! Started logfile: J0016-0015_X_2011_06_28_pus_uvs.log on Sat Apr 21 12:55:38 2012 obs J0016-0015_X_2011_06_28_pus_uva.fits ! Reading UV FITS file: J0016-0015_X_2011_06_28_pus_uva.fits ! AN table 1: 130 integrations on 153 of 153 possible baselines. ! AN table 2: 487 integrations on 153 of 153 possible baselines. ! AN table 3: 256 integrations on 153 of 153 possible baselines. ! AN table 4: 24 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.0852734 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0016-0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 5249 lines of history. ! ! Reading 46812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0016-0015_X_2011_06_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2220 telescope corrections were flagged in sub-array 1. ! A total of 6751 telescope corrections were flagged in sub-array 2. ! A total of 3482 telescope corrections were flagged in sub-array 3. ! A total of 326 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 2220 telescope corrections were flagged in sub-array 1. ! A total of 6751 telescope corrections were flagged in sub-array 2. ! A total of 3482 telescope corrections were flagged in sub-array 3. ! A total of 326 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 2220 telescope corrections were flagged in sub-array 1. ! A total of 6751 telescope corrections were flagged in sub-array 2. ! A total of 3482 telescope corrections were flagged in sub-array 3. ! A total of 326 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 2220 telescope corrections were flagged in sub-array 1. ! A total of 6751 telescope corrections were flagged in sub-array 2. ! A total of 3482 telescope corrections were flagged in sub-array 3. ! A total of 326 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.738565Jy sigma=0.006755 ! Fit after self-cal, rms=0.659364Jy sigma=0.006183 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.5254 mas, bmaj=0.9216 mas, bpa=-2.633 degrees ! Estimated noise=645.761 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.283362 Jy ! Component: 100 - total flux cleaned = 0.352708 Jy ! Total flux subtracted in 100 components = 0.352708 Jy ! Clean residual min=-0.011001 max=0.029340 Jy/beam ! Clean residual mean=0.000180 rms=0.003364 Jy/beam ! Combined flux in latest and established models = 0.352708 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.352708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184010Jy sigma=0.001548 ! Fit after self-cal, rms=0.184011Jy sigma=0.001548 ! Inverting map ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0338642 Jy ! Component: 100 - total flux cleaned = 0.0548594 Jy ! Total flux subtracted in 100 components = 0.0548594 Jy ! Clean residual min=-0.008622 max=0.014073 Jy/beam ! Clean residual mean=0.000126 rms=0.002224 Jy/beam ! Combined flux in latest and established models = 0.407567 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.407567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175812Jy sigma=0.001412 ! Fit after self-cal, rms=0.175828Jy sigma=0.001412 ! Inverting map ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (0.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165776 Jy ! Component: 100 - total flux cleaned = 0.0284424 Jy ! Total flux subtracted in 100 components = 0.0284424 Jy ! Clean residual min=-0.006960 max=0.010014 Jy/beam ! Clean residual mean=0.000100 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.43601 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.43601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173674Jy sigma=0.001375 ! Fit after self-cal, rms=0.173599Jy sigma=0.001374 ! Inverting map ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.611 mas, bmaj=1.034 mas, bpa=-2.235 degrees ! Estimated noise=360.