! Started logfile: /scr/pima/rdv76_uvs/J1215-1731_X_dfm.log on Fri Jun 15 03:54:05 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv76_uvs/J1215-1731_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J1215-1731_X_uva.fits
! AN table 1: 12 integrations on 36 of 36 possible baselines.
! AN table 2: 53 integrations on 45 of 45 possible baselines.
! AN table 3: 36 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.396074 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1215-1731
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 4520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1215-1731_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 379 telescope corrections were flagged in sub-array 2.
!  A total of 72 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 379 telescope corrections were flagged in sub-array 2.
!  A total of 72 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 379 telescope corrections were flagged in sub-array 2.
!  A total of 72 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 379 telescope corrections were flagged in sub-array 2.
!  A total of 72 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.774954Jy  sigma=16.829578
! Fit after  self-cal, rms=0.518469Jy  sigma=4.825456
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.742 mas, bmaj=2.058 mas, bpa=-7.543 degrees
! Estimated noise=1.86052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02788 Jy
! Component: 100  -  total flux cleaned = 1.29384 Jy
! Total flux subtracted in 100 components = 1.29384 Jy
! Clean residual min=-0.043091 max=0.140938 Jy/beam
! Clean residual mean=-0.000089 rms=0.012884 Jy/beam
! Combined flux in latest and established models = 1.29384 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.29384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.331753Jy  sigma=3.038301
! Fit after  self-cal, rms=0.331493Jy  sigma=3.036212
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150344 Jy
! Component: 100  -  total flux cleaned = 0.240672 Jy
! Total flux subtracted in 100 components = 0.240672 Jy
! Clean residual min=-0.028009 max=0.047312 Jy/beam
! Clean residual mean=-0.000033 rms=0.006734 Jy/beam
! Combined flux in latest and established models = 1.53451 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 1.53451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225951Jy  sigma=2.026998
! Fit after  self-cal, rms=0.223326Jy  sigma=2.003430
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0607076 Jy
! Component: 100  -  total flux cleaned = 0.0977114 Jy
! Total flux subtracted in 100 components = 0.0977114 Jy
! Clean residual min=-0.020723 max=0.020103 Jy/beam
! Clean residual mean=-0.000012 rms=0.004721 Jy/beam
! Combined flux in latest and established models = 1.63222 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 27 components and 1.63222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199757Jy  sigma=1.775746
! Fit after  self-cal, rms=0.199222Jy  sigma=1.770873
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8536 mas, bmaj=2.343 mas, bpa=-8.515 degrees
! Estimated noise=1.49055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0352314 Jy
! Component: 100  -  total flux cleaned = 0.0542671 Jy
! Component: 150  -  total flux cleaned = 0.0654952 Jy
! Component: 200  -  total flux cleaned = 0.0699368 Jy
! Total flux subtracted in 200 components = 0.0699368 Jy
! Clean residual min=-0.013922 max=0.016081 Jy/beam
! Clean residual mean=0.000004 rms=0.003845 Jy/beam
! Combined flux in latest and established models = 1.70216 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 1.70216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192875Jy  sigma=1.709067
! Fit after  self-cal, rms=0.192567Jy  sigma=1.706487
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8536 x 2.343 at -8.515 degrees (North through East)
! Clean map  min=-0.013193  max=1.363 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.01     NL        1.00     OV        1.04     PT        1.02     
!   SC        0.99     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     KK        0.99     KP        1.00     
!   LA        0.96     MK        0.99     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        0.97     
!   LA        1.01     NL        0.99     OV        1.04     PT        1.02     
!   SC        0.97     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.01     KK        1.01     KP        1.00     
!   LA        0.96     MK        0.99     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.98     KP        0.99     
!   LA        1.02     NL        0.99     OV        1.04     PT        1.02     
!   SC        0.99     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     KK        0.98     KP        1.00     
!   LA        0.99     MK        0.97     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.99     KP        0.99     
!   LA        1.03     NL        1.00     OV        1.04     PT        1.03     
!   SC        0.99     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.01     KK        1.03     KP        1.01     
!   LA        0.95     MK        0.96     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
! 
