! Started logfile: /scr/pima/rdv76_uvs/J1605-1139_S_dfm.log on Fri Jun 15 05:55:41 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rdv76_uvs/J1605-1139_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv76_uvs/J1605-1139_S_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! AN table 2: 40 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.732159 visibilities/baseline/integration-bin. ! Found source: J1605-1139 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 13296 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1605-1139_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 278 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 278 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 278 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 278 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.043423Jy sigma=12.172037 ! Fit after self-cal, rms=0.743386Jy sigma=8.721713 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.841 mas, bpa=5.79 degrees ! Estimated noise=0.821841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.212665 Jy ! Component: 100 - total flux cleaned = 0.259393 Jy ! Total flux subtracted in 100 components = 0.259393 Jy ! Clean residual min=-0.009521 max=0.016004 Jy/beam ! Clean residual mean=-0.000045 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 0.259393 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.259393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175545Jy sigma=1.975231 ! Fit after self-cal, rms=0.175533Jy sigma=1.974987 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.982 mas, bmaj=9.277 mas, bpa=4.018 degrees ! Estimated noise=0.564297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213157 Jy ! Component: 100 - total flux cleaned = 0.0328614 Jy ! Component: 150 - total flux cleaned = 0.0397201 Jy ! Component: 200 - total flux cleaned = 0.0421636 Jy ! Total flux subtracted in 200 components = 0.0421636 Jy ! Clean residual min=-0.007445 max=0.008581 Jy/beam ! Clean residual mean=-0.000037 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.301556 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.301556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172989Jy sigma=1.943686 ! Fit after self-cal, rms=0.172859Jy sigma=1.942167 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.982 x 9.277 at 4.018 degrees (North through East) ! Clean map min=-0.0070013 max=0.27351 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 KP 1.02 LA 1.02 ! MK 1.03 NL 1.03 OV 0.99 PT 1.00 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.89 KP 1.00 LA 1.02 ! MK 0.98 NL 1.00 OV 0.97 PT 1.03 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.86 KP 1.02 LA 1.04 ! MK 0.99 NL 0.98 OV 1.01 PT 1.00 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.89 KP 0.99 LA 1.01 ! MK 1.03 NL 1.02 OV 0.98 PT 0.99 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! ! Fit before self-cal, rms=0.172859Jy sigma=1.942167 ! Fit after self-cal, rms=0.171109Jy sigma=1.929111 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.979 mas, bmaj=9.354 mas, bpa=4.08 degrees ! Estimated noise=0.561281 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300027 Jy ! Component: 100 - total flux cleaned = 0.00326759 Jy ! Component: 150 - total flux cleaned = 0.00313393 Jy ! Component: 200 - total flux cleaned = 0.00301848 Jy ! Total flux subtracted in 200 components = 0.00301848 Jy ! Clean residual min=-0.005153 max=0.004260 Jy/beam ! Clean residual mean=0.000012 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.304575 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.304575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171025Jy sigma=1.928142 ! Fit after self-cal, rms=0.171102Jy sigma=1.927648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171102Jy sigma=1.927648 ! Fit after self-cal, rms=0.171251Jy sigma=1.924820 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=9.35 mas, bpa=4.039 degrees ! Estimated noise=0.562059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164058 Jy ! Component: 100 - total flux cleaned = 0.00175885 Jy ! Component: 150 - total flux cleaned = 0.00180664 Jy ! Component: 200 - total flux cleaned = 0.00180457 Jy ! Total flux subtracted in 200 components = 0.00180457 Jy ! Clean residual min=-0.005147 max=0.004118 Jy/beam ! Clean residual mean=0.000013 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.306379 