! Started logfile: J0659+0813_S_2010_10_13_pus_uvs.log on Sun Feb 27 23:58:23 2011
obs J0659+0813_S_2010_10_13_pus_uva.fits
! Reading UV FITS file: J0659+0813_S_2010_10_13_pus_uva.fits
! AN table 1: 75 integrations on 105 of 105 possible baselines.
! AN table 2: 107 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.151125 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0659+0813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23696e+09        8e+06          1        8e+06
!  02        2  2.26696e+09        8e+06          1        8e+06
!  03        3  2.35696e+09        8e+06          1        8e+06
!  04        4  2.37696e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3545 lines of history.
! 
! Reading 11552 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0659+0813_S_2010_10_13_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 839 telescope corrections were flagged in sub-array 1.
!  A total of 1077 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 839 telescope corrections were flagged in sub-array 1.
!  A total of 1077 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 839 telescope corrections were flagged in sub-array 1.
!  A total of 1077 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 839 telescope corrections were flagged in sub-array 1.
!  A total of 1077 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.518595Jy  sigma=0.005541
! Fit after  self-cal, rms=0.492694Jy  sigma=0.005289
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.563 mas, bmaj=9.136 mas, bpa=-18.48 degrees
! Estimated noise=963.156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.397379 Jy
! Component: 100  -  total flux cleaned = 0.503821 Jy
! Total flux subtracted in 100 components = 0.503821 Jy
! Clean residual min=-0.015043 max=0.046198 Jy/beam
! Clean residual mean=0.000014 rms=0.005646 Jy/beam
! Combined flux in latest and established models = 0.503821 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.503821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189265Jy  sigma=0.002039
! Fit after  self-cal, rms=0.189023Jy  sigma=0.002036
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0517496 Jy
! Component: 100  -  total flux cleaned = 0.0788361 Jy
! Total flux subtracted in 100 components = 0.0788361 Jy
! Clean residual min=-0.014188 max=0.043061 Jy/beam
! Clean residual mean=0.000015 rms=0.004219 Jy/beam
! Combined flux in latest and established models = 0.582658 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.582658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166388Jy  sigma=0.001709
! Fit after  self-cal, rms=0.166075Jy  sigma=0.001707
! Inverting map 
! Added new window around map position (-6.5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0363014 Jy
! Component: 100  -  total flux cleaned = 0.054737 Jy
! Total flux subtracted in 100 components = 0.054737 Jy
! Clean residual min=-0.012165 max=0.017674 Jy/beam
! Clean residual mean=-0.000004 rms=0.003189 Jy/beam
! Combined flux in latest and established models = 0.637395 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.637395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153937Jy  sigma=0.001528
! Fit after  self-cal, rms=0.153042Jy  sigma=0.001518
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=10.59 mas, bpa=-19.29 degrees
! Estimated noise=605.525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0318043 Jy
! Component: 100  -  total flux cleaned = 0.0503074 Jy
! Component: 150  -  total flux cleaned = 0.0621472 Jy
! Component: 200  -  total flux cleaned = 0.070091 Jy
! Total flux subtracted in 200 components = 0.070091 Jy
! Clean residual min=-0.008157 max=0.020966 Jy/beam
! Clean residual mean=0.000171 rms=0.003832 Jy/beam
! Combined flux in latest and established models = 0.707486 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 75 components and 0.707485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146622Jy  sigma=0.001418
! Fit after  self-cal, rms=0.146049Jy  sigma=0.001411
! Inverting map 
! Added new window around map position (-14.5, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205717 Jy
! Component: 100  -  total flux cleaned = 0.030933 Jy
! Component: 150  -  total flux cleaned = 0.0376947 Jy
! Component: 200  -  total flux cleaned = 0.0423943 Jy
! Total flux subtracted in 200 components = 0.0423943 Jy
! Clean residual min=-0.006484 max=0.014007 Jy/beam
