! Started logfile: /scr/pima/rdv76_uvs/J0001+1914_S_dfm.log on Fri Jun 15 05:50:07 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv76_uvs/J0001+1914_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv76_uvs/J0001+1914_S_uva.fits
! AN table 1: 184 integrations on 45 of 45 possible baselines.
! AN table 2: 139 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.545557 visibilities/baseline/integration-bin.
! Found source: J0001+1914
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 34752 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0001+1914_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 737 telescope corrections were flagged in sub-array 1.
!  A total of 637 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 737 telescope corrections were flagged in sub-array 1.
!  A total of 637 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 737 telescope corrections were flagged in sub-array 1.
!  A total of 637 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 737 telescope corrections were flagged in sub-array 1.
!  A total of 637 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.068053Jy  sigma=12.238357
! Fit after  self-cal, rms=0.740850Jy  sigma=8.341155
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.991 mas, bmaj=4.338 mas, bpa=-5.699 degrees
! Estimated noise=0.667107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218508 Jy
! Component: 100  -  total flux cleaned = 0.269562 Jy
! Total flux subtracted in 100 components = 0.269562 Jy
! Clean residual min=-0.009971 max=0.020124 Jy/beam
! Clean residual mean=-0.000019 rms=0.002193 Jy/beam
! Combined flux in latest and established models = 0.269562 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.269562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196989Jy  sigma=1.963396
! Fit after  self-cal, rms=0.196972Jy  sigma=1.963205
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218519 Jy
! Component: 100  -  total flux cleaned = 0.0339459 Jy
! Total flux subtracted in 100 components = 0.0339459 Jy
! Clean residual min=-0.009578 max=0.008480 Jy/beam
! Clean residual mean=-0.000006 rms=0.001794 Jy/beam
! Combined flux in latest and established models = 0.303508 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 22 components and 0.303508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194380Jy  sigma=1.920746
! Fit after  self-cal, rms=0.194357Jy  sigma=1.920333
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.367 mas, bmaj=5.092 mas, bpa=-7.461 degrees
! Estimated noise=0.361245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00937689 Jy
! Component: 100  -  total flux cleaned = 0.0142976 Jy
! Component: 150  -  total flux cleaned = 0.0170107 Jy
! Component: 200  -  total flux cleaned = 0.0185098 Jy
! Total flux subtracted in 200 components = 0.0185098 Jy
! Clean residual min=-0.008251 max=0.006406 Jy/beam
! Clean residual mean=-0.000011 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 0.322017 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.322017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193982Jy  sigma=1.914176
! Fit after  self-cal, rms=0.193993Jy  sigma=1.914101
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.367 x 5.092 at -7.461 degrees (North through East)
! Clean map  min=-0.0078348  max=0.28656 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.87     KP        0.98     LA        1.04     
!   NL        1.06     NY        1.00     PT        0.99     SC        0.88     
!   WZ        1.09     ZC        1.03     
! 
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.89     KK        1.02     KP        1.02     
!   LA        1.01     MK        1.01     NL        1.05     NY        1.06     
!   OV        0.97     PT        0.99     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.86     KP        0.97     LA        1.04     
!   NL        1.05     NY        1.04     PT        1.04     SC        0.90     
!   WZ        1.08     ZC        1.04     
! 
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.86     KK        1.00     KP        1.01     
!   LA        1.03     MK        1.02     NL        1.06     NY        1.09     
!   OV        0.99     PT        1.00     SC        0.91     
! 
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.88     KP        1.01     LA        1.05     
!   NL        1.01     NY        1.03     PT        1.00     SC        0.89     
!   WZ        1.13     ZC        1.02     
! 
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        0.89     KK        1.05     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.07     NY        1.11     
!   OV        0.98     PT        1.02     SC        0.93     
! 
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.88     KP        1.05     LA        1.02     
!   NL        1.03     NY        1.06     PT        0.98     SC        0.89     
!   WZ        1.06     ZC        1.00     
! 
