! Started logfile: J1740+5211_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:45:53 2017 obs J1740+5211_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1740+5211_X_2009_05_13_pus_uva.fits ! AN table 1: 183 integrations on 120 of 120 possible baselines. ! AN table 2: 47 integrations on 120 of 120 possible baselines. ! AN table 3: 31 integrations on 120 of 120 possible baselines. ! AN table 4: 14 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.141909 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1740+5211 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 18732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1740+5211_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1981 telescope corrections were flagged in sub-array 1. ! A total of 664 telescope corrections were flagged in sub-array 2. ! A total of 343 telescope corrections were flagged in sub-array 3. ! A total of 200 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1981 telescope corrections were flagged in sub-array 1. ! A total of 664 telescope corrections were flagged in sub-array 2. ! A total of 343 telescope corrections were flagged in sub-array 3. ! A total of 200 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1981 telescope corrections were flagged in sub-array 1. ! A total of 664 telescope corrections were flagged in sub-array 2. ! A total of 343 telescope corrections were flagged in sub-array 3. ! A total of 200 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1981 telescope corrections were flagged in sub-array 1. ! A total of 664 telescope corrections were flagged in sub-array 2. ! A total of 343 telescope corrections were flagged in sub-array 3. ! A total of 200 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.448354Jy sigma=0.003726 ! Fit after self-cal, rms=0.347657Jy sigma=0.002894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5305 mas, bmaj=0.6803 mas, bpa=13.44 degrees ! Estimated noise=877.898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.528887 Jy ! Component: 100 - total flux cleaned = 0.660417 Jy ! Total flux subtracted in 100 components = 0.660417 Jy ! Clean residual min=-0.011000 max=0.054445 Jy/beam ! Clean residual mean=0.000411 rms=0.003626 Jy/beam ! Combined flux in latest and established models = 0.660417 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.660417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211508Jy sigma=0.001875 ! Fit after self-cal, rms=0.211484Jy sigma=0.001875 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626737 Jy ! Component: 100 - total flux cleaned = 0.101637 Jy ! Total flux subtracted in 100 components = 0.101637 Jy ! Clean residual min=-0.010076 max=0.022300 Jy/beam ! Clean residual mean=0.000263 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.762054 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.762054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181916Jy sigma=0.001523 ! Fit after self-cal, rms=0.181827Jy sigma=0.001522 ! Inverting map ! Added new window around map position (0.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267868 Jy ! Component: 100 - total flux cleaned = 0.0457901 Jy ! Total flux subtracted in 100 components = 0.0457901 Jy ! Clean residual min=-0.009125 max=0.012698 Jy/beam ! Clean residual mean=0.000198 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.807844 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.807844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175073Jy sigma=0.001428 ! Fit after self-cal, rms=0.174968Jy sigma=0.001427 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6542 mas, bmaj=0.8015 mas, bpa=8.663 degrees ! Estimated noise=609.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 0.