! Started logfile: /scr/pima/rdv76_uvs/J0730-1141_X_dfm.log on Fri Jun 15 03:52:44 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv76_uvs/J0730-1141_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J0730-1141_X_uva.fits
! AN table 1: 94 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.496712 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0730-1141
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 10272 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0730-1141_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 580 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 580 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 580 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 580 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=6.938797Jy  sigma=32.194309
! Fit after  self-cal, rms=5.858457Jy  sigma=27.379696
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6832 mas, bmaj=1.813 mas, bpa=-3.604 degrees
! Estimated noise=2.91654 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.10518 Jy
! Component: 100  -  total flux cleaned = 6.2835 Jy
! Total flux subtracted in 100 components = 6.2835 Jy
! Clean residual min=-0.101889 max=0.452094 Jy/beam
! Clean residual mean=-0.000516 rms=0.027717 Jy/beam
! Combined flux in latest and established models = 6.2835 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 6.2835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.906825Jy  sigma=4.361214
! Fit after  self-cal, rms=0.906378Jy  sigma=4.360581
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.494509 Jy
! Component: 100  -  total flux cleaned = 0.743308 Jy
! Total flux subtracted in 100 components = 0.743308 Jy
! Clean residual min=-0.055964 max=0.126201 Jy/beam
! Clean residual mean=-0.000183 rms=0.012482 Jy/beam
! Combined flux in latest and established models = 7.02681 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 7.02681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.454293Jy  sigma=2.128615
! Fit after  self-cal, rms=0.454117Jy  sigma=2.128434
! Inverting map 
! Added new window around map position (-1.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146199 Jy
! Component: 100  -  total flux cleaned = 0.249112 Jy
! Total flux subtracted in 100 components = 0.249112 Jy
! Clean residual min=-0.047941 max=0.079611 Jy/beam
! Clean residual mean=-0.000077 rms=0.009656 Jy/beam
! Combined flux in latest and established models = 7.27592 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 7.27592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.362682Jy  sigma=1.668366
! Fit after  self-cal, rms=0.360775Jy  sigma=1.661008
! Inverting map 
! Added new window around map position (-1.2, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0864089 Jy
! Component: 100  -  total flux cleaned = 0.148314 Jy
! Total flux subtracted in 100 components = 0.148314 Jy
! Clean residual min=-0.039399 max=0.063706 Jy/beam
! Clean residual mean=-0.000018 rms=0.008181 Jy/beam
! Combined flux in latest and established models = 7.42423 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 42 components and 7.42423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.322707Jy  sigma=1.454431
! Fit after  self-cal, rms=0.321265Jy  sigma=1.447850
! Inverting map 
! Added new window around map position (1, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0578531 Jy
! Component: 100  -  total flux cleaned = 0.101359 Jy
! Total flux subtracted in 100 components = 0.101359 Jy
! Clean residual min=-0.032195 max=0.034790 Jy/beam
! Clean residual mean=0.000021 rms=0.007270 Jy/beam
! Combined flux in latest and established models = 7.52559 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 58 components and 7.5256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.303524Jy  sigma=1.338461
! Fit after  self-cal, rms=0.303242Jy  sigma=1.337345
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8368 mas, bmaj=2.043 mas, bpa=-2.084 degrees
