! Started logfile: J2319-3656_S_2010_06_23_pus_uvs.log on Sun Jan 30 13:57:32 2011 obs J2319-3656_S_2010_06_23_pus_uva.fits ! Reading UV FITS file: J2319-3656_S_2010_06_23_pus_uva.fits ! AN table 1: 96 integrations on 105 of 105 possible baselines. ! Apparent sampling: 0.263294 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2319-3656 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23696e+09 8e+06 1 8e+06 ! 02 2 2.26696e+09 8e+06 1 8e+06 ! 03 3 2.35696e+09 8e+06 1 8e+06 ! 04 4 2.37696e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3685 lines of history. ! ! Reading 10616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2319-3656_S_2010_06_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 677 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 677 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 677 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 677 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013824Jy sigma=0.009591 ! Fit after self-cal, rms=0.934590Jy sigma=0.008871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=7.99 mas, bpa=0.3555 degrees ! Estimated noise=1624.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0581051 Jy ! Component: 100 - total flux cleaned = 0.0710871 Jy ! Total flux subtracted in 100 components = 0.0710871 Jy ! Clean residual min=-0.004790 max=0.005964 Jy/beam ! Clean residual mean=0.000056 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.0710871 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0710871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137137Jy sigma=0.001162 ! Fit after self-cal, rms=0.135608Jy sigma=0.001146 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=9.356 mas, bpa=0.6144 degrees ! Estimated noise=739.689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407651 Jy ! Component: 100 - total flux cleaned = 0.00393587 Jy ! Component: 150 - total flux cleaned = 0.00386966 Jy ! Component: 200 - total flux cleaned = 0.00380819 Jy ! Total flux subtracted in 200 components = 0.00380819 Jy ! Clean residual min=-0.004427 max=0.004157 Jy/beam ! Clean residual mean=0.000079 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0748953 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.0748953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135367Jy sigma=0.001145 ! Fit after self-cal, rms=0.135285Jy sigma=0.001145 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 0.90 KK 1.00* ! KP 1.08 LA 1.02 MA 1.00* MK 1.03 ! NL 0.86 NY 1.00* OV 1.10 PT 1.00 ! SC 0.93 TS 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.70 KK 1.00* ! KP 1.03 LA 0.99 MA 1.00* MK 1.03 ! NL 0.80 NY 1.00* OV 1.00 PT 0.94 ! SC 1.06 TS 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.79 KK 1.00* ! KP 1.00 LA 1.01 MA 1.00* MK 1.17 ! NL 0.94 NY 1.00* OV 1.03 PT 0.95 ! SC 0.94 TS 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.76 KK 1.00* ! KP 1.14 LA 0.96 MA 1.00* MK 1.04 ! NL 0.85 NY 1.00* OV 0.99 PT 1.01 ! SC 0.94 TS 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.135285Jy sigma=0.001145 ! Fit after self-cal, rms=0.126581Jy sigma=0.001141 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=9.353 mas, bpa=1.085 degrees ! Estimated noise=733.243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362677 Jy ! Component: 100 - total flux cleaned = 0.000341422 Jy ! Component: 150 - total flux cleaned = 0.000307033 Jy ! Component: 200 - total flux cleaned = 0.000277014 Jy ! Total flux subtracted in 200 components = 0.000277014 Jy ! Clean residual min=-0.002851 max=0.003082 Jy/beam ! Clean residual mean=0.000050 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0751723 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0751723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126575Jy sigma=0.001141 ! Fit after self-cal, rms=0.126332Jy sigma=0.001140 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126332Jy sigma=0.001140 ! Fit after self-cal, rms=0.125485Jy sigma=0.001139 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=9.375 mas, bpa=1.041 degrees ! Estimated noise=731.448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213141 Jy ! Component: 100 - total flux cleaned = 0.00026022 Jy ! Component: 150 - total flux cleaned = 0.000287737 Jy ! Component: 200 - total flux cleaned = 0.000299619 Jy ! Total flux subtracted in 200 components = 0.000299619 Jy ! Clean residual min=-0.002546 max=0.002928 Jy/beam ! Clean residual mean=0.000046 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0754719 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0754719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125481Jy sigma=0.001139 ! Fit after self-cal, rms=0.125498Jy sigma=0.001138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033044 Jy ! Component: 100 - total flux cleaned = -0.000318036 Jy ! Component: 150 - total flux cleaned = -0.000295676 Jy ! Component: 200 - total flux cleaned = -0.000295247 Jy ! Total flux subtracted in 200 components = -0.000295247 Jy ! Clean residual min=-0.002446 max=0.002846 Jy/beam ! Clean residual mean=0.000051 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.0751767 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.0751767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125495Jy sigma=0.001138 ! Fit after self-cal, rms=0.125487Jy sigma=0.001138 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125487Jy sigma=0.001138 ! Fit after self-cal, rms=0.126685Jy sigma=0.001138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=9.343 mas, bpa=0.9966 degrees ! Estimated noise=736.