! Started logfile: J1342-2900_S_2010_10_13_pus_uvs.log on Mon Feb 28 00:02:15 2011
obs J1342-2900_S_2010_10_13_pus_uva.fits
! Reading UV FITS file: J1342-2900_S_2010_10_13_pus_uva.fits
! AN table 1: 128 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.0555804 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1342-2900
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23696e+09        8e+06          1        8e+06
!  02        2  2.26696e+09        8e+06          1        8e+06
!  03        3  2.35696e+09        8e+06          1        8e+06
!  04        4  2.37696e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3545 lines of history.
! 
! Reading 2988 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1342-2900_S_2010_10_13_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1415 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1415 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1415 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1415 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.901287Jy  sigma=0.010650
! Fit after  self-cal, rms=0.869694Jy  sigma=0.010275
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.697 mas, bmaj=80.4 mas, bpa=18.64 degrees
! Estimated noise=1565.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103282 Jy
! Component: 100  -  total flux cleaned = 0.126573 Jy
! Total flux subtracted in 100 components = 0.126573 Jy
! Clean residual min=-0.008091 max=0.008646 Jy/beam
! Clean residual mean=0.001549 rms=0.003724 Jy/beam
! Combined flux in latest and established models = 0.126573 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.126573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115535Jy  sigma=0.001235
! Fit after  self-cal, rms=0.115368Jy  sigma=0.001233
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.912 mas, bmaj=79.85 mas, bpa=18.75 degrees
! Estimated noise=1117.39 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126105 Jy
! Component: 100  -  total flux cleaned = 0.0200922 Jy
! Component: 150  -  total flux cleaned = 0.0225071 Jy
! Component: 200  -  total flux cleaned = 0.024142 Jy
! Total flux subtracted in 200 components = 0.024142 Jy
! Clean residual min=-0.002086 max=0.002085 Jy/beam
! Clean residual mean=0.000521 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.150715 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 76 components and 0.150715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113632Jy  sigma=0.001216
! Fit after  self-cal, rms=0.113114Jy  sigma=0.001215
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        1.03     KK        1.01     KP        1.00*    LA        1.00*    
!   MK        1.01     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        0.93     
! 
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        1.05     KK        0.94     KP        1.00*    LA        1.00*    
!   MK        0.99     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        1.01     
! 
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        1.07     KK        1.01     KP        1.00*    LA        1.00*    
!   MK        1.02     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        1.02     
! 
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KB        0.75     KK        0.94     KP        1.00*    LA        1.00*    
!   MK        1.05     NL        1.00*    NY        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    TS        1.25     
! 
! 
! Fit before self-cal, rms=0.113114Jy  sigma=0.001215
! Fit after  self-cal, rms=0.108581Jy  sigma=0.001201
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.907 mas, bmaj=79.91 mas, bpa=18.77 degrees
! Estimated noise=1129.89 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228295 Jy
! Component: 100  -  total flux cleaned = 0.00235924 Jy
! Component: 150  -  total flux cleaned = 0.00235898 Jy
! Component: 200  -  total flux cleaned = 0.00246137 Jy
! Total flux subtracted in 200 components = 0.00246137 Jy
! Clean residual min=-0.000960 max=0.000920 Jy/beam
! Clean residual mean=0.000124 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.153176 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 112 components and 0.153176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108456Jy  sigma=0.001200
! Fit after  self-cal, rms=0.109108Jy  sigma=0.001196
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109108Jy  sigma=0.001196
! Fit after  self-cal, rms=0.110666Jy  sigma=0.001195
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.907 mas, bmaj=79.99 mas, bpa=18.76 degrees
