! Started logfile: J1342-2900_X_2010_10_13_pus_uvs.log on Mon Feb 28 17:17:19 2011
obs J1342-2900_X_2010_10_13_pus_uva.fits
! Reading UV FITS file: J1342-2900_X_2010_10_13_pus_uva.fits
! AN table 1: 121 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.0563558 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1342-2900
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40996e+09        8e+06          1        8e+06
!  02        2  8.47996e+09        8e+06          1        8e+06
!  03        3  8.79496e+09        8e+06          1        8e+06
!  04        4  8.89996e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 5978 lines of history.
! 
! Reading 2864 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 256 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1342-2900_X_2010_10_13_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1339 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1339 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1339 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1339 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.833775Jy  sigma=0.010663
! Fit after  self-cal, rms=0.772246Jy  sigma=0.010035
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.4355 mas, bmaj=29.42 mas, bpa=19.19 degrees
! Estimated noise=2104.58 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182907 Jy
! Component: 100  -  total flux cleaned = 0.223 Jy
! Total flux subtracted in 100 components = 0.223 Jy
! Clean residual min=-0.005623 max=0.012313 Jy/beam
! Clean residual mean=0.003806 rms=0.004267 Jy/beam
! Combined flux in latest and established models = 0.223 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141144Jy  sigma=0.001240
! Fit after  self-cal, rms=0.141111Jy  sigma=0.001240
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5127 mas, bmaj=24.42 mas, bpa=19.06 degrees
! Estimated noise=1105.16 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197998 Jy
! Component: 100  -  total flux cleaned = 0.0311639 Jy
! Component: 150  -  total flux cleaned = 0.0381142 Jy
! Component: 200  -  total flux cleaned = 0.0395378 Jy
! Total flux subtracted in 200 components = 0.0395378 Jy
! Clean residual min=-0.003403 max=0.004261 Jy/beam
! Clean residual mean=0.001698 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.262538 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 46 components and 0.262538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138330Jy  sigma=0.001179
! Fit after  self-cal, rms=0.137875Jy  sigma=0.001179
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        1.01     KK        0.98     KP        1.00*    LA        1.00*    
!   MK        1.03     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        1.06     KK        1.01     KP        1.00*    LA        1.00*    
!   MK        0.95     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        1.00     KK        1.00     KP        1.00*    LA        1.00*    
!   MK        1.04     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        0.97     KK        0.99     KP        1.00*    LA        1.00*    
!   MK        1.04     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        0.91     
! 
! 
! Fit before self-cal, rms=0.137875Jy  sigma=0.001179
! Fit after  self-cal, rms=0.137223Jy  sigma=0.001167
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5138 mas, bmaj=24.47 mas, bpa=19.05 degrees
! Estimated noise=1093.37 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119344 Jy
! Component: 100  -  total flux cleaned = 0.00119071 Jy
! Component: 150  -  total flux cleaned = 0.000953648 Jy
! Component: 200  -  total flux cleaned = 0.000598742 Jy
! Total flux subtracted in 200 components = 0.000598742 Jy
! Clean residual min=-0.002015 max=0.002057 Jy/beam
! Clean residual mean=0.000098 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.263137 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 66 components and 0.263137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136976Jy  sigma=0.001166
! Fit after  self-cal, rms=0.136926Jy  sigma=0.001165
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136926Jy  sigma=0.001165
! Fit after  self-cal, rms=0.137090Jy  sigma=0.001165
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5141 mas, bmaj=24.43 mas, bpa=19.04 degrees
! Estimated noise=1097.73 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356854 Jy
! Component: 100  -  total flux cleaned = 0.000212546 Jy
! Component: 150  -  total flux cleaned = 0.000148067 Jy
! Component: 200  -  total flux cleaned = 8.04927e-05 Jy
! Total flux subtracted in 200 components = 8.04927e-05 Jy
! Clean residual min=-0.001266 max=0.001102 Jy/beam
! Clean residual mean=0.000014 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.263218 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.263218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136998Jy  sigma=0.001164
! Fit after  self-cal, rms=0.136945Jy  sigma=0.001164
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133811 Jy
