! Started logfile: /scr/pima/rdv76_uvs/J2115+2933_X_dfm.log on Fri Jun 15 03:57:25 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rdv76_uvs/J2115+2933_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv76_uvs/J2115+2933_X_uva.fits ! AN table 1: 154 integrations on 55 of 55 possible baselines. ! AN table 2: 43 integrations on 45 of 45 possible baselines. ! AN table 3: 33 integrations on 10 of 10 possible baselines. ! AN table 4: 35 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.246779 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2115+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 10804 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2115+2933_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1292 telescope corrections were flagged in sub-array 1. ! A total of 242 telescope corrections were flagged in sub-array 2. ! A total of 105 telescope corrections were flagged in sub-array 3. ! A total of 111 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1292 telescope corrections were flagged in sub-array 1. ! A total of 242 telescope corrections were flagged in sub-array 2. ! A total of 105 telescope corrections were flagged in sub-array 3. ! A total of 111 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1292 telescope corrections were flagged in sub-array 1. ! A total of 242 telescope corrections were flagged in sub-array 2. ! A total of 105 telescope corrections were flagged in sub-array 3. ! A total of 111 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1292 telescope corrections were flagged in sub-array 1. ! A total of 242 telescope corrections were flagged in sub-array 2. ! A total of 105 telescope corrections were flagged in sub-array 3. ! A total of 111 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.177418Jy sigma=13.690589 ! Fit after self-cal, rms=0.460798Jy sigma=5.054930 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5157 mas, bmaj=1.105 mas, bpa=-3.018 degrees ! Estimated noise=1.03989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.440656 Jy ! Component: 100 - total flux cleaned = 0.566231 Jy ! Total flux subtracted in 100 components = 0.566231 Jy ! Clean residual min=-0.018649 max=0.059088 Jy/beam ! Clean residual mean=-0.000039 rms=0.004578 Jy/beam ! Combined flux in latest and established models = 0.566231 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.566231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237543Jy sigma=2.659564 ! Fit after self-cal, rms=0.236902Jy sigma=2.652383 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726413 Jy ! Component: 100 - total flux cleaned = 0.118355 Jy ! Total flux subtracted in 100 components = 0.118355 Jy ! Clean residual min=-0.011320 max=0.027741 Jy/beam ! Clean residual mean=-0.000025 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.684587 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.684586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201357Jy sigma=2.147796 ! Fit after self-cal, rms=0.200778Jy sigma=2.141115 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Added new window around map position (-0.6, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345926 Jy ! Component: 100 - total flux cleaned = 0.057598 Jy ! Total flux subtracted in 100 components = 0.057598 Jy ! Clean residual min=-0.009829 max=0.014945 Jy/beam ! Clean residual mean=-0.000019 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.742185 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.742185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190986Jy sigma=1.994653 ! Fit after self-cal, rms=0.190765Jy sigma=1.991918 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179389 Jy ! Component: 100 - total flux cleaned = 0.030269 Jy ! Total flux subtracted in 100 components = 0.030269 Jy ! Clean residual min=-0.009202 max=0.009469 Jy/beam ! Clean residual mean=-0.000015 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 0.772453 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.772453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187824Jy sigma=1.946443 ! Fit after self-cal, rms=0.187751Jy sigma=1.945420 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.629 mas, bmaj=1.246 mas, bpa=-4.451 degrees ! Estimated noise=0.772206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183003 Jy ! Component: 