! Started logfile: J2212+2355_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:40:58 2017 obs J2212+2355_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J2212+2355_S_2009_05_13_pus_uva.fits ! AN table 1: 164 integrations on 120 of 120 possible baselines. ! AN table 2: 30 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.151589 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2212+2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 14116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2212+2355_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! A total of 456 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.535241Jy sigma=0.003833 ! Fit after self-cal, rms=0.417990Jy sigma=0.003018 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2 mas, bmaj=3.511 mas, bpa=-8.353 degrees ! Estimated noise=1124.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.480917 Jy ! Component: 100 - total flux cleaned = 0.59395 Jy ! Total flux subtracted in 100 components = 0.59395 Jy ! Clean residual min=-0.010417 max=0.044616 Jy/beam ! Clean residual mean=-0.000004 rms=0.002784 Jy/beam ! Combined flux in latest and established models = 0.59395 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.59395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203389Jy sigma=0.001328 ! Fit after self-cal, rms=0.203303Jy sigma=0.001328 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489799 Jy ! Component: 100 - total flux cleaned = 0.0740521 Jy ! Total flux subtracted in 100 components = 0.0740521 Jy ! Clean residual min=-0.009009 max=0.012428 Jy/beam ! Clean residual mean=-0.000070 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 0.668002 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.668002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189338Jy sigma=0.001186 ! Fit after self-cal, rms=0.189220Jy sigma=0.001185 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016156 Jy ! Component: 100 - total flux cleaned = 0.0263773 Jy ! Total flux subtracted in 100 components = 0.0263773 Jy ! Clean residual min=-0.008492 max=0.008809 Jy/beam ! Clean residual mean=-0.000093 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.694379 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.694379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187507Jy sigma=0.001166 ! Fit after self-cal, rms=0.187505Jy sigma=0.001166 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=4.072 mas, bpa=-6.562 degrees ! Estimated noise=820.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01076 Jy ! Component: 100 - total flux cleaned = 0.015642 Jy ! Component: 150 - total flux cleaned = 0.0171987 Jy ! Component: 200 - total flux cleaned = 0.0180298 Jy ! Total flux subtracted in 200 components = 0.0180298 Jy ! Clean residual min=-0.006222 max=0.005292 Jy/beam ! Clean residual mean=-0.000455 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.712409 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.712409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186795Jy sigma=0.001159 ! Fit after self-cal, rms=0.186767Jy sigma=0.001159 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.02 HO 0.90 ! KK 1.01 KP 1.01 LA 0.95 MK 1.00 ! NL 1.00 NY 1.02 OV 1.00 PT 1.00 ! SC 0.96 TS 1.04 WZ 0.99 KB 1.09 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.00 HO 0.91 ! KK 1.09 KP 1.02 LA 1.00 MK 1.00 ! NL 1.04 NY 0.98 OV 1.00 PT 0.99 ! SC 1.01 TS 1.00 WZ 0.98 KB 1.12 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.99 HO 0.95 ! KK 0.99 KP 1.03 LA 0.99 MK 1.03 ! NL 0.99 NY 1.00 OV 1.05 PT 1.00 ! SC 0.98 TS 1.05 WZ 1.02 KB 1.11 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.95 HO 0.84 ! KK 1.01 KP 0.98 LA 1.00 MK 1.00 ! NL 1.00 NY 1.01 OV 0.97 PT 1.00 ! SC 0.97 TS 1.03 WZ 1.02 KB 1.02 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Fit before self-cal, rms=0.186767Jy sigma=0.001159 ! Fit after self-cal, rms=0.181287Jy sigma=0.001134 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=4.04 mas, bpa=-7.714 degrees ! Estimated noise=821.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172038 Jy ! Component: 100 - total flux cleaned = -0.00144388 Jy ! Component: 150 - total flux cleaned = -0.00120222 Jy ! Component: 200 - total flux cleaned = -0.00110074 Jy ! Total flux subtracted in 200 components = -0.00110074 Jy ! Clean residual min=-0.005251 max=0.005052 Jy/beam ! Clean residual mean=-0.000217 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.711308 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.711308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181041Jy sigma=0.001133 ! Fit after self-cal, rms=0.181001Jy sigma=0.001133 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181001Jy sigma=0.001133 ! Fit after self-cal, rms=0.181932Jy sigma=0.001121 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=4.049 mas, bpa=-7.949 degrees ! Estimated noise=820.