! Estimated noise=1131.24 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585706 Jy
! Component: 100  -  total flux cleaned = 0.000580465 Jy
! Component: 150  -  total flux cleaned = 0.000615929 Jy
! Component: 200  -  total flux cleaned = 0.000580191 Jy
! Total flux subtracted in 200 components = 0.000580191 Jy
! Clean residual min=-0.000567 max=0.000554 Jy/beam
! Clean residual mean=0.000067 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.153756 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 145 components and 0.153756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110629Jy  sigma=0.001194
! Fit after  self-cal, rms=0.111137Jy  sigma=0.001194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000926624 Jy
! Component: 100  -  total flux cleaned = 0.00102219 Jy
! Component: 150  -  total flux cleaned = 0.00107928 Jy
! Component: 200  -  total flux cleaned = 0.00107897 Jy
! Total flux subtracted in 200 components = 0.00107897 Jy
! Clean residual min=-0.000469 max=0.000463 Jy/beam
! Clean residual mean=-0.000006 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.154835 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 173 components and 0.154835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111119Jy  sigma=0.001194
! Fit after  self-cal, rms=0.111140Jy  sigma=0.001194
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111140Jy  sigma=0.001194
! Fit after  self-cal, rms=0.112230Jy  sigma=0.001193
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.906 mas, bmaj=80.01 mas, bpa=18.76 degrees
! Estimated noise=1133.55 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173101 Jy
! Component: 100  -  total flux cleaned = 0.000236086 Jy
! Component: 150  -  total flux cleaned = 0.000235942 Jy
! Component: 200  -  total flux cleaned = 0.000263358 Jy
! Total flux subtracted in 200 components = 0.000263358 Jy
! Clean residual min=-0.000465 max=0.000457 Jy/beam
! Clean residual mean=0.000014 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.155098 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 188 components and 0.155098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112214Jy  sigma=0.001193
! Fit after  self-cal, rms=0.112463Jy  sigma=0.001193
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002663 Jy
! Component: 100  -  total flux cleaned = 0.000294125 Jy
! Component: 150  -  total flux cleaned = 0.000292896 Jy
! Component: 200  -  total flux cleaned = 0.000239572 Jy
! Total flux subtracted in 200 components = 0.000239572 Jy
! Clean residual min=-0.000461 max=0.000472 Jy/beam
! Clean residual mean=0.000015 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.155338 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 202 components and 0.155338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112452Jy  sigma=0.001193
! Fit after  self-cal, rms=0.112469Jy  sigma=0.001193
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112469Jy  sigma=0.001193
! Fit after  self-cal, rms=0.113020Jy  sigma=0.001193
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.9 mas, bmaj=88.12 mas, bpa=27.51 degrees
! Estimated noise=2016.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319349 Jy
! Component: 100  -  total flux cleaned = 0.000332773 Jy
! Component: 150  -  total flux cleaned = 0.000325923 Jy
! Component: 200  -  total flux cleaned = 0.000324013 Jy
! Total flux subtracted in 200 components = 0.000324013 Jy
! Clean residual min=-0.000126 max=0.000127 Jy/beam
! Clean residual mean=0.000017 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.155662 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 218 components and 0.155662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113017Jy  sigma=0.001193
! Fit after  self-cal, rms=0.113144Jy  sigma=0.001193
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04042e-05 Jy
! Component: 100  -  total flux cleaned = 9.11709e-06 Jy
! Component: 150  -  total flux cleaned = -1.61889e-05 Jy
! Component: 200  -  total flux cleaned = -4.91601e-05 Jy
! Total flux subtracted in 200 components = -4.91601e-05 Jy
! Clean residual min=-0.000704 max=0.000685 Jy/beam
! Clean residual mean=0.000046 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.155613 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 250 components and 0.155613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113139Jy  sigma=0.001193
! Fit after  self-cal, rms=0.113167Jy  sigma=0.001193
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.906 mas, bmaj=80.02 mas, bpa=18.76 degrees
