! Started logfile: J1058+8114_X_2010_06_23_pus_uvs.log on Thu Jan 27 22:01:32 2011
obs J1058+8114_X_2010_06_23_pus_uva.fits
! Reading UV FITS file: J1058+8114_X_2010_06_23_pus_uva.fits
! AN table 1: 157 integrations on 105 of 105 possible baselines.
! AN table 2: 248 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.287972 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1058+8114
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40996e+09        8e+06          1        8e+06
!  02        2  8.47996e+09        8e+06          1        8e+06
!  03        3  8.79496e+09        8e+06          1        8e+06
!  04        4  8.89996e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3589 lines of history.
! 
! Reading 48984 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1058+8114_X_2010_06_23_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1678 telescope corrections were flagged in sub-array 1.
!  A total of 1851 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1698 telescope corrections were flagged in sub-array 1.
!  A total of 1980 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1678 telescope corrections were flagged in sub-array 1.
!  A total of 1851 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1678 telescope corrections were flagged in sub-array 1.
!  A total of 1851 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.596269Jy  sigma=0.006108
! Fit after  self-cal, rms=0.303592Jy  sigma=0.003108
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.5134 mas, bmaj=0.5349 mas, bpa=45.49 degrees
! Estimated noise=585.631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.586463 Jy
! Component: 100  -  total flux cleaned = 0.72971 Jy
! Total flux subtracted in 100 components = 0.72971 Jy
! Clean residual min=-0.018166 max=0.059276 Jy/beam
! Clean residual mean=-0.000031 rms=0.003207 Jy/beam
! Combined flux in latest and established models = 0.72971 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.72971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225177Jy  sigma=0.002323
! Fit after  self-cal, rms=0.225149Jy  sigma=0.002323
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0662979 Jy
! Component: 100  -  total flux cleaned = 0.107997 Jy
! Total flux subtracted in 100 components = 0.107997 Jy
! Clean residual min=-0.011204 max=0.023316 Jy/beam
! Clean residual mean=-0.000019 rms=0.002119 Jy/beam
! Combined flux in latest and established models = 0.837707 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.837707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191283Jy  sigma=0.001816
! Fit after  self-cal, rms=0.190976Jy  sigma=0.001813
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Added new window around map position (-0.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0305062 Jy
! Component: 100  -  total flux cleaned = 0.052941 Jy
! Total flux subtracted in 100 components = 0.052941 Jy
! Clean residual min=-0.008842 max=0.014897 Jy/beam
! Clean residual mean=-0.000013 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.890648 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 17 components and 0.890648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181062Jy  sigma=0.001651
! Fit after  self-cal, rms=0.180883Jy  sigma=0.001649
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018432 Jy
! Component: 100  -  total flux cleaned = 0.0322542 Jy
! Total flux subtracted in 100 components = 0.0322542 Jy
! Clean residual min=-0.007335 max=0.011885 Jy/beam
! Clean residual mean=-0.000010 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.922902 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.922902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176780Jy  sigma=0.001578
! Fit after  self-cal, rms=0.176723Jy  sigma=0.001577
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Added new window around map position (0.8, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123969 Jy
! Component: 100  -  total flux cleaned = 0.0221158 Jy
! Total flux subtracted in 100 components = 0.0221158 Jy
! Clean residual min=-0.006732 max=0.007358 Jy/beam
! Clean residual mean=-0.000007 rms=0.001504 Jy/beam
! Combined flux in latest and established models = 0.945018 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.945018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174712Jy  sigma=0.001541
! Fit after  self-cal, rms=0.174711Jy  sigma=0.001541
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6322 mas, bmaj=0.6405 mas, bpa=29.68 degrees
! Estimated noise=314.573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214651 Jy
! Component: 100  -  total flux cleaned = 0.0349583 Jy
! Component: 150  -  total flux cleaned = 0.0441628 Jy
! Component: 200  -  total flux cleaned = 0.0506051 Jy
! Total flux subtracted in 200 components = 0.0506051 Jy
! Clean residual min=-0.006786 max=0.009420 Jy/beam