! Estimated noise=2.30405 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0644769 Jy
! Component: 100  -  total flux cleaned = 0.108611 Jy
! Component: 150  -  total flux cleaned = 0.140764 Jy
! Component: 200  -  total flux cleaned = 0.164847 Jy
! Total flux subtracted in 200 components = 0.164847 Jy
! Clean residual min=-0.040253 max=0.031069 Jy/beam
! Clean residual mean=0.000085 rms=0.008178 Jy/beam
! Combined flux in latest and established models = 7.69044 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 75 components and 7.69044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287890Jy  sigma=1.231740
! Fit after  self-cal, rms=0.287324Jy  sigma=1.228600
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8368 x 2.043 at -2.084 degrees (North through East)
! Clean map  min=-0.03828  max=6.6539 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KK        1.00     
!   KP        1.00     LA        0.97     MK        1.00     NL        1.00     
!   OV        1.01     PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KK        0.99     
!   KP        1.00     LA        0.99     MK        0.99     NL        1.00     
!   OV        1.02     PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KK        0.96     
!   KP        1.00     LA        0.99     MK        0.99     NL        1.00     
!   OV        1.00     PT        1.02     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KK        0.99     
!   KP        1.00     LA        0.98     MK        0.99     NL        0.99     
!   OV        1.00     PT        1.00     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.287324Jy  sigma=1.228600
! Fit after  self-cal, rms=0.271522Jy  sigma=1.108728
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8435 mas, bmaj=2.055 mas, bpa=-2.666 degrees
! Estimated noise=2.31804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00750128 Jy
! Component: 100  -  total flux cleaned = 0.00606042 Jy
! Component: 150  -  total flux cleaned = 0.0049128 Jy
! Component: 200  -  total flux cleaned = 0.00344625 Jy
! Total flux subtracted in 200 components = 0.00344625 Jy
! Clean residual min=-0.021579 max=0.022847 Jy/beam
! Clean residual mean=0.000110 rms=0.006069 Jy/beam
! Combined flux in latest and established models = 7.69389 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 7.69389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.268125Jy  sigma=1.096602
! Fit after  self-cal, rms=0.268051Jy  sigma=1.095741
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.268051Jy  sigma=1.095741
! Fit after  self-cal, rms=0.245268Jy  sigma=0.984210
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8435 mas, bmaj=2.056 mas, bpa=-2.707 degrees
! Estimated noise=2.31748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00342599 Jy
! Component: 100  -  total flux cleaned = -0.00597864 Jy
! Component: 150  -  total flux cleaned = -0.0075199 Jy
! Component: 200  -  total flux cleaned = -0.00783111 Jy
! Total flux subtracted in 200 components = -0.00783111 Jy
! Clean residual min=-0.014796 max=0.015823 Jy/beam
! Clean residual mean=0.000083 rms=0.003626 Jy/beam
! Combined flux in latest and established models = 7.68606 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 7.68606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242987Jy  sigma=0.979612
! Fit after  self-cal, rms=0.242940Jy  sigma=0.978989
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.8, -31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154693 Jy
! Component: 100  -  total flux cleaned = 0.0186087 Jy
! Component: 150  -  total flux cleaned = 0.0195938 Jy
! Component: 200  -  total flux cleaned = 0.0196071 Jy
! Total flux subtracted in 200 components = 0.0196071 Jy
! Clean residual min=-0.015246 max=0.013823 Jy/beam
! Clean residual mean=0.000078 rms=0.003507 Jy/beam
! Combined flux in latest and established models = 7.70566 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 118 components and 7.70566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.241395Jy  sigma=0.974376