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300481 Jy ! Component: 100 - total flux cleaned = 0.0499176 Jy ! Component: 150 - total flux cleaned = 0.0636202 Jy ! Component: 200 - total flux cleaned = 0.0731652 Jy ! Total flux subtracted in 200 components = 0.0731652 Jy ! Clean residual min=-0.004779 max=0.013444 Jy/beam ! Clean residual mean=0.002021 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.881009 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 88 components and 0.881009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170393Jy sigma=0.001350 ! Fit after self-cal, rms=0.170239Jy sigma=0.001349 ! Inverting map ! Added new window around map position (-1.1, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112964 Jy ! Component: 100 - total flux cleaned = 0.0152093 Jy ! Component: 150 - total flux cleaned = 0.0185314 Jy ! Component: 200 - total flux cleaned = 0.0211938 Jy ! Total flux subtracted in 200 components = 0.0211938 Jy ! Clean residual min=-0.004580 max=0.009253 Jy/beam ! Clean residual mean=0.001752 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.902203 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 118 components and 0.902203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169622Jy sigma=0.001335 ! Fit after self-cal, rms=0.169592Jy sigma=0.001335 ! Inverting map ! Added new window around map position (9.9, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774286 Jy ! Component: 100 - total flux cleaned = 0.0106521 Jy ! Component: 150 - total flux cleaned = 0.0124851 Jy ! Component: 200 - total flux cleaned = 0.0140979 Jy ! Total flux subtracted in 200 components = 0.0140979 Jy ! Clean residual min=-0.004381 max=0.008388 Jy/beam ! Clean residual mean=0.001582 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.916301 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 140 components and 0.916301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169279Jy sigma=0.001329 ! Fit after self-cal, rms=0.169259Jy sigma=0.001329 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.07 HO 1.00* ! KK 1.03 KP 1.03 LA 1.03 MK 1.00 ! NL 0.97 NY 0.97 OV 0.97 PT 0.99 ! SC 0.99 TS 0.95 WZ 0.99 KB 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* HO 1.00* ! KK 1.11 KP 1.00* LA 1.00* MK 1.04 ! NL 1.00* NY 0.96 OV 1.00* PT 1.00* ! SC 1.00* TS 0.90 WZ 1.00 KB 0.88 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 0.99 HN 1.11 HO 1.00* ! KK 1.00* KP 1.00 LA 1.04 MK 1.00* ! NL 0.94 NY 0.92 OV 0.98 PT 0.98 ! SC 1.15 TS 1.00* WZ 0.92 KB 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.05 HO 1.00* ! KK 1.01 KP 0.97 LA 1.00 MK 1.00 ! NL 0.96 NY 0.96 OV 0.95 PT 1.04 ! SC 1.01 TS 0.96 WZ 0.98 KB 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* HO 1.00* ! KK 1.03 KP 1.00* LA 1.00* MK 1.06 ! NL 1.00* NY 0.98 OV 1.00* PT 1.00* ! SC 1.00* TS 0.89 WZ 0.98 KB 0.87 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.96 HN 1.10 HO 1.00* ! KK 1.00* KP 0.96 LA 1.01 MK 1.00* ! NL 0.96 NY 0.93 OV 0.94 PT 1.01 ! SC 1.16 TS 1.00* WZ 0.91 KB 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.08 HO 1.00* ! KK 1.03 KP 1.00 LA 1.04 MK 0.96 ! NL 0.99 NY 0.98 OV 1.00 PT 1.04 ! SC 1.04 TS 0.97 WZ 1.00 KB 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* HO 1.00* ! KK 1.08 KP 1.00* LA 1.00* MK 0.98 ! NL 1.00* NY 1.05 OV 1.00* PT 1.00* ! SC 1.00* TS 0.89 WZ 0.97 KB 0.93 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.00 HN 1.13 HO 1.00* ! KK 1.00* KP 0.98 LA 1.05 MK 1.00* ! NL 0.98 NY 0.97 OV 0.97 PT 1.03 ! SC 1.17 TS 1.00* WZ 0.90 KB 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.06 HO 1.00* ! KK 1.03 KP 1.01 LA 1.01 MK 0.99 ! NL 1.00 NY 0.96 OV 0.98 PT 1.04 ! SC 0.99 TS 0.97 WZ 0.99 KB 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* HO 1.00* ! KK 1.07 KP 1.00* LA 1.00* MK 0.98 ! NL 1.00* NY 0.99 OV 1.00* PT 1.00* ! SC 1.00* TS 0.90 WZ 1.01 KB 0.90 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.99 HN 1.11 HO 1.00* ! KK 1.00* KP 0.99 LA 1.03 MK 1.00* ! NL 0.96 NY 0.95 OV 1.00 PT 1.03 ! SC 1.17 TS 1.00* WZ 0.91 KB 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Fit before self-cal, rms=0.169259Jy sigma=0.001329 ! Fit after self-cal, rms=0.165768Jy sigma=0.001280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6553 mas, bmaj=0.7994 mas, bpa=8.764 degrees ! Estimated noise=610.