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164572 Jy ! Component: 100 - total flux cleaned = 0.027012 Jy ! Component: 150 - total flux cleaned = 0.0343236 Jy ! Component: 200 - total flux cleaned = 0.039511 Jy ! Total flux subtracted in 200 components = 0.039511 Jy ! Clean residual min=-0.003888 max=0.009503 Jy/beam ! Clean residual mean=0.000440 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.475521 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.475521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172136Jy sigma=0.001348 ! Fit after self-cal, rms=0.172108Jy sigma=0.001347 ! Inverting map ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860139 Jy ! Component: 100 - total flux cleaned = 0.0131372 Jy ! Component: 150 - total flux cleaned = 0.0160351 Jy ! Component: 200 - total flux cleaned = 0.0174667 Jy ! Total flux subtracted in 200 components = 0.0174667 Jy ! Clean residual min=-0.003947 max=0.006363 Jy/beam ! Clean residual mean=0.000342 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.492987 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.492987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171693Jy sigma=0.001342 ! Fit after self-cal, rms=0.171677Jy sigma=0.001341 ! Inverting map ! Your choice of large map pixels excluded 5.25% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.03 FT 1.00* HH 1.00 ! HN 1.00 KK 1.00* KP 1.00* MC 1.02 ! MK 1.00* NL 1.00 NY 1.09 OV 1.00* ! PT 1.03 SC 1.01 SH 1.00* TS 1.24 ! WF 0.99 WZ 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.98 FT 1.00* HH 1.00* ! HN 0.98 KK 1.00 KP 1.00 MC 1.00* ! MK 0.99 NL 1.00 NY 1.00* OV 0.98 ! PT 0.96 SC 0.95 SH 1.00* TS 1.00* ! WF 0.99 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.98 FT 1.00* HH 1.00* ! HN 0.92 KK 1.00* KP 1.00* MC 1.00* ! MK 1.01 NL 1.00* NY 1.00* OV 0.97 ! PT 1.00* SC 0.95 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.01 FT 1.00* HH 1.03 ! HN 1.01 KK 1.00* KP 1.00* MC 1.02 ! MK 1.00* NL 1.04 NY 1.04 OV 1.00* ! PT 1.03 SC 1.05 SH 1.00* TS 1.19 ! WF 0.97 WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.94 FT 1.00* HH 1.00* ! HN 1.00 KK 0.97 KP 0.99 MC 1.00* ! MK 0.96 NL 1.04 NY 1.00* OV 0.99 ! PT 0.99 SC 1.00 SH 1.00* TS 1.00* ! WF 0.99 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.94 FT 1.00* HH 1.00* ! HN 0.97 KK 1.00* KP 1.00* MC 1.00* ! MK 0.94 NL 1.00* NY 1.00* OV 0.99 ! PT 1.00* SC 0.98 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.03 FT 1.00* HH 1.09 ! HN 1.02 KK 1.00* KP 1.00* MC 1.03 ! MK 1.00* NL 1.00 NY 1.06 OV 1.00* ! PT 1.05 SC 1.04 SH 1.00* TS 1.21 ! WF 0.96 WZ 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00 FT 1.00* HH 1.00* ! HN 0.99 KK 1.04 KP 0.99 MC 1.00* ! MK 0.95 NL 1.00 NY 1.00* OV 1.00 ! PT 0.96 SC 0.98 SH 1.00* TS 1.00* ! WF 1.06 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.97 FT 1.00* HH 1.00* ! HN 0.98 KK 1.00* KP 1.00* MC 1.00* ! MK 0.90 NL 1.00* NY 1.00* OV 1.01 ! PT 1.00* SC 1.04 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* FT 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* SH 0.00* TS 0.00* ! WF 0.00* WZ 0.00* ! ! A total of 174 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.07 FT 1.00* HH 1.00 ! HN 1.01 KK 1.00* KP 1.00* MC 0.99 ! MK 1.00* NL 1.02 NY 1.07 OV 1.00* ! PT 1.04 SC 1.08 SH 1.00* TS 1.18 ! WF 0.90 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.98 FT 1.00* HH 1.00* ! HN 1.00 KK 1.05 KP 0.97 MC 1.00* ! MK 1.00 NL 1.03 NY 1.00* OV 1.04 ! PT 0.99 SC 1.02 SH 1.00* TS 1.00* ! WF 1.03 WZ 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.96 FT 1.00* HH 1.00* ! HN 1.02 KK 1.00* KP 1.00* MC 1.00* ! MK 0.99 NL 1.00* NY 1.00* OV 1.00 ! PT 1.00* SC 1.06 SH 1.00* TS 1.00* ! WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.171677Jy sigma=0.001341 ! Fit after self-cal, rms=0.175493Jy sigma=0.001333 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.6105 mas, bmaj=1.072 mas, bpa=-2.058 degrees ! Estimated noise=364.