! Started logfile: /scr/pima/rdv76_uvs/J0927-2034_S_dfm.log on Fri Jun 15 05:53:31 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv76_uvs/J0927-2034_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J0927-2034_S_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! AN table 2: 14 integrations on 36 of 36 possible baselines.
! AN table 3: 41 integrations on 1 of 1 possible baselines.
! AN table 4: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.619377 visibilities/baseline/integration-bin.
! Found source: J0927-2034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 10024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0927-2034_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 308 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  A total of 82 telescope corrections were flagged in sub-array 3.
!  A total of 69 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 308 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  A total of 82 telescope corrections were flagged in sub-array 3.
!  A total of 69 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 308 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  A total of 82 telescope corrections were flagged in sub-array 3.
!  A total of 69 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 308 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  A total of 82 telescope corrections were flagged in sub-array 3.
!  A total of 69 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.226956Jy  sigma=11.251539
! Fit after  self-cal, rms=0.392328Jy  sigma=3.428732
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=9.26 mas, bpa=-7.644 degrees
! Estimated noise=1.32132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.532053 Jy
! Component: 100  -  total flux cleaned = 0.651469 Jy
! Total flux subtracted in 100 components = 0.651469 Jy
! Clean residual min=-0.016188 max=0.040640 Jy/beam
! Clean residual mean=-0.000055 rms=0.004061 Jy/beam
! Combined flux in latest and established models = 0.651469 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.651469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.236842Jy  sigma=2.035532
! Fit after  self-cal, rms=0.236861Jy  sigma=2.035366
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0405699 Jy
! Component: 100  -  total flux cleaned = 0.0606124 Jy
! Total flux subtracted in 100 components = 0.0606124 Jy
! Clean residual min=-0.015763 max=0.022282 Jy/beam
! Clean residual mean=-0.000041 rms=0.003392 Jy/beam
! Combined flux in latest and established models = 0.712081 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 0.712081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.229144Jy  sigma=1.956708
! Fit after  self-cal, rms=0.229143Jy  sigma=1.956201
! Inverting map 
! Added new window around map position (3, 19).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196619 Jy
! Component: 100  -  total flux cleaned = 0.0285261 Jy
! Total flux subtracted in 100 components = 0.0285261 Jy
! Clean residual min=-0.014396 max=0.017435 Jy/beam
! Clean residual mean=-0.000044 rms=0.003177 Jy/beam
! Combined flux in latest and established models = 0.740608 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.740607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227807Jy  sigma=1.941553
! Fit after  self-cal, rms=0.227510Jy  sigma=1.938803
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.338 mas, bmaj=11.52 mas, bpa=-7.551 degrees
! Estimated noise=0.97494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103914 Jy
! Component: 100  -  total flux cleaned = 0.0132735 Jy
! Component: 150  -  total flux cleaned = 0.0149149 Jy
! Component: 200  -  total flux cleaned = 0.0153939 Jy
! Total flux subtracted in 200 components = 0.0153939 Jy
! Clean residual min=-0.014196 max=0.011462 Jy/beam
! Clean residual mean=-0.000223 rms=0.003232 Jy/beam
! Combined flux in latest and established models = 0.756001 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.756001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226851Jy  sigma=1.934401
! Fit after  self-cal, rms=0.226829Jy  sigma=1.934108
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.338 x 11.52 at -7.551 degrees (North through East)
! Clean map  min=-0.013613  max=0.67838 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.90     HN        0.89     KP        1.01     
!   LA        1.03     MK        1.01     NL        1.02     OV        1.03     
!   PT        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.90     KK        0.97     KP        1.08     
!   LA        1.02     MK        1.04     NL        1.00     OV        0.98     
!   PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.92     KP        1.04     LA        1.04     NL        1.13     
!   PT        1.07     SC        0.95     WZ        1.08     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.89     HN        0.92     KP        1.02     
!   LA        1.02     MK        0.97     NL        1.02     OV        1.02     
!   PT        1.02     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.89     KK        1.05     KP        1.03     
!   LA        0.97     MK        0.98     NL        1.04     OV        0.97     
!   PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.90     KP        1.03     LA        1.04     NL        1.11     
!   PT        1.08     SC        0.94     WZ        1.10     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.91     HN        0.90     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.00     OV        1.00     
!   PT        1.03     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.90     KK        1.04     KP        1.05     
!   LA        1.00     MK        1.01     NL        1.04     OV        0.99     
!   PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.89     KP        1.03     LA        1.02     NL        1.11     
!   PT        0.99     SC        0.98     WZ        1.06     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        0.87     HN        0.89     KP        1.00     
!   LA        1.00     MK        0.97     NL        0.98     OV        1.04     
!   PT        1.03     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.89     KK        1.10     KP        1.03     
!   LA        0.99     MK        0.96     NL        1.02     OV        1.02     
!   PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   WZ        0.00*    ZC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.91     KP        1.03     LA        1.01     NL        1.14     
!   PT        1.09     SC        0.98     WZ        1.04     
! 