100 - total flux cleaned = 0.0286992 Jy ! Component: 150 - total flux cleaned = 0.0348859 Jy ! Component: 200 - total flux cleaned = 0.0385994 Jy ! Total flux subtracted in 200 components = 0.0385994 Jy ! Clean residual min=-0.008578 max=0.009112 Jy/beam ! Clean residual mean=-0.000125 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 0.811053 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.811053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186193Jy sigma=1.919715 ! Fit after self-cal, rms=0.186089Jy sigma=1.918231 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.629 x 1.246 at -4.451 degrees (North through East) ! Clean map min=-0.0076035 max=0.59833 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 0.99 LA 0.98 ! NL 0.98 NY 1.00 OV 1.01 PT 1.02 ! SC 0.99 WZ 1.00 ZC 1.00 ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 KK 1.01 KP 0.98 ! LA 0.95 MK 1.01 NL 1.00 OV 1.01 ! PT 0.98 SC 0.99 ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 KK 0.92 MK 1.02 NY 1.03 ! OV 0.96 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.97 MK 0.97 NY 1.12 ZC 0.92 ! ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 KP 1.01 LA 0.97 ! NL 0.98 NY 1.02 OV 1.03 PT 1.01 ! SC 0.96 WZ 1.05 ZC 1.00 ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 KK 0.97 KP 0.99 ! LA 0.95 MK 0.98 NL 1.01 OV 1.01 ! PT 0.98 SC 0.96 ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 KK 1.10 MK 0.88 NY 1.02 ! OV 1.07 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.84 MK 1.03 NY 1.23 ZC 0.90 ! ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 KP 0.99 LA 0.97 ! NL 1.01 NY 1.05 OV 1.03 PT 1.02 ! SC 0.97 WZ 1.04 ZC 0.98 ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 KK 1.02 KP 1.00 ! LA 0.96 MK 1.01 NL 1.00 OV 0.98 ! PT 0.97 SC 1.01 ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 KK 0.87 MK 1.11 NY 1.04 ! OV 1.08 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.99 MK 0.97 NY 0.99 ZC 0.92 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 KP 1.04 LA 0.97 ! NL 1.01 NY 1.00 OV 1.04 PT 1.00 ! SC 0.98 WZ 1.04 ZC 0.97 ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 KK 1.00 KP 0.99 ! LA 0.95 MK 1.00 NL 1.01 OV 1.02 ! PT 0.97 SC 1.00 ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 KK 0.95 MK 1.00 NY 1.01 ! OV 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 1.07 MK 1.08 NY 1.11 ZC 0.78 ! ! ! Fit before self-cal, rms=0.186089Jy sigma=1.918231 ! Fit after self-cal, rms=0.180196Jy sigma=1.880406 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6201 mas, bmaj=1.293 mas, bpa=-4.825 degrees ! Estimated noise=0.801156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000936227 Jy ! Component: 100 - total flux cleaned = -0.00117086 Jy ! Component: 150 - total flux cleaned = -0.00117878 Jy ! Component: 200 - total flux cleaned = -0.00111753 Jy ! Total flux subtracted in 200 components = -0.00111753 Jy ! Clean residual min=-0.006955 max=0.006706 Jy/beam ! Clean residual mean=-0.000147 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.809935 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.809935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180038Jy sigma=1.878718 ! Fit after self-cal, rms=0.180031Jy sigma=1.878283 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180031Jy sigma=1.878283 ! Fit after self-cal, rms=0.179434Jy sigma=1.870640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6209 mas, bmaj=1.292 mas, bpa=-4.872 degrees ! Estimated noise=0.799705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014922 Jy ! Component: 100 - total flux cleaned = -0.00148716 Jy ! Component: 150 - total flux cleaned = -0.00147823 Jy ! Component: 200 - total flux cleaned = -0.00142545 Jy ! Total flux subtracted in 200 components = -0.00142545 Jy ! Clean residual min=-0.006858 max=0.006482 Jy/beam ! Clean residual mean=-0.000129 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.80851 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.80851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179352Jy sigma=1.869875 ! Fit after self-cal, rms=0.179359Jy sigma=1.869670 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231471 Jy ! Component: 100 - total flux cleaned = 0.000230921 Jy ! Component: 150 - total flux cleaned = 0.000183591 Jy ! Component: 200 - total flux cleaned = 0.000183632 Jy ! Total