! Started logfile: J0609-1542_X_2010_10_13_pus_uvs.log on Mon Feb 28 17:39:49 2011 obs J0609-1542_X_2010_10_13_pus_uva.fits ! Reading UV FITS file: J0609-1542_X_2010_10_13_pus_uva.fits ! AN table 1: 9 integrations on 105 of 105 possible baselines. ! AN table 2: 90 integrations on 105 of 105 possible baselines. ! AN table 3: 46 integrations on 105 of 105 possible baselines. ! AN table 4: 37 integrations on 105 of 105 possible baselines. ! Apparent sampling: 0.146834 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0609-1542 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40996e+09 8e+06 1 8e+06 ! 02 2 8.47996e+09 8e+06 1 8e+06 ! 03 3 8.79496e+09 8e+06 1 8e+06 ! 04 4 8.89996e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 5978 lines of history. ! ! Reading 11224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0609-1542_X_2010_10_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! A total of 997 telescope corrections were flagged in sub-array 2. ! A total of 283 telescope corrections were flagged in sub-array 3. ! A total of 528 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! A total of 997 telescope corrections were flagged in sub-array 2. ! A total of 283 telescope corrections were flagged in sub-array 3. ! A total of 528 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! A total of 997 telescope corrections were flagged in sub-array 2. ! A total of 283 telescope corrections were flagged in sub-array 3. ! A total of 528 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! A total of 997 telescope corrections were flagged in sub-array 2. ! A total of 283 telescope corrections were flagged in sub-array 3. ! A total of 528 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=2.195345Jy sigma=0.026482 ! Fit after self-cal, rms=2.179457Jy sigma=0.026013 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 8.62% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.5617 mas, bmaj=1.068 mas, bpa=5.432 degrees ! Estimated noise=925.833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86764 Jy ! Component: 100 - total flux cleaned = 2.62846 Jy ! Total flux subtracted in 100 components = 2.62846 Jy ! Clean residual min=-0.106484 max=0.490062 Jy/beam ! Clean residual mean=0.001605 rms=0.043940 Jy/beam ! Combined flux in latest and established models = 2.62846 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.62846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.116965Jy sigma=0.013330 ! Fit after self-cal, rms=1.116546Jy sigma=0.013324 ! Inverting map ! Your choice of large map pixels excluded 8.62% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.494794 Jy ! Component: 100 - total flux cleaned = 0.799257 Jy ! Total flux subtracted in 100 components = 0.799257 Jy ! Clean residual min=-0.079904 max=0.234850 Jy/beam ! Clean residual mean=0.000448 rms=0.026769 Jy/beam ! Combined flux in latest and established models = 3.42772 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 3.42772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.773452Jy sigma=0.008838 ! Fit after self-cal, rms=0.763902Jy sigma=0.008750 ! Inverting map ! Your choice of large map pixels excluded 8.62% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216767 Jy ! Component: 100 - total flux cleaned = 0.3548 Jy ! Total flux subtracted in 100 components = 0.3548 Jy ! Clean residual min=-0.073597 max=0.131322 Jy/beam ! Clean residual mean=-0.000066 rms=0.020613 Jy/beam ! Combined flux in latest and established models = 3.78252 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 3.78252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677343Jy sigma=0.007513 ! Fit after self-cal, rms=0.675304Jy sigma=0.007493 ! Inverting map ! Your choice of large map pixels excluded 8.62% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 8.62% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.7905 mas, bmaj=1.553 mas, bpa=6.961 degrees ! Estimated noise=660.507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171013 Jy ! Component: 100 - total flux cleaned = 0.256362 Jy ! Component: 150 - total flux cleaned = 0.301638 Jy ! Component: 200 - total flux cleaned = 