! 
! Fit before self-cal, rms=0.226829Jy  sigma=1.934108
! Fit after  self-cal, rms=0.224300Jy  sigma=1.866709
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=11.52 mas, bpa=-7.584 degrees
! Estimated noise=0.980788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00415752 Jy
! Component: 100  -  total flux cleaned = -0.00561795 Jy
! Component: 150  -  total flux cleaned = -0.00615592 Jy
! Component: 200  -  total flux cleaned = -0.00674896 Jy
! Total flux subtracted in 200 components = -0.00674896 Jy
! Clean residual min=-0.008994 max=0.006838 Jy/beam
! Clean residual mean=-0.000006 rms=0.001681 Jy/beam
! Combined flux in latest and established models = 0.749252 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.749252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224079Jy  sigma=1.864673
! Fit after  self-cal, rms=0.224247Jy  sigma=1.864043
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224247Jy  sigma=1.864043
! Fit after  self-cal, rms=0.223642Jy  sigma=1.856801
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.371 mas, bmaj=11.51 mas, bpa=-7.549 degrees
! Estimated noise=0.979736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00299164 Jy
! Component: 100  -  total flux cleaned = -0.00362499 Jy
! Component: 150  -  total flux cleaned = -0.00415673 Jy
! Component: 200  -  total flux cleaned = -0.00452493 Jy
! Total flux subtracted in 200 components = -0.00452493 Jy
! Clean residual min=-0.008448 max=0.005780 Jy/beam
! Clean residual mean=-0.000013 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 0.744727 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.744727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223504Jy  sigma=1.855603
! Fit after  self-cal, rms=0.223509Jy  sigma=1.855493
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000755834 Jy
! Component: 100  -  total flux cleaned = -0.00116165 Jy
! Component: 150  -  total flux cleaned = -0.0014467 Jy
! Component: 200  -  total flux cleaned = -0.00164165 Jy
! Total flux subtracted in 200 components = -0.00164165 Jy
! Clean residual min=-0.008178 max=0.005703 Jy/beam
! Clean residual mean=-0.000015 rms=0.001596 Jy/beam
! Combined flux in latest and established models = 0.743086 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 0.743086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223447Jy  sigma=1.855053
! Fit after  self-cal, rms=0.223445Jy  sigma=1.855019
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223445Jy  sigma=1.855019
! Fit after  self-cal, rms=0.223447Jy  sigma=1.846737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.377 mas, bmaj=11.52 mas, bpa=-7.526 degrees
! Estimated noise=0.980228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00211261 Jy
! Component: 100  -  total flux cleaned = -0.0024989 Jy
! Component: 150  -  total flux cleaned = -0.00283636 Jy
! Component: 200  -  total flux cleaned = -0.00299109 Jy
! Total flux subtracted in 200 components = -0.00299109 Jy
! Clean residual min=-0.007376 max=0.005605 Jy/beam
! Clean residual mean=0.000017 rms=0.001537 Jy/beam
! Combined flux in latest and established models = 0.740095 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.740095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223357Jy  sigma=1.846106
! Fit after  self-cal, rms=0.223384Jy  sigma=1.846033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000427239 Jy
! Component: 100  -  total flux cleaned = -0.000556742 Jy
! Component: 150  -  total flux cleaned = -0.000675131 Jy
! Component: 200  -  total flux cleaned = -0.000731549 Jy
! Total flux subtracted in 200 components = -0.000731549 Jy
! Clean residual min=-0.007235 max=0.005577 Jy/beam
! Clean residual mean=0.000016 rms=0.001531 Jy/beam
! Combined flux in latest and established models = 0.739363 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.739363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223341Jy  sigma=1.845773
! Fit after  self-cal, rms=0.223341Jy  sigma=1.845763
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223341Jy  sigma=1.845763
! Fit after  self-cal, rms=0.223777Jy  sigma=1.845582
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.748 mas, bmaj=17.41 mas, bpa=-7.48 degrees