! Fit after  self-cal, rms=0.241380Jy  sigma=0.973607
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.241380Jy  sigma=0.973607
! Fit after  self-cal, rms=0.230967Jy  sigma=0.933995
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8429 mas, bmaj=2.055 mas, bpa=-2.747 degrees
! Estimated noise=2.31695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556432 Jy
! Component: 100  -  total flux cleaned = 0.00587628 Jy
! Component: 150  -  total flux cleaned = 0.0064274 Jy
! Component: 200  -  total flux cleaned = 0.00721719 Jy
! Total flux subtracted in 200 components = 0.00721719 Jy
! Clean residual min=-0.011671 max=0.012217 Jy/beam
! Clean residual mean=0.000056 rms=0.002692 Jy/beam
! Combined flux in latest and established models = 7.71288 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 7.71288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.229937Jy  sigma=0.930900
! Fit after  self-cal, rms=0.229933Jy  sigma=0.930693
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126489 Jy
! Component: 100  -  total flux cleaned = 0.0160853 Jy
! Component: 150  -  total flux cleaned = 0.0166098 Jy
! Component: 200  -  total flux cleaned = 0.0168366 Jy
! Total flux subtracted in 200 components = 0.0168366 Jy
! Clean residual min=-0.010719 max=0.010861 Jy/beam
! Clean residual mean=0.000063 rms=0.002583 Jy/beam
! Combined flux in latest and established models = 7.72972 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 145 components and 7.72972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.228859Jy  sigma=0.927749
! Fit after  self-cal, rms=0.228797Jy  sigma=0.927297
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.228797Jy  sigma=0.927297
! Fit after  self-cal, rms=0.227995Jy  sigma=0.925594
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=3.777 mas, bpa=-1.819 degrees
! Estimated noise=3.04483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616383 Jy
! Component: 100  -  total flux cleaned = 0.00729076 Jy
! Component: 150  -  total flux cleaned = 0.00764185 Jy
! Component: 200  -  total flux cleaned = 0.00807473 Jy
! Total flux subtracted in 200 components = 0.00807473 Jy
! Clean residual min=-0.015400 max=0.012847 Jy/beam
! Clean residual mean=0.000121 rms=0.003624 Jy/beam
! Combined flux in latest and established models = 7.73779 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 164 components and 7.73779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227570Jy  sigma=0.924656
! Fit after  self-cal, rms=0.227553Jy  sigma=0.924343
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000684075 Jy
! Component: 100  -  total flux cleaned = 0.00121149 Jy
! Component: 150  -  total flux cleaned = 0.00144718 Jy
! Component: 200  -  total flux cleaned = 0.00166729 Jy
! Total flux subtracted in 200 components = 0.00166729 Jy
! Clean residual min=-0.015362 max=0.012901 Jy/beam
! Clean residual mean=0.000123 rms=0.003599 Jy/beam
! Combined flux in latest and established models = 7.73946 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 170 components and 7.73946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227422Jy  sigma=0.924275
! Fit after  self-cal, rms=0.227432Jy  sigma=0.924206
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8423 mas, bmaj=2.055 mas, bpa=-2.768 degrees
! Estimated noise=2.31647 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8423 x 2.055 at -2.768 degrees (North through East)
! Clean map  min=-0.0097387  max=6.6548 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227432Jy  sigma=0.924206
! Fit after  self-cal, rms=0.184167Jy  sigma=0.634618
! Inverting map and beam 
! Estimated beam: bmin=0.8427 mas, bmaj=2.054 mas, bpa=-2.761 degrees
! Estimated noise=2.31687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209581 Jy
! Component: 100  -  total flux cleaned = 0.00208631 Jy
! Component: 150  -  total flux cleaned = 0.0023363 Jy
! Component: 200  -  total flux cleaned = 0.00255878 Jy