0.316028 Jy ! Total flux subtracted in 200 components = 0.316028 Jy ! Clean residual min=-0.097345 max=0.120628 Jy/beam ! Clean residual mean=-0.001795 rms=0.030168 Jy/beam ! Combined flux in latest and established models = 4.09855 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 4.09855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.643125Jy sigma=0.007034 ! Fit after self-cal, rms=0.641801Jy sigma=0.007014 ! Inverting map ! Your choice of large map pixels excluded 8.62% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! A total of 105 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.82 HH 0.90 HN 1.01 ! KB 1.00* KK 1.00* KP 0.98 LA 0.99 ! MK 1.00* NL 1.41 NY 1.00* OV 0.93 ! PT 0.97 SC 1.01 TS 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.81 HH 0.88 HN 1.00 ! KB 1.19 KK 0.96 KP 0.97 LA 0.98 ! MK 0.98 NL 0.99 NY 1.00* OV 0.96 ! PT 0.96 SC 0.99 TS 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! A total of 105 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.96 HH 0.91 HN 1.04 ! KB 1.00* KK 1.00* KP 0.97 LA 0.96 ! MK 1.00* NL 1.46 NY 1.00* OV 0.96 ! PT 1.00 SC 1.02 TS 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.95 HH 0.87 HN 1.02 ! KB 1.23 KK 1.00 KP 0.97 LA 0.95 ! MK 0.93 NL 1.04 NY 1.00* OV 0.98 ! PT 0.98 SC 1.01 TS 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! A total of 105 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.98 HH 0.94 HN 1.06 ! KB 1.00* KK 1.00* KP 0.99 LA 0.96 ! MK 1.00* NL 1.44 NY 1.00* OV 0.95 ! PT 1.05 SC 1.07 TS 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.96 HH 0.89 HN 1.05 ! KB 1.13 KK 1.00 KP 0.98 LA 0.94 ! MK 1.01 NL 0.99 NY 1.00* OV 0.98 ! PT 1.03 SC 1.04 TS 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! A total of 105 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00 HH 0.95 HN 1.05 ! KB 1.00* KK 1.00* KP 0.99 LA 1.03 ! MK 1.00* NL 1.51 NY 1.00* OV 0.99 ! PT 1.00 SC 1.06 TS 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.97 HH 0.91 HN 1.02 ! KB 1.10 KK 1.00 KP 0.98 LA 1.01 ! MK 1.01 NL 1.03 NY 1.00* OV 1.02 ! PT 0.99 SC 1.03 TS 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KK 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* TS 0.00* ! ! ! Fit before self-cal, rms=0.641801Jy sigma=0.007014 ! Fit after self-cal, rms=0.664640Jy sigma=0.005612 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8289 mas, bmaj=1.763 mas, bpa=8.582 degrees ! Estimated noise=673.831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0339611 Jy ! Component: 100 - total flux cleaned = -0.0374375 Jy ! Component: 150 - total flux cleaned = -0.0392316 Jy ! Component: 200 - total flux cleaned = -0.0407219 Jy ! Total flux subtracted in 200 components = -0.0407219 Jy ! Clean residual min=-0.094374 max=0.089014 Jy/beam ! Clean residual mean=-0.000343 rms=0.022678 Jy/beam ! Combined flux in latest and established models = 4.05783 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 4.05783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.661348Jy sigma=0.005546 ! Fit after self-cal, rms=0.661060Jy sigma=0.005542 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.661060Jy sigma=0.005542 ! Fit after self-cal, rms=1.026757Jy sigma=0.005657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8293 mas, bmaj=1.766 mas, bpa=8.474 degrees ! Estimated noise=689.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665104 Jy ! Component: 100 - total flux cleaned = 0.0732396 Jy ! Component: 150 - total flux cleaned = 0.0784641 Jy ! Component: 200 - total flux cleaned = 0.08065 Jy ! Total flux subtracted in 200 components = 0.08065 Jy ! Clean residual min=-0.109718 max=0.087322 Jy/beam ! Clean residual mean=0.000143 rms=0.024540 Jy/beam ! Combined flux in latest and established models = 4.13848 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 4.13848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.016283Jy sigma=0.005607 ! Fit after self-cal, rms=1.016348Jy sigma=0.005604 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00088251 Jy ! Component: 100 - total flux cleaned = -0.000890824 Jy ! Component: 150 - total flux cleaned = -0.000154045 Jy ! Component: 200 - total