! Clean residual mean=0.000063 rms=0.002124 Jy/beam
! Combined flux in latest and established models = 0.74988 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 109 components and 0.74988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143458Jy  sigma=0.001369
! Fit after  self-cal, rms=0.143107Jy  sigma=0.001365
! Inverting map 
! Added new window around map position (-25, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132499 Jy
! Component: 100  -  total flux cleaned = 0.0188502 Jy
! Component: 150  -  total flux cleaned = 0.0193822 Jy
! Component: 200  -  total flux cleaned = 0.0193925 Jy
! Total flux subtracted in 200 components = 0.0193925 Jy
! Clean residual min=-0.005964 max=0.006196 Jy/beam
! Clean residual mean=0.000017 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.769272 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 141 components and 0.769272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141958Jy  sigma=0.001348
! Fit after  self-cal, rms=0.141805Jy  sigma=0.001346
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HH        1.00*    HN        1.09     
!   KB        1.00*    KK        1.00     KP        0.98     LA        1.04     
!   MK        0.96     NL        1.02     NY        1.06     OV        0.96     
!   PT        0.99     SC        1.19     TS        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.02     HH        1.00*    HN        1.02     
!   KB        1.00*    KK        1.01     KP        0.96     LA        1.02     
!   MK        0.92     NL        0.98     NY        1.05     OV        0.94     
!   PT        0.98     SC        1.00*    TS        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HH        1.00*    HN        1.06     
!   KB        1.00*    KK        1.00     KP        1.00     LA        0.99     
!   MK        0.99     NL        1.02     NY        1.00     OV        1.02     
!   PT        1.00     SC        1.08     TS        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.02     HH        1.00*    HN        1.04     
!   KB        1.00*    KK        0.96     KP        0.99     LA        1.00     
!   MK        0.98     NL        1.00     NY        1.07     OV        1.01     
!   PT        0.99     SC        1.00*    TS        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HH        1.00*    HN        1.07     
!   KB        1.00*    KK        0.97     KP        1.03     LA        1.01     
!   MK        0.94     NL        1.01     NY        0.99     OV        1.05     
!   PT        1.01     SC        1.10     TS        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.01     HH        1.00*    HN        1.04     
!   KB        1.00*    KK        1.01     KP        1.02     LA        0.99     
!   MK        0.95     NL        1.00     NY        1.08     OV        0.99     
!   PT        1.00     SC        1.00*    TS        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.01     HH        1.00*    HN        1.11     
!   KB        1.00*    KK        1.05     KP        1.01     LA        0.97     
!   MK        1.02     NL        0.99     NY        0.95     OV        0.99     
!   PT        1.00     SC        1.18     TS        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.04     HH        1.00*    HN        1.05     
!   KB        1.00*    KK        0.99     KP        1.00     LA        0.98     
!   MK        0.99     NL        0.99     NY        1.05     OV        0.99     
!   PT        1.00     SC        1.00*    TS        1.00*    
! 
! 
! Fit before self-cal, rms=0.141805Jy  sigma=0.001346
! Fit after  self-cal, rms=0.141817Jy  sigma=0.001308
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=10.8 mas, bpa=-19.48 degrees
! Estimated noise=607.027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00365669 Jy
! Component: 100  -  total flux cleaned = 0.00364923 Jy
! Component: 150  -  total flux cleaned = 0.00328538 Jy
! Component: 200  -  total flux cleaned = 0.00306964 Jy
! Total flux subtracted in 200 components = 0.00306964 Jy
! Clean residual min=-0.004858 max=0.004093 Jy/beam
! Clean residual mean=0.000007 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.772342 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 174 components and 0.772342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141571Jy  sigma=0.001304
! Fit after  self-cal, rms=0.141620Jy  sigma=0.001304
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141620Jy  sigma=0.001304