! Clean residual mean=-0.000008 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.995623 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 32 components and 0.995623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172533Jy  sigma=0.001495
! Fit after  self-cal, rms=0.172521Jy  sigma=0.001495
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Added new window around map position (-1.8, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00881049 Jy
! Component: 100  -  total flux cleaned = 0.0101919 Jy
! Component: 150  -  total flux cleaned = 0.0122601 Jy
! Component: 200  -  total flux cleaned = 0.013331 Jy
! Total flux subtracted in 200 components = 0.013331 Jy
! Clean residual min=-0.006954 max=0.006791 Jy/beam
! Clean residual mean=-0.000001 rms=0.001373 Jy/beam
! Combined flux in latest and established models = 1.00895 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 45 components and 1.00895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172084Jy  sigma=0.001487
! Fit after  self-cal, rms=0.172043Jy  sigma=0.001486
! Inverting map 
! Your choice of large map pixels excluded 5.37% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.08     KK        1.04     
!   KP        0.98     LA        0.96     MA        1.04     MK        0.99     
!   NL        0.99     NY        1.06     OV        0.99     PT        0.97     
!   SC        1.05     TS        1.01     ZC        0.99     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.98     HN        0.95     KK        1.06     
!   KP        0.99     LA        0.97     MA        1.04     MK        0.99     
!   NL        1.01     NY        1.03     OV        0.99     PT        0.99     
!   SC        1.04     TS        0.97     ZC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.10     KK        1.08     
!   KP        0.97     LA        0.99     MA        1.00*    MK        0.99     
!   NL        1.01     NY        1.08     OV        1.02     PT        0.96     
!   SC        1.06     TS        1.01     ZC        1.00     
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     HN        0.97     KK        1.09     
!   KP        0.98     LA        1.00     MA        1.00*    MK        1.00     
!   NL        1.04     NY        1.03     OV        1.02     PT        0.98     
!   SC        1.08     TS        0.98     ZC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.09     KK        1.05     
!   KP        0.97     LA        0.98     MA        1.02     MK        0.99     
!   NL        0.96     NY        1.11     OV        0.99     PT        0.96     
!   SC        1.02     TS        1.01     ZC        0.98     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.98     HN        0.96     KK        1.05     
!   KP        0.99     LA        0.99     MA        1.04     MK        0.99     
!   NL        0.99     NY        1.05     OV        1.01     PT        0.98     
!   SC        1.02     TS        0.97     ZC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.11     KK        1.05     
!   KP        0.97     LA        0.96     MA        1.06     MK        0.98     
!   NL        1.00     NY        1.08     OV        0.98     PT        0.97     
!   SC        1.05     TS        1.02     ZC        1.03     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.98     HN        0.97     KK        1.04     
!   KP        0.98     LA        0.98     MA        1.06     MK        0.98     
!   NL        1.01     NY        1.04     OV        0.99     PT        0.99     
!   SC        1.05     TS        0.97     ZC        1.05     
! 
! 
! Fit before self-cal, rms=0.172043Jy  sigma=0.001486
! Fit after  self-cal, rms=0.173453Jy  sigma=0.001438
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6364 mas, bmaj=0.6423 mas, bpa=27.24 degrees
! Estimated noise=315.835 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00738617 Jy
! Component: 100  -  total flux cleaned = -0.0102871 Jy
! Component: 150  -  total flux cleaned = -0.0118041 Jy
! Component: 200  -  total flux cleaned = -0.0129532 Jy
! Total flux subtracted in 200 components = -0.0129532 Jy
! Clean residual min=-0.004663 max=0.004477 Jy/beam
! Clean residual mean=0.000010 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.996001 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.996001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173036Jy  sigma=0.001433
! Fit after  self-cal, rms=0.173107Jy  sigma=0.001433
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173107Jy  sigma=0.001433
! Fit after  self-cal, rms=0.171340Jy  sigma=0.001408
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6375 mas, bmaj=0.6425 mas, bpa=29.05 degrees
! Estimated noise=315.788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00595298 Jy
! Component: 100  -  total flux cleaned = -0.00803911 Jy
! Component: 150  -  total flux cleaned = -0.00836495 Jy
! Component: 200  -  total flux cleaned = -0.00864286 Jy
! Total flux subtracted in 200 components = -0.00864286 Jy
! Clean residual min=-0.002921 max=0.002468 Jy/beam
