! Started logfile: /scr/pima/rdv76_uvs/J2129-1538_X_dfm.log on Fri Jun 15 03:57:31 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv76_uvs/J2129-1538_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J2129-1538_X_uva.fits
! AN table 1: 152 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.268713 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2129-1538
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2129-1538_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.541744Jy  sigma=16.429440
! Fit after  self-cal, rms=0.305714Jy  sigma=3.216352
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.612% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7038 mas, bmaj=1.894 mas, bpa=-0.5193 degrees
! Estimated noise=1.33566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.86263 Jy
! Component: 100  -  total flux cleaned = 1.09848 Jy
! Total flux subtracted in 100 components = 1.09848 Jy
! Clean residual min=-0.026804 max=0.097622 Jy/beam
! Clean residual mean=-0.000112 rms=0.008746 Jy/beam
! Combined flux in latest and established models = 1.09848 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.09848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242900Jy  sigma=2.518725
! Fit after  self-cal, rms=0.242845Jy  sigma=2.518109
! Inverting map 
! Your choice of large map pixels excluded 0.612% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104445 Jy
! Component: 100  -  total flux cleaned = 0.162685 Jy
! Total flux subtracted in 100 components = 0.162685 Jy
! Clean residual min=-0.014859 max=0.029322 Jy/beam
! Clean residual mean=-0.000050 rms=0.003921 Jy/beam
! Combined flux in latest and established models = 1.26116 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 1.26116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187114Jy  sigma=1.848850
! Fit after  self-cal, rms=0.187013Jy  sigma=1.847928
! Inverting map 
! Your choice of large map pixels excluded 0.612% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.034847 Jy
! Component: 100  -  total flux cleaned = 0.0560832 Jy
! Total flux subtracted in 100 components = 0.0560832 Jy
! Clean residual min=-0.011899 max=0.013058 Jy/beam
! Clean residual mean=-0.000028 rms=0.002890 Jy/beam
! Combined flux in latest and established models = 1.31725 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 31 components and 1.31725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179048Jy  sigma=1.749336
! Fit after  self-cal, rms=0.179007Jy  sigma=1.748921
! Inverting map 
! Your choice of large map pixels excluded 0.612% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.612% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7697 mas, bmaj=2.056 mas, bpa=-1.441 degrees
! Estimated noise=0.882365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181235 Jy
! Component: 100  -  total flux cleaned = 0.0284812 Jy
! Component: 150  -  total flux cleaned = 0.0353051 Jy
! Component: 200  -  total flux cleaned = 0.0399193 Jy
! Total flux subtracted in 200 components = 0.0399193 Jy
! Clean residual min=-0.011028 max=0.009500 Jy/beam
! Clean residual mean=-0.000003 rms=0.002287 Jy/beam
! Combined flux in latest and established models = 1.35717 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 56 components and 1.35717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177013Jy  sigma=1.725914
! Fit after  self-cal, rms=0.176926Jy  sigma=1.725186
! Inverting map 
! Your choice of large map pixels excluded 0.612% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7697 x 2.056 at -1.441 degrees (North through East)
! Clean map  min=-0.0098025  max=1.1128 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KK        1.02     KP        1.00     
!   LA        0.96     MK        0.98     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     KK        1.02     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     KK        0.98     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.02     OV        1.01     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KK        1.03     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.99     OV        1.01     
!   PT        1.02     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.176926Jy  sigma=1.725186
! Fit after  self-cal, rms=0.174668Jy  sigma=1.704594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7713 mas, bmaj=2.072 mas, bpa=-1.387 degrees
! Estimated noise=0.895283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139398 Jy
! Component: 100  -  total flux cleaned = -0.000120602 Jy