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048054 Jy ! Component: 100 - total flux cleaned = 0.00672876 Jy ! Component: 150 - total flux cleaned = 0.00774055 Jy ! Component: 200 - total flux cleaned = 0.00823181 Jy ! Total flux subtracted in 200 components = 0.00823181 Jy ! Clean residual min=-0.002064 max=0.003359 Jy/beam ! Clean residual mean=0.000328 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.501219 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.501219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175358Jy sigma=0.001331 ! Fit after self-cal, rms=0.175471Jy sigma=0.001331 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (-0.6, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306289 Jy ! Component: 100 - total flux cleaned = 0.0043067 Jy ! Component: 150 - total flux cleaned = 0.00533788 Jy ! Component: 200 - total flux cleaned = 0.00602392 Jy ! Total flux subtracted in 200 components = 0.00602392 Jy ! Clean residual min=-0.002030 max=0.002604 Jy/beam ! Clean residual mean=0.000297 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.507243 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.507243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175394Jy sigma=0.001330 ! Fit after self-cal, rms=0.175388Jy sigma=0.001330 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175388Jy sigma=0.001330 ! Fit after self-cal, rms=0.175941Jy sigma=0.001329 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.611 mas, bmaj=1.074 mas, bpa=-2.149 degrees ! Estimated noise=365.637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166581 Jy ! Component: 100 - total flux cleaned = 0.00213558 Jy ! Component: 150 - total flux cleaned = 0.00258475 Jy ! Component: 200 - total flux cleaned = 0.00303139 Jy ! Total flux subtracted in 200 components = 0.00303139 Jy ! Clean residual min=-0.001893 max=0.002480 Jy/beam ! Clean residual mean=0.000249 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.510274 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 0.510274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175907Jy sigma=0.001329 ! Fit after self-cal, rms=0.175897Jy sigma=0.001329 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146255 Jy ! Component: 100 - total flux cleaned = 0.00182534 Jy ! Component: 150 - total flux cleaned = 0.00218413 Jy ! Component: 200 - total flux cleaned = 0.00255026 Jy ! Total flux subtracted in 200 components = 0.00255026 Jy ! Clean residual min=-0.001796 max=0.002235 Jy/beam ! Clean residual mean=0.000236 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.512825 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.512825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175851Jy sigma=0.001328 ! Fit after self-cal, rms=0.175849Jy sigma=0.001328 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (18, 16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191832 Jy ! Component: 100 - total flux cleaned = 0.00275508 Jy ! Component: 150 - total flux cleaned = 0.00316142 Jy ! Component: 200 - total flux cleaned = 0.00345906 Jy ! Total flux subtracted in 200 components = 0.00345906 Jy ! Clean residual min=-0.001757 max=0.002157 Jy/beam ! Clean residual mean=0.000219 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.516284 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.516284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175810Jy sigma=0.001328 ! Fit after self-cal, rms=0.175800Jy sigma=0.001328 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (-7.8, 24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016595 Jy ! Component: 100 - total flux cleaned = 0.00229963 Jy ! Component: 150 - total flux cleaned = 0.00283875 Jy ! Component: 200 - total flux cleaned = 0.00316963 Jy ! Total flux subtracted in 200 components = 0.00316963 Jy ! Clean residual min=-0.001807 max=0.001963 Jy/beam ! Clean residual mean=0.000205 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.519453 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 0.519453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175768Jy sigma=0.001328 ! Fit after self-cal, rms=0.175762Jy sigma=0.001328 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (-20.2, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020152 Jy ! Component: 100 - total flux cleaned = 0.00313538 Jy ! Component: 150 - total flux