! Clean residual mean=0.000005 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.987358 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 63 components and 0.987358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171053Jy  sigma=0.001405
! Fit after  self-cal, rms=0.171067Jy  sigma=0.001405
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016738 Jy
! Component: 100  -  total flux cleaned = -0.000466365 Jy
! Component: 150  -  total flux cleaned = -0.000730329 Jy
! Component: 200  -  total flux cleaned = -0.000908127 Jy
! Total flux subtracted in 200 components = -0.000908127 Jy
! Clean residual min=-0.002766 max=0.002454 Jy/beam
! Clean residual mean=0.000005 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.98645 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 0.98645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171008Jy  sigma=0.001404
! Fit after  self-cal, rms=0.171008Jy  sigma=0.001404
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171008Jy  sigma=0.001404
! Fit after  self-cal, rms=0.171339Jy  sigma=0.001398
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6383 mas, bmaj=0.6431 mas, bpa=32.63 degrees
! Estimated noise=315.839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0037476 Jy
! Component: 100  -  total flux cleaned = -0.00493143 Jy
! Component: 150  -  total flux cleaned = -0.00534673 Jy
! Component: 200  -  total flux cleaned = -0.00570174 Jy
! Total flux subtracted in 200 components = -0.00570174 Jy
! Clean residual min=-0.002607 max=0.002022 Jy/beam
! Clean residual mean=0.000003 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.980748 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.980749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171213Jy  sigma=0.001396
! Fit after  self-cal, rms=0.171226Jy  sigma=0.001396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100944 Jy
! Component: 100  -  total flux cleaned = -0.000197448 Jy
! Component: 150  -  total flux cleaned = -0.000240945 Jy
! Component: 200  -  total flux cleaned = -0.000321017 Jy
! Total flux subtracted in 200 components = -0.000321017 Jy
! Clean residual min=-0.002574 max=0.002033 Jy/beam
! Clean residual mean=0.000003 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.980428 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.980428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171198Jy  sigma=0.001396
! Fit after  self-cal, rms=0.171198Jy  sigma=0.001396
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171198Jy  sigma=0.001396
! Fit after  self-cal, rms=0.171635Jy  sigma=0.001396
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=2.441 mas, bmaj=2.574 mas, bpa=87.29 degrees
! Estimated noise=503.47 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00412073 Jy
! Component: 100  -  total flux cleaned = -0.0055261 Jy
! Component: 150  -  total flux cleaned = -0.00584605 Jy
! Component: 200  -  total flux cleaned = -0.00592164 Jy
! Total flux subtracted in 200 components = -0.00592164 Jy
! Clean residual min=-0.002480 max=0.002613 Jy/beam
! Clean residual mean=0.000008 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.974506 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.974506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171608Jy  sigma=0.001395
! Fit after  self-cal, rms=0.171610Jy  sigma=0.001395
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.26252e-05 Jy
! Component: 100  -  total flux cleaned = -4.46598e-05 Jy
! Component: 150  -  total flux cleaned = -4.47823e-05 Jy
! Component: 200  -  total flux cleaned = -4.48312e-05 Jy
! Total flux subtracted in 200 components = -4.48312e-05 Jy
! Clean residual min=-0.002494 max=0.002645 Jy/beam
! Clean residual mean=0.000008 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.974461 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 86 components and 0.974461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171609Jy  sigma=0.001395
! Fit after  self-cal, rms=0.171609Jy  sigma=0.001395
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6391 mas, bmaj=0.6434 mas, bpa=33.9 degrees
! Estimated noise=315.955 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6391 x 0.6434 at 33.9 degrees (North through East)
! Clean map  min=-0.0016982  max=0.79434 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171609Jy  sigma=0.001395
! Fit after  self-cal, rms=0.165108Jy  sigma=0.001313
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6397 mas, bmaj=0.6439 mas, bpa=31.73 degrees
! Estimated noise=315.486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00224232 Jy
! Component: 100  -  total flux cleaned = -0.00277964 Jy
! Component: 150  -  total flux cleaned = -0.00287905 Jy
! Component: 200  -  total flux cleaned = -0.00296899 Jy
! Total flux subtracted in 200 components = -0.00296899 Jy
! Clean residual min=-0.002130 max=0.001918 Jy/beam
! Clean residual mean=0.000002 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.971492 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 88 components and 0.971492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165056Jy  sigma=0.001313