! Estimated noise=1.13615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100043 Jy
! Component: 100  -  total flux cleaned = -0.00132483 Jy
! Component: 150  -  total flux cleaned = -0.00149686 Jy
! Component: 200  -  total flux cleaned = -0.00160655 Jy
! Total flux subtracted in 200 components = -0.00160655 Jy
! Clean residual min=-0.004912 max=0.004765 Jy/beam
! Clean residual mean=0.000046 rms=0.001582 Jy/beam
! Combined flux in latest and established models = 0.737757 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.737757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223767Jy  sigma=1.845420
! Fit after  self-cal, rms=0.223773Jy  sigma=1.845377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000296939 Jy
! Component: 100  -  total flux cleaned = -0.000478901 Jy
! Component: 150  -  total flux cleaned = -0.000568407 Jy
! Component: 200  -  total flux cleaned = -0.000567213 Jy
! Total flux subtracted in 200 components = -0.000567213 Jy
! Clean residual min=-0.004880 max=0.004808 Jy/beam
! Clean residual mean=0.000045 rms=0.001579 Jy/beam
! Combined flux in latest and established models = 0.737189 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 99 components and 0.737189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223765Jy  sigma=1.845330
! Fit after  self-cal, rms=0.223761Jy  sigma=1.845313
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=11.52 mas, bpa=-7.508 degrees
! Estimated noise=0.980572 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.382 x 11.52 at -7.508 degrees (North through East)
! Clean map  min=-0.0064094  max=0.68223 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223761Jy  sigma=1.845313
! Fit after  self-cal, rms=0.219806Jy  sigma=1.674032
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=11.52 mas, bpa=-7.508 degrees
! Estimated noise=0.981016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144163 Jy
! Component: 100  -  total flux cleaned = -0.0016765 Jy
! Component: 150  -  total flux cleaned = -0.0018848 Jy
! Component: 200  -  total flux cleaned = -0.00182531 Jy
! Total flux subtracted in 200 components = -0.00182531 Jy
! Clean residual min=-0.006769 max=0.005601 Jy/beam
! Clean residual mean=0.000016 rms=0.001502 Jy/beam
! Combined flux in latest and established models = 0.735364 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 100 components and 0.735364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219732Jy  sigma=1.673685
! Fit after  self-cal, rms=0.219740Jy  sigma=1.673674
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014612 Jy
! Component: 100  -  total flux cleaned = -3.90261e-05 Jy
! Component: 150  -  total flux cleaned = 6.2727e-05 Jy
! Component: 200  -  total flux cleaned = 0.000157905 Jy
! Total flux subtracted in 200 components = 0.000157905 Jy
! Clean residual min=-0.006817 max=0.005603 Jy/beam
! Clean residual mean=0.000017 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.735522 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.735522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219702Jy  sigma=1.673533
! Fit after  self-cal, rms=0.219705Jy  sigma=1.673528
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219705Jy  sigma=1.673528
! Fit after  self-cal, rms=0.225933Jy  sigma=1.673411
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.798 mas, bmaj=9.247 mas, bpa=-7.563 degrees
! Estimated noise=1.32657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.532328 Jy
! Component: 100  -  total flux cleaned = 0.65065 Jy
! Component: 150  -  total flux cleaned = 0.687583 Jy
! Component: 200  -  total flux cleaned = 0.705694 Jy
! Total flux subtracted in 200 components = 0.705694 Jy
! Clean residual min=-0.008934 max=0.009802 Jy/beam
! Clean residual mean=-0.000019 rms=0.002228 Jy/beam
! Combined flux in latest and established models = 0.705694 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.705694 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.39 mas, bmaj=11.52 mas, bpa=-7.494 degrees
! Estimated noise=0.981342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150471 Jy
! Component: 100  -  total flux cleaned = 0.0224696 Jy
! Component: 150  -  total flux cleaned = 0.0258325 Jy
! Component: 200  -  total flux cleaned = 0.0267985 Jy
