! Started logfile: /scr/pima/rdv76_uvs/J0336+3218_X_dfm.log on Fri Jun 15 03:51:03 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rdv76_uvs/J0336+3218_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv76_uvs/J0336+3218_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! AN table 2: 228 integrations on 55 of 55 possible baselines. ! AN table 3: 105 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.408376 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0336+3218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 33152 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0336+3218_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 115 telescope corrections were flagged in sub-array 1. ! A total of 1453 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 115 telescope corrections were flagged in sub-array 1. ! A total of 1453 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 115 telescope corrections were flagged in sub-array 1. ! A total of 1453 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! A total of 1453 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.206951Jy sigma=13.714712 ! Fit after self-cal, rms=0.535458Jy sigma=5.985994 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Estimated beam: bmin=0.523 mas, bmaj=0.9317 mas, bpa=-5.646 degrees ! Estimated noise=0.642355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.401305 Jy ! Component: 100 - total flux cleaned = 0.517843 Jy ! Total flux subtracted in 100 components = 0.517843 Jy ! Clean residual min=-0.032239 max=0.127770 Jy/beam ! Clean residual mean=-0.000103 rms=0.007408 Jy/beam ! Combined flux in latest and established models = 0.517843 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.517843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349268Jy sigma=3.840386 ! Fit after self-cal, rms=0.348993Jy sigma=3.837977 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130248 Jy ! Component: 100 - total flux cleaned = 0.198354 Jy ! Total flux subtracted in 100 components = 0.198354 Jy ! Clean residual min=-0.022384 max=0.067918 Jy/beam ! Clean residual mean=-0.000069 rms=0.005110 Jy/beam ! Combined flux in latest and established models = 0.716197 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.716197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272028Jy sigma=2.949028 ! Fit after self-cal, rms=0.263077Jy sigma=2.854067 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594157 Jy ! Component: 100 - total flux cleaned = 0.0949441 Jy ! Total flux subtracted in 100 components = 0.0949441 Jy ! Clean residual min=-0.017765 max=0.048863 Jy/beam ! Clean residual mean=-0.000053 rms=0.003950 Jy/beam ! Combined flux in latest and established models = 0.811142 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.811142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238722Jy sigma=2.573337 ! Fit after self-cal, rms=0.237265Jy sigma=2.559161 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (5.2, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495714 Jy ! Component: 100 - total flux cleaned = 0.0837037 Jy ! Total flux subtracted in 100 components = 0.0837037 Jy ! Clean residual min=-0.015013 max=0.027862 Jy/beam ! Clean residual mean=-0.000047 rms=0.003170 Jy/beam ! Combined flux in latest and established models = 0.894845 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.894845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217148Jy sigma=2.312788 ! Fit after self-cal, rms=0.216355Jy sigma=2.305325 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320727 Jy ! Component: 100 - total flux cleaned = 0.0572148 Jy ! Total flux subtracted in 100 components = 0.0572148 Jy ! Clean residual min=-0.012764 max=0.022594 Jy/beam ! Clean residual mean=-0.000039 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.95206 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 59 components and 0.95206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206113Jy sigma=2.180919 ! Fit after self-cal, rms=0.205690Jy sigma=2.176907 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (4.4, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258378 