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633809 Jy ! Component: 100 - total flux cleaned = 0.000690261 Jy ! Component: 150 - total flux cleaned = 0.000702624 Jy ! Component: 200 - total flux cleaned = 0.000714373 Jy ! Total flux subtracted in 200 components = 0.000714373 Jy ! Clean residual min=-0.002551 max=0.002926 Jy/beam ! Clean residual mean=0.000046 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.075891 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.075891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126681Jy sigma=0.001138 ! Fit after self-cal, rms=0.126713Jy sigma=0.001138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.06326e-05 Jy ! Component: 100 - total flux cleaned = -3.91974e-05 Jy ! Component: 150 - total flux cleaned = -1.82528e-05 Jy ! Component: 200 - total flux cleaned = -2.83327e-05 Jy ! Total flux subtracted in 200 components = -2.83327e-05 Jy ! Clean residual min=-0.002532 max=0.002909 Jy/beam ! Clean residual mean=0.000049 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0758627 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.0758627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126711Jy sigma=0.001138 ! Fit after self-cal, rms=0.126711Jy sigma=0.001138 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126711Jy sigma=0.001138 ! Fit after self-cal, rms=0.127696Jy sigma=0.001138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.296 mas, bmaj=25.39 mas, bpa=-1.12 degrees ! Estimated noise=925.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835661 Jy ! Component: 100 - total flux cleaned = 0.000849057 Jy ! Component: 150 - total flux cleaned = 0.000861297 Jy ! Component: 200 - total flux cleaned = 0.000871341 Jy ! Total flux subtracted in 200 components = 0.000871341 Jy ! Clean residual min=-0.002765 max=0.003713 Jy/beam ! Clean residual mean=0.000091 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.076734 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.076734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127695Jy sigma=0.001138 ! Fit after self-cal, rms=0.127705Jy sigma=0.001138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.63575e-05 Jy ! Component: 100 - total flux cleaned = -2.75646e-05 Jy ! Component: 150 - total flux cleaned = -2.78488e-05 Jy ! Component: 200 - total flux cleaned = -1.9568e-05 Jy ! Total flux subtracted in 200 components = -1.9568e-05 Jy ! Clean residual min=-0.002786 max=0.003712 Jy/beam ! Clean residual mean=0.000094 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.0767145 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.0767145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127706Jy sigma=0.001138 ! Fit after self-cal, rms=0.127702Jy sigma=0.001138 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=9.323 mas, bpa=0.958 degrees ! Estimated noise=740.999 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 9.323 at 0.958 degrees (North through East) ! Clean map min=-0.0024652 max=0.07752 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.684 mas, bmaj=8.007 mas, bpa=0.5915 degrees ! Estimated noise=1586.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584522 Jy ! Component: 100 - total flux cleaned = 0.0716443 Jy ! Component: 150 - total flux cleaned = 0.0726393 Jy ! Component: 200 - total flux cleaned = 0.0729288 Jy ! Total flux subtracted in 200 components = 0.0729288 Jy ! Clean residual min=-0.004786 max=0.005057 Jy/beam ! Clean residual mean=0.000103 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.0729288 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0729288 Jy ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=9.323 mas, bpa=0.958 degrees ! Estimated noise=740.999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298065 Jy ! Component: 100 - total flux cleaned = 0.00384782 Jy ! Component: 150 - total flux cleaned = 0.00382489 Jy ! Component: 200 - total flux cleaned = 0.0038054 Jy ! Total flux subtracted in 200 components = 0.0038054 Jy ! Clean residual min=-0.002626 max=0.003000 Jy/beam ! Clean residual mean=0.000049 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0767342 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.0767342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.296 mas, bmaj=25.39 mas, bpa=-1.12 degrees ! Estimated noise=925.