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107104 Jy ! Component: 100 - total flux cleaned = -0.00162199 Jy ! Component: 150 - total flux cleaned = -0.00208549 Jy ! Component: 200 - total flux cleaned = -0.00249861 Jy ! Total flux subtracted in 200 components = -0.00249861 Jy ! Clean residual min=-0.004354 max=0.005386 Jy/beam ! Clean residual mean=0.000467 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.913802 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 159 components and 0.913803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165595Jy sigma=0.001278 ! Fit after self-cal, rms=0.165646Jy sigma=0.001277 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165646Jy sigma=0.001277 ! Fit after self-cal, rms=0.164119Jy sigma=0.001236 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6565 mas, bmaj=0.8061 mas, bpa=7.879 degrees ! Estimated noise=613.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234187 Jy ! Component: 100 - total flux cleaned = -0.00331764 Jy ! Component: 150 - total flux cleaned = -0.00439342 Jy ! Component: 200 - total flux cleaned = -0.0049216 Jy ! Total flux subtracted in 200 components = -0.0049216 Jy ! Clean residual min=-0.003006 max=0.003767 Jy/beam ! Clean residual mean=0.000197 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.908881 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 178 components and 0.908881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163918Jy sigma=0.001234 ! Fit after self-cal, rms=0.163941Jy sigma=0.001234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23.1, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219611 Jy ! Component: 100 - total flux cleaned = 0.00200211 Jy ! Component: 150 - total flux cleaned = 0.00191101 Jy ! Component: 200 - total flux cleaned = 0.00182597 Jy ! Total flux subtracted in 200 components = 0.00182597 Jy ! Clean residual min=-0.002938 max=0.003506 Jy/beam ! Clean residual mean=0.000178 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.910707 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 188 components and 0.910707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163810Jy sigma=0.001233 ! Fit after self-cal, rms=0.163801Jy sigma=0.001233 ! Inverting map ! Added new window around map position (-1.3, 18.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166528 Jy ! Component: 100 - total flux cleaned = 0.00158054 Jy ! Component: 150 - total flux cleaned = 0.00149821 Jy ! Component: 200 - total flux cleaned = 0.00142051 Jy ! Total flux subtracted in 200 components = 0.00142051 Jy ! Clean residual min=-0.002868 max=0.003157 Jy/beam ! Clean residual mean=0.000160 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.912127 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 197 components and 0.912127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163689Jy sigma=0.001232 ! Fit after self-cal, rms=0.163684Jy sigma=0.001232 ! Inverting map ! Added new window around map position (12.3, -20.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237262 Jy ! Component: 100 - total flux cleaned = 0.00261162 Jy ! Component: 150 - total flux cleaned = 0.00268556 Jy ! Component: 200 - total flux cleaned = 0.00268441 Jy ! Total flux subtracted in 200 components = 0.00268441 Jy ! Clean residual min=-0.002816 max=0.002965 Jy/beam ! Clean residual mean=0.000136 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.914812 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 208 components and 0.914812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163592Jy sigma=0.001232 ! Fit after self-cal, rms=0.163592Jy sigma=0.001232 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163592Jy sigma=0.001232 ! Fit after self-cal, rms=0.163220Jy sigma=0.001229 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6561 mas, bmaj=0.8065 mas, bpa=7.938 degrees ! Estimated noise=612.659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148596 Jy ! Component: 100 - total flux cleaned = -0.00148839 Jy ! Component: 150 - total flux cleaned = -0.0015616 Jy ! Component: 200 - total flux cleaned = -0.00135018 Jy ! Total flux subtracted in 200 components = -0.00135018 Jy ! Clean