! Total flux subtracted in 200 components = 0.0267985 Jy
! Clean residual min=-0.006865 max=0.005604 Jy/beam
! Clean residual mean=0.000017 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.732493 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 64 components and 0.732493 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.751 mas, bmaj=17.44 mas, bpa=-7.429 degrees
! Estimated noise=1.13618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846502 Jy
! Component: 100  -  total flux cleaned = 0.00102113 Jy
! Component: 150  -  total flux cleaned = 0.00116041 Jy
! Component: 200  -  total flux cleaned = 0.00135779 Jy
! Total flux subtracted in 200 components = 0.00135779 Jy
! Clean residual min=-0.004940 max=0.005118 Jy/beam
! Clean residual mean=0.000039 rms=0.001558 Jy/beam
! Combined flux in latest and established models = 0.73385 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169246 Jy
! Component: 100  -  total flux cleaned = 0.000318079 Jy
! Component: 150  -  total flux cleaned = 0.000449346 Jy
! Component: 200  -  total flux cleaned = 0.000567811 Jy
! Total flux subtracted in 200 components = 0.000567811 Jy
! Clean residual min=-0.004866 max=0.005111 Jy/beam
! Clean residual mean=0.000040 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 0.734418 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 99 components and 0.734418 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.39 mas, bmaj=11.52 mas, bpa=-7.494 degrees
! Estimated noise=0.981342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483612 Jy
! Component: 100  -  total flux cleaned = 0.000613938 Jy
! Component: 150  -  total flux cleaned = 0.000673252 Jy
! Component: 200  -  total flux cleaned = 0.000731954 Jy
! Total flux subtracted in 200 components = 0.000731954 Jy
! Clean residual min=-0.006735 max=0.005437 Jy/beam
! Clean residual mean=0.000022 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.73515 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 113 components and 0.73515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225946Jy  sigma=1.673827
! Fit after  self-cal, rms=0.225925Jy  sigma=1.673677
wmodel J0927-2034_S_map.mod
! Writing 113 model components to file: J0927-2034_S_map.mod
wobs   J0927-2034_S_uvs.fits
! Writing UV FITS file: J0927-2034_S_uvs.fits
wwins  J0927-2034_S_map.win
! wwins: Wrote 2 windows to J0927-2034_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00255116 Jy
! Component: 100  -  total flux cleaned = -0.00254867 Jy
! Component: 150  -  total flux cleaned = -0.00313133 Jy
! Component: 200  -  total flux cleaned = -0.00369014 Jy
! Component: 250  -  total flux cleaned = -0.00423485 Jy
! Component: 300  -  total flux cleaned = -0.00458942 Jy
! Component: 350  -  total flux cleaned = -0.00484905 Jy
! Component: 400  -  total flux cleaned = -0.00510396 Jy
! Component: 450  -  total flux cleaned = -0.00543907 Jy
! Component: 500  -  total flux cleaned = -0.0054392 Jy
! Component: 550  -  total flux cleaned = -0.00552012 Jy
! Component: 600  -  total flux cleaned = -0.00551957 Jy
! Component: 650  -  total flux cleaned = -0.00544079 Jy
! Component: 700  -  total flux cleaned = -0.00551792 Jy
! Component: 750  -  total flux cleaned = -0.00521099 Jy
! Component: 800  -  total flux cleaned = -0.00528835 Jy
! Component: 850  -  total flux cleaned = -0.00536291 Jy
! Component: 900  -  total flux cleaned = -0.00513964 Jy
! Component: 950  -  total flux cleaned = -0.00477098 Jy
! Component: 1000  -  total flux cleaned = -0.0046249 Jy
! Component: 1050  -  total flux cleaned = -0.00412192 Jy
! Component: 1100  -  total flux cleaned = -0.00419356 Jy
! Component: 1150  -  total flux cleaned = -0.00405163 Jy
! Component: 1200  -  total flux cleaned = -0.00377336 Jy
! Component: 1250  -  total flux cleaned = -0.00384325 Jy
! Component: 1300  -  total flux cleaned = -0.00398078 Jy
! Component: 1350  -  total flux cleaned = -0.00377677 Jy
! Component: 1400  -  total flux cleaned = -0.00370962 Jy
! Component: 1450  -  total flux cleaned = -0.00350876 Jy
! Component: 1500  -  total flux cleaned = -0.00344326 Jy
! Component: 1550  -  total flux cleaned = -0.00331162 Jy
! Component: 1600  -  total flux cleaned = -0.00318147 Jy