Jy ! Component: 100 - total flux cleaned = 0.0466018 Jy ! Total flux subtracted in 100 components = 0.0466018 Jy ! Clean residual min=-0.011685 max=0.018113 Jy/beam ! Clean residual mean=-0.000032 rms=0.002425 Jy/beam ! Combined flux in latest and established models = 0.998662 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 0.998662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198524Jy sigma=2.087190 ! Fit after self-cal, rms=0.198259Jy sigma=2.084889 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (3.6, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195251 Jy ! Component: 100 - total flux cleaned = 0.0359942 Jy ! Total flux subtracted in 100 components = 0.0359942 Jy ! Clean residual min=-0.010653 max=0.014882 Jy/beam ! Clean residual mean=-0.000027 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 1.03466 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 86 components and 1.03466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193864Jy sigma=2.029361 ! Fit after self-cal, rms=0.193701Jy sigma=2.027967 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (6, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160621 Jy ! Component: 100 - total flux cleaned = 0.0296449 Jy ! Total flux subtracted in 100 components = 0.0296449 Jy ! Clean residual min=-0.009951 max=0.012307 Jy/beam ! Clean residual mean=-0.000023 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 1.0643 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 1.0643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190685Jy sigma=1.989427 ! Fit after self-cal, rms=0.190579Jy sigma=1.988597 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Estimated beam: bmin=0.6469 mas, bmaj=1.099 mas, bpa=-5.584 degrees ! Estimated noise=0.377558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025619 Jy ! Component: 100 - total flux cleaned = 0.0453354 Jy ! Component: 150 - total flux cleaned = 0.061173 Jy ! Component: 200 - total flux cleaned = 0.074175 Jy ! Total flux subtracted in 200 components = 0.074175 Jy ! Clean residual min=-0.006995 max=0.011306 Jy/beam ! Clean residual mean=0.000013 rms=0.001979 Jy/beam ! Combined flux in latest and established models = 1.13848 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 128 components and 1.13848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185677Jy sigma=1.923603 ! Fit after self-cal, rms=0.185403Jy sigma=1.920956 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec ! Added new window around map position (7.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137735 Jy ! Component: 100 - total flux cleaned = 0.0242525 Jy ! Component: 150 - total flux cleaned = 0.0328003 Jy ! Component: 200 - total flux cleaned = 0.0399445 Jy ! Total flux subtracted in 200 components = 0.0399445 Jy ! Clean residual min=-0.006278 max=0.007301 Jy/beam ! Clean residual mean=-0.000010 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 1.17842 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 157 components and 1.17842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184037Jy sigma=1.900914 ! Fit after self-cal, rms=0.183915Jy sigma=1.899626 ! Inverting map ! Your choice of large map pixels excluded 1.98% of the data. ! The x-axis pixel size should ideally be below 0.1821 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6469 x 1.099 at -5.584 degrees (North through East) ! Clean map min=-0.0058385 max=0.50644 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.05 KP 0.98 ! LA 0.96 MK 1.02 NL 1.03 NY 1.06 ! OV 1.01 PT 0.99 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 KP 1.02 LA 0.97 ! NL 1.05 NY 1.06 OV 1.00 PT 1.01 ! SC 1.05 WZ 1.02 ZC 0.97 ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 KK 1.07 KP 0.98 ! LA 0.93 MK 1.04 NL 1.03 NY 1.05 ! OV 1.03 PT 0.98 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.04 KP 0.99 ! LA 0.96 MK 1.02 NL 1.01 NY 1.04 ! OV 1.01 PT 0.99 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 KP 1.02 LA 0.97 ! NL 1.04 NY 1.03 OV 0.99 PT 1.00 ! SC 1.02 WZ 1.04 ZC 1.01 ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 