! Started logfile: /scr/pima/rdv76_uvs/J2258-2758_S_dfm.log on Fri Jun 15 05:58:31 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv76_uvs/J2258-2758_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J2258-2758_S_uva.fits
! AN table 1: 84 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.318783 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2258-2758
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 4820 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2258-2758_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 565 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 565 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 565 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 565 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.531773Jy  sigma=13.426373
! Fit after  self-cal, rms=0.361703Jy  sigma=3.184791
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.522 mas, bmaj=8.336 mas, bpa=-1.708 degrees
! Estimated noise=1.85304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.780353 Jy
! Component: 100  -  total flux cleaned = 1.00687 Jy
! Total flux subtracted in 100 components = 1.00687 Jy
! Clean residual min=-0.042064 max=0.110216 Jy/beam
! Clean residual mean=0.000302 rms=0.013149 Jy/beam
! Combined flux in latest and established models = 1.00687 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 1.00687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.340279Jy  sigma=2.946618
! Fit after  self-cal, rms=0.339719Jy  sigma=2.942066
! Inverting map 
! Added new window around map position (-3, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121958 Jy
! Component: 100  -  total flux cleaned = 0.189069 Jy
! Total flux subtracted in 100 components = 0.189069 Jy
! Clean residual min=-0.033276 max=0.059547 Jy/beam
! Clean residual mean=0.000145 rms=0.008997 Jy/beam
! Combined flux in latest and established models = 1.19594 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 1.19594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.275835Jy  sigma=2.336962
! Fit after  self-cal, rms=0.274376Jy  sigma=2.324652
! Inverting map 
! Added new window around map position (-7.5, -9.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0567511 Jy
! Component: 100  -  total flux cleaned = 0.0910245 Jy
! Total flux subtracted in 100 components = 0.0910245 Jy
! Clean residual min=-0.031260 max=0.047553 Jy/beam
! Clean residual mean=0.000081 rms=0.007691 Jy/beam
! Combined flux in latest and established models = 1.28696 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 1.28696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.257816Jy  sigma=2.174014
! Fit after  self-cal, rms=0.256427Jy  sigma=2.161702
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=9.565 mas, bpa=-1.546 degrees
! Estimated noise=1.44357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0416015 Jy
! Component: 100  -  total flux cleaned = 0.0631532 Jy
! Component: 150  -  total flux cleaned = 0.070836 Jy
! Component: 200  -  total flux cleaned = 0.0718104 Jy
! Total flux subtracted in 200 components = 0.0718104 Jy
! Clean residual min=-0.030100 max=0.033369 Jy/beam
! Clean residual mean=0.000089 rms=0.007031 Jy/beam
! Combined flux in latest and established models = 1.35877 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 1.35877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.249235Jy  sigma=2.099269
! Fit after  self-cal, rms=0.248528Jy  sigma=2.092657
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.833 x 9.565 at -1.546 degrees (North through East)
! Clean map  min=-0.027278  max=0.99327 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.89     KK        1.08     KP        1.13     
!   LA        1.04     MK        1.05     NL        1.09     OV        0.98     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.88     KK        1.05     KP        1.01     
!   LA        1.03     MK        1.03     NL        1.10     OV        0.96     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.86     KK        1.04     KP        1.00     
!   LA        1.03     MK        0.97     NL        1.05     OV        0.98     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.84     KK        1.05     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.08     OV        0.95     
!   PT        0.97     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.248528Jy  sigma=2.092657
