! Started logfile: J1058+8114_S_2010_10_13_pus_uvs.log on Mon Feb 28 00:00:54 2011 obs J1058+8114_S_2010_10_13_pus_uva.fits ! Reading UV FITS file: J1058+8114_S_2010_10_13_pus_uva.fits ! AN table 1: 207 integrations on 105 of 105 possible baselines. ! AN table 2: 21 integrations on 105 of 105 possible baselines. ! AN table 3: 99 integrations on 105 of 105 possible baselines. ! Apparent sampling: 0.394175 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1058+8114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23696e+09 8e+06 1 8e+06 ! 02 2 2.26696e+09 8e+06 1 8e+06 ! 03 3 2.35696e+09 8e+06 1 8e+06 ! 04 4 2.37696e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3545 lines of history. ! ! Reading 54136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1058+8114_S_2010_10_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1107 telescope corrections were flagged in sub-array 1. ! A total of 129 telescope corrections were flagged in sub-array 2. ! A total of 923 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1107 telescope corrections were flagged in sub-array 1. ! A total of 129 telescope corrections were flagged in sub-array 2. ! A total of 923 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1107 telescope corrections were flagged in sub-array 1. ! A total of 129 telescope corrections were flagged in sub-array 2. ! A total of 923 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1107 telescope corrections were flagged in sub-array 1. ! A total of 129 telescope corrections were flagged in sub-array 2. ! A total of 923 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.672526Jy sigma=0.006924 ! Fit after self-cal, rms=0.456849Jy sigma=0.004848 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.068 mas, bmaj=2.506 mas, bpa=-49.11 degrees ! Estimated noise=580.964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.429349 Jy ! Component: 100 - total flux cleaned = 0.533186 Jy ! Total flux subtracted in 100 components = 0.533186 Jy ! Clean residual min=-0.010183 max=0.042768 Jy/beam ! Clean residual mean=0.000129 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 0.533186 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.533186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179824Jy sigma=0.001644 ! Fit after self-cal, rms=0.179811Jy sigma=0.001644 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465014 Jy ! Component: 100 - total flux cleaned = 0.0717943 Jy ! Total flux subtracted in 100 components = 0.0717943 Jy ! Clean residual min=-0.010375 max=0.012498 Jy/beam ! Clean residual mean=0.000068 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.604981 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.604981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166424Jy sigma=0.001455 ! Fit after self-cal, rms=0.166281Jy sigma=0.001453 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160944 Jy ! Component: 100 - total flux cleaned = 0.0261083 Jy ! Total flux subtracted in 100 components = 0.0261083 Jy ! Clean residual min=-0.009607 max=0.008369 Jy/beam ! Clean residual mean=0.000046 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.631089 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 16 components and 0.631089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164876Jy sigma=0.001429 ! Fit after self-cal, rms=0.164847Jy sigma=0.001429 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.262 mas, bmaj=3.216 mas, bpa=-21.38 degrees ! Estimated noise=295.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673562 Jy ! Component: 100 - total flux cleaned = 0.00690555 Jy ! Component: 150 - total flux cleaned = 0.00677212 Jy ! Component: 200 - total flux cleaned = 0.00666259 Jy ! Total flux subtracted in 200 components = 0.00666259 Jy ! Clean residual min=-0.004295 max=0.005861 Jy/beam ! Clean residual mean=0.000505 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.637751 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.637751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164258Jy sigma=0.001426 ! Fit after self-cal, rms=0.164251Jy sigma=0.001426 ! Inverting map ! Added new window around map position (-1.5, -21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450266 Jy ! Component: 100 - total flux cleaned = 0.0042772 Jy ! Component: 150 - total flux cleaned = 0.00417306 Jy ! Component: 200 - total flux cleaned = 0.00399081 Jy ! Total flux subtracted in 200 components = 0.00399081 Jy ! Clean residual min=-0.004280 max=0.004676 Jy/beam ! Clean residual mean=0.000465 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.641742 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.641742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163984Jy sigma=0.001424 ! Fit after