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.306379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171218Jy sigma=1.924417 ! Fit after self-cal, rms=0.171219Jy sigma=1.924335 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414557 Jy ! Component: 100 - total flux cleaned = 0.000540737 Jy ! Component: 150 - total flux cleaned = 0.000541485 Jy ! Component: 200 - total flux cleaned = 0.000542216 Jy ! Total flux subtracted in 200 components = 0.000542216 Jy ! Clean residual min=-0.005079 max=0.004082 Jy/beam ! Clean residual mean=0.000013 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.306922 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.306922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171201Jy sigma=1.924144 ! Fit after self-cal, rms=0.171195Jy sigma=1.924121 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171195Jy sigma=1.924121 ! Fit after self-cal, rms=0.171262Jy sigma=1.922767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=9.34 mas, bpa=3.938 degrees ! Estimated noise=0.561632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.65115e-05 Jy ! Component: 100 - total flux cleaned = 0.00011246 Jy ! Component: 150 - total flux cleaned = 0.0001122 Jy ! Component: 200 - total flux cleaned = 0.000111828 Jy ! Total flux subtracted in 200 components = 0.000111828 Jy ! Clean residual min=-0.004694 max=0.004144 Jy/beam ! Clean residual mean=0.000011 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.307033 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 0.307033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171248Jy sigma=1.922592 ! Fit after self-cal, rms=0.171258Jy sigma=1.922545 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117563 Jy ! Component: 100 - total flux cleaned = 0.000268103 Jy ! Component: 150 - total flux cleaned = 0.00029469 Jy ! Component: 200 - total flux cleaned = 0.000343742 Jy ! Total flux subtracted in 200 components = 0.000343742 Jy ! Clean residual min=-0.004674 max=0.004114 Jy/beam ! Clean residual mean=0.000011 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.307377 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.307377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171250Jy sigma=1.922436 ! Fit after self-cal, rms=0.171246Jy sigma=1.922425 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171246Jy sigma=1.922425 ! Fit after self-cal, rms=0.171230Jy sigma=1.922407 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.412 mas, bmaj=15.03 mas, bpa=-4.515 degrees ! Estimated noise=0.642871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273154 Jy ! Component: 100 - total flux cleaned = 0.000358146 Jy ! Component: 150 - total flux cleaned = 0.000402784 Jy ! Component: 200 - total flux cleaned = 0.000444018 Jy ! Total flux subtracted in 200 components = 0.000444018 Jy ! Clean residual min=-0.005509 max=0.004439 Jy/beam ! Clean residual mean=0.000016 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.307821 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.307821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171225Jy sigma=1.922347 ! Fit after self-cal, rms=0.171225Jy sigma=1.922329 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016712 Jy ! Component: 100 - total flux cleaned = 0.000349381 Jy ! Component: 150 - total flux cleaned = 0.000407746 Jy ! Component: 200 - total flux cleaned = 0.000460655 Jy ! Total flux subtracted in 200 components = 0.000460655 Jy ! Clean residual min=-0.005479 max=0.004377 Jy/beam ! Clean residual mean=0.000016 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.308282 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.308282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171223Jy sigma=1.922306 ! Fit after self-cal, rms=0.171222Jy sigma=1.922298 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.972 mas, bmaj=9.335 mas, bpa=3.866 degrees ! Estimated noise=0.561249 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.972 x 9.335 at 3.866 degrees (North through East) ! Clean map min=-0.0045362 max=0.27093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.873 mas, bpa=5.574 degrees ! Estimated noise=0.819787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211437 Jy ! Component: 100 - total flux cleaned = 0.258428 Jy ! Component: 150 - total flux cleaned = 0.275123 Jy ! Component: 200 - total flux cleaned = 0.285174 Jy ! Total flux subtracted in 200 