! Started logfile: J2212+2355_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:48:04 2017 obs J2212+2355_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J2212+2355_X_2009_05_13_pus_uva.fits ! AN table 1: 164 integrations on 120 of 120 possible baselines. ! AN table 2: 30 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.151589 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2212+2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 14116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2212+2355_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.499402Jy sigma=0.003983 ! Fit after self-cal, rms=0.334396Jy sigma=0.002617 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5321 mas, bmaj=0.9021 mas, bpa=-8.792 degrees ! Estimated noise=1017.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.551468 Jy ! Component: 100 - total flux cleaned = 0.685981 Jy ! Total flux subtracted in 100 components = 0.685981 Jy ! Clean residual min=-0.012439 max=0.054165 Jy/beam ! Clean residual mean=0.000094 rms=0.003648 Jy/beam ! Combined flux in latest and established models = 0.685981 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.685981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195139Jy sigma=0.001572 ! Fit after self-cal, rms=0.195170Jy sigma=0.001572 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573413 Jy ! Component: 100 - total flux cleaned = 0.0859003 Jy ! Total flux subtracted in 100 components = 0.0859003 Jy ! Clean residual min=-0.011788 max=0.030598 Jy/beam ! Clean residual mean=-0.000002 rms=0.002622 Jy/beam ! Combined flux in latest and established models = 0.771881 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.771881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173321Jy sigma=0.001315 ! Fit after self-cal, rms=0.173329Jy sigma=0.001315 ! Inverting map ! Added new window around map position (0.9, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266092 Jy ! Component: 100 - total flux cleaned = 0.0415558 Jy ! Total flux subtracted in 100 components = 0.0415558 Jy ! Clean residual min=-0.010332 max=0.014057 Jy/beam ! Clean residual mean=-0.000051 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.813437 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.813437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167960Jy sigma=0.001251 ! Fit after self-cal, rms=0.167555Jy sigma=0.001247 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6392 mas, bmaj=1.086 mas, bpa=-5.028 degrees ! Estimated noise=710.663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019 Jy ! Component: 100 - total flux cleaned = 0.0300215 Jy ! Component: 150 - total flux cleaned = 0.0371059 Jy ! Component: 200 - total flux cleaned = 0.0417524 Jy ! Total flux subtracted in 200 components = 0.0417524 Jy ! Clean residual min=-0.008968 max=0.007552 Jy/beam ! Clean residual mean=-0.000348 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.85519 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.85519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165562Jy sigma=0.001220 ! Fit after self-cal, rms=0.165452Jy sigma=0.001219 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.07 HO 0.78 ! KK 1.01 KP 1.01 LA 1.02 MK 1.00 ! NL 0.96 NY 1.00 OV 0.96 PT 0.98 ! SC 0.99 TS 0.95 WZ 1.03 KB 1.05 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.08 HO 0.78 ! KK 1.01 KP 0.96 LA 1.00 MK 0.99 ! NL 0.95 NY 0.97 OV 0.94 PT 1.02 ! SC 1.00 TS 0.95 WZ 1.05 KB 1.05 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.09 HO 0.85 ! KK 1.02 KP 0.99 LA 1.04 MK 0.97 ! NL 0.99 NY 1.03 OV 0.97 PT 1.03 ! SC 1.04 TS 0.96 WZ 1.07 KB 1.03 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.09 HO 0.88 ! KK 1.07 KP 0.99 LA 1.02 MK 0.98 ! NL 0.99 NY 0.99 OV 0.98 PT 1.02 ! SC 1.00 TS 0.98 WZ 1.07 KB 1.05 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Fit before self-cal, rms=0.165452Jy sigma=0.001219 ! Fit after self-cal, rms=0.156451Jy sigma=0.001157 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6411 mas, bmaj=1.067 mas, bpa=-6.257 degrees ! Estimated noise=710.