self-cal, rms=0.163974Jy sigma=0.001424 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HH 1.00* HN 1.02 ! KB 0.98 KK 0.97 KP 0.97 LA 1.05 ! MK 1.00 NL 0.99 NY 0.97 OV 0.99 ! PT 0.99 SC 1.03 TS 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HH 1.00* HN 1.06 ! KB 1.00* KK 0.96 KP 0.95 LA 1.01 ! MK 0.98 NL 1.00 NY 1.03 OV 0.96 ! PT 0.98 SC 1.08 TS 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HH 1.00* HN 1.04 ! KB 1.04 KK 0.99 KP 0.98 LA 1.04 ! MK 1.00 NL 0.96 NY 0.95 OV 0.97 ! PT 0.99 SC 1.08 TS 0.91 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HH 1.00* HN 1.03 ! KB 0.99 KK 0.97 KP 0.99 LA 1.02 ! MK 0.99 NL 1.00 NY 0.96 OV 1.05 ! PT 1.01 SC 1.03 TS 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 HH 1.00* HN 1.03 ! KB 1.00* KK 1.00 KP 0.98 LA 0.98 ! MK 0.99 NL 1.01 NY 1.01 OV 1.01 ! PT 0.99 SC 1.09 TS 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.03 HH 1.00* HN 1.06 ! KB 1.07 KK 0.97 KP 0.99 LA 1.02 ! MK 0.98 NL 0.99 NY 1.00 OV 1.02 ! PT 0.99 SC 1.07 TS 0.91 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HH 1.00* HN 1.04 ! KB 1.01 KK 0.97 KP 1.01 LA 1.00 ! MK 0.97 NL 1.00 NY 0.97 OV 1.02 ! PT 1.00 SC 1.02 TS 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HH 1.00* HN 1.06 ! KB 1.00* KK 0.96 KP 0.99 LA 0.98 ! MK 0.98 NL 0.99 NY 0.99 OV 0.99 ! PT 0.98 SC 1.08 TS 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HH 1.00* HN 1.03 ! KB 1.07 KK 0.97 KP 1.03 LA 0.99 ! MK 0.97 NL 1.00 NY 1.02 OV 1.03 ! PT 1.00 SC 1.05 TS 0.92 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HH 1.00* HN 1.04 ! KB 1.05 KK 0.97 KP 0.99 LA 1.00 ! MK 0.99 NL 0.98 NY 0.97 OV 1.02 ! PT 1.01 SC 1.08 TS 1.18 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.11 HH 1.00* HN 1.08 ! KB 1.00* KK 0.93 KP 0.97 LA 0.97 ! MK 0.99 NL 0.98 NY 1.03 OV 0.97 ! PT 0.99 SC 1.18 TS 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.01 HH 1.00* HN 1.05 ! KB 1.11 KK 0.96 KP 0.99 LA 1.00 ! MK 0.97 NL 0.99 NY 1.03 OV 0.97 ! PT 1.00 SC 1.08 TS 1.12 ! ! ! Fit before self-cal, rms=0.163974Jy sigma=0.001424 ! Fit after self-cal, rms=0.162078Jy sigma=0.001391 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=3.219 mas, bpa=-21.74 degrees ! Estimated noise=297.159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037009 Jy ! Component: 100 - total flux cleaned = 0.00509965 Jy ! Component: 150 - total flux cleaned = 0.00603148 Jy ! Component: 200 - total flux cleaned = 0.00663155 Jy ! Total flux subtracted in 200 components = 0.00663155 Jy ! Clean residual min=-0.002470 max=0.003690 Jy/beam ! Clean residual mean=0.000642 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.648374 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.648374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161929Jy sigma=0.001389 ! Fit after self-cal, rms=0.161947Jy sigma=0.001389 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161947Jy sigma=0.001389 ! Fit after self-cal, rms=0.159395Jy sigma=0.001361 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=3.25 mas, bpa=-21.02 degrees ! Estimated noise=297.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966 Jy ! Component: 100 - total flux cleaned = -0.00141736 Jy ! Component: 150 - total flux cleaned = -0.00186335 Jy ! Component: 200 - total flux cleaned = -0.00232217 Jy ! Total flux subtracted in 200 components = -0.00232217 Jy ! Clean residual min=-0.001686 max=0.002333 Jy/beam ! Clean residual mean=0.000440 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.646051 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.646052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159277Jy sigma=0.001360 ! Fit after self-cal, rms=0.159264Jy sigma=0.001360 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167242 Jy ! Component: 100 - total flux cleaned = 0.00168355 Jy ! Component: 150 - total flux cleaned = 0.00162828 Jy ! Component: 200 - total flux cleaned = 0.0015757 Jy ! Total flux subtracted in 200 components = 0.0015757 Jy ! Clean residual min=-0.001543 max=0.002263 Jy/beam ! Clean residual mean=0.000421 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.647627 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.647627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159182Jy sigma=0.001360 ! Fit after self-cal, rms=0.159180Jy sigma=0.001360 ! Inverting map ! Added new window around map position (15, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179882 Jy ! Component: 100 - total flux cleaned = 0.00201056 Jy ! Component: 150 - total flux cleaned = 0.00215593 Jy ! Component: 200 - total flux cleaned = 0.00224587 Jy ! Total flux subtracted in 200 components = 0.00224587 Jy ! Clean residual min=-0.001471 max=0.002127 Jy/beam ! Clean residual mean=0.000393 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.649873 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 103 components and 0.649873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159117Jy sigma=0.001359 ! Fit after self-cal, rms=0.159117Jy sigma=0.001359 ! Inverting map ! Added new window around map position (9.