residual min=-0.002689 max=0.002881 Jy/beam ! Clean residual mean=0.000147 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.913462 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 224 components and 0.913462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163143Jy sigma=0.001229 ! Fit after self-cal, rms=0.163148Jy sigma=0.001229 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015142 Jy ! Component: 100 - total flux cleaned = 0.00157874 Jy ! Component: 150 - total flux cleaned = 0.00170609 Jy ! Component: 200 - total flux cleaned = 0.00176758 Jy ! Total flux subtracted in 200 components = 0.00176758 Jy ! Clean residual min=-0.002598 max=0.002660 Jy/beam ! Clean residual mean=0.000129 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.915229 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 238 components and 0.915229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163072Jy sigma=0.001228 ! Fit after self-cal, rms=0.163066Jy sigma=0.001228 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163066Jy sigma=0.001228 ! Fit after self-cal, rms=0.162989Jy sigma=0.001228 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=2.654 mas, bpa=-18.43 degrees ! Estimated noise=903.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622721 Jy ! Component: 100 - total flux cleaned = 0.00104797 Jy ! Component: 150 - total flux cleaned = 0.00140024 Jy ! Component: 200 - total flux cleaned = 0.00175934 Jy ! Total flux subtracted in 200 components = 0.00175934 Jy ! Clean residual min=-0.002864 max=0.003209 Jy/beam ! Clean residual mean=0.000379 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.916989 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 259 components and 0.916989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162976Jy sigma=0.001228 ! Fit after self-cal, rms=0.162974Jy sigma=0.001228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349203 Jy ! Component: 100 - total flux cleaned = 0.000698827 Jy ! Component: 150 - total flux cleaned = 0.000855502 Jy ! Component: 200 - total flux cleaned = 0.000964715 Jy ! Total flux subtracted in 200 components = 0.000964715 Jy ! Clean residual min=-0.002886 max=0.003196 Jy/beam ! Clean residual mean=0.000351 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.917953 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 274 components and 0.917953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162973Jy sigma=0.001228 ! Fit after self-cal, rms=0.162971Jy sigma=0.001228 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6562 mas, bmaj=0.8068 mas, bpa=7.904 degrees ! Estimated noise=612.422 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6562 x 0.8068 at 7.904 degrees (North through East) ! Clean map min=-0.0025237 max=0.70231 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162971Jy sigma=0.001228 ! Fit after self-cal, rms=1.161673Jy sigma=0.001025 ! Inverting map and beam ! Estimated beam: bmin=0.6575 mas, bmaj=0.8068 mas, bpa=7.745 degrees ! Estimated noise=613.001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182456 Jy ! Component: 100 - total flux cleaned = -0.00223987 Jy ! Component: 150 - total flux cleaned = -0.00262167 Jy ! Component: 200 - total flux cleaned = -0.00280265 Jy ! Total flux subtracted in 200 components = -0.00280265 Jy ! Clean residual min=-0.002637 max=0.002465 Jy/beam ! Clean residual mean=0.000008 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.915151 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 290 components and 0.915151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.161653Jy sigma=0.001024 ! Fit after self-cal, rms=1.161697Jy sigma=0.001024 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307799 Jy ! Component: 100 - total flux cleaned = -0.000475887 Jy ! Component: 150 - total flux cleaned = -0.000584406 Jy ! Component: 200 - total flux cleaned = -0.000740279 Jy ! Total flux subtracted in 200 components = -0.000740279 Jy ! Clean residual min=-0.002620 max=0.002465 Jy/beam ! Clean residual mean=0.000016 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.91441 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 296 components and 0.914411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.161690Jy sigma=0.001024 ! Fit after self-cal, rms=1.161694Jy sigma=0.001024 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.161694Jy sigma=0.001024 ! Fit after self-cal, rms=1.170463Jy sigma=0.001024 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5346 mas, bmaj=0.6808 mas, bpa=12.54 degrees ! Estimated noise=893.