KK 0.98 KP 0.99 ! LA 0.93 MK 1.04 NL 1.02 NY 1.05 ! OV 1.02 PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.01 KP 0.96 ! LA 0.95 MK 1.02 NL 1.00 NY 0.97 ! OV 1.00 PT 0.98 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 KP 1.02 LA 0.98 ! NL 1.01 NY 0.97 OV 0.97 PT 1.00 ! SC 0.99 WZ 0.98 ZC 0.98 ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 KK 0.98 KP 0.97 ! LA 0.93 MK 0.97 NL 1.03 NY 0.97 ! OV 1.00 PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.02 KP 0.99 ! LA 0.94 MK 0.99 NL 0.99 NY 0.91 ! OV 0.99 PT 0.96 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 KP 1.01 LA 0.96 ! NL 1.01 NY 0.94 OV 0.99 PT 0.99 ! SC 0.96 WZ 0.96 ZC 1.01 ! ! A total of 90 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 KK 0.98 KP 0.94 ! LA 0.93 MK 0.95 NL 1.01 NY 0.96 ! OV 0.99 PT 0.97 SC 0.99 ! ! ! Fit before self-cal, rms=0.183915Jy sigma=1.899626 ! Fit after self-cal, rms=0.180049Jy sigma=1.873426 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.6498 mas, bmaj=1.104 mas, bpa=-5.416 degrees ! Estimated noise=0.377657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524083 Jy ! Component: 100 - total flux cleaned = 0.00776004 Jy ! Component: 150 - total flux cleaned = 0.010135 Jy ! Component: 200 - total flux cleaned = 0.012089 Jy ! Total flux subtracted in 200 components = 0.012089 Jy ! Clean residual min=-0.004500 max=0.004998 Jy/beam ! Clean residual mean=-0.000063 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 1.19051 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 176 components and 1.19051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179786Jy sigma=1.869440 ! Fit after self-cal, rms=0.179789Jy sigma=1.869074 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179789Jy sigma=1.869074 ! Fit after self-cal, rms=0.179321Jy sigma=1.862837 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.65 mas, bmaj=1.105 mas, bpa=-5.444 degrees ! Estimated noise=0.377407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380999 Jy ! Component: 100 - total flux cleaned = 0.00587312 Jy ! Component: 150 - total flux cleaned = 0.00736249 Jy ! Component: 200 - total flux cleaned = 0.00854281 Jy ! Total flux subtracted in 200 components = 0.00854281 Jy ! Clean residual min=-0.003869 max=0.004820 Jy/beam ! Clean residual mean=-0.000033 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 1.19905 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 183 components and 1.19905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179183Jy sigma=1.860867 ! Fit after self-cal, rms=0.179165Jy sigma=1.860695 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.4, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043546 Jy ! Component: 100 - total flux cleaned = 0.00602659 Jy ! Component: 150 - total flux cleaned = 0.00732252 Jy ! Component: 200 - total flux cleaned = 0.00843825 Jy ! Total flux subtracted in 200 components = 0.00843825 Jy ! Clean residual min=-0.003898 max=0.003783 Jy/beam ! Clean residual mean=-0.000042 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 1.20749 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 195 components and 1.20749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179027Jy sigma=1.859024 ! Fit after self-cal, rms=0.179010Jy sigma=1.858891 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179010Jy sigma=1.858891 ! Fit after self-cal, rms=0.178937Jy sigma=1.856770 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.6501 mas, bmaj=1.106 mas, bpa=-5.476 degrees ! Estimated noise=0.37726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296417 Jy ! Component: 100 - total flux cleaned = 0.00424217 Jy ! Component: 150 - total flux cleaned = 0.0054125 Jy ! Component: 200 - total flux cleaned = 0.00636681 Jy ! Total flux subtracted in 200 components = 0.00636681 Jy ! Clean residual min=-0.003576 max=0.003619 Jy/beam ! Clean residual mean=0.000046 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 1.21386 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 204 components and 1.21386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178862Jy