! Fit after  self-cal, rms=0.227492Jy  sigma=1.873804
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.898 mas, bmaj=9.729 mas, bpa=-1.635 degrees
! Estimated noise=1.45011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00566104 Jy
! Component: 100  -  total flux cleaned = -0.00771619 Jy
! Component: 150  -  total flux cleaned = -0.00801791 Jy
! Component: 200  -  total flux cleaned = -0.00829804 Jy
! Total flux subtracted in 200 components = -0.00829804 Jy
! Clean residual min=-0.016521 max=0.013390 Jy/beam
! Clean residual mean=0.000001 rms=0.003301 Jy/beam
! Combined flux in latest and established models = 1.35047 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 1.35047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226485Jy  sigma=1.866712
! Fit after  self-cal, rms=0.226708Jy  sigma=1.865619
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226708Jy  sigma=1.865619
! Fit after  self-cal, rms=0.225811Jy  sigma=1.850462
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.893 mas, bmaj=9.695 mas, bpa=-1.488 degrees
! Estimated noise=1.45256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0040043 Jy
! Component: 100  -  total flux cleaned = -0.00508676 Jy
! Component: 150  -  total flux cleaned = -0.00598814 Jy
! Component: 200  -  total flux cleaned = -0.00598775 Jy
! Total flux subtracted in 200 components = -0.00598775 Jy
! Clean residual min=-0.014634 max=0.012815 Jy/beam
! Clean residual mean=-0.000017 rms=0.002938 Jy/beam
! Combined flux in latest and established models = 1.34449 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 76 components and 1.34449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225174Jy  sigma=1.845832
! Fit after  self-cal, rms=0.225146Jy  sigma=1.845438
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032946 Jy
! Component: 100  -  total flux cleaned = 0.000145232 Jy
! Component: 150  -  total flux cleaned = 0.000142482 Jy
! Component: 200  -  total flux cleaned = -6.27915e-07 Jy
! Total flux subtracted in 200 components = -6.27915e-07 Jy
! Clean residual min=-0.014130 max=0.012605 Jy/beam
! Clean residual mean=-0.000016 rms=0.002901 Jy/beam
! Combined flux in latest and established models = 1.34449 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 1.34449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224874Jy  sigma=1.843662
! Fit after  self-cal, rms=0.224865Jy  sigma=1.843487
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224865Jy  sigma=1.843487
! Fit after  self-cal, rms=0.224357Jy  sigma=1.827200
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=9.685 mas, bpa=-1.429 degrees
! Estimated noise=1.45213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00209623 Jy
! Component: 100  -  total flux cleaned = -0.00240006 Jy
! Component: 150  -  total flux cleaned = -0.00280891 Jy
! Component: 200  -  total flux cleaned = -0.00292727 Jy
! Total flux subtracted in 200 components = -0.00292727 Jy
! Clean residual min=-0.012957 max=0.011344 Jy/beam
! Clean residual mean=-0.000042 rms=0.002662 Jy/beam
! Combined flux in latest and established models = 1.34156 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 1.34156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224120Jy  sigma=1.825684
! Fit after  self-cal, rms=0.224140Jy  sigma=1.825515
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355633 Jy
! Component: 100  -  total flux cleaned = -2.17287e-06 Jy
! Component: 150  -  total flux cleaned = -0.000113618 Jy
! Component: 200  -  total flux cleaned = -0.000318814 Jy
! Total flux subtracted in 200 components = -0.000318814 Jy
! Clean residual min=-0.012825 max=0.011119 Jy/beam
! Clean residual mean=-0.000041 rms=0.002646 Jy/beam
! Combined flux in latest and established models = 1.34124 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 1.34124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224000Jy  sigma=1.824739
! Fit after  self-cal, rms=0.223989Jy  sigma=1.824656
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223989Jy  sigma=1.824656
! Fit after  self-cal, rms=0.224086Jy  sigma=1.824426
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.052 mas, bmaj=18.65 mas, bpa=5.008 degrees
! Estimated noise=1.90733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352722 Jy
! Component: 100  -  total flux cleaned = -0.000493955 Jy
! Component: 150  -  total flux cleaned = -0.000504203 Jy