cleaned = 0.00348243 Jy ! Component: 200 - total flux cleaned = 0.0036957 Jy ! Total flux subtracted in 200 components = 0.0036957 Jy ! Clean residual min=-0.001805 max=0.001982 Jy/beam ! Clean residual mean=0.000185 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.523149 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 0.523149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175730Jy sigma=0.001328 ! Fit after self-cal, rms=0.175723Jy sigma=0.001328 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175723Jy sigma=0.001328 ! Fit after self-cal, rms=0.175635Jy sigma=0.001327 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.612 mas, bmaj=1.074 mas, bpa=-2.15 degrees ! Estimated noise=365.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559539 Jy ! Component: 100 - total flux cleaned = 0.000951091 Jy ! Component: 150 - total flux cleaned = 0.00126201 Jy ! Component: 200 - total flux cleaned = 0.00146157 Jy ! Total flux subtracted in 200 components = 0.00146157 Jy ! Clean residual min=-0.001784 max=0.001803 Jy/beam ! Clean residual mean=0.000147 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.52461 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.52461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175618Jy sigma=0.001327 ! Fit after self-cal, rms=0.175587Jy sigma=0.001327 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159736 Jy ! Component: 100 - total flux cleaned = 0.00189935 Jy ! Component: 150 - total flux cleaned = 0.00221781 Jy ! Component: 200 - total flux cleaned = 0.00251321 Jy ! Total flux subtracted in 200 components = 0.00251321 Jy ! Clean residual min=-0.001660 max=0.001710 Jy/beam ! Clean residual mean=0.000141 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.527124 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 0.527124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175562Jy sigma=0.001327 ! Fit after self-cal, rms=0.175560Jy sigma=0.001327 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (12, 17.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150925 Jy ! Component: 100 - total flux cleaned = 0.00213487 Jy ! Component: 150 - total flux cleaned = 0.00246532 Jy ! Component: 200 - total flux cleaned = 0.00268938 Jy ! Total flux subtracted in 200 components = 0.00268938 Jy ! Clean residual min=-0.001536 max=0.001653 Jy/beam ! Clean residual mean=0.000129 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.529813 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 187 components and 0.529813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175540Jy sigma=0.001327 ! Fit after self-cal, rms=0.175541Jy sigma=0.001327 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175541Jy sigma=0.001327 ! Fit after self-cal, rms=0.175483Jy sigma=0.001327 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=1.99 mas, bmaj=2.908 mas, bpa=-2.17 degrees ! Estimated noise=517.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148867 Jy ! Component: 100 - total flux cleaned = 0.00247348 Jy ! Component: 150 - total flux cleaned = 0.00323841 Jy ! Component: 200 - total flux cleaned = 0.00374106 Jy ! Total flux subtracted in 200 components = 0.00374106 Jy ! Clean residual min=-0.001384 max=0.002214 Jy/beam ! Clean residual mean=0.000331 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.533554 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 200 components and 0.533554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175482Jy sigma=0.001326 ! Fit after self-cal, rms=0.175476Jy sigma=0.001326 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.4, 23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160577 Jy ! Component: 100 - total flux cleaned = 0.00209696 Jy ! Component: 150 - total flux cleaned = 0.00270244 Jy ! Component: 200 - total flux cleaned = 0.00324894 Jy ! Total flux subtracted in 200 components = 0.00324894 Jy ! Clean residual min=-0.001370 max=0.001588 Jy/beam ! Clean residual mean=0.000304 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.536803 