! Component: 100  -  total flux cleaned = -9.24835e-05 Jy
! Component: 150  -  total flux cleaned = -2.49408e-05 Jy
! Component: 200  -  total flux cleaned = 0.00010818 Jy
! Total flux subtracted in 200 components = 0.00010818 Jy
! Clean residual min=-0.000688 max=0.000778 Jy/beam
! Clean residual mean=0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.263326 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 0.263326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136918Jy  sigma=0.001164
! Fit after  self-cal, rms=0.136867Jy  sigma=0.001164
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136867Jy  sigma=0.001164
! Fit after  self-cal, rms=0.137253Jy  sigma=0.001163
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5142 mas, bmaj=24.41 mas, bpa=19.04 degrees
! Estimated noise=1099.16 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.62091e-05 Jy
! Component: 100  -  total flux cleaned = 7.03746e-05 Jy
! Component: 150  -  total flux cleaned = 3.54213e-05 Jy
! Component: 200  -  total flux cleaned = 1.09777e-06 Jy
! Total flux subtracted in 200 components = 1.09777e-06 Jy
! Clean residual min=-0.000656 max=0.000733 Jy/beam
! Clean residual mean=-0.000008 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.263327 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 111 components and 0.263327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137209Jy  sigma=0.001163
! Fit after  self-cal, rms=0.137201Jy  sigma=0.001163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111142 Jy
! Component: 100  -  total flux cleaned = -0.000112366 Jy
! Component: 150  -  total flux cleaned = -0.000112061 Jy
! Component: 200  -  total flux cleaned = -8.10703e-05 Jy
! Total flux subtracted in 200 components = -8.10703e-05 Jy
! Clean residual min=-0.000775 max=0.000828 Jy/beam
! Clean residual mean=-0.000007 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.263246 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.263246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137187Jy  sigma=0.001163
! Fit after  self-cal, rms=0.137184Jy  sigma=0.001163
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137184Jy  sigma=0.001163
! Fit after  self-cal, rms=0.137241Jy  sigma=0.001163
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.135 mas, bmaj=34.1 mas, bpa=31.87 degrees
! Estimated noise=1788.04 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111334 Jy
! Component: 100  -  total flux cleaned = -0.000115019 Jy
! Component: 150  -  total flux cleaned = -0.000116752 Jy
! Component: 200  -  total flux cleaned = -0.00011464 Jy
! Total flux subtracted in 200 components = -0.00011464 Jy
! Clean residual min=-0.001349 max=0.001406 Jy/beam
! Clean residual mean=0.000017 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.263131 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 146 components and 0.263131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137225Jy  sigma=0.001163
! Fit after  self-cal, rms=0.137231Jy  sigma=0.001163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.63892e-06 Jy
! Component: 100  -  total flux cleaned = -2.73958e-06 Jy
! Component: 150  -  total flux cleaned = -4.33256e-06 Jy
! Component: 200  -  total flux cleaned = -4.44988e-05 Jy
! Total flux subtracted in 200 components = -4.44988e-05 Jy
! Clean residual min=-0.000812 max=0.000779 Jy/beam
! Clean residual mean=-0.000035 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.263087 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 156 components and 0.263087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137223Jy  sigma=0.001163
! Fit after  self-cal, rms=0.137229Jy  sigma=0.001163
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.5143 mas, bmaj=24.38 mas, bpa=19.04 degrees
! Estimated noise=1099.5 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5143 x 24.38 at 19.04 degrees (North through East)
! Clean map  min=-0.0055353  max=0.2178 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.4348 mas, bmaj=29.52 mas, bpa=19.18 degrees
! Estimated noise=2062.14 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.179138 Jy
! Component: 100  -  total flux cleaned = 0.218215 Jy
! Component: 150  -  total flux cleaned = 0.228911 Jy
! Component: 200  -  total flux cleaned = 0.237049 Jy
! Total flux subtracted in 200 components = 0.237049 Jy
! Clean residual min=-0.004060 max=0.006380 Jy/beam
! Clean residual mean=0.002085 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 0.237049 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.237049 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.5143 mas, bmaj=24.38 mas, bpa=19.04 degrees
! Estimated noise=1099.5 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.2, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013098 Jy
! Component: 100  -  total flux cleaned = 0.0191421 Jy
! Component: 150  -  total flux cleaned = 0.0204497 Jy
! Component: 200  -  total flux cleaned = 0.0217475 Jy
! Total flux subtracted in 200 components = 0.0217475 Jy