! Component: 200  -  total flux cleaned = -0.000498885 Jy
! Total flux subtracted in 200 components = -0.000498885 Jy
! Clean residual min=-0.011943 max=0.012172 Jy/beam
! Clean residual mean=-0.000091 rms=0.003163 Jy/beam
! Combined flux in latest and established models = 1.34074 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 110 components and 1.34074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224014Jy  sigma=1.824419
! Fit after  self-cal, rms=0.224016Jy  sigma=1.824195
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000797864 Jy
! Component: 100  -  total flux cleaned = 0.00053547 Jy
! Component: 150  -  total flux cleaned = 0.000393019 Jy
! Component: 200  -  total flux cleaned = 0.000396146 Jy
! Total flux subtracted in 200 components = 0.000396146 Jy
! Clean residual min=-0.011889 max=0.012226 Jy/beam
! Clean residual mean=-0.000092 rms=0.003149 Jy/beam
! Combined flux in latest and established models = 1.34114 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 114 components and 1.34114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223975Jy  sigma=1.824131
! Fit after  self-cal, rms=0.223963Jy  sigma=1.824021
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=9.68 mas, bpa=-1.393 degrees
! Estimated noise=1.45177 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.894 x 9.68 at -1.393 degrees (North through East)
! Clean map  min=-0.011924  max=0.98757 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223963Jy  sigma=1.824021
! Fit after  self-cal, rms=0.212666Jy  sigma=1.653356
! Inverting map and beam 
! Estimated beam: bmin=2.898 mas, bmaj=9.677 mas, bpa=-1.398 degrees
! Estimated noise=1.45246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000467076 Jy
! Component: 100  -  total flux cleaned = -0.000749839 Jy
! Component: 150  -  total flux cleaned = -0.000868732 Jy
! Component: 200  -  total flux cleaned = -0.000867364 Jy
! Total flux subtracted in 200 components = -0.000867364 Jy
! Clean residual min=-0.011460 max=0.011011 Jy/beam
! Clean residual mean=-0.000040 rms=0.002603 Jy/beam
! Combined flux in latest and established models = 1.34027 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 117 components and 1.34027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212451Jy  sigma=1.651930
! Fit after  self-cal, rms=0.212431Jy  sigma=1.651792
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205555 Jy
! Component: 100  -  total flux cleaned = -0.000413808 Jy
! Component: 150  -  total flux cleaned = -0.000590174 Jy
! Component: 200  -  total flux cleaned = -0.00058637 Jy
! Total flux subtracted in 200 components = -0.00058637 Jy
! Clean residual min=-0.011327 max=0.010808 Jy/beam
! Clean residual mean=-0.000039 rms=0.002591 Jy/beam
! Combined flux in latest and established models = 1.33968 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 122 components and 1.33968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212330Jy  sigma=1.651158
! Fit after  self-cal, rms=0.212324Jy  sigma=1.651077
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212324Jy  sigma=1.651077
! Fit after  self-cal, rms=0.212472Jy  sigma=1.650761
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.535 mas, bmaj=8.287 mas, bpa=-1.179 degrees
! Estimated noise=1.90043 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.784469 Jy
! Component: 100  -  total flux cleaned = 1.02236 Jy
! Component: 150  -  total flux cleaned = 1.13631 Jy
! Component: 200  -  total flux cleaned = 1.19923 Jy
! Total flux subtracted in 200 components = 1.19923 Jy
! Clean residual min=-0.020001 max=0.032809 Jy/beam
! Clean residual mean=0.000082 rms=0.005715 Jy/beam
! Combined flux in latest and established models = 1.19923 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 1.19923 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.897 mas, bmaj=9.67 mas, bpa=-1.374 degrees
! Estimated noise=1.45161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562594 Jy
! Component: 100  -  total flux cleaned = 0.0869353 Jy
! Component: 150  -  total flux cleaned = 0.106079 Jy
! Component: 200  -  total flux cleaned = 0.118373 Jy
! Total flux subtracted in 200 components = 0.118373 Jy
! Clean residual min=-0.011783 max=0.013177 Jy/beam
! Clean residual mean=-0.000005 rms=0.002891 Jy/beam
! Combined flux in latest and established models = 1.3176 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 58 components and 1.3176 Jy
