracted in 200 components = 0.373101 Jy ! Clean residual min=-0.004891 max=0.011923 Jy/beam ! Clean residual mean=0.000111 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.373101 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.373101 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=0.857 mas, bpa=3.129 degrees ! Estimated noise=274.596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311818 Jy ! Component: 100 - total flux cleaned = 0.0528295 Jy ! Component: 150 - total flux cleaned = 0.0686709 Jy ! Component: 200 - total flux cleaned = 0.0808716 Jy ! Total flux subtracted in 200 components = 0.0808716 Jy ! Clean residual min=-0.002818 max=0.007299 Jy/beam ! Clean residual mean=0.000734 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.453972 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 71 components and 0.453972 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (1, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00970478 Jy ! Component: 100 - total flux cleaned = 0.0176129 Jy ! Component: 150 - total flux cleaned = 0.0241565 Jy ! Component: 200 - total flux cleaned = 0.029615 Jy ! Total flux subtracted in 200 components = 0.029615 Jy ! Clean residual min=-0.001741 max=0.003326 Jy/beam ! Clean residual mean=0.000518 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.483587 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 113 components and 0.483587 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046184 Jy ! Component: 100 - total flux cleaned = 0.00862176 Jy ! Component: 150 - total flux cleaned = 0.0121338 Jy ! Component: 200 - total flux cleaned = 0.0152802 Jy ! Total flux subtracted in 200 components = 0.0152802 Jy ! Clean residual min=-0.001603 max=0.002563 Jy/beam ! Clean residual mean=0.000413 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.498868 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 151 components and 0.498867 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (1.2, -25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296545 Jy ! Component: 100 - total flux cleaned = 0.0056132 Jy ! Component: 150 - total flux cleaned = 0.0080744 Jy ! Component: 200 - total flux cleaned = 0.0103771 Jy ! Total flux subtracted in 200 components = 0.0103771 Jy ! Clean residual min=-0.001539 max=0.001982 Jy/beam ! Clean residual mean=0.000352 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.509245 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 184 components and 0.509245 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Added new window around map position (-18.2, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225824 Jy ! Component: 100 - total flux cleaned = 0.00430447 Jy ! Component: 150 - total flux cleaned = 0.00623519 Jy ! Component: 200 - total flux cleaned = 0.0080614 Jy ! Total flux subtracted in 200 components = 0.0080614 Jy ! Clean residual min=-0.001459 max=0.001710 Jy/beam ! Clean residual mean=0.000305 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.517306 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 210 components and 0.517306 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! Estimated beam: bmin=0.6406 mas, bmaj=0.8138 mas, bpa=-3.661 degrees ! Estimated noise=323.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024079 Jy ! Component: 100 - total flux cleaned = 0.0046049 Jy ! Component: 150 - total flux cleaned = 0.0066558 Jy ! Component: 200 - total flux cleaned = 0.00858908 Jy ! Total flux subtracted in 200 components = 0.00858908 Jy ! Clean residual min=-0.001488 max=0.002075 Jy/beam ! Clean residual mean=0.000432 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.525895 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183278 Jy ! Component: 100 - total flux cleaned = 0.00357557 Jy ! Component: 150 - total flux cleaned = 0.00517392 Jy ! Component: 200 - total flux cleaned = 0.00657736 Jy ! Total flux subtracted in 200 components = 0.00657736 Jy ! Clean residual min=-0.001508 max=0.001921 Jy/beam ! Clean residual mean=0.000378 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.532472 Jy selfcal ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 259 components and 0.532472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160793Jy sigma=0.001361 ! Fit after self-cal, rms=0.160776Jy sigma=0.001360 wmodel J0349+4609_X_2011_06_28_pus_map.mod ! Writing 259 model components to file: J0349+4609_X_2011_06_28_pus_map.mod wobs J0349+4609_X_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J0349+4609_X_2011_06_28_pus_uvs.fits wwins J0349+4609_X_2011_06_28_pus_map.win ! wwins: Wrote 20 windows to J0349+4609_X_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893928 Jy ! Component: 100 - total flux cleaned = 0.00173516 Jy ! Component: 150 - total flux cleaned = 0.00254949 Jy ! Component: 200 - total flux cleaned = 0.00334173 Jy ! Component: 250 - total flux cleaned = 0.00411586 Jy ! Component: 300 - total flux cleaned = 0.00487467 Jy ! Component: 350 - total flux cleaned = 0.0056196 Jy ! Component: 400 - total flux cleaned = 0.00635191 Jy ! Component: 450 - total flux cleaned = 0.00707199 Jy ! Component: 500 - total flux cleaned = 0.00778044 Jy ! Component: 550 - total flux cleaned = 0.00847819 Jy ! Component: 600 - total flux cleaned = 0.00916572 Jy ! Component: 650 - total flux cleaned = 0.00981666 Jy ! Component: 700 - total flux cleaned = 0.0104586 Jy ! Component: 750 - total flux cleaned = 0.0110922 Jy ! Component: 800 - total flux cleaned = 0.0117179 Jy ! Component: 850 - total flux cleaned = 0.0123359 Jy ! Component: 900 - total flux cleaned = 0.0129464 Jy ! Component: 950 - total flux cleaned = 0.0135498 Jy ! Component: 1000 - total flux cleaned = 0.0141217 Jy ! Component: 1050 - total flux cleaned = 0.0146628 Jy ! Component: 1100 - total flux cleaned = 0.0151738 Jy ! Component: 1150 - total flux cleaned = 0.0156795 Jy ! Component: 1200 - total flux cleaned = 0.0161326 Jy ! Component: 1250 - total flux cleaned = 0.0165817 Jy ! Component: 1300 - total flux cleaned = 0.0170034 Jy ! Component: 1350 - total flux cleaned = 0.0174446 Jy ! Component: 1400 - total flux cleaned = 0.0178821 Jy ! Component: 1450 - total flux cleaned = 0.0183386 Jy ! Component: 1500 - total flux cleaned = 0.0187234 Jy ! Component: 1550 - total flux cleaned = 0.0191726 Jy ! Component: 1600 - total flux cleaned = 0.0195514 Jy ! Component: 1650 - total flux cleaned = 0.0199494 Jy ! Component: 1700 - total flux cleaned = 0.0203663 Jy ! Component: 1750 - total flux cleaned = 0.0207582 Jy ! Component: 1800 - total flux cleaned = 0.0211472 Jy ! Component: 1850 - total flux cleaned = 0.0215118 Jy ! Component: 1900 - total flux cleaned = 0.0218738 Jy ! Component: 1950 - total flux cleaned = 0.0221699 Jy ! Component: 2000 - total flux cleaned = 0.0225061 Jy ! Total flux subtracted in 2048 components = 0.0228193 Jy ! Clean residual min=-0.001317 max=0.001213 Jy/beam ! Clean residual mean=0.000184 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.555292 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 470 components and 0.555291 Jy ![Exited script file: muppet] wmap "J0349+4609_X_2011_06_28_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6406 x 0.8138 at -3.661 degrees (North through East) ! Clean map min=-0.0013224 max=0.32514 Jy/beam ! Writing clean map to FITS file: J0349+4609_X_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325142 invert ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1663 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354249 device "J0349+4609_X_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J0349+4609_X_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326856 0.326856 0.653713 1.30743 2.61485 5.2297 10.4594 20.9188 41.8376 83.6752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6406 x 0.8138 at -3.661 degrees (North through East) ! Clean map min=-0.0013224 max=0.32514 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0349+4609_X_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J0349+4609_X_2011_06_28_pus_map.gif/vgif' mapplot cln