! Fit after  self-cal, rms=0.140543Jy  sigma=0.001281
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=10.82 mas, bpa=-19.5 degrees
! Estimated noise=607.353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151619 Jy
! Component: 100  -  total flux cleaned = 0.00191899 Jy
! Component: 150  -  total flux cleaned = 0.00216598 Jy
! Component: 200  -  total flux cleaned = 0.00216437 Jy
! Total flux subtracted in 200 components = 0.00216437 Jy
! Clean residual min=-0.003267 max=0.002836 Jy/beam
! Clean residual mean=-0.000022 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.774506 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 197 components and 0.774506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140415Jy  sigma=0.001280
! Fit after  self-cal, rms=0.140405Jy  sigma=0.001279
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.2094e-05 Jy
! Component: 100  -  total flux cleaned = 0.000237686 Jy
! Component: 150  -  total flux cleaned = 0.000303329 Jy
! Component: 200  -  total flux cleaned = 0.00030438 Jy
! Total flux subtracted in 200 components = 0.00030438 Jy
! Clean residual min=-0.003182 max=0.002788 Jy/beam
! Clean residual mean=-0.000024 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.774811 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 212 components and 0.774811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140337Jy  sigma=0.001279
! Fit after  self-cal, rms=0.140328Jy  sigma=0.001279
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140328Jy  sigma=0.001279
! Fit after  self-cal, rms=0.139997Jy  sigma=0.001274
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=10.82 mas, bpa=-19.51 degrees
! Estimated noise=606.666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128272 Jy
! Component: 100  -  total flux cleaned = 0.00155983 Jy
! Component: 150  -  total flux cleaned = 0.00174313 Jy
! Component: 200  -  total flux cleaned = 0.00185514 Jy
! Total flux subtracted in 200 components = 0.00185514 Jy
! Clean residual min=-0.002754 max=0.002694 Jy/beam
! Clean residual mean=-0.000015 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.776666 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 229 components and 0.776666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139925Jy  sigma=0.001273
! Fit after  self-cal, rms=0.139920Jy  sigma=0.001273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201875 Jy
! Component: 100  -  total flux cleaned = 0.000413117 Jy
! Component: 150  -  total flux cleaned = 0.000413047 Jy
! Component: 200  -  total flux cleaned = 0.000366319 Jy
! Total flux subtracted in 200 components = 0.000366319 Jy
! Clean residual min=-0.002715 max=0.002642 Jy/beam
! Clean residual mean=-0.000016 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.777032 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 240 components and 0.777032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139877Jy  sigma=0.001272
! Fit after  self-cal, rms=0.139873Jy  sigma=0.001272
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139873Jy  sigma=0.001272
! Fit after  self-cal, rms=0.139881Jy  sigma=0.001272
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.854 mas, bmaj=12.46 mas, bpa=-18.07 degrees
! Estimated noise=701.667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000690928 Jy
! Component: 100  -  total flux cleaned = 0.000795543 Jy
! Component: 150  -  total flux cleaned = 0.000670869 Jy
! Component: 200  -  total flux cleaned = 0.000635916 Jy
! Total flux subtracted in 200 components = 0.000635916 Jy
! Clean residual min=-0.002711 max=0.001904 Jy/beam
! Clean residual mean=-0.000023 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.777668 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 267 components and 0.777668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139857Jy  sigma=0.001272
! Fit after  self-cal, rms=0.139853Jy  sigma=0.001272
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000300307 Jy
! Component: 100  -  total flux cleaned = 0.000301716 Jy
! Component: 150  -  total flux cleaned = 0.000301702 Jy
! Component: 200  -  total flux cleaned = 0.000242891 Jy
! Total flux subtracted in 200 components = 0.000242891 Jy
! Clean residual min=-0.002635 max=0.001909 Jy/beam
! Clean residual mean=-0.000025 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.77791 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 284 components and 0.77791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139842Jy  sigma=0.001272