components = 0.285174 Jy ! Clean residual min=-0.007649 max=0.006700 Jy/beam ! Clean residual mean=0.000001 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.285174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.285174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.972 mas, bmaj=9.335 mas, bpa=3.866 degrees ! Estimated noise=0.561249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00995632 Jy ! Component: 100 - total flux cleaned = 0.0156801 Jy ! Component: 150 - total flux cleaned = 0.018636 Jy ! Component: 200 - total flux cleaned = 0.0198037 Jy ! Total flux subtracted in 200 components = 0.0198037 Jy ! Clean residual min=-0.004817 max=0.003872 Jy/beam ! Clean residual mean=0.000009 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.304978 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 52 components and 0.304978 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.412 mas, bmaj=15.03 mas, bpa=-4.515 degrees ! Estimated noise=0.642871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229761 Jy ! Component: 100 - total flux cleaned = 0.00304153 Jy ! Component: 150 - total flux cleaned = 0.00334131 Jy ! Component: 200 - total flux cleaned = 0.00358304 Jy ! Total flux subtracted in 200 components = 0.00358304 Jy ! Clean residual min=-0.005528 max=0.004174 Jy/beam ! Clean residual mean=0.000016 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.308561 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143071 Jy ! Component: 100 - total flux cleaned = 0.000194459 Jy ! Component: 150 - total flux cleaned = 0.000242375 Jy ! Component: 200 - total flux cleaned = 0.000264869 Jy ! Total flux subtracted in 200 components = 0.000264869 Jy ! Clean residual min=-0.005508 max=0.004205 Jy/beam ! Clean residual mean=0.000016 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.308826 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.308826 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.972 mas, bmaj=9.335 mas, bpa=3.866 degrees ! Estimated noise=0.561249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406839 Jy ! Component: 100 - total flux cleaned = -0.000455269 Jy ! Component: 150 - total flux cleaned = -0.000454263 Jy ! Component: 200 - total flux cleaned = -0.000494654 Jy ! Total flux subtracted in 200 components = -0.000494654 Jy ! Clean residual min=-0.004665 max=0.003986 Jy/beam ! Clean residual mean=0.000009 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.308331 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.308331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171251Jy sigma=1.922632 ! Fit after self-cal, rms=0.171244Jy sigma=1.922577 wmodel J1605-1139_S_map.mod ! Writing 86 model components to file: J1605-1139_S_map.mod wobs J1605-1139_S_uvs.fits ! Writing UV FITS file: J1605-1139_S_uvs.fits wwins J1605-1139_S_map.win ! wwins: Wrote 2 windows to J1605-1139_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130563 Jy ! Component: 100 - total flux cleaned = -0.00193038 Jy ! Component: 150 - total flux cleaned = -0.00278397 Jy ! Component: 200 - total flux cleaned = -0.00359287 Jy ! Component: 250 - total flux cleaned = -0.00436672 Jy ! Component: 300 - total flux cleaned = -0.00493788 Jy ! Component: 350 - total flux cleaned = -0.00526991 Jy ! Component: 400 - total flux cleaned = -0.00569742 Jy ! Component: 450 - total flux cleaned = -0.00606041 Jy ! Component: 500 - total flux cleaned = -0.00631422 Jy ! Component: 550 - total flux cleaned = -0.00646211 Jy ! Component: 600 - total flux cleaned = -0.00665377 Jy ! Component: 650 - total flux cleaned = -0.00670048 Jy ! Component: 700 - total flux cleaned = -0.00692945 Jy ! Component: 750 - total flux cleaned = -0.00688347 Jy ! Component: 800 - total flux cleaned = -0.00701758 Jy ! Component: 850 - total flux cleaned = -0.00723681 Jy ! Component: 900 - total flux cleaned = -0.00728058 Jy ! Component: 950 - total flux cleaned = -0.00744995 Jy ! Component: 1000 - total flux cleaned = -0.00757414 Jy ! Component: 1050 - total flux cleaned = -0.00769764 Jy ! Component: 1100 - total flux cleaned = -0.00798102 Jy ! Component: 1150 - total flux cleaned = -0.00794082 Jy ! Component: 1200 - total flux cleaned = -0.00813768 Jy ! Component: 1250 - total flux cleaned = -0.00821563 Jy ! Component: 1300 - total flux cleaned = -0.0081393 Jy ! Component: 1350 - total flux cleaned = -0.00832981 Jy ! Component: 1400 - total