! Started logfile: /scr/pima/rdv76_uvs/J2129-1538_S_dfm.log on Fri Jun 15 05:57:59 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv76_uvs/J2129-1538_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J2129-1538_S_uva.fits
! AN table 1: 152 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.268713 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2129-1538
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2129-1538_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1044 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.361513Jy  sigma=14.767652
! Fit after  self-cal, rms=0.263129Jy  sigma=2.767171
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.619 mas, bmaj=7.133 mas, bpa=-2.27 degrees
! Estimated noise=1.36012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.647848 Jy
! Component: 100  -  total flux cleaned = 0.79695 Jy
! Total flux subtracted in 100 components = 0.79695 Jy
! Clean residual min=-0.025955 max=0.056717 Jy/beam
! Clean residual mean=-0.000185 rms=0.006843 Jy/beam
! Combined flux in latest and established models = 0.79695 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.79695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212261Jy  sigma=2.214771
! Fit after  self-cal, rms=0.212241Jy  sigma=2.214670
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0601545 Jy
! Component: 100  -  total flux cleaned = 0.0897674 Jy
! Total flux subtracted in 100 components = 0.0897674 Jy
! Clean residual min=-0.021933 max=0.023460 Jy/beam
! Clean residual mean=-0.000132 rms=0.005116 Jy/beam
! Combined flux in latest and established models = 0.886717 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.886717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193562Jy  sigma=1.993919
! Fit after  self-cal, rms=0.193535Jy  sigma=1.993711
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.897 mas, bmaj=7.885 mas, bpa=-2.38 degrees
! Estimated noise=0.854903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192303 Jy
! Component: 100  -  total flux cleaned = 0.0226292 Jy
! Component: 150  -  total flux cleaned = 0.0229645 Jy
! Component: 200  -  total flux cleaned = 0.0232559 Jy
! Total flux subtracted in 200 components = 0.0232559 Jy
! Clean residual min=-0.024187 max=0.023278 Jy/beam
! Clean residual mean=-0.000084 rms=0.005173 Jy/beam
! Combined flux in latest and established models = 0.909973 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.909973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191467Jy  sigma=1.970515
! Fit after  self-cal, rms=0.191449Jy  sigma=1.970405
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.897 x 7.885 at -2.38 degrees (North through East)
! Clean map  min=-0.023614  max=0.83898 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.87     KK        1.02     KP        1.09     
!   LA        1.03     MK        1.00     NL        1.04     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.87     KK        1.03     KP        1.01     
!   LA        1.02     MK        0.99     NL        1.04     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.88     KK        1.02     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.86     KK        1.04     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.02     OV        0.96     
!   PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.191449Jy  sigma=1.970405
! Fit after  self-cal, rms=0.178655Jy  sigma=1.805847
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.907 mas, bmaj=7.999 mas, bpa=-2.061 degrees
! Estimated noise=0.867206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00369447 Jy
! Component: 100  -  total flux cleaned = -0.00391435 Jy
! Component: 150  -  total flux cleaned = -0.00425833 Jy
! Component: 200  -  total flux cleaned = -0.00457488 Jy
! Total flux subtracted in 200 components = -0.00457488 Jy
! Clean residual min=-0.007941 max=0.007428 Jy/beam
! Clean residual mean=-0.000033 rms=0.001825 Jy/beam