flux cleaned = -0.000134344 Jy ! Total flux subtracted in 200 components = -0.000134344 Jy ! Clean residual min=-0.111080 max=0.088554 Jy/beam ! Clean residual mean=0.000138 rms=0.024382 Jy/beam ! Combined flux in latest and established models = 4.13834 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 4.13834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.014360Jy sigma=0.005592 ! Fit after self-cal, rms=1.014387Jy sigma=0.005591 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.014387Jy sigma=0.005591 ! Fit after self-cal, rms=0.298368Jy sigma=0.001831 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8385 mas, bmaj=1.772 mas, bpa=8.751 degrees ! Estimated noise=690.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115545 Jy ! Component: 100 - total flux cleaned = 0.00942344 Jy ! Component: 150 - total flux cleaned = 0.00730943 Jy ! Component: 200 - total flux cleaned = 0.00592749 Jy ! Total flux subtracted in 200 components = 0.00592749 Jy ! Clean residual min=-0.021643 max=0.030795 Jy/beam ! Clean residual mean=-0.000079 rms=0.005391 Jy/beam ! Combined flux in latest and established models = 4.14427 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 4.14427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295611Jy sigma=0.001807 ! Fit after self-cal, rms=0.295576Jy sigma=0.001802 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293778 Jy ! Component: 100 - total flux cleaned = 0.0449685 Jy ! Component: 150 - total flux cleaned = 0.0558167 Jy ! Component: 200 - total flux cleaned = 0.0602728 Jy ! Total flux subtracted in 200 components = 0.0602728 Jy ! Clean residual min=-0.019978 max=0.025611 Jy/beam ! Clean residual mean=-0.000111 rms=0.004301 Jy/beam ! Combined flux in latest and established models = 4.20454 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 4.20454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292836Jy sigma=0.001748 ! Fit after self-cal, rms=0.292644Jy sigma=0.001743 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (-0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984805 Jy ! Component: 100 - total flux cleaned = -0.00413103 Jy ! Component: 150 - total flux cleaned = -0.00680855 Jy ! Component: 200 - total flux cleaned = -0.0091379 Jy ! Total flux subtracted in 200 components = -0.0091379 Jy ! Clean residual min=-0.014843 max=0.019417 Jy/beam ! Clean residual mean=-0.000135 rms=0.003892 Jy/beam ! Combined flux in latest and established models = 4.1954 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 4.1954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287780Jy sigma=0.001677 ! Fit after self-cal, rms=0.287572Jy sigma=0.001672 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200528 Jy ! Component: 100 - total flux cleaned = 0.0235323 Jy ! Component: 150 - total flux cleaned = 0.0254939 Jy ! Component: 200 - total flux cleaned = 0.0268313 Jy ! Total flux subtracted in 200 components = 0.0268313 Jy ! Clean residual min=-0.013076 max=0.014182 Jy/beam ! Clean residual mean=-0.000061 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 4.22223 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 4.22223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285065Jy sigma=0.001633 ! Fit after self-cal, rms=0.285025Jy sigma=0.001632 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285025Jy sigma=0.001632 ! Fit after self-cal, rms=0.284028Jy sigma=0.001607 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=2.321 mas, bmaj=4.237 mas, bpa=-3.393 degrees ! Estimated noise=810.774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017451 Jy ! Component: 100 - total flux cleaned = 0.0288372 Jy ! Component: 150 - total flux cleaned = 0.0376037 Jy ! Component: 200 - total flux cleaned = 0.041383 Jy ! Total flux subtracted in 200 components = 0.041383 Jy ! Clean residual min=-0.012336 max=0.011309 Jy/beam ! Clean residual mean=-0.000086 rms=0.003217 Jy/beam ! Combined flux in latest and established models = 4.26362 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 4.26362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283410Jy sigma=0.001599 ! Fit after self-cal, rms=0.283461Jy