! Component: 150  -  total flux cleaned = -0.000236264 Jy
! Component: 200  -  total flux cleaned = -0.000237193 Jy
! Total flux subtracted in 200 components = -0.000237193 Jy
! Clean residual min=-0.007443 max=0.007091 Jy/beam
! Clean residual mean=0.000004 rms=0.001709 Jy/beam
! Combined flux in latest and established models = 1.35693 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 1.35693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174470Jy  sigma=1.702781
! Fit after  self-cal, rms=0.174468Jy  sigma=1.702713
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174468Jy  sigma=1.702713
! Fit after  self-cal, rms=0.174101Jy  sigma=1.698155
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7717 mas, bmaj=2.073 mas, bpa=-1.43 degrees
! Estimated noise=0.895353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000338109 Jy
! Component: 100  -  total flux cleaned = -0.000233452 Jy
! Component: 150  -  total flux cleaned = -0.000145863 Jy
! Component: 200  -  total flux cleaned = -0.000222501 Jy
! Total flux subtracted in 200 components = -0.000222501 Jy
! Clean residual min=-0.007219 max=0.006994 Jy/beam
! Clean residual mean=0.000004 rms=0.001630 Jy/beam
! Combined flux in latest and established models = 1.35671 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 1.35671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174002Jy  sigma=1.697268
! Fit after  self-cal, rms=0.173999Jy  sigma=1.697219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.47016e-05 Jy
! Component: 100  -  total flux cleaned = 1.41312e-05 Jy
! Component: 150  -  total flux cleaned = 1.47378e-05 Jy
! Component: 200  -  total flux cleaned = -4.65e-05 Jy
! Total flux subtracted in 200 components = -4.65e-05 Jy
! Clean residual min=-0.007124 max=0.006946 Jy/beam
! Clean residual mean=0.000004 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 1.35666 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 1.35666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173945Jy  sigma=1.696737
! Fit after  self-cal, rms=0.173940Jy  sigma=1.696704
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173940Jy  sigma=1.696704
! Fit after  self-cal, rms=0.173513Jy  sigma=1.694079
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7714 mas, bmaj=2.073 mas, bpa=-1.457 degrees
! Estimated noise=0.895182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.94039e-05 Jy
! Component: 100  -  total flux cleaned = -0.000293382 Jy
! Component: 150  -  total flux cleaned = -0.000469128 Jy
! Component: 200  -  total flux cleaned = -0.000679614 Jy
! Total flux subtracted in 200 components = -0.000679614 Jy
! Clean residual min=-0.007158 max=0.006854 Jy/beam
! Clean residual mean=0.000005 rms=0.001574 Jy/beam
! Combined flux in latest and established models = 1.35598 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 1.35598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173463Jy  sigma=1.693625
! Fit after  self-cal, rms=0.173457Jy  sigma=1.693590
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.38808e-05 Jy
! Component: 100  -  total flux cleaned = -0.000174644 Jy
! Component: 150  -  total flux cleaned = -0.000219899 Jy
! Component: 200  -  total flux cleaned = -0.00017885 Jy
! Total flux subtracted in 200 components = -0.00017885 Jy
! Clean residual min=-0.007134 max=0.006887 Jy/beam
! Clean residual mean=0.000005 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 1.3558 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 1.3558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173433Jy  sigma=1.693359
! Fit after  self-cal, rms=0.173431Jy  sigma=1.693335
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173431Jy  sigma=1.693335
! Fit after  self-cal, rms=0.173292Jy  sigma=1.693245
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=2.466 mas, bmaj=4.622 mas, bpa=4.568 degrees
! Estimated noise=1.18993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149896 Jy
! Component: 100  -  total flux cleaned = 0.000221986 Jy
! Component: 150  -  total flux cleaned = 0.000189344 Jy
! Component: 200  -  total flux cleaned = 0.000161483 Jy
! Total flux subtracted in 200 components = 0.000161483 Jy
! Clean residual min=-0.007890 max=0.008124 Jy/beam
! Clean residual mean=0.000011 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 1.35596 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 1.35596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173299Jy  sigma=1.693199