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 229 components and 0.536803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175465Jy sigma=0.001326 ! Fit after self-cal, rms=0.175464Jy sigma=0.001326 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.6121 mas, bmaj=1.074 mas, bpa=-2.155 degrees ! Estimated noise=365.784 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6121 x 1.074 at -2.155 degrees (North through East) ! Clean map min=-0.0011597 max=0.36372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.533 mas, bmaj=0.9311 mas, bpa=-2.196 degrees ! Estimated noise=654.798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.286848 Jy ! Component: 100 - total flux cleaned = 0.358385 Jy ! Component: 150 - total flux cleaned = 0.392562 Jy ! Component: 200 - total flux cleaned = 0.414127 Jy ! Total flux subtracted in 200 components = 0.414127 Jy ! Clean residual min=-0.007341 max=0.011810 Jy/beam ! Clean residual mean=0.000122 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.414127 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.414127 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.6121 mas, bmaj=1.074 mas, bpa=-2.155 degrees ! Estimated noise=365.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239358 Jy ! Component: 100 - total flux cleaned = 0.0396572 Jy ! Component: 150 - total flux cleaned = 0.0509015 Jy ! Component: 200 - total flux cleaned = 0.059201 Jy ! Total flux subtracted in 200 components = 0.059201 Jy ! Clean residual min=-0.003632 max=0.005016 Jy/beam ! Clean residual mean=0.000430 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.473328 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 68 components and 0.473328 Jy ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647618 Jy ! Component: 100 - total flux cleaned = 0.0117001 Jy ! Component: 150 - total flux cleaned = 0.0159761 Jy ! Component: 200 - total flux cleaned = 0.0195736 Jy ! Total flux subtracted in 200 components = 0.0195736 Jy ! Clean residual min=-0.002184 max=0.003175 Jy/beam ! Clean residual mean=0.000314 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.492902 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 99 components and 0.492902 Jy ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Added new window around map position (12, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339106 Jy ! Component: 100 - total flux cleaned = 0.00620633 Jy ! Component: 150 - total flux cleaned = 0.00865203 Jy ! Component: 200 - total flux cleaned = 0.0107994 Jy ! Total flux subtracted in 200 components = 0.0107994 Jy ! Clean residual min=-0.001867 max=0.002041 Jy/beam ! Clean residual mean=0.000256 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.503701 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 122 components and 0.503701 Jy ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! Estimated beam: bmin=0.5743 mas, bmaj=0.94 mas, bpa=0.6316 degrees ! Estimated noise=445.136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223356 Jy ! Component: 100 - total flux cleaned = 0.00417273 Jy ! Component: 150 - total flux cleaned = 0.0057603 Jy ! Component: 200 - total flux cleaned = 0.00739441 Jy ! Total flux subtracted in 200 components = 0.00739441 Jy ! Clean residual min=-0.002003 max=0.002647 Jy/beam ! Clean residual mean=0.000312 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.511096 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152825 Jy ! Component: 100 - total flux cleaned = 0.00296444 Jy ! Component: 150 - total flux cleaned = 0.00412317 Jy ! Component: 200 - total flux cleaned = 0.00509849 Jy ! Total flux subtracted in 200 components = 0.00509849 Jy ! Clean residual min=-0.001902 max=0.002543 Jy/beam ! Clean residual mean=0.000275 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.516194 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 172 components and 0.516194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175481Jy sigma=0.001327 ! Fit after self-cal, rms=0.175457Jy sigma=0.001327 