! Started logfile: /scr/pima/rdv76_uvs/J0648-3044_S_dfm.log on Fri Jun 15 05:52:47 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv76_uvs/J0648-3044_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J0648-3044_S_uva.fits
! AN table 1: 171 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.320988 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0648-3044
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 9880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0648-3044_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1117 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.129881Jy  sigma=11.111270
! Fit after  self-cal, rms=0.638392Jy  sigma=6.033145
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.309 mas, bmaj=6.977 mas, bpa=-8.727 degrees
! Estimated noise=1.31056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.289761 Jy
! Component: 100  -  total flux cleaned = 0.395337 Jy
! Total flux subtracted in 100 components = 0.395337 Jy
! Clean residual min=-0.019025 max=0.050265 Jy/beam
! Clean residual mean=0.000021 rms=0.005808 Jy/beam
! Combined flux in latest and established models = 0.395337 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.395337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235538Jy  sigma=2.303141
! Fit after  self-cal, rms=0.235153Jy  sigma=2.298960
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0601716 Jy
! Component: 100  -  total flux cleaned = 0.0956768 Jy
! Total flux subtracted in 100 components = 0.0956768 Jy
! Clean residual min=-0.015652 max=0.020591 Jy/beam
! Clean residual mean=0.000027 rms=0.003777 Jy/beam
! Combined flux in latest and established models = 0.491014 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.491014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.211147Jy  sigma=2.025124
! Fit after  self-cal, rms=0.211037Jy  sigma=2.023627
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.83 mas, bmaj=7.925 mas, bpa=-10.1 degrees
! Estimated noise=0.822451 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0403602 Jy
! Component: 100  -  total flux cleaned = 0.0622785 Jy
! Component: 150  -  total flux cleaned = 0.0753806 Jy
! Component: 200  -  total flux cleaned = 0.0835098 Jy
! Total flux subtracted in 200 components = 0.0835098 Jy
! Clean residual min=-0.014026 max=0.011266 Jy/beam
! Clean residual mean=0.000095 rms=0.002869 Jy/beam
! Combined flux in latest and established models = 0.574523 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.574523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203930Jy  sigma=1.940010
! Fit after  self-cal, rms=0.203763Jy  sigma=1.938128
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.83 x 7.925 at -10.1 degrees (North through East)
! Clean map  min=-0.013657  max=0.39276 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.87     KK        0.99     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.85     KK        1.04     KP        1.02     
!   LA        0.99     MK        0.99     NL        1.09     OV        0.95     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.88     KK        1.09     KP        1.03     
!   LA        1.03     MK        0.97     NL        1.05     OV        1.02     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.89     KK        1.07     KP        0.98     
!   LA        1.00     MK        0.96     NL        1.04     OV        0.99     
!   PT        1.03     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.203763Jy  sigma=1.938128
! Fit after  self-cal, rms=0.201545Jy  sigma=1.903875
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=7.912 mas, bpa=-10.24 degrees
! Estimated noise=0.828315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134478 Jy
! Component: 100  -  total flux cleaned = 0.000762571 Jy
! Component: 150  -  total flux cleaned = 0.000372386 Jy
! Component: 200  -  total flux cleaned = 2.33651e-05 Jy
! Total flux subtracted in 200 components = 2.33651e-05 Jy
! Clean residual min=-0.006038 max=0.006336 Jy/beam
! Clean residual mean=0.000010 rms=0.001520 Jy/beam
! Combined flux in latest and established models = 0.574547 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 75 components and 0.574547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201402Jy  sigma=1.902678
! Fit after  self-cal, rms=0.201559Jy  sigma=1.902057
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201559Jy  sigma=1.902057
! Fit after  self-cal, rms=0.201325Jy  sigma=1.900511
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.832 mas, bmaj=7.905 mas, bpa=-10.19 degrees
! Estimated noise=0.8276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529077 Jy