sigma=1.855819 ! Fit after self-cal, rms=0.178855Jy sigma=1.855729 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627081 Jy ! Component: 100 - total flux cleaned = 0.00151459 Jy ! Component: 150 - total flux cleaned = 0.00235755 Jy ! Component: 200 - total flux cleaned = 0.00306568 Jy ! Total flux subtracted in 200 components = 0.00306568 Jy ! Clean residual min=-0.003544 max=0.003581 Jy/beam ! Clean residual mean=0.000044 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 1.21692 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 214 components and 1.21692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178819Jy sigma=1.855283 ! Fit after self-cal, rms=0.178810Jy sigma=1.855235 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178810Jy sigma=1.855235 ! Fit after self-cal, rms=0.178743Jy sigma=1.855065 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=2.588 mas, bmaj=2.853 mas, bpa=-74.92 degrees ! Estimated noise=0.544507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426925 Jy ! Component: 100 - total flux cleaned = 0.00724641 Jy ! Component: 150 - total flux cleaned = 0.00937579 Jy ! Component: 200 - total flux cleaned = 0.0103961 Jy ! Total flux subtracted in 200 components = 0.0103961 Jy ! Clean residual min=-0.004262 max=0.004495 Jy/beam ! Clean residual mean=0.000108 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 1.22732 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 226 components and 1.22732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178746Jy sigma=1.854936 ! Fit after self-cal, rms=0.178735Jy sigma=1.854836 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000760355 Jy ! Component: 100 - total flux cleaned = 0.0016782 Jy ! Component: 150 - total flux cleaned = 0.00240613 Jy ! Component: 200 - total flux cleaned = 0.0028471 Jy ! Total flux subtracted in 200 components = 0.0028471 Jy ! Clean residual min=-0.004203 max=0.004326 Jy/beam ! Clean residual mean=0.000102 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 1.23017 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 230 components and 1.23017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178745Jy sigma=1.854872 ! Fit after self-cal, rms=0.178737Jy sigma=1.854821 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.6501 mas, bmaj=1.106 mas, bpa=-5.467 degrees ! Estimated noise=0.377069 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6501 x 1.106 at -5.467 degrees (North through East) ! Clean map min=-0.002845 max=0.50032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178737Jy sigma=1.854821 ! Fit after self-cal, rms=0.176361Jy sigma=1.722776 ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.6501 mas, bmaj=1.107 mas, bpa=-5.424 degrees ! Estimated noise=0.37667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124482 Jy ! Component: 100 - total flux cleaned = 0.001368 Jy ! Component: 150 - total flux cleaned = 0.00141895 Jy ! Component: 200 - total flux cleaned = 0.00141759 Jy ! Total flux subtracted in 200 components = 0.00141759 Jy ! Clean residual min=-0.003419 max=0.003343 Jy/beam ! Clean residual mean=0.000028 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.23159 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 235 components and 1.23159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176322Jy sigma=1.722333 ! Fit after self-cal, rms=0.176314Jy sigma=1.722298 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260177 Jy ! Component: 100 - total flux cleaned = 0.000350091 Jy ! Component: 150 - total flux cleaned = 0.000434452 Jy ! Component: 200 - total flux cleaned = 0.000435076 Jy ! Total flux subtracted in 200 components = 0.000435076 Jy ! Clean residual min=-0.003411 max=0.003327 Jy/beam ! Clean residual mean=0.000028 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 1.23202 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 242 components and 1.23202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176294Jy sigma=1.722052 ! Fit after self-cal, rms=0.176290Jy sigma=1.722032 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176290Jy sigma=1.722032 ! Fit after