! Combined flux in latest and established models = 0.905398 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.905398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178485Jy  sigma=1.804160
! Fit after  self-cal, rms=0.178585Jy  sigma=1.803692
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178585Jy  sigma=1.803692
! Fit after  self-cal, rms=0.177872Jy  sigma=1.790075
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.914 mas, bmaj=8 mas, bpa=-2.009 degrees
! Estimated noise=0.867849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00190827 Jy
! Component: 100  -  total flux cleaned = -0.00198319 Jy
! Component: 150  -  total flux cleaned = -0.00209541 Jy
! Component: 200  -  total flux cleaned = -0.00217899 Jy
! Total flux subtracted in 200 components = -0.00217899 Jy
! Clean residual min=-0.007817 max=0.006320 Jy/beam
! Clean residual mean=-0.000033 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 0.903219 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.903219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177794Jy  sigma=1.789334
! Fit after  self-cal, rms=0.177810Jy  sigma=1.789279
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000346949 Jy
! Component: 100  -  total flux cleaned = -0.000412997 Jy
! Component: 150  -  total flux cleaned = -0.000439456 Jy
! Component: 200  -  total flux cleaned = -0.000532178 Jy
! Total flux subtracted in 200 components = -0.000532178 Jy
! Clean residual min=-0.007818 max=0.006322 Jy/beam
! Clean residual mean=-0.000034 rms=0.001652 Jy/beam
! Combined flux in latest and established models = 0.902687 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.902687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177798Jy  sigma=1.789182
! Fit after  self-cal, rms=0.177798Jy  sigma=1.789160
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177798Jy  sigma=1.789160
! Fit after  self-cal, rms=0.177804Jy  sigma=1.786171
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=7.998 mas, bpa=-1.941 degrees
! Estimated noise=0.868545 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000855172 Jy
! Component: 100  -  total flux cleaned = -0.000859781 Jy
! Component: 150  -  total flux cleaned = -0.000926145 Jy
! Component: 200  -  total flux cleaned = -0.000954609 Jy
! Total flux subtracted in 200 components = -0.000954609 Jy
! Clean residual min=-0.007369 max=0.006226 Jy/beam
! Clean residual mean=-0.000025 rms=0.001594 Jy/beam
! Combined flux in latest and established models = 0.901732 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.901732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177775Jy  sigma=1.785891
! Fit after  self-cal, rms=0.177784Jy  sigma=1.785874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128882 Jy
! Component: 100  -  total flux cleaned = -0.000229825 Jy
! Component: 150  -  total flux cleaned = -0.000249175 Jy
! Component: 200  -  total flux cleaned = -0.000266694 Jy
! Total flux subtracted in 200 components = -0.000266694 Jy
! Clean residual min=-0.007382 max=0.006237 Jy/beam
! Clean residual mean=-0.000025 rms=0.001592 Jy/beam
! Combined flux in latest and established models = 0.901466 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 56 components and 0.901466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177777Jy  sigma=1.785815
! Fit after  self-cal, rms=0.177778Jy  sigma=1.785807
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177778Jy  sigma=1.785807
! Fit after  self-cal, rms=0.177907Jy  sigma=1.785654
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.68 mas, bmaj=16.54 mas, bpa=5.999 degrees
! Estimated noise=1.09944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000465546 Jy
! Component: 100  -  total flux cleaned = -0.000467793 Jy
! Component: 150  -  total flux cleaned = -0.000429649 Jy
! Component: 200  -  total flux cleaned = -0.00039706 Jy
! Total flux subtracted in 200 components = -0.00039706 Jy
! Clean residual min=-0.007907 max=0.007152 Jy/beam
! Clean residual mean=-0.000052 rms=0.002278 Jy/beam
! Combined flux in latest and established models = 0.901068 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 59 components and 0.901068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177899Jy  sigma=1.785562