! Component: 100  -  total flux cleaned = 0.000271546 Jy
! Component: 150  -  total flux cleaned = -0.000111237 Jy
! Component: 200  -  total flux cleaned = -0.000383816 Jy
! Total flux subtracted in 200 components = -0.000383816 Jy
! Clean residual min=-0.005915 max=0.006141 Jy/beam
! Clean residual mean=0.000004 rms=0.001489 Jy/beam
! Combined flux in latest and established models = 0.574163 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 84 components and 0.574163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201252Jy  sigma=1.899973
! Fit after  self-cal, rms=0.201248Jy  sigma=1.899885
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299787 Jy
! Component: 100  -  total flux cleaned = 0.000230041 Jy
! Component: 150  -  total flux cleaned = 5.64886e-05 Jy
! Component: 200  -  total flux cleaned = -4.82173e-05 Jy
! Total flux subtracted in 200 components = -4.82173e-05 Jy
! Clean residual min=-0.005886 max=0.006072 Jy/beam
! Clean residual mean=0.000004 rms=0.001477 Jy/beam
! Combined flux in latest and established models = 0.574115 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.574115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201206Jy  sigma=1.899572
! Fit after  self-cal, rms=0.201201Jy  sigma=1.899524
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201201Jy  sigma=1.899524
! Fit after  self-cal, rms=0.200456Jy  sigma=1.892621
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.829 mas, bmaj=7.875 mas, bpa=-10.08 degrees
! Estimated noise=0.826226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102684 Jy
! Component: 100  -  total flux cleaned = -0.000164142 Jy
! Component: 150  -  total flux cleaned = -0.000270247 Jy
! Component: 200  -  total flux cleaned = -0.000318082 Jy
! Total flux subtracted in 200 components = -0.000318082 Jy
! Clean residual min=-0.005867 max=0.005809 Jy/beam
! Clean residual mean=-0.000002 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.573796 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.573797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200418Jy  sigma=1.892365
! Fit after  self-cal, rms=0.200449Jy  sigma=1.892269
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011663 Jy
! Component: 100  -  total flux cleaned = 2.83983e-05 Jy
! Component: 150  -  total flux cleaned = -1.30316e-05 Jy
! Component: 200  -  total flux cleaned = -8.88114e-05 Jy
! Total flux subtracted in 200 components = -8.88114e-05 Jy
! Clean residual min=-0.005859 max=0.005769 Jy/beam
! Clean residual mean=-0.000002 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.573708 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 111 components and 0.573708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200430Jy  sigma=1.892131
! Fit after  self-cal, rms=0.200428Jy  sigma=1.892120
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200428Jy  sigma=1.892120
! Fit after  self-cal, rms=0.200152Jy  sigma=1.892074
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.755 mas, bmaj=22.38 mas, bpa=-4.275 degrees
! Estimated noise=1.05841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.40125e-05 Jy
! Component: 100  -  total flux cleaned = -5.57125e-05 Jy
! Component: 150  -  total flux cleaned = -7.08245e-05 Jy
! Component: 200  -  total flux cleaned = -8.51245e-05 Jy
! Total flux subtracted in 200 components = -8.51245e-05 Jy
! Clean residual min=-0.004979 max=0.005521 Jy/beam
! Clean residual mean=-0.000013 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.573623 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 115 components and 0.573623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200146Jy  sigma=1.892037
! Fit after  self-cal, rms=0.200146Jy  sigma=1.892032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0474e-05 Jy
! Component: 100  -  total flux cleaned = -3.4036e-05 Jy
! Component: 150  -  total flux cleaned = -6.08085e-05 Jy
! Component: 200  -  total flux cleaned = -7.37086e-05 Jy
! Total flux subtracted in 200 components = -7.37086e-05 Jy
! Clean residual min=-0.004995 max=0.005507 Jy/beam
! Clean residual mean=-0.000013 rms=0.001399 Jy/beam
! Combined flux in latest and established models = 0.573549 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 117 components and 0.573549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200143Jy  sigma=1.892008
! Fit after  self-cal, rms=0.200143Jy  sigma=1.892006
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.826 mas, bmaj=7.862 mas, bpa=-10.03 degrees
! Estimated noise=0.825297 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.826 x 7.862 at -10.03 degrees (North through East)
! Clean map  min=-0.0056536  max=0.39198 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.306 mas, bmaj=6.983 mas, bpa=-8.527 degrees