self-cal, rms=0.176967Jy sigma=1.721971 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.5247 mas, bmaj=0.9324 mas, bpa=-5.43 degrees ! Estimated noise=0.650414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.400217 Jy ! Component: 100 - total flux cleaned = 0.568152 Jy ! Component: 150 - total flux cleaned = 0.672995 Jy ! Component: 200 - total flux cleaned = 0.743264 Jy ! Total flux subtracted in 200 components = 0.743264 Jy ! Clean residual min=-0.015224 max=0.041101 Jy/beam ! Clean residual mean=-0.000059 rms=0.004122 Jy/beam ! Combined flux in latest and established models = 0.743264 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.743264 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.6499 mas, bmaj=1.107 mas, bpa=-5.409 degrees ! Estimated noise=0.376395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0997485 Jy ! Component: 100 - total flux cleaned = 0.173022 Jy ! Component: 150 - total flux cleaned = 0.2291 Jy ! Component: 200 - total flux cleaned = 0.272898 Jy ! Total flux subtracted in 200 components = 0.272898 Jy ! Clean residual min=-0.010383 max=0.025828 Jy/beam ! Clean residual mean=0.000147 rms=0.003412 Jy/beam ! Combined flux in latest and established models = 1.01616 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 71 components and 1.01616 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345844 Jy ! Component: 100 - total flux cleaned = 0.0622769 Jy ! Component: 150 - total flux cleaned = 0.0847514 Jy ! Component: 200 - total flux cleaned = 0.103154 Jy ! Total flux subtracted in 200 components = 0.103154 Jy ! Clean residual min=-0.005736 max=0.012087 Jy/beam ! Clean residual mean=0.000096 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 1.11932 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 128 components and 1.11932 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Added new window around map position (2.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153206 Jy ! Component: 100 - total flux cleaned = 0.0280499 Jy ! Component: 150 - total flux cleaned = 0.0387471 Jy ! Component: 200 - total flux cleaned = 0.0477984 Jy ! Total flux subtracted in 200 components = 0.0477984 Jy ! Clean residual min=-0.004210 max=0.006424 Jy/beam ! Clean residual mean=0.000071 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 1.16711 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 178 components and 1.16711 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Added new window around map position (6.4, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790421 Jy ! Component: 100 - total flux cleaned = 0.0147169 Jy ! Component: 150 - total flux cleaned = 0.0207124 Jy ! Component: 200 - total flux cleaned = 0.0259994 Jy ! Total flux subtracted in 200 components = 0.0259994 Jy ! Clean residual min=-0.003641 max=0.004295 Jy/beam ! Clean residual mean=0.000055 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 1.19311 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 207 components and 1.19311 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Added new window around map position (5.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488179 Jy ! Component: 100 - total flux cleaned = 0.00905815 Jy ! Component: 150 - total flux cleaned = 0.012757 Jy ! Component: 200 - total flux cleaned = 0.0160504 Jy ! Total flux subtracted in 200 components = 0.0160504 Jy ! Clean residual min=-0.003422 max=0.003831 Jy/beam ! Clean residual mean=0.000046 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 1.20916 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 225 components and 1.20916 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Added new window around map position (9.2, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379402 Jy ! Component: 100 - total flux cleaned = 0.00665578 Jy ! Component: 150 - total flux cleaned = 0.00919998 Jy ! Component: 200 - total flux cleaned = 0.0114788 Jy ! Total flux subtracted in 200 components = 0.0114788 Jy ! Clean residual min=-0.003464 max=0.003352 Jy/beam ! Clean residual mean=0.000037 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 