sigma=0.001598 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429087 Jy ! Component: 100 - total flux cleaned = 0.00622542 Jy ! Component: 150 - total flux cleaned = 0.00688849 Jy ! Component: 200 - total flux cleaned = 0.00771529 Jy ! Total flux subtracted in 200 components = 0.00771529 Jy ! Clean residual min=-0.011897 max=0.009869 Jy/beam ! Clean residual mean=-0.000070 rms=0.002919 Jy/beam ! Combined flux in latest and established models = 4.27133 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 119 components and 4.27133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283108Jy sigma=0.001596 ! Fit after self-cal, rms=0.283139Jy sigma=0.001596 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8391 mas, bmaj=1.777 mas, bpa=8.716 degrees ! Estimated noise=687.698 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8391 x 1.777 at 8.716 degrees (North through East) ! Clean map min=-0.014677 max=2.6085 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283139Jy sigma=0.001596 ! Fit after self-cal, rms=0.241991Jy sigma=0.001376 ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8384 mas, bmaj=1.777 mas, bpa=8.707 degrees ! Estimated noise=686.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021212 Jy ! Component: 100 - total flux cleaned = 0.000755838 Jy ! Component: 150 - total flux cleaned = 0.00150017 Jy ! Component: 200 - total flux cleaned = 0.00218377 Jy ! Total flux subtracted in 200 components = 0.00218377 Jy ! Clean residual min=-0.009856 max=0.011350 Jy/beam ! Clean residual mean=-0.000082 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 4.27351 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 124 components and 4.27352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240217Jy sigma=0.001345 ! Fit after self-cal, rms=0.240069Jy sigma=0.001343 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (1.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486043 Jy ! Component: 100 - total flux cleaned = 0.00340512 Jy ! Component: 150 - total flux cleaned = 0.00207549 Jy ! Component: 200 - total flux cleaned = 0.0017662 Jy ! Total flux subtracted in 200 components = 0.0017662 Jy ! Clean residual min=-0.008732 max=0.009404 Jy/beam ! Clean residual mean=-0.000082 rms=0.002213 Jy/beam ! Combined flux in latest and established models = 4.27528 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 135 components and 4.27528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238688Jy sigma=0.001324 ! Fit after self-cal, rms=0.238612Jy sigma=0.001323 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (7.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582358 Jy ! Component: 100 - total flux cleaned = 0.00613225 Jy ! Component: 150 - total flux cleaned = 0.00613457 Jy ! Component: 200 - total flux cleaned = 0.00665413 Jy ! Total flux subtracted in 200 components = 0.00665413 Jy ! Clean residual min=-0.007981 max=0.008842 Jy/beam ! Clean residual mean=-0.000058 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 4.28194 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 145 components and 4.28194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237691Jy sigma=0.001309 ! Fit after self-cal, rms=0.237641Jy sigma=0.001309 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (-2.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130871 Jy ! Component: 100 - total flux cleaned = 0.000121841 Jy ! Component: 150 - total flux cleaned = 0.000126496 Jy ! Component: 200 - total flux cleaned = 0.000373077 Jy ! Total flux subtracted in 200 components = 0.000373077 Jy ! Clean residual min=-0.007888 max=0.008697 Jy/beam ! Clean residual mean=-0.000057 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 4.28231 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 158 components and 4.28231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236897Jy sigma=0.001296 ! Fit after self-cal, rms=0.236885Jy sigma=0.001296 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Added new window around map position (16.2, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063983 Jy ! Component: 100 - total flux cleaned = 0.0078937 Jy ! Component: 150 - total flux cleaned = 0.00812661 Jy ! Component: 200 - total flux cleaned = 0.00857138 Jy ! Total flux subtracted in 200 components = 0.00857138 Jy ! Clean residual min=-0.007452 max=0.006503 Jy/beam ! Clean residual mean=-0.000059 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 4.29088 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 180 components and 4.29088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236326Jy sigma=0.001286 ! Fit after self-cal, rms=0.236349Jy sigma=0.001286 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236349Jy sigma=0.001286 ! Fit after self-cal, rms=0.236186Jy sigma=0.001281 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.6074 mas, bmaj=1.281 mas, bpa=8.874 degrees ! Estimated noise=960.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.92759 Jy ! Component: 100 - total flux cleaned = 2.75313 Jy ! Component: 150 - total flux cleaned = 3.25366 Jy ! Component: 200 - total flux cleaned = 3.56581 Jy ! Total flux subtracted in 200 components = 3.56581 Jy ! Clean residual min=-0.039700 max=0.162065 Jy/beam ! Clean residual mean=-0.000173 rms=0.016548 Jy/beam ! Combined flux in latest and established models = 3.56581 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 3.56581 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8377 mas, bmaj=1.776 mas, bpa=8.789 degrees ! Estimated noise=685.709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299163 Jy ! Component: 100 - total flux cleaned = 0.43739 Jy ! Component: 150 - total flux cleaned = 0.505204 Jy ! Component: 200 - total flux cleaned = 0.545482 Jy ! Total flux subtracted in 200 components = 0.545482 Jy ! Clean residual min=-0.016022 max=0.022461 Jy/beam ! Clean residual mean=-0.000262 rms=0.005226 Jy/beam ! Combined flux in latest and established models = 4.1113 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 45 components and 4.1113 Jy ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294287 Jy ! Component: 100 - total flux cleaned = 0.0528723 Jy ! Component: 150 - total flux cleaned = 0.0726085 Jy ! Component: 200 - total flux cleaned = 0.0895313 Jy ! Total flux subtracted in 200 components = 0.0895313 Jy ! Clean residual min=-0.011896 max=0.012299 Jy/beam ! Clean residual mean=-0.000165 rms=0.003249 Jy/beam ! Combined flux in latest and established models = 4.20083 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 86 components and 4.20083 Jy ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=2.317 mas, bmaj=4.234 mas, bpa=-3.328 degrees ! Estimated noise=810.574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232862 Jy ! Component: 100 - total flux cleaned = 0.0409131 Jy ! Component: 150 - total flux cleaned = 0.0550225 Jy ! Component: 200 - total flux cleaned = 0.06656 Jy ! Total flux subtracted in 200 components = 0.06656 Jy ! Clean residual min=-0.011392 max=0.009253 Jy/beam ! Clean residual mean=-0.000157 rms=0.003096 Jy/beam ! Combined flux in latest and established models = 4.26739 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00955957 Jy ! Component: 100 - total flux cleaned = 0.016034 Jy ! Component: 150 - total flux cleaned = 0.0207776 Jy ! Component: 200 - total flux cleaned = 0.0249065 Jy ! Total flux subtracted in 200 components = 0.0249065 Jy ! Clean residual min=-0.009026 max=0.006831 Jy/beam ! Clean residual mean=-0.000085 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 4.29229 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 185 components and 4.29229 Jy ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! Estimated beam: bmin=0.8377 mas, bmaj=1.776 mas, bpa=8.789 degrees ! Estimated noise=685.