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00267568 Jy ! Component: 100 - total flux cleaned = -0.00252941 Jy ! Component: 150 - total flux cleaned = -0.00254039 Jy ! Component: 200 - total flux cleaned = -0.00254618 Jy ! Total flux subtracted in 200 components = -0.00254618 Jy ! Clean residual min=-0.006487 max=0.004990 Jy/beam ! Clean residual mean=-0.000296 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.852643 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.852643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156063Jy sigma=0.001155 ! Fit after self-cal, rms=0.156091Jy sigma=0.001155 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156091Jy sigma=0.001155 ! Fit after self-cal, rms=0.153910Jy sigma=0.001125 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6402 mas, bmaj=1.068 mas, bpa=-6.393 degrees ! Estimated noise=710.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129339 Jy ! Component: 100 - total flux cleaned = 0.00119328 Jy ! Component: 150 - total flux cleaned = 0.00100319 Jy ! Component: 200 - total flux cleaned = 0.000917864 Jy ! Total flux subtracted in 200 components = 0.000917864 Jy ! Clean residual min=-0.004493 max=0.003811 Jy/beam ! Clean residual mean=-0.000007 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.853561 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.853561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153721Jy sigma=0.001124 ! Fit after self-cal, rms=0.153739Jy sigma=0.001124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203561 Jy ! Component: 100 - total flux cleaned = 4.10942e-05 Jy ! Component: 150 - total flux cleaned = -3.91542e-05 Jy ! Component: 200 - total flux cleaned = -0.00018999 Jy ! Total flux subtracted in 200 components = -0.00018999 Jy ! Clean residual min=-0.004348 max=0.003713 Jy/beam ! Clean residual mean=-0.000007 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.853371 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.853371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153621Jy sigma=0.001123 ! Fit after self-cal, rms=0.153619Jy sigma=0.001123 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153619Jy sigma=0.001123 ! Fit after self-cal, rms=0.153408Jy sigma=0.001122 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6398 mas, bmaj=1.067 mas, bpa=-6.57 degrees ! Estimated noise=710.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866792 Jy ! Component: 100 - total flux cleaned = 0.000781 Jy ! Component: 150 - total flux cleaned = 0.000704351 Jy ! Component: 200 - total flux cleaned = 0.000628834 Jy ! Total flux subtracted in 200 components = 0.000628834 Jy ! Clean residual min=-0.004231 max=0.003669 Jy/beam ! Clean residual mean=0.000018 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.854 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153287Jy sigma=0.001122 ! Fit after self-cal, rms=0.153287Jy sigma=0.001122 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.76962e-05 Jy ! Component: 100 - total flux cleaned = -0.000136256 Jy ! Component: 150 - total flux cleaned = -0.000205059 Jy ! Component: 200 - total flux cleaned = -0.000268597 Jy ! Total flux subtracted in 200 components = -0.000268597 Jy ! Clean residual min=-0.004141 max=0.003654 Jy/beam ! Clean residual mean=0.000019 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.853731 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.853731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153204Jy sigma=0.001122 ! Fit after self-cal, rms=0.153204Jy sigma=0.001122 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153204Jy sigma=0.001122 ! Fit after self-cal, rms=0.153028Jy sigma=0.001121 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=2.682 mas, bpa=9.462 degrees ! Estimated noise=985.