! Total flux subtracted in 200 components = 0.00255878 Jy
! Clean residual min=-0.009013 max=0.008990 Jy/beam
! Clean residual mean=0.000047 rms=0.002178 Jy/beam
! Combined flux in latest and established models = 7.74202 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 177 components and 7.74202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183382Jy  sigma=0.631666
! Fit after  self-cal, rms=0.183334Jy  sigma=0.631521
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245395 Jy
! Component: 100  -  total flux cleaned = 0.000650418 Jy
! Component: 150  -  total flux cleaned = 0.000834615 Jy
! Component: 200  -  total flux cleaned = 0.000668574 Jy
! Total flux subtracted in 200 components = 0.000668574 Jy
! Clean residual min=-0.008970 max=0.008899 Jy/beam
! Clean residual mean=0.000048 rms=0.002152 Jy/beam
! Combined flux in latest and established models = 7.74269 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 181 components and 7.74269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182944Jy  sigma=0.630052
! Fit after  self-cal, rms=0.182905Jy  sigma=0.629960
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182905Jy  sigma=0.629960
! Fit after  self-cal, rms=0.182598Jy  sigma=0.629171
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6813 mas, bmaj=1.814 mas, bpa=-3.799 degrees
! Estimated noise=2.92133 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.09033 Jy
! Component: 100  -  total flux cleaned = 6.27609 Jy
! Component: 150  -  total flux cleaned = 6.7826 Jy
! Component: 200  -  total flux cleaned = 7.04112 Jy
! Total flux subtracted in 200 components = 7.04112 Jy
! Clean residual min=-0.038545 max=0.128093 Jy/beam
! Clean residual mean=-0.000230 rms=0.010307 Jy/beam
! Combined flux in latest and established models = 7.04112 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 7.04112 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8423 mas, bmaj=2.054 mas, bpa=-2.774 degrees
! Estimated noise=2.31653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.235203 Jy
! Component: 100  -  total flux cleaned = 0.371372 Jy
! Component: 150  -  total flux cleaned = 0.458886 Jy
! Component: 200  -  total flux cleaned = 0.518948 Jy
! Total flux subtracted in 200 components = 0.518948 Jy
! Clean residual min=-0.016039 max=0.034842 Jy/beam
! Clean residual mean=-0.000031 rms=0.005432 Jy/beam
! Combined flux in latest and established models = 7.56007 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 52 components and 7.56007 Jy
! Inverting map 
! Added new window around map position (1.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0429954 Jy
! Component: 100  -  total flux cleaned = 0.0739959 Jy
! Component: 150  -  total flux cleaned = 0.0971052 Jy
! Component: 200  -  total flux cleaned = 0.115325 Jy
! Total flux subtracted in 200 components = 0.115325 Jy
! Clean residual min=-0.011702 max=0.014571 Jy/beam
! Clean residual mean=0.000024 rms=0.002885 Jy/beam
! Combined flux in latest and established models = 7.6754 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 81 components and 7.6754 Jy
! Inverting map 
! Added new window around map position (-2.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156379 Jy
! Component: 100  -  total flux cleaned = 0.0278672 Jy
! Component: 150  -  total flux cleaned = 0.0348777 Jy
! Component: 200  -  total flux cleaned = 0.039221 Jy
! Total flux subtracted in 200 components = 0.039221 Jy
! Clean residual min=-0.010323 max=0.010158 Jy/beam
! Clean residual mean=0.000038 rms=0.002352 Jy/beam
! Combined flux in latest and established models = 7.71462 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 97 components and 7.71462 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.275 mas, bmaj=3.777 mas, bpa=-1.839 degrees
! Estimated noise=3.0465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109729 Jy
! Component: 100  -  total flux cleaned = 0.0183886 Jy