! Fit after  self-cal, rms=0.177899Jy  sigma=1.785543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.29656e-05 Jy
! Component: 100  -  total flux cleaned = -2.41112e-06 Jy
! Component: 150  -  total flux cleaned = 2.03921e-05 Jy
! Component: 200  -  total flux cleaned = 2.02931e-05 Jy
! Total flux subtracted in 200 components = 2.02931e-05 Jy
! Clean residual min=-0.007917 max=0.007134 Jy/beam
! Clean residual mean=-0.000052 rms=0.002272 Jy/beam
! Combined flux in latest and established models = 0.901089 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 59 components and 0.901089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177906Jy  sigma=1.785635
! Fit after  self-cal, rms=0.177907Jy  sigma=1.785623
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=7.997 mas, bpa=-1.885 degrees
! Estimated noise=0.869199 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.922 x 7.997 at -1.885 degrees (North through East)
! Clean map  min=-0.0070333  max=0.84294 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177907Jy  sigma=1.785623
! Fit after  self-cal, rms=0.164274Jy  sigma=1.609185
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=7.993 mas, bpa=-1.821 degrees
! Estimated noise=0.869598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143603 Jy
! Component: 100  -  total flux cleaned = 6.91858e-05 Jy
! Component: 150  -  total flux cleaned = -2.92481e-05 Jy
! Component: 200  -  total flux cleaned = -0.000120181 Jy
! Total flux subtracted in 200 components = -0.000120181 Jy
! Clean residual min=-0.006963 max=0.006006 Jy/beam
! Clean residual mean=-0.000020 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.900969 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.900968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164253Jy  sigma=1.609072
! Fit after  self-cal, rms=0.164259Jy  sigma=1.609057
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142067 Jy
! Component: 100  -  total flux cleaned = -0.000225353 Jy
! Component: 150  -  total flux cleaned = -0.000276051 Jy
! Component: 200  -  total flux cleaned = -0.000350721 Jy
! Total flux subtracted in 200 components = -0.000350721 Jy
! Clean residual min=-0.006979 max=0.005963 Jy/beam
! Clean residual mean=-0.000021 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.900618 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 65 components and 0.900618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164248Jy  sigma=1.608984
! Fit after  self-cal, rms=0.164251Jy  sigma=1.608976
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164251Jy  sigma=1.608976
! Fit after  self-cal, rms=0.164326Jy  sigma=1.608939
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.593 mas, bmaj=7.143 mas, bpa=-1.533 degrees
! Estimated noise=1.40873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.653961 Jy
! Component: 100  -  total flux cleaned = 0.800724 Jy
! Component: 150  -  total flux cleaned = 0.855522 Jy
! Component: 200  -  total flux cleaned = 0.882397 Jy
! Total flux subtracted in 200 components = 0.882397 Jy
! Clean residual min=-0.010097 max=0.012409 Jy/beam
! Clean residual mean=-0.000052 rms=0.002449 Jy/beam
! Combined flux in latest and established models = 0.882397 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.882397 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=7.992 mas, bpa=-1.798 degrees
! Estimated noise=0.870058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014096 Jy
! Component: 100  -  total flux cleaned = 0.0174843 Jy
! Component: 150  -  total flux cleaned = 0.0183787 Jy
! Component: 200  -  total flux cleaned = 0.0189287 Jy
! Total flux subtracted in 200 components = 0.0189287 Jy
! Clean residual min=-0.007206 max=0.006528 Jy/beam
! Clean residual mean=-0.000020 rms=0.001592 Jy/beam
! Combined flux in latest and established models = 0.901325 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.901325 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.681 mas, bmaj=16.55 mas, bpa=6.054 degrees