! Fit after  self-cal, rms=0.165055Jy  sigma=0.001313
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.42732e-05 Jy
! Component: 100  -  total flux cleaned = -0.000175313 Jy
! Component: 150  -  total flux cleaned = -0.000212422 Jy
! Component: 200  -  total flux cleaned = -0.000247668 Jy
! Total flux subtracted in 200 components = -0.000247668 Jy
! Clean residual min=-0.002159 max=0.001924 Jy/beam
! Clean residual mean=0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.971244 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.971244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165036Jy  sigma=0.001313
! Fit after  self-cal, rms=0.165036Jy  sigma=0.001313
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165036Jy  sigma=0.001313
! Fit after  self-cal, rms=0.165284Jy  sigma=0.001312
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.513 mas, bmaj=0.5368 mas, bpa=47.2 degrees
! Estimated noise=596.042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.594539 Jy
! Component: 100  -  total flux cleaned = 0.740334 Jy
! Component: 150  -  total flux cleaned = 0.807366 Jy
! Component: 200  -  total flux cleaned = 0.849716 Jy
! Total flux subtracted in 200 components = 0.849716 Jy
! Clean residual min=-0.007435 max=0.022730 Jy/beam
! Clean residual mean=-0.000014 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.849716 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.849716 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6401 mas, bmaj=0.6441 mas, bpa=32.92 degrees
! Estimated noise=315.534 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465443 Jy
! Component: 100  -  total flux cleaned = 0.0717662 Jy
! Component: 150  -  total flux cleaned = 0.0868519 Jy
! Component: 200  -  total flux cleaned = 0.0963574 Jy
! Total flux subtracted in 200 components = 0.0963574 Jy
! Clean residual min=-0.002122 max=0.005311 Jy/beam
! Clean residual mean=-0.000011 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.946074 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 24 components and 0.946073 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Added new window around map position (0, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652476 Jy
! Component: 100  -  total flux cleaned = 0.011198 Jy
! Component: 150  -  total flux cleaned = 0.0146085 Jy
! Component: 200  -  total flux cleaned = 0.0162044 Jy
! Total flux subtracted in 200 components = 0.0162044 Jy
! Clean residual min=-0.001930 max=0.002046 Jy/beam
! Clean residual mean=-0.000002 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.962278 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 40 components and 0.962278 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Added new window around map position (-23.6, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134847 Jy
! Component: 100  -  total flux cleaned = 0.00238521 Jy
! Component: 150  -  total flux cleaned = 0.00315336 Jy
! Component: 200  -  total flux cleaned = 0.00383786 Jy
! Total flux subtracted in 200 components = 0.00383786 Jy
! Clean residual min=-0.001963 max=0.001993 Jy/beam
! Clean residual mean=-0.000000 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.966116 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 47 components and 0.966116 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Added new window around map position (12.2, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139611 Jy
! Component: 100  -  total flux cleaned = 0.00182933 Jy
! Component: 150  -  total flux cleaned = 0.00223325 Jy
! Component: 200  -  total flux cleaned = 0.00256234 Jy
! Total flux subtracted in 200 components = 0.00256234 Jy
! Clean residual min=-0.001921 max=0.001778 Jy/beam
! Clean residual mean=0.000000 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.968678 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 57 components and 0.968678 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=2.442 mas, bmaj=2.577 mas, bpa=87.05 degrees
! Estimated noise=500.507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168608 Jy
! Component: 100  -  total flux cleaned = 0.00260713 Jy
! Component: 150  -  total flux cleaned = 0.00278911 Jy
! Component: 200  -  total flux cleaned = 0.00287095 Jy
! Total flux subtracted in 200 components = 0.00287095 Jy
! Clean residual min=-0.002114 max=0.001972 Jy/beam
! Clean residual mean=0.000009 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.971549 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.70889e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147023 Jy
! Component: 150  -  total flux cleaned = 0.000187702 Jy
! Component: 200  -  total flux cleaned = 0.00018788 Jy
! Total flux subtracted in 200 components = 0.00018788 Jy
! Clean residual min=-0.002108 max=0.002006 Jy/beam