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.86     KK        1.07     KP        1.01     
!   LA        1.02     MK        1.00     NL        1.04     NY        1.06     
!   OV        1.01     PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.193993Jy  sigma=1.914101
! Fit after  self-cal, rms=0.194535Jy  sigma=1.896313
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.383 mas, bmaj=5.147 mas, bpa=-7.774 degrees
! Estimated noise=0.362682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00262401 Jy
! Component: 100  -  total flux cleaned = -0.00310078 Jy
! Component: 150  -  total flux cleaned = -0.00313787 Jy
! Component: 200  -  total flux cleaned = -0.00313548 Jy
! Total flux subtracted in 200 components = -0.00313548 Jy
! Clean residual min=-0.003321 max=0.002892 Jy/beam
! Clean residual mean=-0.000001 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.318882 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 0.318882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194491Jy  sigma=1.895962
! Fit after  self-cal, rms=0.194642Jy  sigma=1.895435
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194642Jy  sigma=1.895435
! Fit after  self-cal, rms=0.195322Jy  sigma=1.894440
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.388 mas, bmaj=5.156 mas, bpa=-7.755 degrees
! Estimated noise=0.362618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00164015 Jy
! Component: 100  -  total flux cleaned = -0.00185259 Jy
! Component: 150  -  total flux cleaned = -0.00188143 Jy
! Component: 200  -  total flux cleaned = -0.00190818 Jy
! Total flux subtracted in 200 components = -0.00190818 Jy
! Clean residual min=-0.003286 max=0.002771 Jy/beam
! Clean residual mean=-0.000000 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.316974 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 42 components and 0.316974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195301Jy  sigma=1.894295
! Fit after  self-cal, rms=0.195323Jy  sigma=1.894276
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.73743e-05 Jy
! Component: 100  -  total flux cleaned = -5.16996e-05 Jy
! Component: 150  -  total flux cleaned = -7.45561e-05 Jy
! Component: 200  -  total flux cleaned = -0.000115931 Jy
! Total flux subtracted in 200 components = -0.000115931 Jy
! Clean residual min=-0.003273 max=0.002764 Jy/beam
! Clean residual mean=-0.000000 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.316858 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 42 components and 0.316858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195315Jy  sigma=1.894233
! Fit after  self-cal, rms=0.195315Jy  sigma=1.894231
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195315Jy  sigma=1.894231
! Fit after  self-cal, rms=0.195458Jy  sigma=1.893222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.392 mas, bmaj=5.164 mas, bpa=-7.736 degrees
! Estimated noise=0.362485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105528 Jy
! Component: 100  -  total flux cleaned = -0.00122646 Jy
! Component: 150  -  total flux cleaned = -0.00128674 Jy
! Component: 200  -  total flux cleaned = -0.00130467 Jy
! Total flux subtracted in 200 components = -0.00130467 Jy
! Clean residual min=-0.003109 max=0.003101 Jy/beam
! Clean residual mean=0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.315553 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.315553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195449Jy  sigma=1.893158
! Fit after  self-cal, rms=0.195459Jy  sigma=1.893131
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (68, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232387 Jy
! Component: 100  -  total flux cleaned = 0.00250024 Jy
! Component: 150  -  total flux cleaned = 0.00263151 Jy
! Component: 200  -  total flux cleaned = 0.00270854 Jy
! Total flux subtracted in 200 components = 0.00270854 Jy
! Clean residual min=-0.003048 max=0.002634 Jy/beam
! Clean residual mean=0.000000 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.318262 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 0.318262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195416Jy  sigma=1.892673
! Fit after  self-cal, rms=0.195414Jy  sigma=1.892638
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195414Jy  sigma=1.892638
! Fit after  self-cal, rms=0.195469Jy  sigma=1.892562
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.975 mas, bmaj=9.855 mas, bpa=11.34 degrees
! Estimated noise=0.471863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125653 Jy
! Component: 100  -  total flux cleaned = 0.00152938 Jy
! Component: 150  -  total flux cleaned = 0.00162753 Jy
! Component: 200  -  total flux cleaned = 0.00171296 Jy
! Total flux subtracted in 200 components = 0.00171296 Jy
! Clean residual min=-0.003175 max=0.002970 Jy/beam
! Clean residual mean=0.000002 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.319975 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.319975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195467Jy  sigma=1.892541
! Fit after  self-cal, rms=0.195470Jy  sigma=1.892529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191092 Jy