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.50018e-05 Jy ! Component: 100 - total flux cleaned = 7.25878e-05 Jy ! Component: 150 - total flux cleaned = 8.57207e-05 Jy ! Component: 200 - total flux cleaned = 9.61149e-05 Jy ! Total flux subtracted in 200 components = 9.61149e-05 Jy ! Clean residual min=-0.003696 max=0.004143 Jy/beam ! Clean residual mean=0.000094 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.853828 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.853828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153023Jy sigma=0.001121 ! Fit after self-cal, rms=0.153019Jy sigma=0.001121 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.78617e-05 Jy ! Component: 100 - total flux cleaned = -1.21247e-05 Jy ! Component: 150 - total flux cleaned = -9.8413e-07 Jy ! Component: 200 - total flux cleaned = 8.02826e-06 Jy ! Total flux subtracted in 200 components = 8.02826e-06 Jy ! Clean residual min=-0.003699 max=0.004140 Jy/beam ! Clean residual mean=0.000094 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.853836 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.853836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153019Jy sigma=0.001121 ! Fit after self-cal, rms=0.153017Jy sigma=0.001121 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6395 mas, bmaj=1.065 mas, bpa=-6.715 degrees ! Estimated noise=711.063 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6395 x 1.065 at -6.715 degrees (North through East) ! Clean map min=-0.0039811 max=0.71974 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153017Jy sigma=0.001121 ! Fit after self-cal, rms=0.147639Jy sigma=0.001054 ! Inverting map and beam ! Estimated beam: bmin=0.6394 mas, bmaj=1.066 mas, bpa=-6.684 degrees ! Estimated noise=710.954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244445 Jy ! Component: 100 - total flux cleaned = 0.000244072 Jy ! Component: 150 - total flux cleaned = 0.000182014 Jy ! Component: 200 - total flux cleaned = 6.32105e-05 Jy ! Total flux subtracted in 200 components = 6.32105e-05 Jy ! Clean residual min=-0.004171 max=0.003487 Jy/beam ! Clean residual mean=0.000030 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.853899 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.853899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147559Jy sigma=0.001054 ! Fit after self-cal, rms=0.147561Jy sigma=0.001054 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.91329e-05 Jy ! Component: 100 - total flux cleaned = -0.000115217 Jy ! Component: 150 - total flux cleaned = -0.000171902 Jy ! Component: 200 - total flux cleaned = -0.000171032 Jy ! Total flux subtracted in 200 components = -0.000171032 Jy ! Clean residual min=-0.004107 max=0.003477 Jy/beam ! Clean residual mean=0.000031 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.853728 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.853728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147502Jy sigma=0.001054 ! Fit after self-cal, rms=0.147502Jy sigma=0.001054 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147502Jy sigma=0.001054 ! Fit after self-cal, rms=0.147332Jy sigma=0.001054 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5313 mas, bmaj=0.8839 mas, bpa=-10.86 degrees ! Estimated noise=1009.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.548631 Jy ! Component: 100 - total flux cleaned = 0.689335 Jy ! Component: 150 - total flux cleaned = 0.75039 Jy ! Component: 200 - total flux cleaned = 0.785299 Jy ! Total flux subtracted in 200 components = 0.785299 Jy ! Clean residual min=-0.006160 max=0.017965 Jy/beam ! Clean residual mean=0.000081 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.785299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.785299 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6391 mas, bmaj=1.065 mas, bpa=-6.795 degrees ! Estimated noise=711.149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297669 Jy ! Component: 100 - total flux cleaned = 0.0456091 Jy ! Component: 150 - total flux cleaned = 0.0545956 Jy ! Component: 200 - total flux cleaned = 0.0601074 Jy ! Total flux subtracted in 200 components = 0.0601074 Jy ! Clean residual min=-0.003688 max=0.003930 Jy/beam ! Clean residual mean=0.000072 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.845406 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.845406 Jy ! Inverting map ! Added new window around map position (0, 1.