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011167 Jy ! Component: 100 - total flux cleaned = 0.000905838 Jy ! Component: 150 - total flux cleaned = 0.000858998 Jy ! Component: 200 - total flux cleaned = 0.000946741 Jy ! Total flux subtracted in 200 components = 0.000946741 Jy ! Clean residual min=-0.001545 max=0.002088 Jy/beam ! Clean residual mean=0.000383 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.65082 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 113 components and 0.65082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159063Jy sigma=0.001359 ! Fit after self-cal, rms=0.159061Jy sigma=0.001359 ! Inverting map ! Added new window around map position (44, -16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188099 Jy ! Component: 100 - total flux cleaned = 0.0023345 Jy ! Component: 150 - total flux cleaned = 0.00250636 Jy ! Component: 200 - total flux cleaned = 0.00262686 Jy ! Total flux subtracted in 200 components = 0.00262686 Jy ! Clean residual min=-0.001411 max=0.002013 Jy/beam ! Clean residual mean=0.000359 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.653447 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.653447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159008Jy sigma=0.001359 ! Fit after self-cal, rms=0.159008Jy sigma=0.001359 ! Inverting map ! Added new window around map position (-40, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017688 Jy ! Component: 100 - total flux cleaned = 0.00229083 Jy ! Component: 150 - total flux cleaned = 0.00244852 Jy ! Component: 200 - total flux cleaned = 0.00256208 Jy ! Total flux subtracted in 200 components = 0.00256208 Jy ! Clean residual min=-0.001470 max=0.001945 Jy/beam ! Clean residual mean=0.000336 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.656009 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 137 components and 0.656009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158967Jy sigma=0.001358 ! Fit after self-cal, rms=0.158968Jy sigma=0.001358 ! Inverting map ! Added new window around map position (-61, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174561 Jy ! Component: 100 - total flux cleaned = 0.00204601 Jy ! Component: 150 - total flux cleaned = 0.00223479 Jy ! Component: 200 - total flux cleaned = 0.00230644 Jy ! Total flux subtracted in 200 components = 0.00230644 Jy ! Clean residual min=-0.001588 max=0.001880 Jy/beam ! Clean residual mean=0.000311 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.658315 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 149 components and 0.658315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158932Jy sigma=0.001358 ! Fit after self-cal, rms=0.158929Jy sigma=0.001358 ! Inverting map ! Added new window around map position (50, -50.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168588 Jy ! Component: 100 - total flux cleaned = 0.0021906 Jy ! Component: 150 - total flux cleaned = 0.00229982 Jy ! Component: 200 - total flux cleaned = 0.00236929 Jy ! Total flux subtracted in 200 components = 0.00236929 Jy ! Clean residual min=-0.001562 max=0.001867 Jy/beam ! Clean residual mean=0.000291 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.660685 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 162 components and 0.660685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158898Jy sigma=0.001358 ! Fit after self-cal, rms=0.158897Jy sigma=0.001358 ! Inverting map ! Added new window around map position (-4.5, 60.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175403 Jy ! Component: 100 - total flux cleaned = 0.00217045 Jy ! Component: 150 - total flux cleaned = 0.00227962 Jy ! Component: 200 - total flux cleaned = 0.00238358 Jy ! Total flux subtracted in 200 components = 0.00238358 Jy ! Clean residual min=-0.001630 max=0.001825 Jy/beam ! Clean residual mean=0.000274 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.663068 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 177 components and 0.663068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158855Jy sigma=0.001358 ! Fit after self-cal, rms=0.158854Jy sigma=0.001357 ! Inverting map ! Added new window around map position (61, 46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010865 Jy ! Component: 100 - total flux cleaned = 0.00154363 Jy ! Component: 150 - total flux cleaned = 0.00175348 Jy ! Component: 200 - total flux cleaned = 0.00185365 Jy ! Total flux subtracted in 