! Component: 100  -  total flux cleaned = 0.000251337 Jy
! Component: 150  -  total flux cleaned = 0.000306969 Jy
! Component: 200  -  total flux cleaned = 0.000340828 Jy
! Total flux subtracted in 200 components = 0.000340828 Jy
! Clean residual min=-0.003155 max=0.002951 Jy/beam
! Clean residual mean=0.000002 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 0.320315 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.320315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195470Jy  sigma=1.892536
! Fit after  self-cal, rms=0.195469Jy  sigma=1.892532
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=5.167 mas, bpa=-7.73 degrees
! Estimated noise=0.362263 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.395 x 5.167 at -7.73 degrees (North through East)
! Clean map  min=-0.0027253  max=0.28677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.007 mas, bmaj=4.378 mas, bpa=-5.795 degrees
! Estimated noise=0.67993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219953 Jy
! Component: 100  -  total flux cleaned = 0.270717 Jy
! Component: 150  -  total flux cleaned = 0.291019 Jy
! Component: 200  -  total flux cleaned = 0.301026 Jy
! Total flux subtracted in 200 components = 0.301026 Jy
! Clean residual min=-0.006192 max=0.005838 Jy/beam
! Clean residual mean=-0.000003 rms=0.001393 Jy/beam
! Combined flux in latest and established models = 0.301026 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.301026 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=5.167 mas, bpa=-7.73 degrees
! Estimated noise=0.362263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716871 Jy
! Component: 100  -  total flux cleaned = 0.011025 Jy
! Component: 150  -  total flux cleaned = 0.013523 Jy
! Component: 200  -  total flux cleaned = 0.0146723 Jy
! Total flux subtracted in 200 components = 0.0146723 Jy
! Clean residual min=-0.002990 max=0.002591 Jy/beam
! Clean residual mean=-0.000001 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.315699 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 43 components and 0.315699 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.975 mas, bmaj=9.855 mas, bpa=11.34 degrees
! Estimated noise=0.471863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225424 Jy
! Component: 100  -  total flux cleaned = 0.00323751 Jy
! Component: 150  -  total flux cleaned = 0.0035934 Jy
! Component: 200  -  total flux cleaned = 0.00386049 Jy
! Total flux subtracted in 200 components = 0.00386049 Jy
! Clean residual min=-0.003187 max=0.002900 Jy/beam
! Clean residual mean=0.000002 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.319559 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225285 Jy
! Component: 100  -  total flux cleaned = 0.000415864 Jy
! Component: 150  -  total flux cleaned = 0.000577796 Jy
! Component: 200  -  total flux cleaned = 0.000672093 Jy
! Total flux subtracted in 200 components = 0.000672093 Jy
! Clean residual min=-0.003147 max=0.002920 Jy/beam
! Clean residual mean=0.000002 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.320231 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 61 components and 0.320231 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=5.167 mas, bpa=-7.73 degrees
! Estimated noise=0.362263 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000565184 Jy
! Component: 100  -  total flux cleaned = -0.000614976 Jy
! Component: 150  -  total flux cleaned = -0.000696529 Jy
! Component: 200  -  total flux cleaned = -0.000802599 Jy
! Total flux subtracted in 200 components = -0.000802599 Jy
! Clean residual min=-0.002916 max=0.002646 Jy/beam
! Clean residual mean=0.000000 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.319429 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 69 components and 0.319429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195453Jy  sigma=1.892404
! Fit after  self-cal, rms=0.195446Jy  sigma=1.892364
wmodel J0001+1914_S_map.mod
! Writing 69 model components to file: J0001+1914_S_map.mod
wobs   J0001+1914_S_uvs.fits
! Writing UV FITS file: J0001+1914_S_uvs.fits
wwins  J0001+1914_S_map.win
! wwins: Wrote 2 windows to J0001+1914_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101908 Jy
! Component: 100  -  total flux cleaned = -0.00169955 Jy
! Component: 150  -  total flux cleaned = -0.00197846 Jy
! Component: 200  -  total flux cleaned = -0.00215829 Jy
! Component: 250  -  total flux cleaned = -0.0022464 Jy
! Component: 300  -  total flux cleaned = -0.0024184 Jy
! Component: 350  -  total flux cleaned = -0.00246002 Jy
! Component: 400  -  total flux cleaned = -0.00270892 Jy
! Component: 450  -  total flux cleaned = -0.00270878 Jy
! Component: 500  -  total flux cleaned = -0.00278932 Jy
! Component: 550  -  total flux cleaned = -0.00286843 Jy
! Component: 600  -  total flux cleaned = -0.00290701 Jy
! Component: 650  -  total flux cleaned = -0.00282979 Jy
! Component: 700  -  total flux cleaned = -0.00290674 Jy
! Component: 750  -  total flux cleaned = -0.00298249 Jy
! Component: 800  -  total flux cleaned = -0.0030574 Jy
! Component: 850  -  total flux cleaned = -0.00309467 Jy