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113106 Jy ! Component: 100 - total flux cleaned = 6.78623e-05 Jy ! Component: 150 - total flux cleaned = 7.83416e-05 Jy ! Component: 200 - total flux cleaned = 0.000941721 Jy ! Total flux subtracted in 200 components = 0.000941721 Jy ! Clean residual min=-0.008310 max=0.005952 Jy/beam ! Clean residual mean=-0.000042 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 4.29324 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 202 components and 4.29324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267465Jy sigma=0.001677 ! Fit after self-cal, rms=0.248590Jy sigma=0.001422 wmodel J0609-1542_X_2010_10_13_pus_map.mod ! Writing 202 model components to file: J0609-1542_X_2010_10_13_pus_map.mod wobs J0609-1542_X_2010_10_13_pus_uvs.fits ! Writing UV FITS file: J0609-1542_X_2010_10_13_pus_uvs.fits wwins J0609-1542_X_2010_10_13_pus_map.win ! wwins: Wrote 9 windows to J0609-1542_X_2010_10_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147383 Jy ! Component: 100 - total flux cleaned = 0.00131751 Jy ! Component: 150 - total flux cleaned = 0.00131918 Jy ! Component: 200 - total flux cleaned = 0.000905813 Jy ! Component: 250 - total flux cleaned = 0.00036962 Jy ! Component: 300 - total flux cleaned = 0.000106663 Jy ! Component: 350 - total flux cleaned = 0.000234338 Jy ! Component: 400 - total flux cleaned = 0.000109405 Jy ! Component: 450 - total flux cleaned = 0.000111333 Jy ! Component: 500 - total flux cleaned = 0.000113144 Jy ! Component: 550 - total flux cleaned = -4.36584e-06 Jy ! Component: 600 - total flux cleaned = -4.86294e-06 Jy ! Component: 650 - total flux cleaned = -0.000234391 Jy ! Component: 700 - total flux cleaned = -0.00057015 Jy ! Component: 750 - total flux cleaned = -0.000790979 Jy ! Component: 800 - total flux cleaned = -0.00111533 Jy ! Component: 850 - total flux cleaned = -0.00143577 Jy ! Component: 900 - total flux cleaned = -0.00217148 Jy ! Component: 950 - total flux cleaned = -0.00227531 Jy ! Component: 1000 - total flux cleaned = -0.00289214 Jy ! Component: 1050 - total flux cleaned = -0.00339771 Jy ! Component: 1100 - total flux cleaned = -0.00369637 Jy ! Component: 1150 - total flux cleaned = -0.0041897 Jy ! Component: 1200 - total flux cleaned = -0.00448268 Jy ! Component: 1250 - total flux cleaned = -0.0050609 Jy ! Component: 1300 - total flux cleaned = -0.00534507 Jy ! Component: 1350 - total flux cleaned = -0.00591086 Jy ! Component: 1400 - total flux cleaned = -0.00637517 Jy ! Component: 1450 - total flux cleaned = -0.00664885 Jy ! Component: 1500 - total flux cleaned = -0.00710338 Jy ! Component: 1550 - total flux cleaned = -0.00755461 Jy ! Component: 1600 - total flux cleaned = -0.00791096 Jy ! Component: 1650 - total flux cleaned = -0.00844232 Jy ! Component: 1700 - total flux cleaned = -0.00888013 Jy ! Component: 1750 - total flux cleaned = -0.00922699 Jy ! Component: 1800 - total flux cleaned = -0.00939828 Jy ! Component: 1850 - total flux cleaned = -0.00965411 Jy ! Component: 1900 - total flux cleaned = -0.00999329 Jy ! Component: 1950 - total flux cleaned = -0.0100771 Jy ! Component: 2000 - total flux cleaned = -0.0104929 Jy ! Total flux subtracted in 2048 components = -0.0106575 Jy ! Clean residual min=-0.004471 max=0.004834 Jy/beam ! Clean residual mean=-0.000008 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 4.28258 Jy keep ! Adding 93 model components to the UV plane model. ! The established model now contains 284 components and 4.28258 Jy ![Exited script file: muppet] wmap "J0609-1542_X_2010_10_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8377 x 1.776 at 8.789 degrees (North through East) ! Clean map min=-0.0064293 max=2.6622 Jy/beam ! Writing clean map to FITS file: J0609-1542_X_2010_10_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.66218 invert ! Inverting map ! Your choice of large map pixels excluded 8.49% of the data. ! The x-axis pixel size should ideally be below 0.1635 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133245 device "J0609-1542_X_2010_10_13_pus\_map.eps/VPS" ! Attempting to open device: 'J0609-1542_X_2010_10_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.150153 0.150153 0.300306 0.600612 1.20122 2.40245 4.80489 9.60979 19.2196 38.4392 76.8783 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.662 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8377 x 1.776 at 8.789 degrees (North through East) ! Clean map min=-0.0064293 max=2.6622 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0609-1542_X_2010_10_13_pus\_map.gif/vgif" ! Attempting to open device: 'J0609-1542_X_2010_10_13_pus_map.gif/vgif' mapplot cln