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308833 Jy ! Component: 100 - total flux cleaned = 0.00402617 Jy ! Component: 150 - total flux cleaned = 0.00481999 Jy ! Component: 200 - total flux cleaned = 0.00525704 Jy ! Total flux subtracted in 200 components = 0.00525704 Jy ! Clean residual min=-0.003882 max=0.003512 Jy/beam ! Clean residual mean=0.000053 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.850663 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.850663 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=2.683 mas, bpa=9.212 degrees ! Estimated noise=985.493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173035 Jy ! Component: 100 - total flux cleaned = 0.00221217 Jy ! Component: 150 - total flux cleaned = 0.00227801 Jy ! Component: 200 - total flux cleaned = 0.00234924 Jy ! Total flux subtracted in 200 components = 0.00234924 Jy ! Clean residual min=-0.003503 max=0.004196 Jy/beam ! Clean residual mean=0.000130 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.853013 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.5874e-05 Jy ! Component: 100 - total flux cleaned = 9.01449e-05 Jy ! Component: 150 - total flux cleaned = 0.000110176 Jy ! Component: 200 - total flux cleaned = 0.000135936 Jy ! Total flux subtracted in 200 components = 0.000135936 Jy ! Clean residual min=-0.003498 max=0.004189 Jy/beam ! Clean residual mean=0.000129 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.853148 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.853148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6391 mas, bmaj=1.065 mas, bpa=-6.795 degrees ! Estimated noise=711.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000907103 Jy ! Component: 100 - total flux cleaned = -0.000903043 Jy ! Component: 150 - total flux cleaned = -0.00090121 Jy ! Component: 200 - total flux cleaned = -0.000898893 Jy ! Total flux subtracted in 200 components = -0.000898893 Jy ! Clean residual min=-0.003943 max=0.003505 Jy/beam ! Clean residual mean=0.000048 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.85225 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.85225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147154Jy sigma=0.001053 ! Fit after self-cal, rms=0.147152Jy sigma=0.001053 wmodel J2212+2355_X_2009_05_13_pus_map.mod ! Writing 50 model components to file: J2212+2355_X_2009_05_13_pus_map.mod wobs J2212+2355_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J2212+2355_X_2009_05_13_pus_uvs.fits wwins J2212+2355_X_2009_05_13_pus_map.win ! wwins: Wrote 3 windows to J2212+2355_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191676 Jy ! Component: 100 - total flux cleaned = 0.000296912 Jy ! Component: 150 - total flux cleaned = 0.00111051 Jy ! Component: 200 - total flux cleaned = 0.0019506 Jy ! Component: 250 - total flux cleaned = 0.00271127 Jy ! Component: 300 - total flux cleaned = 0.00345372 Jy ! Component: 350 - total flux cleaned = 0.00407693 Jy ! Component: 400 - total flux cleaned = 0.00473879 Jy ! Component: 450 - total flux cleaned = 0.0053383 Jy ! Component: 500 - total flux cleaned = 0.00582999 Jy ! Component: 550 - total flux cleaned = 0.00636184 Jy ! Component: 600 - total flux cleaned = 0.00674245 Jy ! Component: 650 - total flux cleaned = 0.00702379 Jy ! Component: 700 - total flux cleaned = 0.00730231 Jy ! Component: 750 - total flux cleaned = 0.00757752 Jy ! Component: 800 - total flux cleaned = 0.00775894 Jy ! Component: 850 - total flux cleaned = 0.00793882 Jy ! Component: 900 - total flux cleaned = 0.00820568 Jy ! Component: 950 - total flux cleaned = 0.00838203 Jy ! Component: 1000 - total flux cleaned = 0.00855638 Jy ! Component: 1050 - total flux cleaned = 0.00868614 Jy ! Component: 1100 - total flux cleaned = 0.00894274 Jy ! Component: 1150 - total flux cleaned = 0.00898523 Jy ! Component: 1200 - total flux cleaned = 0.00906968 Jy ! Component: 1250 - total flux cleaned = 0.00940304 Jy ! Component: 1300 - total flux cleaned = 0.00944431 Jy ! Component: 1350 - total