! Fit after  self-cal, rms=0.173292Jy  sigma=1.693168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42.8, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00699831 Jy
! Component: 100  -  total flux cleaned = 0.00903718 Jy
! Component: 150  -  total flux cleaned = 0.00958485 Jy
! Component: 200  -  total flux cleaned = 0.00958198 Jy
! Total flux subtracted in 200 components = 0.00958198 Jy
! Clean residual min=-0.006553 max=0.005739 Jy/beam
! Clean residual mean=0.000006 rms=0.001526 Jy/beam
! Combined flux in latest and established models = 1.36555 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 135 components and 1.36555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173107Jy  sigma=1.691256
! Fit after  self-cal, rms=0.173097Jy  sigma=1.691110
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.771 mas, bmaj=2.073 mas, bpa=-1.48 degrees
! Estimated noise=0.894836 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.771 x 2.073 at -1.48 degrees (North through East)
! Clean map  min=-0.0054284  max=1.1166 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173097Jy  sigma=1.691110
! Fit after  self-cal, rms=0.159219Jy  sigma=1.531079
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7706 mas, bmaj=2.073 mas, bpa=-1.495 degrees
! Estimated noise=0.894709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116387 Jy
! Component: 100  -  total flux cleaned = 0.00182678 Jy
! Component: 150  -  total flux cleaned = 0.00254654 Jy
! Component: 200  -  total flux cleaned = 0.00332587 Jy
! Total flux subtracted in 200 components = 0.00332587 Jy
! Clean residual min=-0.005664 max=0.005665 Jy/beam
! Clean residual mean=0.000005 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 1.36887 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 167 components and 1.36887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158904Jy  sigma=1.528307
! Fit after  self-cal, rms=0.158903Jy  sigma=1.528232
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000761627 Jy
! Component: 100  -  total flux cleaned = 0.00133268 Jy
! Component: 150  -  total flux cleaned = 0.00197304 Jy
! Component: 200  -  total flux cleaned = 0.0022748 Jy
! Total flux subtracted in 200 components = 0.0022748 Jy
! Clean residual min=-0.005450 max=0.005490 Jy/beam
! Clean residual mean=0.000005 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 1.37115 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 183 components and 1.37115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158741Jy  sigma=1.526918
! Fit after  self-cal, rms=0.158740Jy  sigma=1.526893
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158740Jy  sigma=1.526893
! Fit after  self-cal, rms=0.158705Jy  sigma=1.526688
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.6971 mas, bmaj=1.897 mas, bpa=-0.25 degrees
! Estimated noise=1.33094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.862646 Jy
! Component: 100  -  total flux cleaned = 1.10186 Jy
! Component: 150  -  total flux cleaned = 1.20592 Jy
! Component: 200  -  total flux cleaned = 1.26349 Jy
! Total flux subtracted in 200 components = 1.26349 Jy
! Clean residual min=-0.014018 max=0.028966 Jy/beam
! Clean residual mean=-0.000025 rms=0.003540 Jy/beam
! Combined flux in latest and established models = 1.26349 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.26349 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7704 mas, bmaj=2.073 mas, bpa=-1.493 degrees
! Estimated noise=0.894815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0431682 Jy
! Component: 100  -  total flux cleaned = 0.0656312 Jy
! Component: 150  -  total flux cleaned = 0.0777697 Jy
! Component: 200  -  total flux cleaned = 0.0861809 Jy
! Total flux subtracted in 200 components = 0.0861809 Jy
! Clean residual min=-0.007381 max=0.007657 Jy/beam
! Clean residual mean=0.000003 rms=0.001699 Jy/beam
! Combined flux in latest and established models = 1.34967 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 45 components and 1.34967 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Added new window around map position (-2, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598519 Jy
! Component: 100  -  total flux cleaned = 0.00876343 Jy
! Component: 150  -  total flux cleaned = 0.0110239 Jy
! Component: 200  -  total flux cleaned = 0.0125205 Jy
! Total flux subtracted in 200 components = 0.0125205 Jy
! Clean residual min=-0.006187 max=0.006456 Jy/beam
! Clean residual mean=0.000004 rms=0.001479 Jy/beam