! Component: 150  -  total flux cleaned = 0.0223703 Jy
! Component: 200  -  total flux cleaned = 0.0248173 Jy
! Total flux subtracted in 200 components = 0.0248173 Jy
! Clean residual min=-0.014252 max=0.011777 Jy/beam
! Clean residual mean=0.000096 rms=0.003013 Jy/beam
! Combined flux in latest and established models = 7.73943 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161649 Jy
! Component: 100  -  total flux cleaned = 0.00265319 Jy
! Component: 150  -  total flux cleaned = 0.00336589 Jy
! Component: 200  -  total flux cleaned = 0.00403156 Jy
! Total flux subtracted in 200 components = 0.00403156 Jy
! Clean residual min=-0.013968 max=0.011752 Jy/beam
! Clean residual mean=0.000099 rms=0.002964 Jy/beam
! Combined flux in latest and established models = 7.74347 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 136 components and 7.74347 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8423 mas, bmaj=2.054 mas, bpa=-2.774 degrees
! Estimated noise=2.31653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00270414 Jy
! Component: 100  -  total flux cleaned = -0.00213293 Jy
! Component: 150  -  total flux cleaned = -0.0021298 Jy
! Component: 200  -  total flux cleaned = -0.00212587 Jy
! Total flux subtracted in 200 components = -0.00212587 Jy
! Clean residual min=-0.008810 max=0.008294 Jy/beam
! Clean residual mean=0.000044 rms=0.002127 Jy/beam
! Combined flux in latest and established models = 7.74134 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 150 components and 7.74134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182176Jy  sigma=0.631187
! Fit after  self-cal, rms=0.182049Jy  sigma=0.629809
wmodel J0730-1141_X_map.mod
! Writing 150 model components to file: J0730-1141_X_map.mod
wobs   J0730-1141_X_uvs.fits
! Writing UV FITS file: J0730-1141_X_uvs.fits
wwins  J0730-1141_X_map.win
! wwins: Wrote 8 windows to J0730-1141_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000997834 Jy
! Component: 100  -  total flux cleaned = -0.00131205 Jy
! Component: 150  -  total flux cleaned = -0.00101622 Jy
! Component: 200  -  total flux cleaned = -0.001014 Jy
! Component: 250  -  total flux cleaned = -0.00115096 Jy
! Component: 300  -  total flux cleaned = -0.000740085 Jy
! Component: 350  -  total flux cleaned = -0.000607183 Jy
! Component: 400  -  total flux cleaned = -0.000607336 Jy
! Component: 450  -  total flux cleaned = -0.000347286 Jy
! Component: 500  -  total flux cleaned = 3.80628e-05 Jy
! Component: 550  -  total flux cleaned = 0.00104724 Jy
! Component: 600  -  total flux cleaned = 0.00166938 Jy
! Component: 650  -  total flux cleaned = 0.00215937 Jy
! Component: 700  -  total flux cleaned = 0.00203665 Jy
! Component: 750  -  total flux cleaned = 0.00263856 Jy
! Component: 800  -  total flux cleaned = 0.00287469 Jy
! Component: 850  -  total flux cleaned = 0.00299228 Jy
! Component: 900  -  total flux cleaned = 0.00299113 Jy
! Component: 950  -  total flux cleaned = 0.00299196 Jy
! Component: 1000  -  total flux cleaned = 0.00345082 Jy
! Component: 1050  -  total flux cleaned = 0.00356302 Jy
! Component: 1100  -  total flux cleaned = 0.0039009 Jy
! Component: 1150  -  total flux cleaned = 0.00401304 Jy
! Component: 1200  -  total flux cleaned = 0.00434583 Jy
! Component: 1250  -  total flux cleaned = 0.00500384 Jy
! Component: 1300  -  total flux cleaned = 0.00467844 Jy
! Component: 1350  -  total flux cleaned = 0.00586475 Jy
! Component: 1400  -  total flux cleaned = 0.00586518 Jy
! Component: 1450  -  total flux cleaned = 0.00650179 Jy
! Component: 1500  -  total flux cleaned = 0.00650262 Jy
! Component: 1550  -  total flux cleaned = 0.00671124 Jy
! Component: 1600  -  total flux cleaned = 0.007127 Jy
! Component: 1650  -  total flux cleaned = 0.00753802 Jy
! Component: 1700  -  total flux cleaned = 0.00753716 Jy
! Component: 1750  -  total flux cleaned = 0.00783972 Jy
! Component: 1800  -  total flux cleaned = 0.00773952 Jy
! Component: 1850  -  total flux cleaned = 0.00754039 Jy