! Estimated noise=1.09972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.02108e-05 Jy
! Component: 100  -  total flux cleaned = 3.26671e-05 Jy
! Component: 150  -  total flux cleaned = 7.28181e-05 Jy
! Component: 200  -  total flux cleaned = 0.000134778 Jy
! Total flux subtracted in 200 components = 0.000134778 Jy
! Clean residual min=-0.007104 max=0.007511 Jy/beam
! Clean residual mean=-0.000042 rms=0.002145 Jy/beam
! Combined flux in latest and established models = 0.90146 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.75804e-05 Jy
! Component: 100  -  total flux cleaned = 5.16172e-05 Jy
! Component: 150  -  total flux cleaned = 5.36566e-05 Jy
! Component: 200  -  total flux cleaned = 5.33863e-05 Jy
! Total flux subtracted in 200 components = 5.33863e-05 Jy
! Clean residual min=-0.007004 max=0.007515 Jy/beam
! Clean residual mean=-0.000041 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.901514 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 37 components and 0.901514 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=7.992 mas, bpa=-1.798 degrees
! Estimated noise=0.870058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220284 Jy
! Component: 100  -  total flux cleaned = 0.0002117 Jy
! Component: 150  -  total flux cleaned = 0.000213536 Jy
! Component: 200  -  total flux cleaned = 0.000277946 Jy
! Total flux subtracted in 200 components = 0.000277946 Jy
! Clean residual min=-0.006789 max=0.006368 Jy/beam
! Clean residual mean=-0.000019 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 0.901792 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.901792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164444Jy  sigma=1.610300
! Fit after  self-cal, rms=0.164441Jy  sigma=1.610266
wmodel J2129-1538_S_map.mod
! Writing 47 model components to file: J2129-1538_S_map.mod
wobs   J2129-1538_S_uvs.fits
! Writing UV FITS file: J2129-1538_S_uvs.fits
wwins  J2129-1538_S_map.win
! wwins: Wrote 1 windows to J2129-1538_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00173848 Jy
! Component: 100  -  total flux cleaned = -0.00291747 Jy
! Component: 150  -  total flux cleaned = -0.00311727 Jy
! Component: 200  -  total flux cleaned = -0.00320947 Jy
! Component: 250  -  total flux cleaned = -0.00329776 Jy
! Component: 300  -  total flux cleaned = -0.00347114 Jy
! Component: 350  -  total flux cleaned = -0.00380823 Jy
! Component: 400  -  total flux cleaned = -0.00405353 Jy
! Component: 450  -  total flux cleaned = -0.00436886 Jy
! Component: 500  -  total flux cleaned = -0.00460113 Jy
! Component: 550  -  total flux cleaned = -0.00527339 Jy
! Component: 600  -  total flux cleaned = -0.00578196 Jy
! Component: 650  -  total flux cleaned = -0.00635162 Jy
! Component: 700  -  total flux cleaned = -0.00683897 Jy
! Component: 750  -  total flux cleaned = -0.00718014 Jy
! Component: 800  -  total flux cleaned = -0.00765167 Jy
! Component: 850  -  total flux cleaned = -0.0083096 Jy
! Component: 900  -  total flux cleaned = -0.00856838 Jy
! Component: 950  -  total flux cleaned = -0.00907587 Jy
! Component: 1000  -  total flux cleaned = -0.00957352 Jy
! Component: 1050  -  total flux cleaned = -0.0100016 Jy
! Component: 1100  -  total flux cleaned = -0.0104827 Jy
! Component: 1150  -  total flux cleaned = -0.0107785 Jy
! Component: 1200  -  total flux cleaned = -0.0109532 Jy
! Component: 1250  -  total flux cleaned = -0.0111259 Jy
! Component: 1300  -  total flux cleaned = -0.0112404 Jy
! Component: 1350  -  total flux cleaned = -0.0114638 Jy
! Component: 1400  -  total flux cleaned = -0.0115735 Jy
! Component: 1450  -  total flux cleaned = -0.0114105 Jy
! Component: 1500  -  total flux cleaned = -0.0115723 Jy
! Component: 1550  -  total flux cleaned = -0.0113594 Jy
! Component: 1600  -  total flux cleaned = -0.0114118 Jy
! Component: 1650  -  total flux cleaned = -0.0111004 Jy
! Component: 1700  -  total flux cleaned = -0.0112545 Jy
! Component: 1750  -  total flux cleaned = -0.0110021 Jy