! Fit before self-cal, rms=0.192567Jy  sigma=1.706487
! Fit after  self-cal, rms=0.189324Jy  sigma=1.675387
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.851 mas, bmaj=2.348 mas, bpa=-8.753 degrees
! Estimated noise=1.49576 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.8, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181447 Jy
! Component: 100  -  total flux cleaned = 0.0291449 Jy
! Component: 150  -  total flux cleaned = 0.0362126 Jy
! Component: 200  -  total flux cleaned = 0.0393347 Jy
! Total flux subtracted in 200 components = 0.0393347 Jy
! Clean residual min=-0.011044 max=0.012674 Jy/beam
! Clean residual mean=0.000016 rms=0.002798 Jy/beam
! Combined flux in latest and established models = 1.74149 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 63 components and 1.74149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187220Jy  sigma=1.656672
! Fit after  self-cal, rms=0.187033Jy  sigma=1.654805
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187033Jy  sigma=1.654805
! Fit after  self-cal, rms=0.186318Jy  sigma=1.647789
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.85 mas, bmaj=2.346 mas, bpa=-8.796 degrees
! Estimated noise=1.49634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00728595 Jy
! Component: 100  -  total flux cleaned = 0.00958248 Jy
! Component: 150  -  total flux cleaned = 0.011379 Jy
! Component: 200  -  total flux cleaned = 0.0125928 Jy
! Total flux subtracted in 200 components = 0.0125928 Jy
! Clean residual min=-0.010301 max=0.012251 Jy/beam
! Clean residual mean=-0.000003 rms=0.002547 Jy/beam
! Combined flux in latest and established models = 1.75409 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 76 components and 1.75409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185822Jy  sigma=1.643082
! Fit after  self-cal, rms=0.185766Jy  sigma=1.642682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-47, -41).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00736817 Jy
! Component: 100  -  total flux cleaned = 0.00635802 Jy
! Component: 150  -  total flux cleaned = 0.00697884 Jy
! Component: 200  -  total flux cleaned = 0.00740045 Jy
! Total flux subtracted in 200 components = 0.00740045 Jy
! Clean residual min=-0.009694 max=0.010426 Jy/beam
! Clean residual mean=-0.000001 rms=0.002461 Jy/beam
! Combined flux in latest and established models = 1.76149 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 94 components and 1.76149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185159Jy  sigma=1.637183
! Fit after  self-cal, rms=0.185105Jy  sigma=1.636847
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185105Jy  sigma=1.636847
! Fit after  self-cal, rms=0.184754Jy  sigma=1.632840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8496 mas, bmaj=2.345 mas, bpa=-8.803 degrees
! Estimated noise=1.4973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298593 Jy
! Component: 100  -  total flux cleaned = 0.00441567 Jy
! Component: 150  -  total flux cleaned = 0.00517422 Jy
! Component: 200  -  total flux cleaned = 0.00540753 Jy
! Total flux subtracted in 200 components = 0.00540753 Jy
! Clean residual min=-0.009578 max=0.009507 Jy/beam
! Clean residual mean=-0.000005 rms=0.002360 Jy/beam
! Combined flux in latest and established models = 1.7669 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 112 components and 1.76689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184555Jy  sigma=1.631238
! Fit after  self-cal, rms=0.184547Jy  sigma=1.631163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000610292 Jy
! Component: 100  -  total flux cleaned = 0.000941228 Jy
! Component: 150  -  total flux cleaned = 0.00114737 Jy
! Component: 200  -  total flux cleaned = 0.00134559 Jy
! Total flux subtracted in 200 components = 0.00134559 Jy
! Clean residual min=-0.009465 max=0.009543 Jy/beam
! Clean residual mean=-0.000004 rms=0.002343 Jy/beam
! Combined flux in latest and established models = 1.76824 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 121 components and 1.76824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184430Jy  sigma=1.630182
! Fit after  self-cal, rms=0.184421Jy  sigma=1.630135
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184421Jy  sigma=1.630135
! Fit after  self-cal, rms=0.184484Jy  sigma=1.630009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=4.461 mas, bpa=-10.78 degrees
! Estimated noise=2.01476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337833 Jy