200 components = 0.00185365 Jy ! Clean residual min=-0.001588 max=0.001806 Jy/beam ! Clean residual mean=0.000257 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.664922 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 193 components and 0.664922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158821Jy sigma=0.001357 ! Fit after self-cal, rms=0.158820Jy sigma=0.001357 ! Inverting map ! Added new window around map position (20.5, 54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135354 Jy ! Component: 100 - total flux cleaned = 0.00131328 Jy ! Component: 150 - total flux cleaned = 0.00134712 Jy ! Component: 200 - total flux cleaned = 0.00137958 Jy ! Total flux subtracted in 200 components = 0.00137958 Jy ! Clean residual min=-0.001656 max=0.001760 Jy/beam ! Clean residual mean=0.000244 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.666301 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 214 components and 0.666301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158785Jy sigma=0.001357 ! Fit after self-cal, rms=0.158786Jy sigma=0.001357 ! Inverting map ! Added new window around map position (9.5, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137613 Jy ! Component: 100 - total flux cleaned = 0.00170131 Jy ! Component: 150 - total flux cleaned = 0.00170082 Jy ! Component: 200 - total flux cleaned = 0.00176518 Jy ! Total flux subtracted in 200 components = 0.00176518 Jy ! Clean residual min=-0.001720 max=0.001654 Jy/beam ! Clean residual mean=0.000226 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.668066 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 224 components and 0.668066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158753Jy sigma=0.001357 ! Fit after self-cal, rms=0.158753Jy sigma=0.001357 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158753Jy sigma=0.001357 ! Fit after self-cal, rms=0.151981Jy sigma=0.001338 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=3.258 mas, bpa=-20.64 degrees ! Estimated noise=297.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016393 Jy ! Component: 100 - total flux cleaned = -0.00226895 Jy ! Component: 150 - total flux cleaned = -0.00288175 Jy ! Component: 200 - total flux cleaned = -0.00349326 Jy ! Total flux subtracted in 200 components = -0.00349326 Jy ! Clean residual min=-0.001834 max=0.001259 Jy/beam ! Clean residual mean=-0.000043 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.664573 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 235 components and 0.664573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151936Jy sigma=0.001338 ! Fit after self-cal, rms=0.151928Jy sigma=0.001338 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000712952 Jy ! Component: 100 - total flux cleaned = -0.00133415 Jy ! Component: 150 - total flux cleaned = -0.00195996 Jy ! Component: 200 - total flux cleaned = -0.00247954 Jy ! Total flux subtracted in 200 components = -0.00247954 Jy ! Clean residual min=-0.001768 max=0.001241 Jy/beam ! Clean residual mean=-0.000016 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.662094 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 246 components and 0.662093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151908Jy sigma=0.001338 ! Fit after self-cal, rms=0.151908Jy sigma=0.001338 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151908Jy sigma=0.001338 ! Fit after self-cal, rms=0.152031Jy sigma=0.001337 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=9.533 mas, bpa=-34.37 degrees ! Estimated noise=445.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177945 Jy ! Component: 100 - total flux cleaned = -0.00304379 Jy ! Component: 150 - total flux cleaned = -0.00405394 Jy ! Component: 200 - total flux cleaned = -0.00491154 Jy ! Total flux subtracted in 200 components = -0.00491154 Jy ! Clean residual min=-0.001514 max=0.001551 Jy/beam ! Clean residual mean=-0.000100 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.657182 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 275 components and 0.657182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152024Jy sigma=0.001337 ! Fit after self-cal, rms=0.152028Jy sigma=0.001337 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000808269 Jy ! Component: 100 - total flux cleaned = -0.00129867 Jy ! Component: 150 - total flux cleaned = -0.00173773 Jy ! Component: 200 - total flux cleaned = -0.00211232 Jy ! Total flux subtracted in 200 components = -0.00211232 Jy ! Clean residual min=-0.001433 max=0.001565 Jy/beam ! Clean residual mean=-0.000025 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.65507 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 292 components and 0.65507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152028Jy