! Component: 1900  -  total flux cleaned = 0.0079362 Jy
! Component: 1950  -  total flux cleaned = 0.0080361 Jy
! Component: 2000  -  total flux cleaned = 0.00803566 Jy
! Component: 2050  -  total flux cleaned = 0.00852047 Jy
! Component: 2100  -  total flux cleaned = 0.0086166 Jy
! Component: 2150  -  total flux cleaned = 0.00890334 Jy
! Component: 2200  -  total flux cleaned = 0.00928293 Jy
! Component: 2250  -  total flux cleaned = 0.00947184 Jy
! Component: 2300  -  total flux cleaned = 0.00956545 Jy
! Component: 2350  -  total flux cleaned = 0.00993919 Jy
! Component: 2400  -  total flux cleaned = 0.0102175 Jy
! Component: 2450  -  total flux cleaned = 0.0104937 Jy
! Component: 2500  -  total flux cleaned = 0.0106767 Jy
! Component: 2550  -  total flux cleaned = 0.0114049 Jy
! Component: 2600  -  total flux cleaned = 0.0114955 Jy
! Component: 2650  -  total flux cleaned = 0.0113155 Jy
! Component: 2700  -  total flux cleaned = 0.0120319 Jy
! Component: 2750  -  total flux cleaned = 0.0125646 Jy
! Component: 2800  -  total flux cleaned = 0.0128298 Jy
! Component: 2850  -  total flux cleaned = 0.0130056 Jy
! Component: 2900  -  total flux cleaned = 0.0131809 Jy
! Component: 2950  -  total flux cleaned = 0.013616 Jy
! Component: 3000  -  total flux cleaned = 0.0140487 Jy
! Component: 3050  -  total flux cleaned = 0.013877 Jy
! Component: 3100  -  total flux cleaned = 0.0143066 Jy
! Component: 3150  -  total flux cleaned = 0.0148169 Jy
! Component: 3200  -  total flux cleaned = 0.0151558 Jy
! Component: 3250  -  total flux cleaned = 0.0150717 Jy
! Component: 3300  -  total flux cleaned = 0.0154068 Jy
! Component: 3350  -  total flux cleaned = 0.015657 Jy
! Component: 3400  -  total flux cleaned = 0.0159884 Jy
! Component: 3450  -  total flux cleaned = 0.0159065 Jy
! Component: 3500  -  total flux cleaned = 0.0163171 Jy
! Component: 3550  -  total flux cleaned = 0.0159904 Jy
! Component: 3600  -  total flux cleaned = 0.0164781 Jy
! Component: 3650  -  total flux cleaned = 0.0165586 Jy
! Component: 3700  -  total flux cleaned = 0.0167197 Jy
! Component: 3750  -  total flux cleaned = 0.0170403 Jy
! Component: 3800  -  total flux cleaned = 0.0173587 Jy
! Component: 3850  -  total flux cleaned = 0.0175171 Jy
! Component: 3900  -  total flux cleaned = 0.0176746 Jy
! Component: 3950  -  total flux cleaned = 0.0177525 Jy
! Component: 4000  -  total flux cleaned = 0.0177524 Jy
! Component: 4050  -  total flux cleaned = 0.0179082 Jy
! Total flux subtracted in 4096 components = 0.0181401 Jy
! Clean residual min=-0.004314 max=0.004043 Jy/beam
! Clean residual mean=0.000029 rms=0.001370 Jy/beam
! Combined flux in latest and established models = 7.75948 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 478 components and 7.75948 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J0730-1141_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8423 x 2.054 at -2.774 degrees (North through East)
! Clean map  min=-0.0079525  max=6.6733 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J0730-1141_X_map.fits
wmodel /scr/pima/rdv76_uvs/J0730-1141_X_map.mod
! Writing 478 model components to file: /scr/pima/rdv76_uvs/J0730-1141_X_map.mod
wobs   /scr/pima/rdv76_uvs/J0730-1141_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J0730-1141_X_uvs.fits
wwins  /scr/pima/rdv76_uvs/J0730-1141_X_map.win
! wwins: Wrote 9 windows to /scr/pima/rdv76_uvs/J0730-1141_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 6.67325 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00136776 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0614886 0.0614886 0.122977 0.245954 0.491909 0.983817 1.96763 3.93527 7.87054 15.7411 31.4822 62.9643
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0041 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       6.673 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4878.96 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J0730-1141_X_dfm.log closed on Fri Jun 15 03:52:48 2018