! Component: 100  -  total flux cleaned = 0.00410283 Jy
! Component: 150  -  total flux cleaned = 0.00433539 Jy
! Component: 200  -  total flux cleaned = 0.00424668 Jy
! Total flux subtracted in 200 components = 0.00424668 Jy
! Clean residual min=-0.009666 max=0.010984 Jy/beam
! Clean residual mean=-0.000011 rms=0.002859 Jy/beam
! Combined flux in latest and established models = 1.77249 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 132 components and 1.77249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184519Jy  sigma=1.629834
! Fit after  self-cal, rms=0.184492Jy  sigma=1.629699
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000628834 Jy
! Component: 100  -  total flux cleaned = 0.00046594 Jy
! Component: 150  -  total flux cleaned = 0.000462114 Jy
! Component: 200  -  total flux cleaned = 0.000393915 Jy
! Total flux subtracted in 200 components = 0.000393915 Jy
! Clean residual min=-0.009425 max=0.010871 Jy/beam
! Clean residual mean=-0.000009 rms=0.002837 Jy/beam
! Combined flux in latest and established models = 1.77288 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 137 components and 1.77288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184539Jy  sigma=1.629826
! Fit after  self-cal, rms=0.184523Jy  sigma=1.629782
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8494 mas, bmaj=2.344 mas, bpa=-8.806 degrees
! Estimated noise=1.49806 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8494 x 2.344 at -8.806 degrees (North through East)
! Clean map  min=-0.0088427  max=1.3598 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184523Jy  sigma=1.629782
! Fit after  self-cal, rms=0.169727Jy  sigma=1.476667
! Inverting map and beam 
! Estimated beam: bmin=0.8488 mas, bmaj=2.344 mas, bpa=-8.796 degrees
! Estimated noise=1.49719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000520391 Jy
! Component: 100  -  total flux cleaned = -8.53289e-05 Jy
! Component: 150  -  total flux cleaned = 0.000106404 Jy
! Component: 200  -  total flux cleaned = 0.000284594 Jy
! Total flux subtracted in 200 components = 0.000284594 Jy
! Clean residual min=-0.008617 max=0.009199 Jy/beam
! Clean residual mean=-0.000005 rms=0.002138 Jy/beam
! Combined flux in latest and established models = 1.77317 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 151 components and 1.77317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169604Jy  sigma=1.475548
! Fit after  self-cal, rms=0.169596Jy  sigma=1.475508
! Inverting map 
! Added new window around map position (-26.4, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573522 Jy
! Component: 100  -  total flux cleaned = 0.004843 Jy
! Component: 150  -  total flux cleaned = 0.00420337 Jy
! Component: 200  -  total flux cleaned = 0.00351595 Jy
! Total flux subtracted in 200 components = 0.00351595 Jy
! Clean residual min=-0.008049 max=0.008470 Jy/beam
! Clean residual mean=-0.000005 rms=0.002079 Jy/beam
! Combined flux in latest and established models = 1.77668 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 165 components and 1.77668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169207Jy  sigma=1.471900
! Fit after  self-cal, rms=0.169175Jy  sigma=1.471732
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169175Jy  sigma=1.471732
! Fit after  self-cal, rms=0.169154Jy  sigma=1.471357
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7396 mas, bmaj=2.066 mas, bpa=-7.863 degrees
! Estimated noise=1.8443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02301 Jy
! Component: 100  -  total flux cleaned = 1.29868 Jy
! Component: 150  -  total flux cleaned = 1.45407 Jy
! Component: 200  -  total flux cleaned = 1.54896 Jy
! Total flux subtracted in 200 components = 1.54896 Jy
! Clean residual min=-0.022835 max=0.048607 Jy/beam
! Clean residual mean=-0.000074 rms=0.005941 Jy/beam
! Combined flux in latest and established models = 1.54896 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.54896 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8485 mas, bmaj=2.343 mas, bpa=-8.799 degrees
! Estimated noise=1.49755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0776724 Jy
! Component: 100  -  total flux cleaned = 0.117681 Jy
! Component: 150  -  total flux cleaned = 0.143186 Jy
! Component: 200  -  total flux cleaned = 0.162694 Jy
! Total flux subtracted in 200 components = 0.162694 Jy
! Clean residual min=-0.011615 max=0.013077 Jy/beam