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.53203 Jy ! Component: 100 - total flux cleaned = 0.662532 Jy ! Component: 150 - total flux cleaned = 0.724978 Jy ! Component: 200 - total flux cleaned = 0.76473 Jy ! Total flux subtracted in 200 components = 0.76473 Jy ! Clean residual min=-0.006160 max=0.021389 Jy/beam ! Clean residual mean=0.000211 rms=0.001738 Jy/beam ! Combined flux in latest and established models = 0.764729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.764729 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6576 mas, bmaj=0.807 mas, bpa=7.661 degrees ! Estimated noise=612.815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461072 Jy ! Component: 100 - total flux cleaned = 0.0729127 Jy ! Component: 150 - total flux cleaned = 0.0900435 Jy ! Component: 200 - total flux cleaned = 0.101708 Jy ! Total flux subtracted in 200 components = 0.101708 Jy ! Clean residual min=-0.002395 max=0.006469 Jy/beam ! Clean residual mean=0.000648 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.866437 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 115 components and 0.866437 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825243 Jy ! Component: 100 - total flux cleaned = 0.0143262 Jy ! Component: 150 - total flux cleaned = 0.0191834 Jy ! Component: 200 - total flux cleaned = 0.0232644 Jy ! Total flux subtracted in 200 components = 0.0232644 Jy ! Clean residual min=-0.002425 max=0.003454 Jy/beam ! Clean residual mean=0.000321 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.889702 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 145 components and 0.889702 Jy ! Inverting map ! Added new window around map position (-16.6, -16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373457 Jy ! Component: 100 - total flux cleaned = 0.00649126 Jy ! Component: 150 - total flux cleaned = 0.00871112 Jy ! Component: 200 - total flux cleaned = 0.0105113 Jy ! Total flux subtracted in 200 components = 0.0105113 Jy ! Clean residual min=-0.002502 max=0.002786 Jy/beam ! Clean residual mean=0.000182 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.900213 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 163 components and 0.900213 Jy ! Inverting map ! Added new window around map position (1.5, 2.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205313 Jy ! Component: 100 - total flux cleaned = 0.00291873 Jy ! Component: 150 - total flux cleaned = 0.00372204 Jy ! Component: 200 - total flux cleaned = 0.00425149 Jy ! Total flux subtracted in 200 components = 0.00425149 Jy ! Clean residual min=-0.002481 max=0.002670 Jy/beam ! Clean residual mean=0.000119 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.904464 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 182 components and 0.904464 Jy ! Inverting map ! Added new window around map position (-12.9, 18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019273 Jy ! Component: 100 - total flux cleaned = 0.0023564 Jy ! Component: 150 - total flux cleaned = 0.0029701 Jy ! Component: 200 - total flux cleaned = 0.00336272 Jy ! Total flux subtracted in 200 components = 0.00336272 Jy ! Clean residual min=-0.002441 max=0.002573 Jy/beam ! Clean residual mean=0.000082 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.907827 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 195 components and 0.907827 Jy ! Inverting map ! Added new window around map position (5, 10.