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80342e-05 Jy ! Component: 100 - total flux cleaned = 5.76223e-05 Jy ! Component: 150 - total flux cleaned = 7.23247e-05 Jy ! Component: 200 - total flux cleaned = 8.50121e-05 Jy ! Total flux subtracted in 200 components = 8.50121e-05 Jy ! Clean residual min=-0.002836 max=0.003774 Jy/beam ! Clean residual mean=0.000094 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.0768192 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04938e-05 Jy ! Component: 100 - total flux cleaned = 1.0199e-05 Jy ! Component: 150 - total flux cleaned = 1.0684e-05 Jy ! Component: 200 - total flux cleaned = 1.08768e-05 Jy ! Total flux subtracted in 200 components = 1.08768e-05 Jy ! Clean residual min=-0.002821 max=0.003756 Jy/beam ! Clean residual mean=0.000094 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.0768301 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0768301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=9.323 mas, bpa=0.958 degrees ! Estimated noise=740.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015062 Jy ! Component: 100 - total flux cleaned = -0.000129605 Jy ! Component: 150 - total flux cleaned = -0.000129972 Jy ! Component: 200 - total flux cleaned = -0.000146518 Jy ! Total flux subtracted in 200 components = -0.000146518 Jy ! Clean residual min=-0.002556 max=0.002932 Jy/beam ! Clean residual mean=0.000049 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.0766836 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.0766836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127709Jy sigma=0.001138 ! Fit after self-cal, rms=0.127711Jy sigma=0.001138 wmodel J2319-3656_S_2010_06_23_pus_map.mod ! Writing 45 model components to file: J2319-3656_S_2010_06_23_pus_map.mod wobs J2319-3656_S_2010_06_23_pus_uvs.fits ! Writing UV FITS file: J2319-3656_S_2010_06_23_pus_uvs.fits wwins J2319-3656_S_2010_06_23_pus_map.win ! wwins: Wrote 1 windows to J2319-3656_S_2010_06_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112111 Jy ! Component: 100 - total flux cleaned = 0.00140292 Jy ! Component: 150 - total flux cleaned = 0.0014882 Jy ! Component: 200 - total flux cleaned = 0.00156841 Jy ! Component: 250 - total flux cleaned = 0.00164506 Jy ! Component: 300 - total flux cleaned = 0.0016459 Jy ! Component: 350 - total flux cleaned = 0.00157702 Jy ! Component: 400 - total flux cleaned = 0.00134277 Jy ! Component: 450 - total flux cleaned = 0.00118057 Jy ! Component: 500 - total flux cleaned = 0.00108572 Jy ! Component: 550 - total flux cleaned = 0.000962382 Jy ! Component: 600 - total flux cleaned = 0.000813183 Jy ! Component: 650 - total flux cleaned = 0.00069728 Jy ! Component: 700 - total flux cleaned = 0.000556383 Jy ! Component: 750 - total flux cleaned = 0.000474479 Jy ! Component: 800 - total flux cleaned = 0.000448478 Jy ! Component: 850 - total flux cleaned = 0.000422829 Jy ! Component: 900 - total flux cleaned = 0.000448955 Jy ! Component: 950 - total flux cleaned = 0.000499402 Jy ! Component: 1000 - total flux cleaned = 0.000499193 Jy ! Component: 1050 - total flux cleaned = 0.000498802 Jy ! Component: 1100 - total flux cleaned = 0.000546026 Jy ! Component: 1150 - total flux cleaned = 0.000545929 Jy ! Component: 1200 - total flux cleaned = 0.000591631 Jy ! Component: 1250 - total flux cleaned = 0.000636656 Jy ! Component: 1300 - total flux cleaned = 0.000680678 Jy ! Component: 1350 - total flux cleaned = 0.000746122 Jy ! Component: 1400 - total flux cleaned = 0.000810241 Jy ! Component: 1450 - total flux cleaned = 0.000810059 Jy ! Component: 1500 - total flux cleaned = 0.000831025 Jy ! Component: 1550 - total flux cleaned = 0.000810629 Jy ! Component: 1600 - total flux cleaned = 0.000851341 Jy ! Component: 1650 - total flux cleaned = 0.000871194 Jy ! Component: 1700 - total flux cleaned = 0.000910503 Jy ! Component: 1750 - total flux cleaned = 0.00087135 Jy ! Component: 1800 - total flux cleaned = 0.00089068 Jy ! Component: 1850 - total flux cleaned = 0.000871847 Jy ! Component: 1900 - total flux cleaned = 0.000966106 Jy ! Component: 1950 - total flux cleaned = 0.00100315 Jy ! Component: 2000 - total flux cleaned = 0.00105802 Jy ! Total flux subtracted in 2048 components = 0.00107593 Jy ! Clean residual min=-0.001320 max=0.001045 Jy/beam ! Clean residual mean=0.000024 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0777595 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 162 components and 0.0777595 Jy ![Exited script file: muppet] wmap "J2319-3656_S_2010_06_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 9.323 at 0.958 degrees (North through East) ! Clean map min=-0.0019222 max=0.077123 Jy/beam ! Writing clean map to FITS file: J2319-3656_S_2010_06_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0771233 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000379813 device "J2319-3656_S_2010_06_23_pus\_map.eps/VPS" ! Attempting to open device: 'J2319-3656_S_2010_06_23_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47742 1.47742 2.95485 5.9097 11.8194 23.6388 47.2776 94.5552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 9.323 at 0.958 degrees (North through East) ! Clean map min=-0.0019222 max=0.077123 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2319-3656_S_2010_06_23_pus\_map.gif/vgif" ! Attempting to open device: 'J2319-3656_S_2010_06_23_pus_map.gif/vgif' mapplot cln