! Started logfile: J1616-3509_X_2009_05_13_pus_uvs.log on Sat Jan 21 13:09:29 2017 obs J1616-3509_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1616-3509_X_2009_05_13_pus_uva.fits ! AN table 1: 186 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.270968 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1616-3509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 24192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1616-3509_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1411 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1499 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1408 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958921Jy sigma=0.007324 ! Fit after self-cal, rms=0.883099Jy sigma=0.006790 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.4486 mas, bmaj=0.9012 mas, bpa=-43.46 degrees ! Estimated noise=1848.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.096209 Jy ! Component: 100 - total flux cleaned = 0.124037 Jy ! Total flux subtracted in 100 components = 0.124037 Jy ! Clean residual min=-0.008721 max=0.013039 Jy/beam ! Clean residual mean=0.000049 rms=0.002766 Jy/beam ! Combined flux in latest and established models = 0.124037 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.124037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181125Jy sigma=0.001134 ! Fit after self-cal, rms=0.181060Jy sigma=0.001133 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7175 mas, bmaj=1.2 mas, bpa=-36.49 degrees ! Estimated noise=609.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021762 Jy ! Component: 100 - total flux cleaned = 0.0311483 Jy ! Component: 150 - total flux cleaned = 0.0353769 Jy ! Component: 200 - total flux cleaned = 0.0373251 Jy ! Total flux subtracted in 200 components = 0.0373251 Jy ! Clean residual min=-0.004530 max=0.005364 Jy/beam ! Clean residual mean=-0.000235 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.161362 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 43 components and 0.161362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179191Jy sigma=0.001107 ! Fit after self-cal, rms=0.179122Jy sigma=0.001107 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.95 HN 1.00* HO 1.01 ! KK 1.00* KP 0.97 LA 1.02 MK 1.03 ! NL 1.08 NY 1.00* OV 0.96 PT 0.95 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.93 HN 1.00* HO 1.12 ! KK 1.00* KP 0.93 LA 0.98 MK 1.09 ! NL 1.12 NY 1.00* OV 0.96 PT 1.00 ! SC 0.89 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.00* HO 0.94 ! KK 1.00* KP 0.93 LA 1.00 MK 0.91 ! NL 1.13 NY 1.00* OV 1.00 PT 1.05 ! SC 1.40 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 1.00* HO 0.83 ! KK 1.00* KP 0.94 LA 0.95 MK 1.00 ! NL 1.12 NY 1.00* OV 1.00 PT 1.05 ! SC 0.91 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.179122Jy sigma=0.001107 ! Fit after self-cal, rms=0.182065Jy sigma=0.001102 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7164 mas, bmaj=1.205 mas, bpa=-37.47 degrees ! Estimated noise=607.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389552 Jy ! Component: 100 - total flux cleaned = -0.000420514 Jy ! Component: 150 - total flux cleaned = -0.000448706 Jy ! Component: 200 - total flux cleaned = -0.000474371 Jy ! Total flux subtracted in 200 components = -0.000474371 Jy ! Clean residual min=-0.003850 max=0.004371 Jy/beam ! Clean residual mean=-0.000204 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.160888 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.160888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182047Jy sigma=0.001102 ! Fit after self-cal, rms=0.182332Jy sigma=0.001102 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182332Jy sigma=0.001102 ! Fit after self-cal, rms=0.183262Jy sigma=0.001101 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7135 mas, bmaj=1.2 mas, bpa=-37.77 degrees ! Estimated noise=608.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.97365e-05 Jy ! Component: 100 - total flux cleaned = 6.12793e-05 Jy ! Component: 150 - total flux cleaned = 8.02179e-06 Jy ! Component: 200 - total flux cleaned = -1.56342e-05 Jy ! Total flux subtracted in 200 components = -1.56342e-05 Jy ! Clean residual min=-0.003131 max=0.004029 Jy/beam ! Clean residual mean=-0.000207 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.160872 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.160872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183246Jy sigma=0.001101 ! Fit after self-cal, rms=0.183282Jy sigma=0.001101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109549 Jy ! Component: 100 - total flux cleaned = -0.000110743 Jy ! Component: 150 - total flux cleaned = -0.00011062 Jy ! Component: 200 - total flux cleaned = -0.000110738 Jy ! Total flux subtracted in 200 components = -0.000110738 Jy ! Clean residual min=-0.003147 max=0.004008 Jy/beam ! Clean residual mean=-0.000206 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.160762 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.160762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183267Jy sigma=0.001101 ! Fit after self-cal, rms=0.183261Jy sigma=0.001101 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183261Jy sigma=0.001101 ! Fit after self-cal, rms=0.182501Jy sigma=0.001101 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7105 mas, bmaj=1.196 mas, bpa=-38.14 degrees ! Estimated noise=608.