! Clean residual mean=-0.000016 rms=0.002897 Jy/beam
! Combined flux in latest and established models = 1.71165 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 54 components and 1.71165 Jy
! Inverting map 
! Added new window around map position (-9, 14.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160154 Jy
! Component: 100  -  total flux cleaned = 0.0290424 Jy
! Component: 150  -  total flux cleaned = 0.0397575 Jy
! Component: 200  -  total flux cleaned = 0.0469497 Jy
! Total flux subtracted in 200 components = 0.0469497 Jy
! Clean residual min=-0.009882 max=0.008936 Jy/beam
! Clean residual mean=-0.000003 rms=0.002348 Jy/beam
! Combined flux in latest and established models = 1.7586 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 80 components and 1.7586 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.191 mas, bmaj=4.459 mas, bpa=-10.74 degrees
! Estimated noise=2.01653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011266 Jy
! Component: 100  -  total flux cleaned = 0.0148291 Jy
! Component: 150  -  total flux cleaned = 0.0159085 Jy
! Component: 200  -  total flux cleaned = 0.015886 Jy
! Total flux subtracted in 200 components = 0.015886 Jy
! Clean residual min=-0.008375 max=0.010280 Jy/beam
! Clean residual mean=0.000000 rms=0.002543 Jy/beam
! Combined flux in latest and established models = 1.77449 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036938 Jy
! Component: 100  -  total flux cleaned = -0.00070472 Jy
! Component: 150  -  total flux cleaned = -0.00100994 Jy
! Component: 200  -  total flux cleaned = -0.00129061 Jy
! Total flux subtracted in 200 components = -0.00129061 Jy
! Clean residual min=-0.008112 max=0.010032 Jy/beam
! Clean residual mean=-0.000000 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 1.7732 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 115 components and 1.7732 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8485 mas, bmaj=2.343 mas, bpa=-8.799 degrees
! Estimated noise=1.49755 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513339 Jy
! Component: 100  -  total flux cleaned = 6.99682e-05 Jy
! Component: 150  -  total flux cleaned = -0.000328155 Jy
! Component: 200  -  total flux cleaned = -0.000694731 Jy
! Total flux subtracted in 200 components = -0.000694731 Jy
! Clean residual min=-0.008191 max=0.008241 Jy/beam
! Clean residual mean=-0.000000 rms=0.002054 Jy/beam
! Combined flux in latest and established models = 1.7725 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 134 components and 1.7725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169051Jy  sigma=1.471371
! Fit after  self-cal, rms=0.168985Jy  sigma=1.470577
wmodel J1215-1731_X_map.mod
! Writing 134 model components to file: J1215-1731_X_map.mod
wobs   J1215-1731_X_uvs.fits
! Writing UV FITS file: J1215-1731_X_uvs.fits
wwins  J1215-1731_X_map.win
! wwins: Wrote 6 windows to J1215-1731_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024359 Jy
! Component: 100  -  total flux cleaned = 0.00401846 Jy
! Component: 150  -  total flux cleaned = 0.00526422 Jy
! Component: 200  -  total flux cleaned = 0.00606918 Jy
! Component: 250  -  total flux cleaned = 0.00658917 Jy
! Component: 300  -  total flux cleaned = 0.00722613 Jy
! Component: 350  -  total flux cleaned = 0.00822493 Jy
! Component: 400  -  total flux cleaned = 0.00920591 Jy
! Component: 450  -  total flux cleaned = 0.0102878 Jy
! Component: 500  -  total flux cleaned = 0.0112304 Jy
! Component: 550  -  total flux cleaned = 0.0121538 Jy
! Component: 600  -  total flux cleaned = 0.0122687 Jy
! Component: 650  -  total flux cleaned = 0.0124962 Jy
! Component: 700  -  total flux cleaned = 0.0131558 Jy
! Component: 750  -  total flux cleaned = 0.0135894 Jy
! Component: 800  -  total flux cleaned = 0.0136974 Jy
! Component: 850  -  total flux cleaned = 0.0141188 Jy
! Component: 900  -  total flux cleaned = 0.0141188 Jy
! Component: 950  -  total flux cleaned = 0.0145278 Jy
! Component: 1000  -  total flux cleaned = 0.0145262 Jy
! Component: 1050  -  total flux cleaned = 0.0143259 Jy
! Component: 1100  -  total flux cleaned = 0.014623 Jy
! Component: 1150  -  total flux cleaned = 0.0145244 Jy
! Component: 1200  -  total flux cleaned = 0.0144291 Jy
! Component: 1250  -  total flux cleaned = 0.0150013 Jy
! Component: 1300  -  total flux cleaned = 0.0148105 Jy
! Component: 1350  -  total flux cleaned = 0.0148112 Jy
! Component: 1400  -  total flux cleaned = 0.0146261 Jy