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112387 Jy ! Component: 100 - total flux cleaned = 0.00122914 Jy ! Component: 150 - total flux cleaned = 0.00122664 Jy ! Component: 200 - total flux cleaned = 0.00131492 Jy ! Total flux subtracted in 200 components = 0.00131492 Jy ! Clean residual min=-0.004299 max=0.003928 Jy/beam ! Clean residual mean=-0.000094 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.712623 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.712623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181786Jy sigma=0.001120 ! Fit after self-cal, rms=0.181811Jy sigma=0.001120 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597021 Jy ! Component: 100 - total flux cleaned = 0.000597119 Jy ! Component: 150 - total flux cleaned = 0.00059887 Jy ! Component: 200 - total flux cleaned = 0.000672506 Jy ! Total flux subtracted in 200 components = 0.000672506 Jy ! Clean residual min=-0.004342 max=0.003931 Jy/beam ! Clean residual mean=-0.000096 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.713296 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.713296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181721Jy sigma=0.001119 ! Fit after self-cal, rms=0.181714Jy sigma=0.001119 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181714Jy sigma=0.001119 ! Fit after self-cal, rms=0.181791Jy sigma=0.001119 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=4.044 mas, bpa=-8.15 degrees ! Estimated noise=821.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000949735 Jy ! Component: 100 - total flux cleaned = 0.000867282 Jy ! Component: 150 - total flux cleaned = 0.000941774 Jy ! Component: 200 - total flux cleaned = 0.000937291 Jy ! Total flux subtracted in 200 components = 0.000937291 Jy ! Clean residual min=-0.004158 max=0.004315 Jy/beam ! Clean residual mean=-0.000053 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.714233 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.714233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181703Jy sigma=0.001118 ! Fit after self-cal, rms=0.181695Jy sigma=0.001118 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367827 Jy ! Component: 100 - total flux cleaned = 0.0047022 Jy ! Component: 150 - total flux cleaned = 0.0051421 Jy ! Component: 200 - total flux cleaned = 0.00548353 Jy ! Total flux subtracted in 200 components = 0.00548353 Jy ! Clean residual min=-0.004136 max=0.003462 Jy/beam ! Clean residual mean=-0.000069 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.719716 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 0.719717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181575Jy sigma=0.001117 ! Fit after self-cal, rms=0.181563Jy sigma=0.001117 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181563Jy sigma=0.001117 ! Fit after self-cal, rms=0.181574Jy sigma=0.001117 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.811 mas, bmaj=9.362 mas, bpa=7.445 degrees ! Estimated noise=1115.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203565 Jy ! Component: 100 - total flux cleaned = 0.00242296 Jy ! Component: 150 - total flux cleaned = 0.00254838 Jy ! Component: 200 - total flux cleaned = 0.00265031 Jy ! Total flux subtracted in 200 components = 0.00265031 Jy ! Clean residual min=-0.004274 max=0.004499 Jy/beam ! Clean residual mean=-0.000145 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.722367 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.722367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181575Jy sigma=0.001117 ! Fit after self-cal, rms=0.181569Jy sigma=0.001117 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245016 Jy ! Component: 100 - total flux cleaned = 0.000300097 Jy ! Component: 150 - total flux cleaned = 0.000344767 Jy ! Component: 200 - total flux cleaned = 0.000344387 Jy ! Total flux subtracted in 200 components = 0.000344387 Jy ! Clean residual min=-0.004243 max=0.004510 Jy/beam ! Clean residual mean=-0.000147 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.722711 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.722711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181576Jy sigma=0.001117 ! Fit after self-cal, rms=0.181574Jy sigma=0.001117 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=4.041 mas, bpa=-8.303 degrees ! Estimated noise=821.984 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.422 x 4.041 at -8.303 degrees (North through East) ! Clean map min=-0.0039065 max=0.62366 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181574Jy sigma=0.001117 ! Fit after self-cal, rms=0.175943Jy sigma=0.001053 ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=4.043 mas, bpa=-8.293 degrees ! Estimated noise=821.