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173196 Jy ! Component: 100 - total flux cleaned = 0.00198575 Jy ! Component: 150 - total flux cleaned = 0.00235059 Jy ! Component: 200 - total flux cleaned = 0.00258526 Jy ! Total flux subtracted in 200 components = 0.00258526 Jy ! Clean residual min=-0.002474 max=0.002391 Jy/beam ! Clean residual mean=0.000044 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.910412 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 215 components and 0.910412 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=2.656 mas, bpa=-18.84 degrees ! Estimated noise=902.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241464 Jy ! Component: 100 - total flux cleaned = 0.00364162 Jy ! Component: 150 - total flux cleaned = 0.00420369 Jy ! Component: 200 - total flux cleaned = 0.00447446 Jy ! Total flux subtracted in 200 components = 0.00447446 Jy ! Clean residual min=-0.002394 max=0.002539 Jy/beam ! Clean residual mean=-0.000042 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.914887 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240953 Jy ! Component: 100 - total flux cleaned = 0.000388356 Jy ! Component: 150 - total flux cleaned = 0.000526099 Jy ! Component: 200 - total flux cleaned = 0.000687123 Jy ! Total flux subtracted in 200 components = 0.000687123 Jy ! Clean residual min=-0.002391 max=0.002404 Jy/beam ! Clean residual mean=-0.000067 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.915574 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 253 components and 0.915574 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6576 mas, bmaj=0.807 mas, bpa=7.661 degrees ! Estimated noise=612.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102239 Jy ! Component: 100 - total flux cleaned = -0.00125636 Jy ! Component: 150 - total flux cleaned = -0.00125822 Jy ! Component: 200 - total flux cleaned = -0.00125912 Jy ! Total flux subtracted in 200 components = -0.00125912 Jy ! Clean residual min=-0.002445 max=0.002283 Jy/beam ! Clean residual mean=-0.000004 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.914315 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 272 components and 0.914315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.170433Jy sigma=0.001022 ! Fit after self-cal, rms=1.170493Jy sigma=0.001022 wmodel J1740+5211_X_2009_05_13_pus_map.mod ! Writing 272 model components to file: J1740+5211_X_2009_05_13_pus_map.mod wobs J1740+5211_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1740+5211_X_2009_05_13_pus_uvs.fits wwins J1740+5211_X_2009_05_13_pus_map.win ! wwins: Wrote 13 windows to J1740+5211_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000820805 Jy ! Component: 100 - total flux cleaned = -0.00103098 Jy ! Component: 150 - total flux cleaned = -0.00111138 Jy ! Component: 200 - total flux cleaned = -0.00115096 Jy ! Component: 250 - total flux cleaned = -0.00118989 Jy ! Component: 300 - total flux cleaned = -0.00122782 Jy ! Component: 350 - total flux cleaned = -0.00111511 Jy ! Component: 400 - total flux cleaned = -0.00100419 Jy ! Component: 450 - total flux cleaned = -0.00085847 Jy ! Component: 500 - total flux cleaned = -0.000786495 Jy ! Component: 550 - total flux cleaned = -0.000714929 Jy ! Component: 600 - total flux cleaned = -0.000608682 Jy ! Component: 650 - total flux cleaned = -0.000503632 Jy ! Component: 700 - total flux cleaned = -0.000365175 Jy ! Component: 750 - total flux cleaned = -0.000365475 Jy ! Component: 800 - total flux cleaned = -0.00033143 Jy ! Component: 850 - total flux cleaned = -0.000331256 Jy ! Component: 900 - total flux cleaned = -0.000230857 Jy ! Component: 950 - total flux cleaned = -0.00019769 Jy ! Component: 1000 - total flux cleaned = -0.000230747 Jy ! Component: 1050 - total flux cleaned = -0.000165071 Jy ! Component: 1100 - total flux cleaned = -0.000230071 Jy ! Component: 1150 - total flux cleaned = -0.000165544 Jy ! Component: 1200 - total flux cleaned = -0.00019766 Jy ! Component: 1250 - total flux cleaned = -0.000197804 Jy ! Component: 1300 - total flux cleaned = -0.000229466 Jy ! Component: 1350 - total flux cleaned = -0.000229449 Jy ! Component: 1400 - total flux cleaned = -0.000198145 Jy ! Component: 1450 - total flux cleaned = -0.000260218 Jy ! Component: 