flux subtracted in 200 components = 0.000183632 Jy ! Clean residual min=-0.006871 max=0.006486 Jy/beam ! Clean residual mean=-0.000129 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.808693 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.808693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179319Jy sigma=1.869409 ! Fit after self-cal, rms=0.179315Jy sigma=1.869339 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179315Jy sigma=1.869339 ! Fit after self-cal, rms=0.178811Jy sigma=1.854985 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6217 mas, bmaj=1.292 mas, bpa=-4.948 degrees ! Estimated noise=0.79993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000288323 Jy ! Component: 100 - total flux cleaned = -0.000235553 Jy ! Component: 150 - total flux cleaned = -0.000277857 Jy ! Component: 200 - total flux cleaned = -0.00027673 Jy ! Total flux subtracted in 200 components = -0.00027673 Jy ! Clean residual min=-0.006476 max=0.006627 Jy/beam ! Clean residual mean=-0.000033 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.808416 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.808416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178767Jy sigma=1.854660 ! Fit after self-cal, rms=0.178781Jy sigma=1.854507 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00594179 Jy ! Component: 100 - total flux cleaned = 0.0072931 Jy ! Component: 150 - total flux cleaned = 0.00820129 Jy ! Component: 200 - total flux cleaned = 0.00901923 Jy ! Total flux subtracted in 200 components = 0.00901923 Jy ! Clean residual min=-0.006238 max=0.006321 Jy/beam ! Clean residual mean=-0.000029 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.817436 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.817436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178544Jy sigma=1.850905 ! Fit after self-cal, rms=0.178512Jy sigma=1.850630 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Added new window around map position (48.2, 28.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463195 Jy ! Component: 100 - total flux cleaned = 0.00557121 Jy ! Component: 150 - total flux cleaned = 0.00596409 Jy ! Component: 200 - total flux cleaned = 0.00613562 Jy ! Total flux subtracted in 200 components = 0.00613562 Jy ! Clean residual min=-0.005976 max=0.006189 Jy/beam ! Clean residual mean=-0.000021 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.823571 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.823571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178321Jy sigma=1.848560 ! Fit after self-cal, rms=0.178318Jy sigma=1.848422 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Added new window around map position (45.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578355 Jy ! Component: 100 - total flux cleaned = 0.00767094 Jy ! Component: 150 - total flux cleaned = 0.0080611 Jy ! Component: 200 - total flux cleaned = 0.00833189 Jy ! Total flux subtracted in 200 components = 0.00833189 Jy ! Clean residual min=-0.005826 max=0.005945 Jy/beam ! Clean residual mean=-0.000027 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.831903 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.831903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178102Jy sigma=1.846013 ! Fit after self-cal, rms=0.178089Jy sigma=1.845814 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Added new window around map position (-20.6, 17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356991 Jy ! Component: 100 - total flux cleaned = 0.0042073 Jy ! Component: 150 - total flux cleaned = 0.00540227 Jy ! Component: 200 - total flux cleaned = 0.00618338 Jy ! Total flux subtracted in 200 components = 0.00618338 Jy ! Clean residual min=-0.005820 max=0.005255 Jy/beam ! Clean residual mean=-0.000030 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.838087 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.838087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177916Jy sigma=1.843471 ! Fit after self-cal, rms=0.177905Jy sigma=1.843330 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177905Jy sigma=1.843330 ! Fit after self-cal, rms=0.177557Jy sigma=1.842720 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=2.668 mas, bmaj=2.935 mas, bpa=-53.03 degrees ! Estimated noise=1.13129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253551 