! Fit after  self-cal, rms=0.139841Jy  sigma=0.001272
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=10.83 mas, bpa=-19.51 degrees
! Estimated noise=606.513 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.29 x 10.83 at -19.51 degrees (North through East)
! Clean map  min=-0.0025896  max=0.53998 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139841Jy  sigma=0.001272
! Fit after  self-cal, rms=0.136466Jy  sigma=0.001132
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=10.83 mas, bpa=-19.51 degrees
! Estimated noise=606.448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.22431e-05 Jy
! Component: 100  -  total flux cleaned = -6.23023e-05 Jy
! Component: 150  -  total flux cleaned = -6.22143e-05 Jy
! Component: 200  -  total flux cleaned = -6.23748e-05 Jy
! Total flux subtracted in 200 components = -6.23748e-05 Jy
! Clean residual min=-0.002479 max=0.002395 Jy/beam
! Clean residual mean=-0.000006 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.777848 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 299 components and 0.777848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136427Jy  sigma=0.001132
! Fit after  self-cal, rms=0.136425Jy  sigma=0.001131
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.97299e-05 Jy
! Component: 100  -  total flux cleaned = -4.73659e-05 Jy
! Component: 150  -  total flux cleaned = -8.95263e-06 Jy
! Component: 200  -  total flux cleaned = -4.49962e-05 Jy
! Total flux subtracted in 200 components = -4.49962e-05 Jy
! Clean residual min=-0.002459 max=0.002347 Jy/beam
! Clean residual mean=-0.000006 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.777803 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 307 components and 0.777803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136399Jy  sigma=0.001131
! Fit after  self-cal, rms=0.136398Jy  sigma=0.001131
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136398Jy  sigma=0.001131
! Fit after  self-cal, rms=0.136446Jy  sigma=0.001131
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.575 mas, bmaj=9.295 mas, bpa=-18.71 degrees
! Estimated noise=969.886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.397431 Jy
! Component: 100  -  total flux cleaned = 0.50477 Jy
! Component: 150  -  total flux cleaned = 0.563628 Jy
! Component: 200  -  total flux cleaned = 0.600479 Jy
! Total flux subtracted in 200 components = 0.600479 Jy
! Clean residual min=-0.009200 max=0.019829 Jy/beam
! Clean residual mean=-0.000014 rms=0.003157 Jy/beam
! Combined flux in latest and established models = 0.600479 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.600479 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=10.83 mas, bpa=-19.51 degrees
! Estimated noise=606.315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501422 Jy
! Component: 100  -  total flux cleaned = 0.082724 Jy
! Component: 150  -  total flux cleaned = 0.105951 Jy
! Component: 200  -  total flux cleaned = 0.123019 Jy
! Total flux subtracted in 200 components = 0.123019 Jy
! Clean residual min=-0.005659 max=0.009741 Jy/beam
! Clean residual mean=0.000164 rms=0.002758 Jy/beam
! Combined flux in latest and established models = 0.723498 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 80 components and 0.723498 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.847 mas, bmaj=12.46 mas, bpa=-18.04 degrees
! Estimated noise=701.714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191469 Jy
! Component: 100  -  total flux cleaned = 0.0308186 Jy
! Component: 150  -  total flux cleaned = 0.038267 Jy
! Component: 200  -  total flux cleaned = 0.0432997 Jy
! Total flux subtracted in 200 components = 0.0432997 Jy
! Clean residual min=-0.003136 max=0.003162 Jy/beam
! Clean residual mean=0.000049 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.766798 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354997 Jy
! Component: 100  -  total flux cleaned = 0.00608824 Jy
! Component: 150  -  total flux cleaned = 0.00792329 Jy
! Component: 200  -  total flux cleaned = 0.00926659 Jy
! Total flux subtracted in 200 components = 0.00926659 Jy
! Clean residual min=-0.002517 max=0.002102 Jy/beam
! Clean residual mean=-0.000007 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.776064 Jy
! Adding 155 model components to the UV plane model.