1500 - total flux cleaned = -0.000260064 Jy ! Component: 1550 - total flux cleaned = -0.000167961 Jy ! Component: 1600 - total flux cleaned = -0.000229084 Jy ! Component: 1650 - total flux cleaned = -0.000259543 Jy ! Component: 1700 - total flux cleaned = -0.000199167 Jy ! Component: 1750 - total flux cleaned = -0.00022925 Jy ! Component: 1800 - total flux cleaned = -0.000259166 Jy ! Component: 1850 - total flux cleaned = -0.000259214 Jy ! Component: 1900 - total flux cleaned = -0.000229672 Jy ! Component: 1950 - total flux cleaned = -0.000229722 Jy ! Component: 2000 - total flux cleaned = -0.000288326 Jy ! Component: 2050 - total flux cleaned = -0.000259128 Jy ! Component: 2100 - total flux cleaned = -0.000259134 Jy ! Component: 2150 - total flux cleaned = -0.00025902 Jy ! Component: 2200 - total flux cleaned = -0.000230354 Jy ! Component: 2250 - total flux cleaned = -0.000230504 Jy ! Component: 2300 - total flux cleaned = -0.000287653 Jy ! Component: 2350 - total flux cleaned = -0.000259106 Jy ! Component: 2400 - total flux cleaned = -0.000259092 Jy ! Component: 2450 - total flux cleaned = -0.000230907 Jy ! Component: 2500 - total flux cleaned = -0.000202886 Jy ! Component: 2550 - total flux cleaned = -0.000202908 Jy ! Component: 2600 - total flux cleaned = -0.000258631 Jy ! Component: 2650 - total flux cleaned = -0.000230878 Jy ! Component: 2700 - total flux cleaned = -0.000203264 Jy ! Component: 2750 - total flux cleaned = -0.000258291 Jy ! Component: 2800 - total flux cleaned = -0.000203473 Jy ! Component: 2850 - total flux cleaned = -0.000230777 Jy ! Component: 2900 - total flux cleaned = -0.00020362 Jy ! Component: 2950 - total flux cleaned = -0.000230716 Jy ! Component: 3000 - total flux cleaned = -0.000230701 Jy ! Component: 3050 - total flux cleaned = -0.000284539 Jy ! Component: 3100 - total flux cleaned = -0.000230847 Jy ! Component: 3150 - total flux cleaned = -0.000204186 Jy ! Component: 3200 - total flux cleaned = -0.000204201 Jy ! Component: 3250 - total flux cleaned = -0.000230762 Jy ! Component: 3300 - total flux cleaned = -0.000257322 Jy ! Component: 3350 - total flux cleaned = -0.000204686 Jy ! Component: 3400 - total flux cleaned = -0.000178503 Jy ! Component: 3450 - total flux cleaned = -0.000230947 Jy ! Component: 3500 - total flux cleaned = -0.000230979 Jy ! Component: 3550 - total flux cleaned = -0.000230968 Jy ! Component: 3600 - total flux cleaned = -0.000256856 Jy ! Component: 3650 - total flux cleaned = -0.000205198 Jy ! Component: 3700 - total flux cleaned = -0.000231027 Jy ! Component: 3750 - total flux cleaned = -0.00025667 Jy ! Component: 3800 - total flux cleaned = -0.000231057 Jy ! Component: 3850 - total flux cleaned = -0.00025655 Jy ! Component: 3900 - total flux cleaned = -0.000256583 Jy ! Component: 3950 - total flux cleaned = -0.000256566 Jy ! Component: 4000 - total flux cleaned = -0.000256543 Jy ! Component: 4050 - total flux cleaned = -0.000256532 Jy ! Total flux subtracted in 4096 components = -0.000256527 Jy ! Clean residual min=-0.001428 max=0.001441 Jy/beam ! Clean residual mean=0.000014 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.914058 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 600 components and 0.914058 Jy ![Exited script file: muppet] wmap "J1740+5211_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6576 x 0.807 at 7.661 degrees (North through East) ! Clean map min=-0.0022455 max=0.70333 Jy/beam ! Writing clean map to FITS file: J1740+5211_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.703331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00045074 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.192259 0.192259 0.384519 0.769037 1.53807 3.07615 6.1523 12.3046 24.6092 49.2184 98.4368 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.703 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6576 x 0.807 at 7.661 degrees (North through East) ! Clean map min=-0.0022455 max=0.70333 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1740+5211_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:46:02 2017