wmodel J0016-0015_X_2011_06_28_pus_map.mod ! Writing 172 model components to file: J0016-0015_X_2011_06_28_pus_map.mod wobs J0016-0015_X_2011_06_28_pus_uvs.fits ! Writing UV FITS file: J0016-0015_X_2011_06_28_pus_uvs.fits wwins J0016-0015_X_2011_06_28_pus_map.win ! wwins: Wrote 14 windows to J0016-0015_X_2011_06_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104821 Jy ! Component: 100 - total flux cleaned = 0.00178821 Jy ! Component: 150 - total flux cleaned = 0.00242002 Jy ! Component: 200 - total flux cleaned = 0.00306457 Jy ! Component: 250 - total flux cleaned = 0.00372479 Jy ! Component: 300 - total flux cleaned = 0.00436849 Jy ! Component: 350 - total flux cleaned = 0.00499776 Jy ! Component: 400 - total flux cleaned = 0.00561411 Jy ! Component: 450 - total flux cleaned = 0.00621873 Jy ! Component: 500 - total flux cleaned = 0.00681234 Jy ! Component: 550 - total flux cleaned = 0.00739603 Jy ! Component: 600 - total flux cleaned = 0.007856 Jy ! Component: 650 - total flux cleaned = 0.00833734 Jy ! Component: 700 - total flux cleaned = 0.00881157 Jy ! Component: 750 - total flux cleaned = 0.00930631 Jy ! Component: 800 - total flux cleaned = 0.00971278 Jy ! Component: 850 - total flux cleaned = 0.0101674 Jy ! Component: 900 - total flux cleaned = 0.0105896 Jy ! Component: 950 - total flux cleaned = 0.0109808 Jy ! Component: 1000 - total flux cleaned = 0.0113677 Jy ! Component: 1050 - total flux cleaned = 0.0117248 Jy ! Component: 1100 - total flux cleaned = 0.0121286 Jy ! Component: 1150 - total flux cleaned = 0.012478 Jy ! Component: 1200 - total flux cleaned = 0.0129222 Jy ! Component: 1250 - total flux cleaned = 0.0132395 Jy ! Component: 1300 - total flux cleaned = 0.0136745 Jy ! Component: 1350 - total flux cleaned = 0.0139852 Jy ! Component: 1400 - total flux cleaned = 0.0143638 Jy ! Component: 1450 - total flux cleaned = 0.0146687 Jy ! Component: 1500 - total flux cleaned = 0.0150633 Jy ! Component: 1550 - total flux cleaned = 0.015431 Jy ! Component: 1600 - total flux cleaned = 0.0157498 Jy ! Component: 1650 - total flux cleaned = 0.0161107 Jy ! Component: 1700 - total flux cleaned = 0.0164012 Jy ! Component: 1750 - total flux cleaned = 0.0167337 Jy ! Component: 1800 - total flux cleaned = 0.0170191 Jy ! Component: 1850 - total flux cleaned = 0.0173238 Jy ! Component: 1900 - total flux cleaned = 0.0176475 Jy ! Component: 1950 - total flux cleaned = 0.0179045 Jy ! Component: 2000 - total flux cleaned = 0.0181595 Jy ! Total flux subtracted in 2048 components = 0.0184333 Jy ! Clean residual min=-0.001079 max=0.001177 Jy/beam ! Clean residual mean=0.000149 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.534628 Jy keep ! Adding 170 model components to the UV plane model. ! The established model now contains 342 components and 0.534628 Jy ![Exited script file: muppet] wmap "J0016-0015_X_2011_06_28_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5743 x 0.94 at 0.6316 degrees (North through East) ! Clean map min=-0.0015337 max=0.36215 Jy/beam ! Writing clean map to FITS file: J0016-0015_X_2011_06_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.362149 invert ! Inverting map ! Your choice of large map pixels excluded 5.16% of the data. ! The x-axis pixel size should ideally be below 0.1714 milli-arcsec ! The y-axis pixel size should ideally be below 0.19 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000355467 device "J0016-0015_X_2011_06_28_pus\_map.eps/VPS" ! Attempting to open device: 'J0016-0015_X_2011_06_28_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.294465 0.294465 0.58893 1.17786 2.35572 4.71144 9.42289 18.8458 37.6915 75.3831 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.362 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5743 x 0.94 at 0.6316 degrees (North through East) ! Clean map min=-0.0015337 max=0.36215 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0016-0015_X_2011_06_28_pus\_map.gif/vgif" ! Attempting to open device: 'J0016-0015_X_2011_06_28_pus_map.gif/vgif' mapplot cln