Jy ! Component: 100 - total flux cleaned = 0.00366946 Jy ! Component: 150 - total flux cleaned = 0.0042048 Jy ! Component: 200 - total flux cleaned = 0.00455104 Jy ! Total flux subtracted in 200 components = 0.00455104 Jy ! Clean residual min=-0.006046 max=0.005598 Jy/beam ! Clean residual mean=-0.000036 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.842638 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.842638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177543Jy sigma=1.842611 ! Fit after self-cal, rms=0.177535Jy sigma=1.842567 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371785 Jy ! Component: 100 - total flux cleaned = 0.000697826 Jy ! Component: 150 - total flux cleaned = 0.00105608 Jy ! Component: 200 - total flux cleaned = 0.00133092 Jy ! Total flux subtracted in 200 components = 0.00133092 Jy ! Clean residual min=-0.005947 max=0.005503 Jy/beam ! Clean residual mean=-0.000036 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.843969 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.843969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177529Jy sigma=1.842474 ! Fit after self-cal, rms=0.177528Jy sigma=1.842448 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6218 mas, bmaj=1.29 mas, bpa=-4.975 degrees ! Estimated noise=0.799167 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6218 x 1.29 at -4.975 degrees (North through East) ! Clean map min=-0.0053277 max=0.59652 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177528Jy sigma=1.842448 ! Fit after self-cal, rms=0.188959Jy sigma=1.644122 ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6221 mas, bmaj=1.289 mas, bpa=-4.97 degrees ! Estimated noise=0.798782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247337 Jy ! Component: 100 - total flux cleaned = -0.000447819 Jy ! Component: 150 - total flux cleaned = -0.000353543 Jy ! Component: 200 - total flux cleaned = -0.000353766 Jy ! Total flux subtracted in 200 components = -0.000353766 Jy ! Clean residual min=-0.005488 max=0.005364 Jy/beam ! Clean residual mean=-0.000029 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.843615 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.843615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188863Jy sigma=1.642958 ! Fit after self-cal, rms=0.188870Jy sigma=1.642925 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.71318e-05 Jy ! Component: 100 - total flux cleaned = -2.72282e-06 Jy ! Component: 150 - total flux cleaned = -7.78083e-05 Jy ! Component: 200 - total flux cleaned = -7.72006e-05 Jy ! Total flux subtracted in 200 components = -7.72006e-05 Jy ! Clean residual min=-0.005507 max=0.005308 Jy/beam ! Clean residual mean=-0.000030 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.843538 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 127 components and 0.843538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188809Jy sigma=1.642275 ! Fit after self-cal, rms=0.188807Jy sigma=1.642261 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188807Jy sigma=1.642261 ! Fit after self-cal, rms=0.223800Jy sigma=1.642024 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5153 mas, bmaj=1.111 mas, bpa=-3.407 degrees ! Estimated noise=1.08547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442264 Jy ! Component: 100 - total flux cleaned = 0.577971 Jy ! Component: 150 - total flux cleaned = 0.651821 Jy ! Component: 200 - total flux cleaned = 0.697878 Jy ! Total flux subtracted in 200 components = 0.697878 Jy ! Clean residual min=-0.010005 max=0.024259 Jy/beam ! Clean residual mean=-0.000017 rms=0.002559 Jy/beam ! Combined flux in latest and established models = 0.697878 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.697878 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6222 mas, bmaj=1.289 mas, bpa=-4.966 degrees ! Estimated noise=0.79875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476669 Jy ! Component: 100 - total flux cleaned = 0.0738125 Jy ! Component: 150 - total flux cleaned = 0.0892335 Jy ! Component: 200 - total flux cleaned = 0.0997572 Jy ! Total flux subtracted in 200 components = 0.0997572 Jy ! Clean residual min=-0.006884 max=0.008019 Jy/beam ! Clean residual mean=-0.000039 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.797635 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 0.797636 Jy ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Added new window around map position (0.