flux cleaned = -0.00829227 Jy ! Component: 1450 - total flux cleaned = -0.00832904 Jy ! Component: 1500 - total flux cleaned = -0.00836566 Jy ! Component: 1550 - total flux cleaned = -0.00843765 Jy ! Component: 1600 - total flux cleaned = -0.00832915 Jy ! Component: 1650 - total flux cleaned = -0.00832861 Jy ! Component: 1700 - total flux cleaned = -0.00839876 Jy ! Component: 1750 - total flux cleaned = -0.00832847 Jy ! Component: 1800 - total flux cleaned = -0.00825893 Jy ! Component: 1850 - total flux cleaned = -0.00819066 Jy ! Component: 1900 - total flux cleaned = -0.00819065 Jy ! Component: 1950 - total flux cleaned = -0.0082246 Jy ! Component: 2000 - total flux cleaned = -0.00819084 Jy ! Component: 2050 - total flux cleaned = -0.00812431 Jy ! Component: 2100 - total flux cleaned = -0.00812427 Jy ! Component: 2150 - total flux cleaned = -0.00799362 Jy ! Component: 2200 - total flux cleaned = -0.007929 Jy ! Component: 2250 - total flux cleaned = -0.00792918 Jy ! Component: 2300 - total flux cleaned = -0.00789717 Jy ! Component: 2350 - total flux cleaned = -0.00780287 Jy ! Component: 2400 - total flux cleaned = -0.00777163 Jy ! Component: 2450 - total flux cleaned = -0.00770991 Jy ! Component: 2500 - total flux cleaned = -0.00767923 Jy ! Component: 2550 - total flux cleaned = -0.00780069 Jy ! Component: 2600 - total flux cleaned = -0.00774013 Jy ! Component: 2650 - total flux cleaned = -0.00767998 Jy ! Component: 2700 - total flux cleaned = -0.00759134 Jy ! Component: 2750 - total flux cleaned = -0.00765046 Jy ! Component: 2800 - total flux cleaned = -0.00762129 Jy ! Component: 2850 - total flux cleaned = -0.00773752 Jy ! Component: 2900 - total flux cleaned = -0.0077375 Jy ! Component: 2950 - total flux cleaned = -0.00779477 Jy ! Component: 3000 - total flux cleaned = -0.00787956 Jy ! Component: 3050 - total flux cleaned = -0.0078233 Jy ! Component: 3100 - total flux cleaned = -0.00787908 Jy ! Component: 3150 - total flux cleaned = -0.00785169 Jy ! Component: 3200 - total flux cleaned = -0.00793443 Jy ! Component: 3250 - total flux cleaned = -0.00790741 Jy ! Component: 3300 - total flux cleaned = -0.00785324 Jy ! Component: 3350 - total flux cleaned = -0.00785311 Jy ! Component: 3400 - total flux cleaned = -0.00796053 Jy ! Component: 3450 - total flux cleaned = -0.00788064 Jy ! Component: 3500 - total flux cleaned = -0.00790719 Jy ! Component: 3550 - total flux cleaned = -0.00785451 Jy ! Component: 3600 - total flux cleaned = -0.0078544 Jy ! Component: 3650 - total flux cleaned = -0.00780226 Jy ! Component: 3700 - total flux cleaned = -0.00764761 Jy ! Component: 3750 - total flux cleaned = -0.0076731 Jy ! Component: 3800 - total flux cleaned = -0.00762224 Jy ! Component: 3850 - total flux cleaned = -0.0076726 Jy ! Component: 3900 - total flux cleaned = -0.0076725 Jy ! Component: 3950 - total flux cleaned = -0.00767249 Jy ! Component: 4000 - total flux cleaned = -0.00752385 Jy ! Component: 4050 - total flux cleaned = -0.00754858 Jy ! Total flux subtracted in 4096 components = -0.0075488 Jy ! Clean residual min=-0.001450 max=0.001450 Jy/beam ! Clean residual mean=0.000009 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.300782 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 399 components and 0.300782 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rdv76_uvs/J1605-1139_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.972 x 9.335 at 3.866 degrees (North through East) ! Clean map min=-0.0031775 max=0.26834 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J1605-1139_S_map.fits wmodel /scr/pima/rdv76_uvs/J1605-1139_S_map.mod ! Writing 399 model components to file: /scr/pima/rdv76_uvs/J1605-1139_S_map.mod wobs /scr/pima/rdv76_uvs/J1605-1139_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv76_uvs/J1605-1139_S_uvs.fits wwins /scr/pima/rdv76_uvs/J1605-1139_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv76_uvs/J1605-1139_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.268335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000475374 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.53147 0.53147 1.06294 2.12588 4.25176 8.50352 17.007 34.0141 68.0281 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.268 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 564.472 quit ! Quitting program ! Log file /scr/pima/rdv76_uvs/J1605-1139_S_dfm.log closed on Fri Jun 15 05:55:45 2018