flux cleaned = 0.00956715 Jy ! Component: 1400 - total flux cleaned = 0.0097298 Jy ! Component: 1450 - total flux cleaned = 0.00985062 Jy ! Component: 1500 - total flux cleaned = 0.00985056 Jy ! Component: 1550 - total flux cleaned = 0.00989067 Jy ! Component: 1600 - total flux cleaned = 0.0100878 Jy ! Component: 1650 - total flux cleaned = 0.0100878 Jy ! Component: 1700 - total flux cleaned = 0.0100881 Jy ! Component: 1750 - total flux cleaned = 0.0100879 Jy ! Component: 1800 - total flux cleaned = 0.0100497 Jy ! Component: 1850 - total flux cleaned = 0.0101261 Jy ! Component: 1900 - total flux cleaned = 0.0101263 Jy ! Component: 1950 - total flux cleaned = 0.0101265 Jy ! Component: 2000 - total flux cleaned = 0.0101638 Jy ! Component: 2050 - total flux cleaned = 0.0102013 Jy ! Component: 2100 - total flux cleaned = 0.0103129 Jy ! Component: 2150 - total flux cleaned = 0.0102392 Jy ! Component: 2200 - total flux cleaned = 0.0102026 Jy ! Component: 2250 - total flux cleaned = 0.0102392 Jy ! Component: 2300 - total flux cleaned = 0.0103117 Jy ! Component: 2350 - total flux cleaned = 0.0102757 Jy ! Component: 2400 - total flux cleaned = 0.0103836 Jy ! Component: 2450 - total flux cleaned = 0.0102763 Jy ! Component: 2500 - total flux cleaned = 0.0103828 Jy ! Component: 2550 - total flux cleaned = 0.0103827 Jy ! Component: 2600 - total flux cleaned = 0.0103476 Jy ! Component: 2650 - total flux cleaned = 0.0103124 Jy ! Component: 2700 - total flux cleaned = 0.0102429 Jy ! Component: 2750 - total flux cleaned = 0.0104511 Jy ! Component: 2800 - total flux cleaned = 0.0104165 Jy ! Component: 2850 - total flux cleaned = 0.010485 Jy ! Component: 2900 - total flux cleaned = 0.0103822 Jy ! Component: 2950 - total flux cleaned = 0.0104504 Jy ! Component: 3000 - total flux cleaned = 0.0103826 Jy ! Component: 3050 - total flux cleaned = 0.0103826 Jy ! Component: 3100 - total flux cleaned = 0.0103156 Jy ! Component: 3150 - total flux cleaned = 0.0103156 Jy ! Component: 3200 - total flux cleaned = 0.0103155 Jy ! Component: 3250 - total flux cleaned = 0.0103155 Jy ! Component: 3300 - total flux cleaned = 0.0103154 Jy ! Component: 3350 - total flux cleaned = 0.0103483 Jy ! Component: 3400 - total flux cleaned = 0.0103154 Jy ! Component: 3450 - total flux cleaned = 0.0102176 Jy ! Component: 3500 - total flux cleaned = 0.0102174 Jy ! Component: 3550 - total flux cleaned = 0.0102496 Jy ! Component: 3600 - total flux cleaned = 0.0102496 Jy ! Component: 3650 - total flux cleaned = 0.0101535 Jy ! Component: 3700 - total flux cleaned = 0.0101854 Jy ! Component: 3750 - total flux cleaned = 0.0101854 Jy ! Component: 3800 - total flux cleaned = 0.0101538 Jy ! Component: 3850 - total flux cleaned = 0.0100906 Jy ! Component: 3900 - total flux cleaned = 0.0101221 Jy ! Component: 3950 - total flux cleaned = 0.0100908 Jy ! Component: 4000 - total flux cleaned = 0.0100596 Jy ! Component: 4050 - total flux cleaned = 0.00999731 Jy ! Total flux subtracted in 4096 components = 0.00999721 Jy ! Clean residual min=-0.001954 max=0.002002 Jy/beam ! Clean residual mean=0.000009 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.862247 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 365 components and 0.862247 Jy ![Exited script file: muppet] wmap "J2212+2355_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6391 x 1.065 at -6.795 degrees (North through East) ! Clean map min=-0.003373 max=0.72099 Jy/beam ! Writing clean map to FITS file: J2212+2355_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.720992 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000553954 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.230497 0.230497 0.460993 0.921987 1.84397 3.68795 7.37589 14.7518 29.5036 59.0072 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.72 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6391 x 1.065 at -6.795 degrees (North through East) ! Clean map min=-0.003373 max=0.72099 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212+2355_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:48:10 2017