! Estimated noise=1134.62 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.906 x 80.02 at 18.76 degrees (North through East)
! Clean map  min=-0.0036371  max=0.12011 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.7 mas, bmaj=80.88 mas, bpa=18.61 degrees
! Estimated noise=1590.48 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102824 Jy
! Component: 100  -  total flux cleaned = 0.125674 Jy
! Component: 150  -  total flux cleaned = 0.133358 Jy
! Component: 200  -  total flux cleaned = 0.138524 Jy
! Total flux subtracted in 200 components = 0.138524 Jy
! Clean residual min=-0.004597 max=0.004565 Jy/beam
! Clean residual mean=0.000973 rms=0.001752 Jy/beam
! Combined flux in latest and established models = 0.138524 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.138524 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.906 mas, bmaj=80.02 mas, bpa=18.76 degrees
! Estimated noise=1134.62 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00760498 Jy
! Component: 100  -  total flux cleaned = 0.011415 Jy
! Component: 150  -  total flux cleaned = 0.0128018 Jy
! Component: 200  -  total flux cleaned = 0.0130124 Jy
! Total flux subtracted in 200 components = 0.0130124 Jy
! Clean residual min=-0.001742 max=0.001749 Jy/beam
! Clean residual mean=0.000689 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.151536 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 82 components and 0.151536 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.9 mas, bmaj=88.12 mas, bpa=27.51 degrees
! Estimated noise=2016.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262545 Jy
! Component: 100  -  total flux cleaned = 0.00263309 Jy
! Component: 150  -  total flux cleaned = 0.00243198 Jy
! Component: 200  -  total flux cleaned = 0.00237624 Jy
! Total flux subtracted in 200 components = 0.00237624 Jy
! Clean residual min=-0.005378 max=0.005241 Jy/beam
! Clean residual mean=0.000502 rms=0.001972 Jy/beam
! Combined flux in latest and established models = 0.153912 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000494011 Jy
! Component: 100  -  total flux cleaned = -0.000592109 Jy
! Component: 150  -  total flux cleaned = -0.00177614 Jy
! Component: 200  -  total flux cleaned = -0.00201051 Jy
! Total flux subtracted in 200 components = -0.00201051 Jy
! Clean residual min=-0.032616 max=0.031096 Jy/beam
! Clean residual mean=-0.001068 rms=0.013113 Jy/beam
! Combined flux in latest and established models = 0.151902 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.151902 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.906 mas, bmaj=80.02 mas, bpa=18.76 degrees
! Estimated noise=1134.62 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00254682 Jy
! Component: 100  -  total flux cleaned = -0.00140135 Jy
! Component: 150  -  total flux cleaned = -0.000192057 Jy
! Component: 200  -  total flux cleaned = 0.00268208 Jy
! Total flux subtracted in 200 components = 0.00268208 Jy
! Clean residual min=-0.025246 max=0.024188 Jy/beam
! Clean residual mean=0.000935 rms=0.005740 Jy/beam
! Combined flux in latest and established models = 0.154584 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 112 components and 0.154584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115085Jy  sigma=0.001220
! Fit after  self-cal, rms=0.114941Jy  sigma=0.001205
wmodel J1342-2900_S_2010_10_13_pus_map.mod
! Writing 112 model components to file: J1342-2900_S_2010_10_13_pus_map.mod
wobs J1342-2900_S_2010_10_13_pus_uvs.fits
! Writing UV FITS file: J1342-2900_S_2010_10_13_pus_uvs.fits
wwins J1342-2900_S_2010_10_13_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J1342-2900_S_2010_10_13_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.906 x 80.02 at 18.76 degrees (North through East)
! Clean map  min=-0.025403  max=0.10636 Jy/beam
! Writing clean map to FITS file: J1342-2900_S_2010_10_13_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.106357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00274801 
device "J1342-2900_S_2010_10_13_pus\_map.eps/VPS"
! Attempting to open device: 'J1342-2900_S_2010_10_13_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.75129 7.75129 15.5026 31.0052 62.0103
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0082 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.106 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.906 x 80.02 at 18.76 degrees (North through East)
! Clean map  min=-0.025403  max=0.10636 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1342-2900_S_2010_10_13_pus\_map.gif/vgif"
! Attempting to open device: 'J1342-2900_S_2010_10_13_pus_map.gif/vgif'
mapplot cln