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647588 Jy ! Component: 100 - total flux cleaned = 0.000345506 Jy ! Component: 150 - total flux cleaned = 0.000277582 Jy ! Component: 200 - total flux cleaned = 0.000212685 Jy ! Total flux subtracted in 200 components = 0.000212685 Jy ! Clean residual min=-0.004361 max=0.003453 Jy/beam ! Clean residual mean=-0.000047 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.722924 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.722924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175863Jy sigma=0.001053 ! Fit after self-cal, rms=0.175858Jy sigma=0.001053 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.50395e-05 Jy ! Component: 100 - total flux cleaned = 0.000158813 Jy ! Component: 150 - total flux cleaned = 0.000158974 Jy ! Component: 200 - total flux cleaned = 0.000215922 Jy ! Total flux subtracted in 200 components = 0.000215922 Jy ! Clean residual min=-0.004332 max=0.003427 Jy/beam ! Clean residual mean=-0.000048 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.72314 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.72314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175802Jy sigma=0.001052 ! Fit after self-cal, rms=0.175800Jy sigma=0.001052 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175800Jy sigma=0.001052 ! Fit after self-cal, rms=0.175732Jy sigma=0.001052 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=3.47 mas, bpa=-10.04 degrees ! Estimated noise=1129.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.479511 Jy ! Component: 100 - total flux cleaned = 0.596928 Jy ! Component: 150 - total flux cleaned = 0.646901 Jy ! Component: 200 - total flux cleaned = 0.670426 Jy ! Total flux subtracted in 200 components = 0.670426 Jy ! Clean residual min=-0.006485 max=0.010610 Jy/beam ! Clean residual mean=0.000032 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.670426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.670426 Jy ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=4.04 mas, bpa=-8.412 degrees ! Estimated noise=822.141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017263 Jy ! Component: 100 - total flux cleaned = 0.0271729 Jy ! Component: 150 - total flux cleaned = 0.0338436 Jy ! Component: 200 - total flux cleaned = 0.03877 Jy ! Total flux subtracted in 200 components = 0.03877 Jy ! Clean residual min=-0.004538 max=0.003916 Jy/beam ! Clean residual mean=0.000004 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.709196 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 0.709196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.811 mas, bmaj=9.364 mas, bpa=7.363 degrees ! Estimated noise=1115.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544908 Jy ! Component: 100 - total flux cleaned = 0.0086185 Jy ! Component: 150 - total flux cleaned = 0.0107414 Jy ! Component: 200 - total flux cleaned = 0.0118499 Jy ! Total flux subtracted in 200 components = 0.0118499 Jy ! Clean residual min=-0.004203 max=0.004578 Jy/beam ! Clean residual mean=-0.000080 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.721046 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523358 Jy ! Component: 100 - total flux cleaned = 0.000878053 Jy ! Component: 150 - total flux cleaned = 0.00107674 Jy ! Component: 200 - total flux cleaned = 0.00124876 Jy ! Total flux subtracted in 200 components = 0.00124876 Jy ! Clean residual min=-0.004144 max=0.004606 Jy/beam ! Clean residual mean=-0.000089 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.722294 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 68 components and 0.722295 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=4.04 mas, bpa=-8.412 degrees ! Estimated noise=822.141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111854 Jy ! Component: 100 - total flux cleaned = -0.000826133 Jy ! Component: 150 - total flux cleaned = -0.000644473 Jy ! Component: 200 - total flux cleaned = -0.000385911 Jy ! Total flux subtracted in 200 components = -0.000385911 Jy ! Clean residual min=-0.004603 max=0.003655 Jy/beam ! Clean residual mean=-0.000031 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.721909 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.721909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175834Jy sigma=0.001053 ! Fit after self-cal, rms=0.175829Jy sigma=0.001053 wmodel J2212+2355_S_2009_05_13_pus_map.mod ! Writing 86 model components to file: J2212+2355_S_2009_05_13_pus_map.mod wobs J2212+2355_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J2212+2355_S_2009_05_13_pus_uvs.fits wwins J2212+2355_S_2009_05_13_pus_map.win ! wwins: Wrote 3 windows to J2212+2355_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139672 Jy ! Component: 100 - total flux cleaned = -0.00240861 Jy ! Component: 150 - total flux cleaned = -0.00338301 Jy ! Component: 200 - total flux cleaned = -0.00395065 Jy ! Component: 250 - total flux cleaned = -0.00413624 Jy ! Component: 300 - total flux cleaned = -0.00456016 Jy ! Component: 350 - total flux cleaned = -0.00491745 Jy ! Component: 400 - total flux cleaned = -0.00532765 Jy ! Component: 450 - total flux cleaned = -0.00555882 Jy ! Component: 500 - total flux cleaned = -0.00572905 Jy ! Component: 550 - total flux cleaned = -0.00584107 Jy ! Component: 600 - total flux cleaned = -0.00589672 Jy ! Component: 650 - total flux cleaned = -0.00600703 Jy ! Component: 700 - total flux cleaned = -0.00606183 Jy ! Component: 750 - total flux cleaned = -0.00627686 Jy ! Component: 800 - total flux cleaned = -0.00616992 Jy ! Component: 850 - total flux cleaned = -0.00622232 Jy ! Component: 900 - total flux cleaned = -0.00606533 Jy ! Component: 950 - total flux cleaned = -0.00622157 Jy ! Component: 1000 - total flux cleaned = -0.00616937 Jy ! Component: 1050 - total flux cleaned = -0.00611828 Jy ! Component: 1100 - total flux cleaned = -0.00616908 Jy ! Component: 1150 - total flux cleaned = -0.00621958 Jy ! Component: 1200 - total flux cleaned = -0.00611928 Jy ! Component: 1250 - total flux cleaned = -0.00626901 Jy ! Component: 1300 - total flux cleaned = -0.00607046 Jy ! Component: 1350 - total flux cleaned = -0.00612015 Jy ! Component: 1400 - total flux cleaned = -0.00607129 Jy ! Component: 1450 - total flux cleaned = -0.00607107 Jy ! Component: 1500 - total flux cleaned = -0.00611977 Jy ! Component: 1550 - total flux cleaned = -0.00602371 Jy ! Component: 1600 - total flux cleaned = -0.00602398 Jy ! Component: 1650 - total flux cleaned = -0.00635539 Jy ! Component: 1700 - total flux cleaned = -0.00621385 Jy ! Component: 1750 - total flux cleaned = -0.00630768 Jy ! Component: 1800 - total flux cleaned = -0.00616811 Jy ! Component: 1850 - total flux cleaned = -0.00626104 Jy ! Component: 1900 - total flux cleaned = -0.00630721 Jy ! Component: 1950 - total flux cleaned = -0.00626154 Jy ! Component: 2000 - total flux cleaned = -0.00626194 Jy ! Component: 2050 - total flux cleaned = -0.00644326 Jy ! Component: 2100 - total flux cleaned = -0.00635334 Jy ! Component: 2150 - total flux cleaned = -0.00648822 Jy ! Component: 2200 - total flux cleaned = -0.00644338 Jy ! Component: 2250 - total flux cleaned = -0.0063543 Jy ! Component: 2300 - total flux cleaned = -0.00635453 Jy ! Component: 2350 - total flux cleaned = -0.00644217 Jy ! Component: 2400 - total flux cleaned = -0.00635453 Jy ! Component: 2450 - total flux cleaned = -0.00648526 Jy ! Component: 2500 - total flux cleaned = -0.00635489 Jy ! Component: 2550 - total flux cleaned = -0.006225 Jy ! Component: 2600 - total flux cleaned = -0.00639714 Jy ! Component: 2650 - total flux cleaned = -0.00639718 Jy ! Component: 2700 - total flux cleaned = -0.00622629 Jy ! Component: 2750 - total flux cleaned = -0.0064389 Jy ! Component: 2800 - total flux cleaned = -0.00643896 Jy ! Component: 2850 - total flux cleaned = -0.00643897 Jy ! Component: 2900 - total flux cleaned = -0.00652279 Jy ! Component: 2950 - total flux cleaned = -0.00652283 Jy ! Component: 3000 - total flux cleaned = -0.00664828 Jy ! Component: 3050 - total flux cleaned = -0.00681435 Jy ! Component: 3100 - total flux cleaned = -0.0066488 Jy ! Component: 3150 - total flux cleaned = -0.00668996 Jy ! Component: 3200 - total flux cleaned = -0.00681318 Jy ! Component: 3250 - total flux cleaned = -0.00689503 Jy ! Component: 3300 - total flux cleaned = -0.00677254 Jy ! Component: 3350 - total flux cleaned = -0.007016 Jy ! Component: 3400 - total flux cleaned = -0.0069756 Jy ! Component: 3450 - total flux cleaned = -0.00685456 Jy ! Component: 3500 - total flux cleaned = -0.00701503 Jy ! Component: 3550 - total flux cleaned = -0.0071753 Jy ! Component: 3600 - total flux cleaned = -0.00717552 Jy ! Component: 3650 - total flux cleaned = -0.00737436 Jy ! Component: 3700 - total flux cleaned = -0.00733458 Jy ! Component: 3750 - total flux cleaned = -0.00745329 Jy ! Component: 3800 - total flux cleaned = -0.00733505 Jy ! Component: 3850 - total flux cleaned = -0.007492 Jy ! Component: 3900 - total flux cleaned = -0.00745255 Jy ! Component: 3950 - total flux cleaned = -0.00764775 Jy ! Component: 4000 - total flux cleaned = -0.00780326 Jy ! Component: 4050 - total flux cleaned = -0.00784192 Jy ! Total flux subtracted in 4096 components = -0.00788049 Jy ! Clean residual min=-0.002053 max=0.002497 Jy/beam ! Clean residual mean=-0.000015 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.714028 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 422 components and 0.714028 Jy ![Exited script file: muppet] wmap "J2212+2355_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.422 x 4.04 at -8.412 degrees (North through East) ! Clean map min=-0.00372 max=0.62393 Jy/beam ! Writing clean map to FITS file: J2212+2355_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.623932 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000672421 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.323314 0.323314 0.646629 1.29326 2.58651 5.17303 10.3461 20.6921 41.3842 82.7685 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.623 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.422 x 4.04 at -8.412 degrees (North through East) ! Clean map min=-0.00372 max=0.62393 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212+2355_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:41:04 2017