1.22064 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 248 components and 1.22064 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=2.586 mas, bmaj=2.846 mas, bpa=-75.22 degrees ! Estimated noise=0.544502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454404 Jy ! Component: 100 - total flux cleaned = 0.00792932 Jy ! Component: 150 - total flux cleaned = 0.0105743 Jy ! Component: 200 - total flux cleaned = 0.0126689 Jy ! Total flux subtracted in 200 components = 0.0126689 Jy ! Clean residual min=-0.004221 max=0.003977 Jy/beam ! Clean residual mean=0.000082 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 1.23331 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166417 Jy ! Component: 100 - total flux cleaned = 0.00298958 Jy ! Component: 150 - total flux cleaned = 0.00405558 Jy ! Component: 200 - total flux cleaned = 0.00491683 Jy ! Total flux subtracted in 200 components = 0.00491683 Jy ! Clean residual min=-0.004139 max=0.003702 Jy/beam ! Clean residual mean=0.000072 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 1.23823 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 283 components and 1.23823 Jy ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! Estimated beam: bmin=0.6499 mas, bmaj=1.107 mas, bpa=-5.409 degrees ! Estimated noise=0.376395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739194 Jy ! Component: 100 - total flux cleaned = -0.000949721 Jy ! Component: 150 - total flux cleaned = -0.00104276 Jy ! Component: 200 - total flux cleaned = -0.00104218 Jy ! Total flux subtracted in 200 components = -0.00104218 Jy ! Clean residual min=-0.003315 max=0.003160 Jy/beam ! Clean residual mean=0.000026 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 1.23719 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 301 components and 1.23719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176838Jy sigma=1.720667 ! Fit after self-cal, rms=0.176802Jy sigma=1.720300 wmodel J0336+3218_X_map.mod ! Writing 301 model components to file: J0336+3218_X_map.mod wobs J0336+3218_X_uvs.fits ! Writing UV FITS file: J0336+3218_X_uvs.fits wwins J0336+3218_X_map.win ! wwins: Wrote 14 windows to J0336+3218_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335556 Jy ! Component: 100 - total flux cleaned = 0.000892196 Jy ! Component: 150 - total flux cleaned = 0.00126516 Jy ! Component: 200 - total flux cleaned = 0.00162758 Jy ! Component: 250 - total flux cleaned = 0.00178011 Jy ! Component: 300 - total flux cleaned = 0.00192883 Jy ! Component: 350 - total flux cleaned = 0.00197736 Jy ! Component: 400 - total flux cleaned = 0.0020249 Jy ! Component: 450 - total flux cleaned = 0.00197826 Jy ! Component: 500 - total flux cleaned = 0.00179479 Jy ! Component: 550 - total flux cleaned = 0.00188727 Jy ! Component: 600 - total flux cleaned = 0.00179731 Jy ! Component: 650 - total flux cleaned = 0.00188645 Jy ! Component: 700 - total flux cleaned = 0.00170973 Jy ! Component: 750 - total flux cleaned = 0.00175382 Jy ! Component: 800 - total flux cleaned = 0.00162401 Jy ! Component: 850 - total flux cleaned = 0.00162419 Jy ! Component: 900 - total flux cleaned = 0.00170921 Jy ! Component: 950 - total flux cleaned = 0.00162501 Jy ! Component: 1000 - total flux cleaned = 0.00170882 Jy ! Component: 1050 - total flux cleaned = 0.00166701 Jy ! Component: 1100 - total flux cleaned = 0.0017493 Jy ! Component: 1150 - total flux cleaned = 0.00170816 Jy ! Component: 1200 - total flux cleaned = 0.00158564 Jy ! Component: 1250 - total flux cleaned = 0.00166697 Jy ! Component: 1300 - total flux cleaned = 0.00178735 Jy ! Component: 1350 - total flux cleaned = 0.00182752 Jy ! Component: 1400 - total flux cleaned = 0.00198624 Jy ! Component: 1450 - total flux cleaned = 0.00178923 Jy ! Component: 1500 - total flux cleaned = 0.00202449 Jy ! Component: 1550 - total flux cleaned = 0.00210237 Jy ! Component: 1600 - total flux cleaned = 0.00221831 Jy ! Component: 1650 - total flux cleaned = 0.00218002 Jy ! Component: 1700 - total flux cleaned = 0.00240923 Jy ! Component: 1750 - total flux cleaned = 0.00233305 Jy ! Component: 