! Combined flux in latest and established models = 1.36219 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 76 components and 1.36219 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Added new window around map position (-24.4, -13.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00370483 Jy
! Component: 100  -  total flux cleaned = 0.0056046 Jy
! Component: 150  -  total flux cleaned = 0.00655203 Jy
! Component: 200  -  total flux cleaned = 0.00774063 Jy
! Total flux subtracted in 200 components = 0.00774063 Jy
! Clean residual min=-0.005883 max=0.005452 Jy/beam
! Clean residual mean=0.000003 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 1.36993 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 92 components and 1.36993 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=2.466 mas, bmaj=4.622 mas, bpa=4.533 degrees
! Estimated noise=1.19081 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034202 Jy
! Component: 100  -  total flux cleaned = 0.00501618 Jy
! Component: 150  -  total flux cleaned = 0.00652045 Jy
! Component: 200  -  total flux cleaned = 0.00757038 Jy
! Total flux subtracted in 200 components = 0.00757038 Jy
! Clean residual min=-0.006071 max=0.005272 Jy/beam
! Clean residual mean=0.000008 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 1.3775 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029038 Jy
! Component: 100  -  total flux cleaned = 0.000624576 Jy
! Component: 150  -  total flux cleaned = 0.000932269 Jy
! Component: 200  -  total flux cleaned = 0.00127647 Jy
! Total flux subtracted in 200 components = 0.00127647 Jy
! Clean residual min=-0.005955 max=0.005199 Jy/beam
! Clean residual mean=0.000008 rms=0.001379 Jy/beam
! Combined flux in latest and established models = 1.37878 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 138 components and 1.37878 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! Estimated beam: bmin=0.7704 mas, bmaj=2.073 mas, bpa=-1.493 degrees
! Estimated noise=0.894815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00185011 Jy
! Component: 100  -  total flux cleaned = -0.00158559 Jy
! Component: 150  -  total flux cleaned = -0.00109031 Jy
! Component: 200  -  total flux cleaned = -0.000742108 Jy
! Total flux subtracted in 200 components = -0.000742108 Jy
! Clean residual min=-0.005439 max=0.005201 Jy/beam
! Clean residual mean=0.000004 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 1.37804 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 152 components and 1.37804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158499Jy  sigma=1.524900
! Fit after  self-cal, rms=0.158468Jy  sigma=1.524629
wmodel J2129-1538_X_map.mod
! Writing 152 model components to file: J2129-1538_X_map.mod
wobs   J2129-1538_X_uvs.fits
! Writing UV FITS file: J2129-1538_X_uvs.fits
wwins  J2129-1538_X_map.win
! wwins: Wrote 5 windows to J2129-1538_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0016167 Jy
! Component: 100  -  total flux cleaned = -0.00271817 Jy
! Component: 150  -  total flux cleaned = -0.00367475 Jy
! Component: 200  -  total flux cleaned = -0.00442402 Jy
! Component: 250  -  total flux cleaned = -0.00490702 Jy
! Component: 300  -  total flux cleaned = -0.00537498 Jy
! Component: 350  -  total flux cleaned = -0.00560292 Jy
! Component: 400  -  total flux cleaned = -0.00582563 Jy
! Component: 450  -  total flux cleaned = -0.00604219 Jy
! Component: 500  -  total flux cleaned = -0.00611195 Jy
! Component: 550  -  total flux cleaned = -0.00618048 Jy
! Component: 600  -  total flux cleaned = -0.00597744 Jy
! Component: 650  -  total flux cleaned = -0.00611171 Jy
! Component: 700  -  total flux cleaned = -0.00617633 Jy
! Component: 750  -  total flux cleaned = -0.0062412 Jy
! Component: 800  -  total flux cleaned = -0.00617778 Jy
! Component: 850  -  total flux cleaned = -0.00605218 Jy
! Component: 900  -  total flux cleaned = -0.00586747 Jy
! Component: 950  -  total flux cleaned = -0.00574671 Jy
! Component: 1000  -  total flux cleaned = -0.00562745 Jy
! Component: 1050  -  total flux cleaned = -0.00562686 Jy
! Component: 1100  -  total flux cleaned = -0.00551021 Jy
! Component: 1150  -  total flux cleaned = -0.00551006 Jy
! Component: 1200  -  total flux cleaned = -0.00522731 Jy
! Component: 1250  -  total flux cleaned = -0.0048932 Jy
! Component: 1300  -  total flux cleaned = -0.00483845 Jy
! Component: 1350  -  total flux cleaned = -0.0049461 Jy
! Component: 1400  -  total flux cleaned = -0.00467647 Jy
! Component: 1450  -  total flux cleaned = -0.00441117 Jy
! Component: 1500  -  total flux cleaned = -0.00420217 Jy