sigma=0.001337 ! Fit after self-cal, rms=0.152027Jy sigma=0.001337 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=3.262 mas, bpa=-20.48 degrees ! Estimated noise=297.263 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.266 x 3.262 at -20.48 degrees (North through East) ! Clean map min=-0.0025017 max=0.57207 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152027Jy sigma=0.001337 ! Fit after self-cal, rms=0.145946Jy sigma=0.001241 ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=3.262 mas, bpa=-20.47 degrees ! Estimated noise=297.111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000847504 Jy ! Component: 100 - total flux cleaned = -0.00105281 Jy ! Component: 150 - total flux cleaned = -0.00127305 Jy ! Component: 200 - total flux cleaned = -0.00164553 Jy ! Total flux subtracted in 200 components = -0.00164553 Jy ! Clean residual min=-0.001427 max=0.001303 Jy/beam ! Clean residual mean=-0.000028 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.653424 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 305 components and 0.653424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145916Jy sigma=0.001240 ! Fit after self-cal, rms=0.145915Jy sigma=0.001240 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291413 Jy ! Component: 100 - total flux cleaned = -0.00059924 Jy ! Component: 150 - total flux cleaned = -0.000894492 Jy ! Component: 200 - total flux cleaned = -0.00117833 Jy ! Total flux subtracted in 200 components = -0.00117833 Jy ! Clean residual min=-0.001392 max=0.001313 Jy/beam ! Clean residual mean=-0.000016 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.652246 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 317 components and 0.652246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145901Jy sigma=0.001240 ! Fit after self-cal, rms=0.145901Jy sigma=0.001240 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145901Jy sigma=0.001240 ! Fit after self-cal, rms=0.146010Jy sigma=0.001240 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=2.541 mas, bpa=-44.72 degrees ! Estimated noise=592.319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438204 Jy ! Component: 100 - total flux cleaned = 0.539703 Jy ! Component: 150 - total flux cleaned = 0.581539 Jy ! Component: 200 - total flux cleaned = 0.602324 Jy ! Total flux subtracted in 200 components = 0.602324 Jy ! Clean residual min=-0.003350 max=0.010079 Jy/beam ! Clean residual mean=0.000047 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.602324 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.602324 Jy ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=3.265 mas, bpa=-20.33 degrees ! Estimated noise=296.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156066 Jy ! Component: 100 - total flux cleaned = 0.0233917 Jy ! Component: 150 - total flux cleaned = 0.027739 Jy ! Component: 200 - total flux cleaned = 0.0307483 Jy ! Total flux subtracted in 200 components = 0.0307483 Jy ! Clean residual min=-0.001558 max=0.002048 Jy/beam ! Clean residual mean=0.000164 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.633072 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.633072 Jy ! Inverting map ! Added new window around map position (-3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252635 Jy ! Component: 100 - total flux cleaned = 0.00430545 Jy ! Component: 150 - total flux cleaned = 0.00600145 Jy ! Component: 200 - total flux cleaned = 0.00755748 Jy ! Total flux subtracted in 200 components = 0.00755748 Jy ! Clean residual min=-0.001445 max=0.001574 Jy/beam ! Clean residual mean=0.000081 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.64063 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 64 components and 0.64063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.225 mas, bmaj=9.538 mas, bpa=-34.22 degrees ! Estimated noise=444.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245584 Jy ! Component: 100 - total flux cleaned = 0.00424701 Jy ! Component: 150 - total flux cleaned = 0.00512648 Jy ! Component: 200 - total flux cleaned = 0.00583239 Jy ! Total flux subtracted in 200 components = 0.00583239 Jy ! Clean residual min=-0.001513 max=0.001635 Jy/beam ! Clean residual mean=0.000073 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.646462 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000528685 Jy ! Component: 100 - total flux cleaned = 0.000956543 Jy ! Component: 150 - total flux cleaned = 0.00134089 Jy ! Component: 200 - total flux cleaned = 0.0016587 Jy ! Total flux subtracted in 200 components = 0.0016587 Jy ! Clean residual min=-0.001453 max=0.001536 Jy/beam ! Clean residual mean=0.000011 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.648121 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 119 components and 0.648121 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=3.265 mas, bpa=-20.33 degrees ! Estimated noise=296.