! Component: 1800  -  total flux cleaned = -0.0112021 Jy
! Component: 1850  -  total flux cleaned = -0.0111524 Jy
! Component: 1900  -  total flux cleaned = -0.011104 Jy
! Component: 1950  -  total flux cleaned = -0.0109584 Jy
! Component: 2000  -  total flux cleaned = -0.0109582 Jy
! Component: 2050  -  total flux cleaned = -0.0108637 Jy
! Component: 2100  -  total flux cleaned = -0.01077 Jy
! Component: 2150  -  total flux cleaned = -0.0106769 Jy
! Component: 2200  -  total flux cleaned = -0.0106762 Jy
! Component: 2250  -  total flux cleaned = -0.0104497 Jy
! Component: 2300  -  total flux cleaned = -0.0104941 Jy
! Component: 2350  -  total flux cleaned = -0.0104939 Jy
! Component: 2400  -  total flux cleaned = -0.0104939 Jy
! Component: 2450  -  total flux cleaned = -0.0104064 Jy
! Component: 2500  -  total flux cleaned = -0.0104923 Jy
! Component: 2550  -  total flux cleaned = -0.0104071 Jy
! Component: 2600  -  total flux cleaned = -0.0104069 Jy
! Component: 2650  -  total flux cleaned = -0.0103239 Jy
! Component: 2700  -  total flux cleaned = -0.0104072 Jy
! Component: 2750  -  total flux cleaned = -0.010366 Jy
! Component: 2800  -  total flux cleaned = -0.0103662 Jy
! Component: 2850  -  total flux cleaned = -0.0103263 Jy
! Component: 2900  -  total flux cleaned = -0.0102868 Jy
! Component: 2950  -  total flux cleaned = -0.0103255 Jy
! Component: 3000  -  total flux cleaned = -0.0102468 Jy
! Component: 3050  -  total flux cleaned = -0.010169 Jy
! Component: 3100  -  total flux cleaned = -0.0100919 Jy
! Component: 3150  -  total flux cleaned = -0.00997718 Jy
! Component: 3200  -  total flux cleaned = -0.00993939 Jy
! Component: 3250  -  total flux cleaned = -0.00986503 Jy
! Component: 3300  -  total flux cleaned = -0.00986507 Jy
! Component: 3350  -  total flux cleaned = -0.00990245 Jy
! Component: 3400  -  total flux cleaned = -0.00982918 Jy
! Component: 3450  -  total flux cleaned = -0.00982897 Jy
! Component: 3500  -  total flux cleaned = -0.00975655 Jy
! Component: 3550  -  total flux cleaned = -0.00979233 Jy
! Component: 3600  -  total flux cleaned = -0.00993501 Jy
! Component: 3650  -  total flux cleaned = -0.00989928 Jy
! Component: 3700  -  total flux cleaned = -0.00982906 Jy
! Component: 3750  -  total flux cleaned = -0.00993362 Jy
! Component: 3800  -  total flux cleaned = -0.00996828 Jy
! Component: 3850  -  total flux cleaned = -0.0101057 Jy
! Component: 3900  -  total flux cleaned = -0.00993498 Jy
! Component: 3950  -  total flux cleaned = -0.0100368 Jy
! Component: 4000  -  total flux cleaned = -0.0100369 Jy
! Component: 4050  -  total flux cleaned = -0.00997011 Jy
! Total flux subtracted in 4096 components = -0.0099703 Jy
! Clean residual min=-0.003039 max=0.001875 Jy/beam
! Clean residual mean=-0.000006 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.891821 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 345 components and 0.891821 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J2129-1538_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.922 x 7.992 at -1.798 degrees (North through East)
! Clean map  min=-0.0035103  max=0.84525 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J2129-1538_S_map.fits
wmodel /scr/pima/rdv76_uvs/J2129-1538_S_map.mod
! Writing 345 model components to file: /scr/pima/rdv76_uvs/J2129-1538_S_map.mod
wobs   /scr/pima/rdv76_uvs/J2129-1538_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J2129-1538_S_uvs.fits
wwins  /scr/pima/rdv76_uvs/J2129-1538_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rdv76_uvs/J2129-1538_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.845249 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000605202 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.214802 0.214802 0.429603 0.859206 1.71841 3.43682 6.87365 13.7473 27.4946 54.9892
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.845 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1396.64 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J2129-1538_S_dfm.log closed on Fri Jun 15 05:58:03 2018