! Estimated noise=1.38785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.287908 Jy
! Component: 100  -  total flux cleaned = 0.397101 Jy
! Component: 150  -  total flux cleaned = 0.456212 Jy
! Component: 200  -  total flux cleaned = 0.491617 Jy
! Total flux subtracted in 200 components = 0.491617 Jy
! Clean residual min=-0.014224 max=0.018946 Jy/beam
! Clean residual mean=-0.000010 rms=0.003342 Jy/beam
! Combined flux in latest and established models = 0.491617 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.491617 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.826 mas, bmaj=7.862 mas, bpa=-10.03 degrees
! Estimated noise=0.825297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376414 Jy
! Component: 100  -  total flux cleaned = 0.0568516 Jy
! Component: 150  -  total flux cleaned = 0.0678501 Jy
! Component: 200  -  total flux cleaned = 0.0744182 Jy
! Total flux subtracted in 200 components = 0.0744182 Jy
! Clean residual min=-0.006303 max=0.005972 Jy/beam
! Clean residual mean=-0.000020 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 0.566035 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 62 components and 0.566035 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.755 mas, bmaj=22.38 mas, bpa=-4.275 degrees
! Estimated noise=1.05841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00508626 Jy
! Component: 100  -  total flux cleaned = 0.00667524 Jy
! Component: 150  -  total flux cleaned = 0.0067643 Jy
! Component: 200  -  total flux cleaned = 0.00689217 Jy
! Total flux subtracted in 200 components = 0.00689217 Jy
! Clean residual min=-0.004826 max=0.005315 Jy/beam
! Clean residual mean=-0.000016 rms=0.001414 Jy/beam
! Combined flux in latest and established models = 0.572927 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011517 Jy
! Component: 100  -  total flux cleaned = 0.000221692 Jy
! Component: 150  -  total flux cleaned = 0.000287118 Jy
! Component: 200  -  total flux cleaned = 0.00028781 Jy
! Total flux subtracted in 200 components = 0.00028781 Jy
! Clean residual min=-0.004833 max=0.005334 Jy/beam
! Clean residual mean=-0.000015 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.573215 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.573215 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.826 mas, bmaj=7.862 mas, bpa=-10.03 degrees
! Estimated noise=0.825297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000401924 Jy
! Component: 100  -  total flux cleaned = -0.000313313 Jy
! Component: 150  -  total flux cleaned = -0.000319455 Jy
! Component: 200  -  total flux cleaned = -0.000252931 Jy
! Total flux subtracted in 200 components = -0.000252931 Jy
! Clean residual min=-0.005918 max=0.005726 Jy/beam
! Clean residual mean=-0.000007 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.572962 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.572962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200223Jy  sigma=1.892647
! Fit after  self-cal, rms=0.200201Jy  sigma=1.892546
wmodel J0648-3044_S_map.mod
! Writing 94 model components to file: J0648-3044_S_map.mod
wobs   J0648-3044_S_uvs.fits
! Writing UV FITS file: J0648-3044_S_uvs.fits
wwins  J0648-3044_S_map.win
! wwins: Wrote 2 windows to J0648-3044_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00045335 Jy
! Component: 100  -  total flux cleaned = -0.00132095 Jy
! Component: 150  -  total flux cleaned = -0.00169029 Jy
! Component: 200  -  total flux cleaned = -0.00240234 Jy
! Component: 250  -  total flux cleaned = -0.00300572 Jy
! Component: 300  -  total flux cleaned = -0.00334154 Jy
! Component: 350  -  total flux cleaned = -0.0038312 Jy
! Component: 400  -  total flux cleaned = -0.00406941 Jy
! Component: 450  -  total flux cleaned = -0.00414631 Jy
! Component: 500  -  total flux cleaned = -0.00391732 Jy
! Component: 550  -  total flux cleaned = -0.00347237 Jy
! Component: 600  -  total flux cleaned = -0.00325432 Jy
! Component: 650  -  total flux cleaned = -0.00289751 Jy
! Component: 700  -  total flux cleaned = -0.00275828 Jy
! Component: 750  -  total flux cleaned = -0.00234509 Jy
! Component: 800  -  total flux cleaned = -0.00207328 Jy
! Component: 850  -  total flux cleaned = -0.00180647 Jy
! Component: 900  -  total flux cleaned = -0.00154586 Jy
! Component: 950  -  total flux cleaned = -0.00141835 Jy
! Component: 1000  -  total flux cleaned = -0.00141694 Jy
! Component: 1050  -  total flux cleaned = -0.00116507 Jy
! Component: 1100  -  total flux cleaned = -0.00116433 Jy
! Component: 1150  -  total flux cleaned = -0.00104102 Jy
! Component: 1200  -  total flux cleaned = -0.00104065 Jy