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358428 Jy ! Component: 100 - total flux cleaned = 0.000806825 Jy ! Component: 150 - total flux cleaned = 0.00102066 Jy ! Component: 200 - total flux cleaned = 0.00132612 Jy ! Total flux subtracted in 200 components = 0.00132612 Jy ! Clean residual min=-0.001484 max=0.001413 Jy/beam ! Clean residual mean=-0.000008 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.649447 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 138 components and 0.649447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146162Jy sigma=0.001242 ! Fit after self-cal, rms=0.146133Jy sigma=0.001241 wmodel J1058+8114_S_2010_10_13_pus_map.mod ! Writing 138 model components to file: J1058+8114_S_2010_10_13_pus_map.mod wobs J1058+8114_S_2010_10_13_pus_uvs.fits ! Writing UV FITS file: J1058+8114_S_2010_10_13_pus_uvs.fits wwins J1058+8114_S_2010_10_13_pus_map.win ! wwins: Wrote 15 windows to J1058+8114_S_2010_10_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330664 Jy ! Component: 100 - total flux cleaned = -0.000404209 Jy ! Component: 150 - total flux cleaned = -0.000474783 Jy ! Component: 200 - total flux cleaned = -0.000635095 Jy ! Component: 250 - total flux cleaned = -0.000724766 Jy ! Component: 300 - total flux cleaned = -0.000768951 Jy ! Component: 350 - total flux cleaned = -0.000747219 Jy ! Component: 400 - total flux cleaned = -0.000768571 Jy ! Component: 450 - total flux cleaned = -0.000789473 Jy ! Component: 500 - total flux cleaned = -0.000768345 Jy ! Component: 550 - total flux cleaned = -0.000727157 Jy ! Component: 600 - total flux cleaned = -0.000686658 Jy ! Component: 650 - total flux cleaned = -0.0006666 Jy ! Component: 700 - total flux cleaned = -0.000626853 Jy ! Component: 750 - total flux cleaned = -0.000587622 Jy ! Component: 800 - total flux cleaned = -0.000607172 Jy ! Component: 850 - total flux cleaned = -0.000607241 Jy ! Component: 900 - total flux cleaned = -0.000626301 Jy ! Component: 950 - total flux cleaned = -0.000645139 Jy ! Component: 1000 - total flux cleaned = -0.000663886 Jy ! Component: 1050 - total flux cleaned = -0.000663803 Jy ! Component: 1100 - total flux cleaned = -0.000645411 Jy ! Component: 1150 - total flux cleaned = -0.000663551 Jy ! Component: 1200 - total flux cleaned = -0.00062719 Jy ! Component: 1250 - total flux cleaned = -0.000645275 Jy ! Component: 1300 - total flux cleaned = -0.000645177 Jy ! Component: 1350 - total flux cleaned = -0.00060974 Jy ! Component: 1400 - total flux cleaned = -0.000627464 Jy ! Component: 1450 - total flux cleaned = -0.000592491 Jy ! Component: 1500 - total flux cleaned = -0.000592623 Jy ! Component: 1550 - total flux cleaned = -0.000575354 Jy ! Component: 1600 - total flux cleaned = -0.000558249 Jy ! Component: 1650 - total flux cleaned = -0.000558231 Jy ! Component: 1700 - total flux cleaned = -0.000558184 Jy ! Component: 1750 - total flux cleaned = -0.000524382 Jy ! Component: 1800 - total flux cleaned = -0.000507605 Jy ! Component: 1850 - total flux cleaned = -0.000507716 Jy ! Component: 1900 - total flux cleaned = -0.000507714 Jy ! Component: 1950 - total flux cleaned = -0.000474758 Jy ! Component: 2000 - total flux cleaned = -0.000491304 Jy ! Total flux subtracted in 2048 components = -0.000507627 Jy ! Clean residual min=-0.001064 max=0.000999 Jy/beam ! Clean residual mean=-0.000003 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.64894 Jy keep ! Adding 154 model components to the UV plane model. ! The established model now contains 291 components and 0.648939 Jy ![Exited script file: muppet] wmap "J1058+8114_S_2010_10_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.265 x 3.265 at -20.33 degrees (North through East) ! Clean map min=-0.0015338 max=0.57196 Jy/beam ! Writing clean map to FITS file: J1058+8114_S_2010_10_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.571957 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0003022 device "J1058+8114_S_2010_10_13_pus\_map.eps/VPS" ! Attempting to open device: 'J1058+8114_S_2010_10_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.158508 0.158508 0.317017 0.634034 1.26807 2.53614 5.07227 10.1445 20.2891 40.5782 81.1563 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.571 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.265 x 3.265 at -20.33 degrees (North through East) ! Clean map min=-0.0015338 max=0.57196 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1058+8114_S_2010_10_13_pus\_map.gif/vgif" ! Attempting to open device: 'J1058+8114_S_2010_10_13_pus_map.gif/vgif' mapplot cln