! Component: 1450  -  total flux cleaned = 0.0148118 Jy
! Component: 1500  -  total flux cleaned = 0.0149924 Jy
! Component: 1550  -  total flux cleaned = 0.0148139 Jy
! Component: 1600  -  total flux cleaned = 0.0150815 Jy
! Component: 1650  -  total flux cleaned = 0.0156074 Jy
! Component: 1700  -  total flux cleaned = 0.0156064 Jy
! Component: 1750  -  total flux cleaned = 0.0159488 Jy
! Component: 1800  -  total flux cleaned = 0.0159482 Jy
! Component: 1850  -  total flux cleaned = 0.0162019 Jy
! Component: 1900  -  total flux cleaned = 0.0165364 Jy
! Component: 1950  -  total flux cleaned = 0.0165363 Jy
! Component: 2000  -  total flux cleaned = 0.0167 Jy
! Component: 2050  -  total flux cleaned = 0.0168627 Jy
! Component: 2100  -  total flux cleaned = 0.0169441 Jy
! Component: 2150  -  total flux cleaned = 0.0170232 Jy
! Component: 2200  -  total flux cleaned = 0.0174991 Jy
! Component: 2250  -  total flux cleaned = 0.0175769 Jy
! Component: 2300  -  total flux cleaned = 0.0178106 Jy
! Component: 2350  -  total flux cleaned = 0.0178876 Jy
! Component: 2400  -  total flux cleaned = 0.0185 Jy
! Component: 2450  -  total flux cleaned = 0.0185751 Jy
! Component: 2500  -  total flux cleaned = 0.0191019 Jy
! Component: 2550  -  total flux cleaned = 0.0197746 Jy
! Component: 2600  -  total flux cleaned = 0.0197739 Jy
! Component: 2650  -  total flux cleaned = 0.0200673 Jy
! Component: 2700  -  total flux cleaned = 0.0205788 Jy
! Component: 2750  -  total flux cleaned = 0.0210131 Jy
! Component: 2800  -  total flux cleaned = 0.0213723 Jy
! Component: 2850  -  total flux cleaned = 0.0215853 Jy
! Component: 2900  -  total flux cleaned = 0.0219396 Jy
! Component: 2950  -  total flux cleaned = 0.0224319 Jy
! Component: 3000  -  total flux cleaned = 0.0229212 Jy
! Component: 3050  -  total flux cleaned = 0.0231294 Jy
! Component: 3100  -  total flux cleaned = 0.0236117 Jy
! Component: 3150  -  total flux cleaned = 0.0242271 Jy
! Component: 3200  -  total flux cleaned = 0.0243624 Jy
! Component: 3250  -  total flux cleaned = 0.0246996 Jy
! Component: 3300  -  total flux cleaned = 0.024767 Jy
! Component: 3350  -  total flux cleaned = 0.0251013 Jy
! Component: 3400  -  total flux cleaned = 0.025499 Jy
! Component: 3450  -  total flux cleaned = 0.0260252 Jy
! Component: 3500  -  total flux cleaned = 0.0264167 Jy
! Component: 3550  -  total flux cleaned = 0.0264819 Jy
! Component: 3600  -  total flux cleaned = 0.0265471 Jy
! Component: 3650  -  total flux cleaned = 0.0266748 Jy
! Component: 3700  -  total flux cleaned = 0.0272471 Jy
! Component: 3750  -  total flux cleaned = 0.0271837 Jy
! Component: 3800  -  total flux cleaned = 0.0275596 Jy
! Component: 3850  -  total flux cleaned = 0.0275594 Jy
! Component: 3900  -  total flux cleaned = 0.0274977 Jy
! Component: 3950  -  total flux cleaned = 0.0278679 Jy
! Component: 4000  -  total flux cleaned = 0.0280513 Jy
! Component: 4050  -  total flux cleaned = 0.0281727 Jy
! Total flux subtracted in 4096 components = 0.0284153 Jy
! Clean residual min=-0.003760 max=0.003935 Jy/beam
! Clean residual mean=-0.000011 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 1.80092 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 444 components and 1.80092 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J1215-1731_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8485 x 2.343 at -8.799 degrees (North through East)
! Clean map  min=-0.0061537  max=1.3624 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J1215-1731_X_map.fits
wmodel /scr/pima/rdv76_uvs/J1215-1731_X_map.mod
! Writing 444 model components to file: /scr/pima/rdv76_uvs/J1215-1731_X_map.mod
wobs   /scr/pima/rdv76_uvs/J1215-1731_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J1215-1731_X_uvs.fits
wwins  /scr/pima/rdv76_uvs/J1215-1731_X_map.win
! wwins: Wrote 7 windows to /scr/pima/rdv76_uvs/J1215-1731_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.36236 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00104951 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.231108 0.231108 0.462216 0.924431 1.84886 3.69773 7.39545 14.7909 29.5818 59.1636
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0031 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.362 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1298.09 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J1215-1731_X_dfm.log closed on Fri Jun 15 03:54:09 2018