! Component: 1250  -  total flux cleaned = -0.000920305 Jy
! Component: 1300  -  total flux cleaned = -0.000920559 Jy
! Component: 1350  -  total flux cleaned = -0.000919699 Jy
! Component: 1400  -  total flux cleaned = -0.000690589 Jy
! Component: 1450  -  total flux cleaned = -0.000690663 Jy
! Component: 1500  -  total flux cleaned = -0.0007463 Jy
! Component: 1550  -  total flux cleaned = -0.000691058 Jy
! Component: 1600  -  total flux cleaned = -0.000526583 Jy
! Component: 1650  -  total flux cleaned = -0.000310307 Jy
! Component: 1700  -  total flux cleaned = -0.000150841 Jy
! Component: 1750  -  total flux cleaned = -0.000255599 Jy
! Component: 1800  -  total flux cleaned = 6.35972e-06 Jy
! Component: 1850  -  total flux cleaned = 0.000161949 Jy
! Component: 1900  -  total flux cleaned = 0.000264303 Jy
! Component: 1950  -  total flux cleaned = 0.00036597 Jy
! Component: 2000  -  total flux cleaned = 0.00056587 Jy
! Component: 2050  -  total flux cleaned = 0.000615568 Jy
! Component: 2100  -  total flux cleaned = 0.000713132 Jy
! Component: 2150  -  total flux cleaned = 0.000760806 Jy
! Component: 2200  -  total flux cleaned = 0.000760501 Jy
! Component: 2250  -  total flux cleaned = 0.00071288 Jy
! Component: 2300  -  total flux cleaned = 0.000713036 Jy
! Component: 2350  -  total flux cleaned = 0.000713131 Jy
! Component: 2400  -  total flux cleaned = 0.000713127 Jy
! Component: 2450  -  total flux cleaned = 0.000667294 Jy
! Component: 2500  -  total flux cleaned = 0.000803648 Jy
! Component: 2550  -  total flux cleaned = 0.000667457 Jy
! Component: 2600  -  total flux cleaned = 0.000711341 Jy
! Component: 2650  -  total flux cleaned = 0.00057893 Jy
! Component: 2700  -  total flux cleaned = 0.000623317 Jy
! Component: 2750  -  total flux cleaned = 0.000927364 Jy
! Component: 2800  -  total flux cleaned = 0.000969912 Jy
! Component: 2850  -  total flux cleaned = 0.00084157 Jy
! Component: 2900  -  total flux cleaned = 0.000883842 Jy
! Component: 2950  -  total flux cleaned = 0.00100995 Jy
! Component: 3000  -  total flux cleaned = 0.00113453 Jy
! Component: 3050  -  total flux cleaned = 0.00121671 Jy
! Component: 3100  -  total flux cleaned = 0.00109365 Jy
! Component: 3150  -  total flux cleaned = 0.00117527 Jy
! Component: 3200  -  total flux cleaned = 0.00121559 Jy
! Component: 3250  -  total flux cleaned = 0.00121559 Jy
! Component: 3300  -  total flux cleaned = 0.00121583 Jy
! Component: 3350  -  total flux cleaned = 0.00133511 Jy
! Component: 3400  -  total flux cleaned = 0.00133522 Jy
! Component: 3450  -  total flux cleaned = 0.00149127 Jy
! Component: 3500  -  total flux cleaned = 0.00156863 Jy
! Component: 3550  -  total flux cleaned = 0.00164553 Jy
! Component: 3600  -  total flux cleaned = 0.00168396 Jy
! Component: 3650  -  total flux cleaned = 0.00172175 Jy
! Component: 3700  -  total flux cleaned = 0.00190972 Jy
! Component: 3750  -  total flux cleaned = 0.00194685 Jy
! Component: 3800  -  total flux cleaned = 0.00209556 Jy
! Component: 3850  -  total flux cleaned = 0.00216935 Jy
! Component: 3900  -  total flux cleaned = 0.00231591 Jy
! Component: 3950  -  total flux cleaned = 0.00246129 Jy
! Component: 4000  -  total flux cleaned = 0.0024612 Jy
! Component: 4050  -  total flux cleaned = 0.00246123 Jy
! Total flux subtracted in 4096 components = 0.00263991 Jy
! Clean residual min=-0.002055 max=0.002205 Jy/beam
! Clean residual mean=0.000004 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.575602 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 382 components and 0.575601 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J0648-3044_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.826 x 7.862 at -10.03 degrees (North through East)
! Clean map  min=-0.004863  max=0.39177 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J0648-3044_S_map.fits
wmodel /scr/pima/rdv76_uvs/J0648-3044_S_map.mod
! Writing 382 model components to file: /scr/pima/rdv76_uvs/J0648-3044_S_map.mod
wobs   /scr/pima/rdv76_uvs/J0648-3044_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J0648-3044_S_uvs.fits
wwins  /scr/pima/rdv76_uvs/J0648-3044_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv76_uvs/J0648-3044_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.391768 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00065748 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.503471 0.503471 1.00694 2.01388 4.02777 8.05553 16.1111 32.2221 64.4443
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.391 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  595.863 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J0648-3044_S_dfm.log closed on Fri Jun 15 05:52:51 2018