! Inverting map 
! Added new window around map position (-14.5, -8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127389 Jy
! Component: 100  -  total flux cleaned = 0.0189668 Jy
! Component: 150  -  total flux cleaned = 0.021903 Jy
! Component: 200  -  total flux cleaned = 0.0243327 Jy
! Total flux subtracted in 200 components = 0.0243327 Jy
! Clean residual min=-0.011588 max=0.011135 Jy/beam
! Clean residual mean=-0.000047 rms=0.002594 Jy/beam
! Combined flux in latest and established models = 1.34194 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 1.34194 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.047 mas, bmaj=18.68 mas, bpa=5.1 degrees
! Estimated noise=1.90789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452744 Jy
! Component: 100  -  total flux cleaned = 0.00495733 Jy
! Component: 150  -  total flux cleaned = 0.00533991 Jy
! Component: 200  -  total flux cleaned = 0.00551498 Jy
! Total flux subtracted in 200 components = 0.00551498 Jy
! Clean residual min=-0.010897 max=0.011917 Jy/beam
! Clean residual mean=-0.000111 rms=0.002981 Jy/beam
! Combined flux in latest and established models = 1.34745 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.32895e-06 Jy
! Component: 100  -  total flux cleaned = 7.21949e-05 Jy
! Component: 150  -  total flux cleaned = 0.000146938 Jy
! Component: 200  -  total flux cleaned = 0.000282418 Jy
! Total flux subtracted in 200 components = 0.000282418 Jy
! Clean residual min=-0.010815 max=0.011803 Jy/beam
! Clean residual mean=-0.000112 rms=0.002970 Jy/beam
! Combined flux in latest and established models = 1.34773 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 91 components and 1.34773 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.897 mas, bmaj=9.67 mas, bpa=-1.374 degrees
! Estimated noise=1.45161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00305732 Jy
! Component: 100  -  total flux cleaned = -0.0030716 Jy
! Component: 150  -  total flux cleaned = -0.00227791 Jy
! Component: 200  -  total flux cleaned = -0.0018526 Jy
! Total flux subtracted in 200 components = -0.0018526 Jy
! Clean residual min=-0.011050 max=0.010669 Jy/beam
! Clean residual mean=-0.000052 rms=0.002535 Jy/beam
! Combined flux in latest and established models = 1.34588 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 109 components and 1.34588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212261Jy  sigma=1.649544
! Fit after  self-cal, rms=0.212098Jy  sigma=1.648161
wmodel J2258-2758_S_map.mod
! Writing 109 model components to file: J2258-2758_S_map.mod
wobs   J2258-2758_S_uvs.fits
! Writing UV FITS file: J2258-2758_S_uvs.fits
wwins  J2258-2758_S_map.win
! wwins: Wrote 4 windows to J2258-2758_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199737 Jy
! Component: 100  -  total flux cleaned = -0.00305538 Jy
! Component: 150  -  total flux cleaned = -0.00455876 Jy
! Component: 200  -  total flux cleaned = -0.00504156 Jy
! Component: 250  -  total flux cleaned = -0.00504022 Jy
! Component: 300  -  total flux cleaned = -0.00549412 Jy
! Component: 350  -  total flux cleaned = -0.0059362 Jy
! Component: 400  -  total flux cleaned = -0.00608196 Jy
! Component: 450  -  total flux cleaned = -0.00636334 Jy
! Component: 500  -  total flux cleaned = -0.00663939 Jy
! Component: 550  -  total flux cleaned = -0.0069088 Jy
! Component: 600  -  total flux cleaned = -0.00717461 Jy
! Component: 650  -  total flux cleaned = -0.00756385 Jy
! Component: 700  -  total flux cleaned = -0.00807309 Jy
! Component: 750  -  total flux cleaned = -0.00869784 Jy
! Component: 800  -  total flux cleaned = -0.00918791 Jy
! Component: 850  -  total flux cleaned = -0.00967107 Jy
! Component: 900  -  total flux cleaned = -0.0102648 Jy
! Component: 950  -  total flux cleaned = -0.0108492 Jy
! Component: 1000  -  total flux cleaned = -0.0115396 Jy
! Component: 1050  -  total flux cleaned = -0.0118787 Jy
! Component: 1100  -  total flux cleaned = -0.0122132 Jy
! Component: 1150  -  total flux cleaned = -0.0123234 Jy
! Component: 1200  -  total flux cleaned = -0.012215 Jy
! Component: 1250  -  total flux cleaned = -0.0126465 Jy
! Component: 1300  -  total flux cleaned = -0.0126467 Jy
! Component: 1350  -  total flux cleaned = -0.0122284 Jy
! Component: 1400  -  total flux cleaned = -0.0128478 Jy
! Component: 1450  -  total flux cleaned = -0.0128466 Jy
! Component: 1500  -  total flux cleaned = -0.0128465 Jy