! Component: 900  -  total flux cleaned = -0.00324065 Jy
! Component: 950  -  total flux cleaned = -0.00331245 Jy
! Component: 1000  -  total flux cleaned = -0.00334778 Jy
! Component: 1050  -  total flux cleaned = -0.00352472 Jy
! Component: 1100  -  total flux cleaned = -0.00362972 Jy
! Component: 1150  -  total flux cleaned = -0.00373393 Jy
! Component: 1200  -  total flux cleaned = -0.00387101 Jy
! Component: 1250  -  total flux cleaned = -0.00393948 Jy
! Component: 1300  -  total flux cleaned = -0.00404067 Jy
! Component: 1350  -  total flux cleaned = -0.00417496 Jy
! Component: 1400  -  total flux cleaned = -0.00424144 Jy
! Component: 1450  -  total flux cleaned = -0.00440652 Jy
! Component: 1500  -  total flux cleaned = -0.00440674 Jy
! Component: 1550  -  total flux cleaned = -0.00469961 Jy
! Component: 1600  -  total flux cleaned = -0.00482854 Jy
! Component: 1650  -  total flux cleaned = -0.00492448 Jy
! Component: 1700  -  total flux cleaned = -0.00498809 Jy
! Component: 1750  -  total flux cleaned = -0.00505099 Jy
! Component: 1800  -  total flux cleaned = -0.0050509 Jy
! Component: 1850  -  total flux cleaned = -0.00511331 Jy
! Component: 1900  -  total flux cleaned = -0.00529902 Jy
! Component: 1950  -  total flux cleaned = -0.00523789 Jy
! Component: 2000  -  total flux cleaned = -0.00542137 Jy
! Component: 2050  -  total flux cleaned = -0.00557288 Jy
! Component: 2100  -  total flux cleaned = -0.00557265 Jy
! Component: 2150  -  total flux cleaned = -0.00569233 Jy
! Component: 2200  -  total flux cleaned = -0.00575191 Jy
! Component: 2250  -  total flux cleaned = -0.00581074 Jy
! Component: 2300  -  total flux cleaned = -0.00583995 Jy
! Component: 2350  -  total flux cleaned = -0.00595708 Jy
! Component: 2400  -  total flux cleaned = -0.00598594 Jy
! Component: 2450  -  total flux cleaned = -0.00607262 Jy
! Component: 2500  -  total flux cleaned = -0.00613012 Jy
! Component: 2550  -  total flux cleaned = -0.00630141 Jy
! Component: 2600  -  total flux cleaned = -0.00632989 Jy
! Component: 2650  -  total flux cleaned = -0.0064711 Jy
! Component: 2700  -  total flux cleaned = -0.00644303 Jy
! Component: 2750  -  total flux cleaned = -0.00649901 Jy
! Component: 2800  -  total flux cleaned = -0.00661034 Jy
! Component: 2850  -  total flux cleaned = -0.00663809 Jy
! Component: 2900  -  total flux cleaned = -0.00680315 Jy
! Component: 2950  -  total flux cleaned = -0.00683038 Jy
! Component: 3000  -  total flux cleaned = -0.00699392 Jy
! Component: 3050  -  total flux cleaned = -0.00702078 Jy
! Component: 3100  -  total flux cleaned = -0.00704781 Jy
! Component: 3150  -  total flux cleaned = -0.00704812 Jy
! Component: 3200  -  total flux cleaned = -0.00723506 Jy
! Component: 3250  -  total flux cleaned = -0.00720826 Jy
! Component: 3300  -  total flux cleaned = -0.00739355 Jy
! Component: 3350  -  total flux cleaned = -0.00749863 Jy
! Component: 3400  -  total flux cleaned = -0.00747249 Jy
! Component: 3450  -  total flux cleaned = -0.0076288 Jy
! Component: 3500  -  total flux cleaned = -0.00765458 Jy
! Component: 3550  -  total flux cleaned = -0.00768042 Jy
! Component: 3600  -  total flux cleaned = -0.00768045 Jy
! Component: 3650  -  total flux cleaned = -0.00793625 Jy
! Component: 3700  -  total flux cleaned = -0.0079107 Jy
! Component: 3750  -  total flux cleaned = -0.00816428 Jy
! Component: 3800  -  total flux cleaned = -0.00806333 Jy
! Component: 3850  -  total flux cleaned = -0.00816369 Jy
! Component: 3900  -  total flux cleaned = -0.00831387 Jy
! Component: 3950  -  total flux cleaned = -0.00853794 Jy
! Component: 4000  -  total flux cleaned = -0.008513 Jy
! Component: 4050  -  total flux cleaned = -0.00856235 Jy
! Total flux subtracted in 4096 components = -0.00873444 Jy
! Clean residual min=-0.001466 max=0.001542 Jy/beam
! Clean residual mean=-0.000000 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.310694 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 371 components and 0.310694 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv76_uvs/J0001+1914_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.395 x 5.167 at -7.73 degrees (North through East)
! Clean map  min=-0.0022833  max=0.28666 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv76_uvs/J0001+1914_S_map.fits
wmodel /scr/pima/rdv76_uvs/J0001+1914_S_map.mod
! Writing 371 model components to file: /scr/pima/rdv76_uvs/J0001+1914_S_map.mod
wobs   /scr/pima/rdv76_uvs/J0001+1914_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv76_uvs/J0001+1914_S_uvs.fits
wwins  /scr/pima/rdv76_uvs/J0001+1914_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv76_uvs/J0001+1914_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.286663 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000424033 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.44376 0.44376 0.88752 1.77504 3.55008 7.10016 14.2003 28.4007 56.8013
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.286 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  676.04 
quit
! Quitting program
! Log file /scr/pima/rdv76_uvs/J0001+1914_S_dfm.log closed on Fri Jun 15 05:50:12 2018