! Clean residual mean=0.000009 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.971737 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 0.971737 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! Estimated beam: bmin=0.6401 mas, bmaj=0.6441 mas, bpa=32.92 degrees
! Estimated noise=315.534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000797101 Jy
! Component: 100  -  total flux cleaned = -0.000879353 Jy
! Component: 150  -  total flux cleaned = -0.000955969 Jy
! Component: 200  -  total flux cleaned = -0.000956287 Jy
! Total flux subtracted in 200 components = -0.000956287 Jy
! Clean residual min=-0.001840 max=0.001771 Jy/beam
! Clean residual mean=0.000001 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.970781 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.970781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165284Jy  sigma=0.001313
! Fit after  self-cal, rms=0.165266Jy  sigma=0.001312
wmodel J1058+8114_X_2010_06_23_pus_map.mod
! Writing 81 model components to file: J1058+8114_X_2010_06_23_pus_map.mod
wobs J1058+8114_X_2010_06_23_pus_uvs.fits
! Writing UV FITS file: J1058+8114_X_2010_06_23_pus_uvs.fits
wwins J1058+8114_X_2010_06_23_pus_map.win
! wwins: Wrote 7 windows to J1058+8114_X_2010_06_23_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278421 Jy
! Component: 100  -  total flux cleaned = -0.000215317 Jy
! Component: 150  -  total flux cleaned = -9.4553e-05 Jy
! Component: 200  -  total flux cleaned = 8.3488e-05 Jy
! Component: 250  -  total flux cleaned = 0.000200093 Jy
! Component: 300  -  total flux cleaned = 0.000257738 Jy
! Component: 350  -  total flux cleaned = 0.000258357 Jy
! Component: 400  -  total flux cleaned = 0.000397993 Jy
! Component: 450  -  total flux cleaned = 0.000397963 Jy
! Component: 500  -  total flux cleaned = 0.000479314 Jy
! Component: 550  -  total flux cleaned = 0.000398164 Jy
! Component: 600  -  total flux cleaned = 0.000318415 Jy
! Component: 650  -  total flux cleaned = 0.000318772 Jy
! Component: 700  -  total flux cleaned = 0.000344975 Jy
! Component: 750  -  total flux cleaned = 0.000293427 Jy
! Component: 800  -  total flux cleaned = 0.000267905 Jy
! Component: 850  -  total flux cleaned = 0.000268038 Jy
! Component: 900  -  total flux cleaned = 0.000217553 Jy
! Component: 950  -  total flux cleaned = 0.000292879 Jy
! Component: 1000  -  total flux cleaned = 0.000267885 Jy
! Component: 1050  -  total flux cleaned = 0.000168931 Jy
! Component: 1100  -  total flux cleaned = 0.000218105 Jy
! Component: 1150  -  total flux cleaned = 9.62981e-05 Jy
! Component: 1200  -  total flux cleaned = 4.8104e-05 Jy
! Component: 1250  -  total flux cleaned = 7.23989e-05 Jy
! Component: 1300  -  total flux cleaned = 4.84401e-05 Jy
! Component: 1350  -  total flux cleaned = -7.056e-05 Jy
! Component: 1400  -  total flux cleaned = -2.32145e-05 Jy
! Component: 1450  -  total flux cleaned = -2.32622e-05 Jy
! Component: 1500  -  total flux cleaned = -0.000140107 Jy
! Component: 1550  -  total flux cleaned = -0.000163534 Jy
! Component: 1600  -  total flux cleaned = -0.000140227 Jy
! Component: 1650  -  total flux cleaned = -0.000186448 Jy
! Component: 1700  -  total flux cleaned = -0.000117709 Jy
! Component: 1750  -  total flux cleaned = -0.00018621 Jy
! Component: 1800  -  total flux cleaned = -0.000186123 Jy
! Component: 1850  -  total flux cleaned = -0.000186164 Jy
! Component: 1900  -  total flux cleaned = -0.000141079 Jy
! Component: 1950  -  total flux cleaned = -0.000185716 Jy
! Component: 2000  -  total flux cleaned = -0.000118739 Jy
! Total flux subtracted in 2048 components = -0.000118747 Jy
! Clean residual min=-0.001273 max=0.001107 Jy/beam
! Clean residual mean=-0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.970662 Jy
keep
! Adding 195 model components to the UV plane model.
! The established model now contains 276 components and 0.970662 Jy
![Exited script file: muppet]
wmap "J1058+8114_X_2010_06_23_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6401 x 0.6441 at 32.92 degrees (North through East)
! Clean map  min=-0.0014341  max=0.79621 Jy/beam
! Writing clean map to FITS file: J1058+8114_X_2010_06_23_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.796211 
invert
! Inverting map 
! Your choice of large map pixels excluded 5.35% of the data.
!  The x-axis pixel size should ideally be below 0.1576 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1708 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000386804 
device "J1058+8114_X_2010_06_23_pus\_map.eps/VPS"
! Attempting to open device: 'J1058+8114_X_2010_06_23_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.145742 0.145742 0.291484 0.582967 1.16593 2.33187 4.66374 9.32748 18.655 37.3099 74.6198
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.796 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6401 x 0.6441 at 32.92 degrees (North through East)
! Clean map  min=-0.0014341  max=0.79621 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1058+8114_X_2010_06_23_pus\_map.gif/vgif"
! Attempting to open device: 'J1058+8114_X_2010_06_23_pus_map.gif/vgif'
mapplot cln