1800 - total flux cleaned = 0.00244666 Jy ! Component: 1850 - total flux cleaned = 0.00252183 Jy ! Component: 1900 - total flux cleaned = 0.00263381 Jy ! Component: 1950 - total flux cleaned = 0.00259671 Jy ! Component: 2000 - total flux cleaned = 0.00274475 Jy ! Component: 2050 - total flux cleaned = 0.002855 Jy ! Component: 2100 - total flux cleaned = 0.00300179 Jy ! Component: 2150 - total flux cleaned = 0.00300153 Jy ! Component: 2200 - total flux cleaned = 0.00303772 Jy ! Component: 2250 - total flux cleaned = 0.00321846 Jy ! Component: 2300 - total flux cleaned = 0.00325447 Jy ! Component: 2350 - total flux cleaned = 0.0034342 Jy ! Component: 2400 - total flux cleaned = 0.0032917 Jy ! Component: 2450 - total flux cleaned = 0.00346942 Jy ! Component: 2500 - total flux cleaned = 0.00361079 Jy ! Component: 2550 - total flux cleaned = 0.00375188 Jy ! Component: 2600 - total flux cleaned = 0.00385688 Jy ! Component: 2650 - total flux cleaned = 0.00375226 Jy ! Component: 2700 - total flux cleaned = 0.0038565 Jy ! Component: 2750 - total flux cleaned = 0.00402957 Jy ! Component: 2800 - total flux cleaned = 0.00423635 Jy ! Component: 2850 - total flux cleaned = 0.00423627 Jy ! Component: 2900 - total flux cleaned = 0.00444139 Jy ! Component: 2950 - total flux cleaned = 0.0044415 Jy ! Component: 3000 - total flux cleaned = 0.00450942 Jy ! Component: 3050 - total flux cleaned = 0.00454327 Jy ! Component: 3100 - total flux cleaned = 0.00471148 Jy ! Component: 3150 - total flux cleaned = 0.00484567 Jy ! Component: 3200 - total flux cleaned = 0.00484568 Jy ! Component: 3250 - total flux cleaned = 0.0049454 Jy ! Component: 3300 - total flux cleaned = 0.00511092 Jy ! Component: 3350 - total flux cleaned = 0.00520988 Jy ! Component: 3400 - total flux cleaned = 0.00517687 Jy ! Component: 3450 - total flux cleaned = 0.00534062 Jy ! Component: 3500 - total flux cleaned = 0.0053407 Jy ! Component: 3550 - total flux cleaned = 0.00540557 Jy ! Component: 3600 - total flux cleaned = 0.00556751 Jy ! Component: 3650 - total flux cleaned = 0.00547073 Jy ! Component: 3700 - total flux cleaned = 0.00543859 Jy ! Component: 3750 - total flux cleaned = 0.00559877 Jy ! Component: 3800 - total flux cleaned = 0.00556707 Jy ! Component: 3850 - total flux cleaned = 0.00566262 Jy ! Component: 3900 - total flux cleaned = 0.00575783 Jy ! Component: 3950 - total flux cleaned = 0.00578924 Jy ! Component: 4000 - total flux cleaned = 0.00588371 Jy ! Component: 4050 - total flux cleaned = 0.00600926 Jy ! Total flux subtracted in 4096 components = 0.00585284 Jy ! Clean residual min=-0.001753 max=0.001688 Jy/beam ! Clean residual mean=0.000024 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 1.24304 Jy keep ! Adding 378 model components to the UV plane model. ! The established model now contains 679 components and 1.24304 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rdv76_uvs/J0336+3218_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6499 x 1.107 at -5.409 degrees (North through East) ! Clean map min=-0.0022832 max=0.49879 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J0336+3218_X_map.fits wmodel /scr/pima/rdv76_uvs/J0336+3218_X_map.mod ! Writing 679 model components to file: /scr/pima/rdv76_uvs/J0336+3218_X_map.mod wobs /scr/pima/rdv76_uvs/J0336+3218_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv76_uvs/J0336+3218_X_uvs.fits wwins /scr/pima/rdv76_uvs/J0336+3218_X_map.win ! wwins: Wrote 15 windows to /scr/pima/rdv76_uvs/J0336+3218_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.498791 invert ! Inverting map ! Your choice of large map pixels excluded 1.79% of the data. ! The x-axis pixel size should ideally be below 0.1848 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000520923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.313312 0.313312 0.626623 1.25325 2.50649 5.01299 10.026 20.0519 40.1039 80.2078 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.498 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 957.513 quit ! Quitting program ! Log file /scr/pima/rdv76_uvs/J0336+3218_X_dfm.log closed on Fri Jun 15 03:51:10 2018