! Component: 1650  -  total flux cleaned = -0.00311659 Jy
! Component: 1700  -  total flux cleaned = -0.00285988 Jy
! Component: 1750  -  total flux cleaned = -0.0029227 Jy
! Component: 1800  -  total flux cleaned = -0.00285954 Jy
! Component: 1850  -  total flux cleaned = -0.00260835 Jy
! Component: 1900  -  total flux cleaned = -0.00267082 Jy
! Component: 1950  -  total flux cleaned = -0.00242272 Jy
! Component: 2000  -  total flux cleaned = -0.00260779 Jy
! Component: 2050  -  total flux cleaned = -0.00260749 Jy
! Component: 2100  -  total flux cleaned = -0.00248642 Jy
! Component: 2150  -  total flux cleaned = -0.00266721 Jy
! Component: 2200  -  total flux cleaned = -0.00254669 Jy
! Component: 2250  -  total flux cleaned = -0.0024863 Jy
! Component: 2300  -  total flux cleaned = -0.00224961 Jy
! Component: 2350  -  total flux cleaned = -0.00225017 Jy
! Component: 2400  -  total flux cleaned = -0.00225057 Jy
! Component: 2450  -  total flux cleaned = -0.00219265 Jy
! Component: 2500  -  total flux cleaned = -0.00213445 Jy
! Component: 2550  -  total flux cleaned = -0.00213494 Jy
! Component: 2600  -  total flux cleaned = -0.00219249 Jy
! Component: 2650  -  total flux cleaned = -0.00219157 Jy
! Component: 2700  -  total flux cleaned = -0.00207805 Jy
! Component: 2750  -  total flux cleaned = -0.00219065 Jy
! Component: 2800  -  total flux cleaned = -0.00219052 Jy
! Component: 2850  -  total flux cleaned = -0.00213447 Jy
! Component: 2900  -  total flux cleaned = -0.0023 Jy
! Component: 2950  -  total flux cleaned = -0.00251985 Jy
! Component: 3000  -  total flux cleaned = -0.00230032 Jy
! Component: 3050  -  total flux cleaned = -0.00235523 Jy
! Component: 3100  -  total flux cleaned = -0.0024644 Jy
! Component: 3150  -  total flux cleaned = -0.00246438 Jy
! Component: 3200  -  total flux cleaned = -0.00246421 Jy
! Component: 3250  -  total flux cleaned = -0.00241084 Jy
! Component: 3300  -  total flux cleaned = -0.00267683 Jy
! Component: 3350  -  total flux cleaned = -0.00267657 Jy
! Component: 3400  -  total flux cleaned = -0.00257129 Jy
! Component: 3450  -  total flux cleaned = -0.00272922 Jy
! Component: 3500  -  total flux cleaned = -0.00257232 Jy
! Component: 3550  -  total flux cleaned = -0.00267622 Jy
! Component: 3600  -  total flux cleaned = -0.00272795 Jy
! Component: 3650  -  total flux cleaned = -0.00277976 Jy
! Component: 3700  -  total flux cleaned = -0.00257445 Jy
! Component: 3750  -  total flux cleaned = -0.00257404 Jy
! Component: 3800  -  total flux cleaned = -0.00247201 Jy
! Component: 3850  -  total flux cleaned = -0.00262391 Jy
! Component: 3900  -  total flux cleaned = -0.00277527 Jy
! Component: 3950  -  total flux cleaned = -0.00267471 Jy
! Component: 4000  -  total flux cleaned = -0.00272455 Jy
! Component: 4050  -  total flux cleaned = -0.00257538 Jy
! Total flux subtracted in 4096 components = -0.00262491 Jy
! Clean residual min=-0.003846 max=0.003126 Jy/beam
! Clean residual mean=0.000005 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.732525 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 441 components and 0.732525 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J0927-2034_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.39 x 11.52 at -7.494 degrees (North through East)
! Clean map  min=-0.0054474  max=0.6853 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J0927-2034_S_map.fits
wmodel /scr/pima/rdv76_uvs/J0927-2034_S_map.mod
! Writing 441 model components to file: /scr/pima/rdv76_uvs/J0927-2034_S_map.mod
wobs   /scr/pima/rdv76_uvs/J0927-2034_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J0927-2034_S_uvs.fits
wwins  /scr/pima/rdv76_uvs/J0927-2034_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv76_uvs/J0927-2034_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.685295 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000963162 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.421641 0.421641 0.843282 1.68656 3.37313 6.74626 13.4925 26.985 53.9701
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.685 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  711.505 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J0927-2034_S_dfm.log closed on Fri Jun 15 05:53:35 2018