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917101 Jy ! Component: 100 - total flux cleaned = 0.0164794 Jy ! Component: 150 - total flux cleaned = 0.0227048 Jy ! Component: 200 - total flux cleaned = 0.0270333 Jy ! Total flux subtracted in 200 components = 0.0270333 Jy ! Clean residual min=-0.006373 max=0.005503 Jy/beam ! Clean residual mean=-0.000030 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.824669 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 63 components and 0.824669 Jy ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=2.665 mas, bmaj=2.934 mas, bpa=-53.41 degrees ! Estimated noise=1.13087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659286 Jy ! Component: 100 - total flux cleaned = 0.0103741 Jy ! Component: 150 - total flux cleaned = 0.0124816 Jy ! Component: 200 - total flux cleaned = 0.013895 Jy ! Total flux subtracted in 200 components = 0.013895 Jy ! Clean residual min=-0.006447 max=0.005561 Jy/beam ! Clean residual mean=-0.000069 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.838564 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132064 Jy ! Component: 100 - total flux cleaned = 0.00247265 Jy ! Component: 150 - total flux cleaned = 0.00315902 Jy ! Component: 200 - total flux cleaned = 0.00365671 Jy ! Total flux subtracted in 200 components = 0.00365671 Jy ! Clean residual min=-0.006320 max=0.005437 Jy/beam ! Clean residual mean=-0.000065 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.842221 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 99 components and 0.842221 Jy ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6222 mas, bmaj=1.289 mas, bpa=-4.966 degrees ! Estimated noise=0.79875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151318 Jy ! Component: 100 - total flux cleaned = 0.00077037 Jy ! Component: 150 - total flux cleaned = 0.000771555 Jy ! Component: 200 - total flux cleaned = 0.000774367 Jy ! Total flux subtracted in 200 components = 0.000774367 Jy ! Clean residual min=-0.005566 max=0.005363 Jy/beam ! Clean residual mean=-0.000025 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.842995 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.842995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224197Jy sigma=1.646337 ! Fit after self-cal, rms=0.224175Jy sigma=1.645571 wmodel J2115+2933_X_map.mod ! Writing 108 model components to file: J2115+2933_X_map.mod wobs J2115+2933_X_uvs.fits ! Writing UV FITS file: J2115+2933_X_uvs.fits wwins J2115+2933_X_map.win ! wwins: Wrote 7 windows to J2115+2933_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115741 Jy ! Component: 100 - total flux cleaned = -0.00163704 Jy ! Component: 150 - total flux cleaned = -0.00181885 Jy ! Component: 200 - total flux cleaned = -0.00199756 Jy ! Component: 250 - total flux cleaned = -0.00234581 Jy ! Component: 300 - total flux cleaned = -0.00200435 Jy ! Component: 350 - total flux cleaned = -0.0022578 Jy ! Component: 400 - total flux cleaned = -0.00225632 Jy ! Component: 450 - total flux cleaned = -0.00241821 Jy ! Component: 500 - total flux cleaned = -0.00257746 Jy ! Component: 550 - total flux cleaned = -0.00289504 Jy ! Component: 600 - total flux cleaned = -0.00305165 Jy ! Component: 650 - total flux cleaned = -0.0033632 Jy ! Component: 700 - total flux cleaned = -0.00367087 Jy ! Component: 750 - total flux cleaned = -0.00397471 Jy ! Component: 800 - total flux cleaned = -0.00435173 Jy ! Component: 850 - total flux cleaned = -0.00427711 Jy ! Component: 900 - total flux cleaned = -0.00479556 Jy ! Component: 950 - total flux cleaned = -0.00494235 Jy ! Component: 1000 - total flux cleaned = -0.0053781 Jy ! Component: 1050 - total flux cleaned = -0.00559363 Jy ! Component: 1100 - total flux cleaned = -0.00573711 Jy ! Component: 1150 - total flux cleaned = -0.00602072 Jy ! Component: 1200 - total flux cleaned = -0.00616144 Jy ! Component: 1250 - total flux cleaned = -0.00616131 Jy ! Component: 1300 - total flux cleaned = -0.00657701 Jy ! Component: 1350 - total flux cleaned = -0.00671519 Jy ! Component: 1400 - total flux cleaned = -0.00705808 Jy ! Component: 1450 - total flux cleaned = -0.00698985 Jy ! Component: 1500 - total flux cleaned = -0.00725957 Jy ! Component: 