! Component: 1550  -  total flux cleaned = -0.00430596 Jy
! Component: 1600  -  total flux cleaned = -0.0042032 Jy
! Component: 1650  -  total flux cleaned = -0.00410223 Jy
! Component: 1700  -  total flux cleaned = -0.00400217 Jy
! Component: 1750  -  total flux cleaned = -0.00400266 Jy
! Component: 1800  -  total flux cleaned = -0.00395434 Jy
! Component: 1850  -  total flux cleaned = -0.00395538 Jy
! Component: 1900  -  total flux cleaned = -0.00390679 Jy
! Component: 1950  -  total flux cleaned = -0.00376438 Jy
! Component: 2000  -  total flux cleaned = -0.00362481 Jy
! Component: 2050  -  total flux cleaned = -0.00376408 Jy
! Component: 2100  -  total flux cleaned = -0.00348884 Jy
! Component: 2150  -  total flux cleaned = -0.00339733 Jy
! Component: 2200  -  total flux cleaned = -0.00330752 Jy
! Component: 2250  -  total flux cleaned = -0.00326243 Jy
! Component: 2300  -  total flux cleaned = -0.0032619 Jy
! Component: 2350  -  total flux cleaned = -0.0030432 Jy
! Component: 2400  -  total flux cleaned = -0.00291262 Jy
! Component: 2450  -  total flux cleaned = -0.00261278 Jy
! Component: 2500  -  total flux cleaned = -0.00265537 Jy
! Component: 2550  -  total flux cleaned = -0.00257081 Jy
! Component: 2600  -  total flux cleaned = -0.00252809 Jy
! Component: 2650  -  total flux cleaned = -0.00236251 Jy
! Component: 2700  -  total flux cleaned = -0.00224016 Jy
! Component: 2750  -  total flux cleaned = -0.00215905 Jy
! Component: 2800  -  total flux cleaned = -0.00203885 Jy
! Component: 2850  -  total flux cleaned = -0.001959 Jy
! Component: 2900  -  total flux cleaned = -0.00188027 Jy
! Component: 2950  -  total flux cleaned = -0.00172353 Jy
! Component: 3000  -  total flux cleaned = -0.00156816 Jy
! Component: 3050  -  total flux cleaned = -0.00145264 Jy
! Component: 3100  -  total flux cleaned = -0.00129997 Jy
! Component: 3150  -  total flux cleaned = -0.00122483 Jy
! Component: 3200  -  total flux cleaned = -0.00118683 Jy
! Component: 3250  -  total flux cleaned = -0.0011864 Jy
! Component: 3300  -  total flux cleaned = -0.000963671 Jy
! Component: 3350  -  total flux cleaned = -0.000890519 Jy
! Component: 3400  -  total flux cleaned = -0.000744688 Jy
! Component: 3450  -  total flux cleaned = -0.000780593 Jy
! Component: 3500  -  total flux cleaned = -0.000708657 Jy
! Component: 3550  -  total flux cleaned = -0.000566032 Jy
! Component: 3600  -  total flux cleaned = -0.000601534 Jy
! Component: 3650  -  total flux cleaned = -0.000460492 Jy
! Component: 3700  -  total flux cleaned = -0.000355983 Jy
! Component: 3750  -  total flux cleaned = -0.000251838 Jy
! Component: 3800  -  total flux cleaned = -0.000114093 Jy
! Component: 3850  -  total flux cleaned = -0.000114272 Jy
! Component: 3900  -  total flux cleaned = 9.03223e-05 Jy
! Component: 3950  -  total flux cleaned = 0.00015811 Jy
! Component: 4000  -  total flux cleaned = 0.000393578 Jy
! Component: 4050  -  total flux cleaned = 0.00046042 Jy
! Total flux subtracted in 4096 components = 0.000560186 Jy
! Clean residual min=-0.001756 max=0.001940 Jy/beam
! Clean residual mean=0.000001 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 1.3786 Jy
keep
! Adding 280 model components to the UV plane model.
! The established model now contains 432 components and 1.37859 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J2129-1538_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7704 x 2.073 at -1.493 degrees (North through East)
! Clean map  min=-0.0044534  max=1.1148 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J2129-1538_X_map.fits
wmodel /scr/pima/rdv76_uvs/J2129-1538_X_map.mod
! Writing 432 model components to file: /scr/pima/rdv76_uvs/J2129-1538_X_map.mod
wobs   /scr/pima/rdv76_uvs/J2129-1538_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J2129-1538_X_uvs.fits
wwins  /scr/pima/rdv76_uvs/J2129-1538_X_map.win
! wwins: Wrote 6 windows to /scr/pima/rdv76_uvs/J2129-1538_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.11485 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The x-axis pixel size should ideally be below 0.1979 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000556098 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.149643 0.149643 0.299286 0.598572 1.19714 2.39429 4.78858 9.57715 19.1543 38.3086 76.6172
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.114 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2004.77 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J2129-1538_X_dfm.log closed on Fri Jun 15 03:57:35 2018