! Clean residual min=-0.004499 max=0.004474 Jy/beam
! Clean residual mean=0.001185 rms=0.001797 Jy/beam
! Combined flux in latest and established models = 0.258796 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 59 components and 0.258797 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.135 mas, bmaj=34.1 mas, bpa=31.87 degrees
! Estimated noise=1788.04 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565081 Jy
! Component: 100  -  total flux cleaned = 0.00567959 Jy
! Component: 150  -  total flux cleaned = 0.00570128 Jy
! Component: 200  -  total flux cleaned = 0.00577022 Jy
! Total flux subtracted in 200 components = 0.00577022 Jy
! Clean residual min=-0.006238 max=0.006164 Jy/beam
! Clean residual mean=0.000352 rms=0.002394 Jy/beam
! Combined flux in latest and established models = 0.264567 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102292 Jy
! Component: 100  -  total flux cleaned = 0.000224953 Jy
! Component: 150  -  total flux cleaned = 0.000421343 Jy
! Component: 200  -  total flux cleaned = 0.000728651 Jy
! Total flux subtracted in 200 components = 0.000728651 Jy
! Clean residual min=-0.047373 max=0.045707 Jy/beam
! Clean residual mean=-0.000154 rms=0.017534 Jy/beam
! Combined flux in latest and established models = 0.265295 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 130 components and 0.265296 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.5143 mas, bmaj=24.38 mas, bpa=19.04 degrees
! Estimated noise=1099.5 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069811 Jy
! Component: 100  -  total flux cleaned = -0.000196825 Jy
! Component: 150  -  total flux cleaned = -0.00020008 Jy
! Component: 200  -  total flux cleaned = -0.000246668 Jy
! Total flux subtracted in 200 components = -0.000246668 Jy
! Clean residual min=-0.009067 max=0.009191 Jy/beam
! Clean residual mean=-0.000062 rms=0.002538 Jy/beam
! Combined flux in latest and established models = 0.265049 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 146 components and 0.265049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137523Jy  sigma=0.001167
! Fit after  self-cal, rms=0.137489Jy  sigma=0.001165
wmodel J1342-2900_X_2010_10_13_pus_map.mod
! Writing 146 model components to file: J1342-2900_X_2010_10_13_pus_map.mod
wobs J1342-2900_X_2010_10_13_pus_uvs.fits
! Writing UV FITS file: J1342-2900_X_2010_10_13_pus_uvs.fits
wwins J1342-2900_X_2010_10_13_pus_map.win
! wwins: Wrote 2 windows to J1342-2900_X_2010_10_13_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00158639 Jy
! Component: 100  -  total flux cleaned = -0.00158127 Jy
! Component: 150  -  total flux cleaned = -0.00152957 Jy
! Component: 200  -  total flux cleaned = -0.00143129 Jy
! Component: 250  -  total flux cleaned = -0.00133594 Jy
! Component: 300  -  total flux cleaned = -0.00128962 Jy
! Component: 350  -  total flux cleaned = -0.00119723 Jy
! Component: 400  -  total flux cleaned = -0.00101525 Jy
! Component: 450  -  total flux cleaned = -0.000876251 Jy
! Component: 500  -  total flux cleaned = -0.000733826 Jy
! Component: 550  -  total flux cleaned = -0.00058755 Jy
! Component: 600  -  total flux cleaned = -0.00038589 Jy
! Component: 650  -  total flux cleaned = -0.000386289 Jy
! Component: 700  -  total flux cleaned = -0.000385208 Jy
! Component: 750  -  total flux cleaned = -0.000326482 Jy
! Component: 800  -  total flux cleaned = -0.000262531 Jy
! Component: 850  -  total flux cleaned = -0.000261112 Jy
! Component: 900  -  total flux cleaned = -0.000265138 Jy
! Component: 950  -  total flux cleaned = -0.000265565 Jy
! Component: 1000  -  total flux cleaned = -0.000262312 Jy
! Total flux subtracted in 1024 components = -0.00017193 Jy
! Clean residual min=-0.004599 max=0.004534 Jy/beam
! Clean residual mean=0.000087 rms=0.001551 Jy/beam
! Combined flux in latest and established models = 0.264877 Jy
keep
! Adding 22 model components to the UV plane model.
! The established model now contains 166 components and 0.264877 Jy
![Exited script file: muppet]
wmap "J1342-2900_X_2010_10_13_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5143 x 24.38 at 19.04 degrees (North through East)
! Clean map  min=-0.016077  max=0.21844 Jy/beam
! Writing clean map to FITS file: J1342-2900_X_2010_10_13_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.218441 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0012298 
device "J1342-2900_X_2010_10_13_pus\_map.eps/VPS"
! Attempting to open device: 'J1342-2900_X_2010_10_13_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.68897 1.68897 3.37794 6.75588 13.5118 27.0235 54.047
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0036 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.218 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5143 x 24.38 at 19.04 degrees (North through East)
! Clean map  min=-0.016077  max=0.21844 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1342-2900_X_2010_10_13_pus\_map.gif/vgif"
! Attempting to open device: 'J1342-2900_X_2010_10_13_pus_map.gif/vgif'
mapplot cln