1550 - total flux cleaned = -0.00746108 Jy ! Component: 1600 - total flux cleaned = -0.00759474 Jy ! Component: 1650 - total flux cleaned = -0.00772732 Jy ! Component: 1700 - total flux cleaned = -0.00785874 Jy ! Component: 1750 - total flux cleaned = -0.00798973 Jy ! Component: 1800 - total flux cleaned = -0.00779446 Jy ! Component: 1850 - total flux cleaned = -0.00824728 Jy ! Component: 1900 - total flux cleaned = -0.00831163 Jy ! Component: 1950 - total flux cleaned = -0.00837562 Jy ! Component: 2000 - total flux cleaned = -0.00843909 Jy ! Component: 2050 - total flux cleaned = -0.00862859 Jy ! Component: 2100 - total flux cleaned = -0.00862836 Jy ! Component: 2150 - total flux cleaned = -0.00869077 Jy ! Component: 2200 - total flux cleaned = -0.00881472 Jy ! Component: 2250 - total flux cleaned = -0.00881462 Jy ! Component: 2300 - total flux cleaned = -0.00899931 Jy ! Component: 2350 - total flux cleaned = -0.00918256 Jy ! Component: 2400 - total flux cleaned = -0.0089396 Jy ! Component: 2450 - total flux cleaned = -0.00906033 Jy ! Component: 2500 - total flux cleaned = -0.00887978 Jy ! Component: 2550 - total flux cleaned = -0.00917902 Jy ! Component: 2600 - total flux cleaned = -0.00923886 Jy ! Component: 2650 - total flux cleaned = -0.00912046 Jy ! Component: 2700 - total flux cleaned = -0.00912046 Jy ! Component: 2750 - total flux cleaned = -0.00923805 Jy ! Component: 2800 - total flux cleaned = -0.00906319 Jy ! Component: 2850 - total flux cleaned = -0.00906343 Jy ! Component: 2900 - total flux cleaned = -0.00900526 Jy ! Component: 2950 - total flux cleaned = -0.00900535 Jy ! Component: 3000 - total flux cleaned = -0.00894806 Jy ! Component: 3050 - total flux cleaned = -0.00889073 Jy ! Component: 3100 - total flux cleaned = -0.00883407 Jy ! Component: 3150 - total flux cleaned = -0.00866403 Jy ! Component: 3200 - total flux cleaned = -0.00849551 Jy ! Component: 3250 - total flux cleaned = -0.00827191 Jy ! Component: 3300 - total flux cleaned = -0.00832746 Jy ! Component: 3350 - total flux cleaned = -0.00871565 Jy ! Component: 3400 - total flux cleaned = -0.00827416 Jy ! Component: 3450 - total flux cleaned = -0.00843932 Jy ! Component: 3500 - total flux cleaned = -0.00860345 Jy ! Component: 3550 - total flux cleaned = -0.00849481 Jy ! Component: 3600 - total flux cleaned = -0.00860328 Jy ! Component: 3650 - total flux cleaned = -0.00817145 Jy ! Component: 3700 - total flux cleaned = -0.00844026 Jy ! Component: 3750 - total flux cleaned = -0.00838675 Jy ! Component: 3800 - total flux cleaned = -0.00844004 Jy ! Component: 3850 - total flux cleaned = -0.00865224 Jy ! Component: 3900 - total flux cleaned = -0.00838813 Jy ! Component: 3950 - total flux cleaned = -0.00875677 Jy ! Component: 4000 - total flux cleaned = -0.00859913 Jy ! Component: 4050 - total flux cleaned = -0.008704 Jy ! Total flux subtracted in 4096 components = -0.0089639 Jy ! Clean residual min=-0.002743 max=0.003024 Jy/beam ! Clean residual mean=-0.000011 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.834031 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 448 components and 0.834031 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rdv76_uvs/J2115+2933_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6222 x 1.289 at -4.966 degrees (North through East) ! Clean map min=-0.0039625 max=0.59701 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J2115+2933_X_map.fits wmodel /scr/pima/rdv76_uvs/J2115+2933_X_map.mod ! Writing 448 model components to file: /scr/pima/rdv76_uvs/J2115+2933_X_map.mod wobs /scr/pima/rdv76_uvs/J2115+2933_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv76_uvs/J2115+2933_X_uvs.fits wwins /scr/pima/rdv76_uvs/J2115+2933_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rdv76_uvs/J2115+2933_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.597013 invert ! Inverting map ! Your choice of large map pixels excluded 5.56% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000859533 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.431917 0.431917 0.863834 1.72767 3.45534 6.91067 13.8213 27.6427 55.2854 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.597 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 694.577 quit ! Quitting program ! Log file /scr/pima/rdv76_uvs/J2115+2933_X_dfm.log closed on Fri Jun 15 03:57:30 2018