! Component: 1550  -  total flux cleaned = -0.0126481 Jy
! Component: 1600  -  total flux cleaned = -0.0123527 Jy
! Component: 1650  -  total flux cleaned = -0.0123525 Jy
! Component: 1700  -  total flux cleaned = -0.0121597 Jy
! Component: 1750  -  total flux cleaned = -0.0123516 Jy
! Component: 1800  -  total flux cleaned = -0.0124442 Jy
! Component: 1850  -  total flux cleaned = -0.0116934 Jy
! Component: 1900  -  total flux cleaned = -0.0117874 Jy
! Component: 1950  -  total flux cleaned = -0.0118782 Jy
! Component: 2000  -  total flux cleaned = -0.0115138 Jy
! Component: 2050  -  total flux cleaned = -0.0118759 Jy
! Component: 2100  -  total flux cleaned = -0.0115167 Jy
! Component: 2150  -  total flux cleaned = -0.0117838 Jy
! Component: 2200  -  total flux cleaned = -0.0118712 Jy
! Component: 2250  -  total flux cleaned = -0.0116962 Jy
! Component: 2300  -  total flux cleaned = -0.0119565 Jy
! Component: 2350  -  total flux cleaned = -0.0117851 Jy
! Component: 2400  -  total flux cleaned = -0.0117859 Jy
! Component: 2450  -  total flux cleaned = -0.0117027 Jy
! Component: 2500  -  total flux cleaned = -0.0119525 Jy
! Component: 2550  -  total flux cleaned = -0.0119511 Jy
! Component: 2600  -  total flux cleaned = -0.0120323 Jy
! Component: 2650  -  total flux cleaned = -0.0118683 Jy
! Component: 2700  -  total flux cleaned = -0.011544 Jy
! Component: 2750  -  total flux cleaned = -0.0115441 Jy
! Component: 2800  -  total flux cleaned = -0.0113051 Jy
! Component: 2850  -  total flux cleaned = -0.011305 Jy
! Component: 2900  -  total flux cleaned = -0.011226 Jy
! Component: 2950  -  total flux cleaned = -0.0113817 Jy
! Component: 3000  -  total flux cleaned = -0.0113043 Jy
! Component: 3050  -  total flux cleaned = -0.0109208 Jy
! Component: 3100  -  total flux cleaned = -0.0110738 Jy
! Component: 3150  -  total flux cleaned = -0.0108462 Jy
! Component: 3200  -  total flux cleaned = -0.0106201 Jy
! Component: 3250  -  total flux cleaned = -0.0105447 Jy
! Component: 3300  -  total flux cleaned = -0.0102478 Jy
! Component: 3350  -  total flux cleaned = -0.0101745 Jy
! Component: 3400  -  total flux cleaned = -0.0103208 Jy
! Component: 3450  -  total flux cleaned = -0.0101022 Jy
! Component: 3500  -  total flux cleaned = -0.0103197 Jy
! Component: 3550  -  total flux cleaned = -0.0100322 Jy
! Component: 3600  -  total flux cleaned = -0.00996158 Jy
! Component: 3650  -  total flux cleaned = -0.0100329 Jy
! Component: 3700  -  total flux cleaned = -0.00982194 Jy
! Component: 3750  -  total flux cleaned = -0.00982204 Jy
! Component: 3800  -  total flux cleaned = -0.00961355 Jy
! Component: 3850  -  total flux cleaned = -0.00961405 Jy
! Component: 3900  -  total flux cleaned = -0.00975203 Jy
! Component: 3950  -  total flux cleaned = -0.00975203 Jy
! Component: 4000  -  total flux cleaned = -0.00988799 Jy
! Component: 4050  -  total flux cleaned = -0.00961732 Jy
! Total flux subtracted in 4096 components = -0.00975155 Jy
! Clean residual min=-0.003641 max=0.004336 Jy/beam
! Clean residual mean=-0.000026 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 1.33613 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 418 components and 1.33613 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J2258-2758_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.897 x 9.67 at -1.374 degrees (North through East)
! Clean map  min=-0.0095383  max=0.98945 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J2258-2758_S_map.fits
wmodel /scr/pima/rdv76_uvs/J2258-2758_S_map.mod
! Writing 418 model components to file: /scr/pima/rdv76_uvs/J2258-2758_S_map.mod
wobs   /scr/pima/rdv76_uvs/J2258-2758_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J2258-2758_S_uvs.fits
wwins  /scr/pima/rdv76_uvs/J2258-2758_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rdv76_uvs/J2258-2758_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.989452 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00126434 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.383345 0.383345 0.76669 1.53338 3.06676 6.13352 12.267 24.5341 49.0682 98.1363
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0037 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.989 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  782.584 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J2258-2758_S_dfm.log closed on Fri Jun 15 05:58:36 2018