! The established model now contains 225 components and 0.776064 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=10.83 mas, bpa=-19.51 degrees
! Estimated noise=606.315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450008 Jy
! Component: 100  -  total flux cleaned = 0.000651305 Jy
! Component: 150  -  total flux cleaned = 0.000747607 Jy
! Component: 200  -  total flux cleaned = 0.000827617 Jy
! Total flux subtracted in 200 components = 0.000827617 Jy
! Clean residual min=-0.002535 max=0.002552 Jy/beam
! Clean residual mean=-0.000005 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.776892 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 241 components and 0.776892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136686Jy  sigma=0.001133
! Fit after  self-cal, rms=0.136642Jy  sigma=0.001132
wmodel J0659+0813_S_2010_10_13_pus_map.mod
! Writing 241 model components to file: J0659+0813_S_2010_10_13_pus_map.mod
wobs J0659+0813_S_2010_10_13_pus_uvs.fits
! Writing UV FITS file: J0659+0813_S_2010_10_13_pus_uvs.fits
wwins J0659+0813_S_2010_10_13_pus_map.win
! wwins: Wrote 4 windows to J0659+0813_S_2010_10_13_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.58917e-05 Jy
! Component: 100  -  total flux cleaned = 0.000404916 Jy
! Component: 150  -  total flux cleaned = 0.000746875 Jy
! Component: 200  -  total flux cleaned = 0.000952363 Jy
! Component: 250  -  total flux cleaned = 0.00107236 Jy
! Component: 300  -  total flux cleaned = 0.000955769 Jy
! Component: 350  -  total flux cleaned = 0.000956202 Jy
! Component: 400  -  total flux cleaned = 0.000956532 Jy
! Component: 450  -  total flux cleaned = 0.00106623 Jy
! Component: 500  -  total flux cleaned = 0.00110209 Jy
! Component: 550  -  total flux cleaned = 0.00120747 Jy
! Component: 600  -  total flux cleaned = 0.00127668 Jy
! Component: 650  -  total flux cleaned = 0.00137841 Jy
! Component: 700  -  total flux cleaned = 0.00144504 Jy
! Component: 750  -  total flux cleaned = 0.0014781 Jy
! Component: 800  -  total flux cleaned = 0.00160847 Jy
! Component: 850  -  total flux cleaned = 0.00170486 Jy
! Component: 900  -  total flux cleaned = 0.0018941 Jy
! Component: 950  -  total flux cleaned = 0.00189364 Jy
! Component: 1000  -  total flux cleaned = 0.00198647 Jy
! Component: 1050  -  total flux cleaned = 0.0020478 Jy
! Component: 1100  -  total flux cleaned = 0.00204826 Jy
! Component: 1150  -  total flux cleaned = 0.00204873 Jy
! Component: 1200  -  total flux cleaned = 0.00216661 Jy
! Component: 1250  -  total flux cleaned = 0.00219558 Jy
! Component: 1300  -  total flux cleaned = 0.00216662 Jy
! Component: 1350  -  total flux cleaned = 0.00213817 Jy
! Component: 1400  -  total flux cleaned = 0.00205362 Jy
! Component: 1450  -  total flux cleaned = 0.00210973 Jy
! Component: 1500  -  total flux cleaned = 0.00211004 Jy
! Component: 1550  -  total flux cleaned = 0.00213778 Jy
! Component: 1600  -  total flux cleaned = 0.00221984 Jy
! Component: 1650  -  total flux cleaned = 0.002274 Jy
! Component: 1700  -  total flux cleaned = 0.0023008 Jy
! Component: 1750  -  total flux cleaned = 0.00232772 Jy
! Component: 1800  -  total flux cleaned = 0.00243381 Jy
! Component: 1850  -  total flux cleaned = 0.00238106 Jy
! Component: 1900  -  total flux cleaned = 0.00240732 Jy
! Component: 1950  -  total flux cleaned = 0.00243313 Jy
! Component: 2000  -  total flux cleaned = 0.00240732 Jy
! Total flux subtracted in 2048 components = 0.00243328 Jy
! Clean residual min=-0.001548 max=0.001530 Jy/beam
! Clean residual mean=-0.000013 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.779325 Jy
keep
! Adding 137 model components to the UV plane model.
! The established model now contains 378 components and 0.779325 Jy
![Exited script file: muppet]
wmap "J0659+0813_S_2010_10_13_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.29 x 10.83 at -19.51 degrees (North through East)
! Clean map  min=-0.0025021  max=0.54099 Jy/beam
! Writing clean map to FITS file: J0659+0813_S_2010_10_13_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.540994 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00053187 
device "J0659+0813_S_2010_10_13_pus\_map.eps/VPS"
! Attempting to open device: 'J0659+0813_S_2010_10_13_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.294941 0.294941 0.589882 1.17976 2.35953 4.71905 9.43811 18.8762 37.7524 75.5049
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.54 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.29 x 10.83 at -19.51 degrees (North through East)
! Clean map  min=-0.0025021  max=0.54099 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0659+0813_S_2010_10_13_pus\_map.gif/vgif"
! Attempting to open device: 'J0659+0813_S_2010_10_13_pus_map.gif/vgif'
mapplot cln