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.16259e-06 Jy ! Component: 100 - total flux cleaned = -4.97972e-05 Jy ! Component: 150 - total flux cleaned = -7.60066e-05 Jy ! Component: 200 - total flux cleaned = -0.00012161 Jy ! Total flux subtracted in 200 components = -0.00012161 Jy ! Clean residual min=-0.003179 max=0.003956 Jy/beam ! Clean residual mean=-0.000206 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.16064 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.16064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182485Jy sigma=0.001101 ! Fit after self-cal, rms=0.182481Jy sigma=0.001101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.19804e-05 Jy ! Component: 100 - total flux cleaned = -9.89144e-05 Jy ! Component: 150 - total flux cleaned = -9.87565e-05 Jy ! Component: 200 - total flux cleaned = -7.65972e-05 Jy ! Total flux subtracted in 200 components = -7.65972e-05 Jy ! Clean residual min=-0.003199 max=0.003933 Jy/beam ! Clean residual mean=-0.000206 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.160563 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.160563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182467Jy sigma=0.001101 ! Fit after self-cal, rms=0.182460Jy sigma=0.001101 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182460Jy sigma=0.001101 ! Fit after self-cal, rms=0.180972Jy sigma=0.001101 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=7.87 mas, bpa=-0.4024 degrees ! Estimated noise=715.273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614056 Jy ! Component: 100 - total flux cleaned = 0.000612949 Jy ! Component: 150 - total flux cleaned = 0.000643543 Jy ! Component: 200 - total flux cleaned = 0.000657806 Jy ! Total flux subtracted in 200 components = 0.000657806 Jy ! Clean residual min=-0.004034 max=0.003755 Jy/beam ! Clean residual mean=-0.000415 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.161221 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 50 components and 0.161221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180968Jy sigma=0.001101 ! Fit after self-cal, rms=0.180958Jy sigma=0.001101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.95413e-05 Jy ! Component: 100 - total flux cleaned = 7.93218e-05 Jy ! Component: 150 - total flux cleaned = 7.9144e-05 Jy ! Component: 200 - total flux cleaned = 9.36317e-05 Jy ! Total flux subtracted in 200 components = 9.36317e-05 Jy ! Clean residual min=-0.004023 max=0.003755 Jy/beam ! Clean residual mean=-0.000418 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.161315 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.161315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180956Jy sigma=0.001101 ! Fit after self-cal, rms=0.180952Jy sigma=0.001101 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=1.192 mas, bpa=-38.53 degrees ! Estimated noise=607.134 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7071 x 1.192 at -38.53 degrees (North through East) ! Clean map min=-0.0030582 max=0.12391 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.4342 mas, bmaj=0.8945 mas, bpa=-44.87 degrees ! Estimated noise=1840.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0968375 Jy ! Component: 100 - total flux cleaned = 0.128001 Jy ! Component: 150 - total flux cleaned = 0.141652 Jy ! Component: 200 - total flux cleaned = 0.149284 Jy ! Total flux subtracted in 200 components = 0.149284 Jy ! Clean residual min=-0.007895 max=0.009104 Jy/beam ! Clean residual mean=-0.000012 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.149284 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.149284 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=1.192 mas, bpa=-38.53 degrees ! Estimated noise=607.134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665567 Jy ! Component: 100 - total flux cleaned = 0.00937322 Jy ! Component: 150 - total flux cleaned = 0.0104645 Jy ! Component: 200 - total flux cleaned = 0.0105627 Jy ! Total flux subtracted in 200 components = 0.0105627 Jy ! Clean residual min=-0.003286 max=0.004004 Jy/beam ! Clean residual mean=-0.000195 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.159846 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.159846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=7.87 mas, bpa=-0.4024 degrees ! Estimated noise=715.273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128503 Jy ! Component: 100 - total flux cleaned = 0.00128549 Jy ! Component: 150 - total flux cleaned = 0.00128517 Jy ! Component: 200 - total flux cleaned = 0.0012848 Jy ! Total flux subtracted in 200 components = 0.0012848 Jy ! Clean residual min=-0.004043 max=0.003880 Jy/beam ! Clean residual mean=-0.000411 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.161131 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41295e-07 Jy ! Component: 100 - total flux cleaned = 1.99168e-05 Jy ! Component: 150 - total flux cleaned = 5.74767e-05 Jy ! Component: 200 - total flux cleaned = 7.51212e-05 Jy ! Total flux subtracted in 200 components = 7.51212e-05 Jy ! Clean residual min=-0.004037 max=0.003839 Jy/beam ! Clean residual mean=-0.000414 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.161206 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 0.161206 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=1.192 mas, bpa=-38.53 degrees ! Estimated noise=607.134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000724229 Jy ! Component: 100 - total flux cleaned = -0.000759818 Jy ! Component: 150 - total flux cleaned = -0.000819586 Jy ! Component: 200 - total flux cleaned = -0.000819876 Jy ! Total flux subtracted in 200 components = -0.000819876 Jy ! Clean residual min=-0.003262 max=0.003873 Jy/beam ! Clean residual mean=-0.000204 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.160386 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.160386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180954Jy sigma=0.001101 ! Fit after self-cal, rms=0.180946Jy sigma=0.001101 wmodel J1616-3509_X_2009_05_13_pus_map.mod ! Writing 35 model components to file: J1616-3509_X_2009_05_13_pus_map.mod wobs J1616-3509_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1616-3509_X_2009_05_13_pus_uvs.fits wwins J1616-3509_X_2009_05_13_pus_map.win ! wwins: Wrote 1 windows to J1616-3509_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128556 Jy ! Component: 100 - total flux cleaned = 0.00175916 Jy ! Component: 150 - total flux cleaned = 0.00181251 Jy ! Component: 200 - total flux cleaned = 0.0017124 Jy ! Component: 250 - total flux cleaned = 0.00147532 Jy ! Component: 300 - total flux cleaned = 0.00115623 Jy ! Component: 350 - total flux cleaned = 0.000894219 Jy ! Component: 400 - total flux cleaned = 0.000686111 Jy ! Component: 450 - total flux cleaned = 0.000525158 Jy ! Component: 500 - total flux cleaned = 0.000253833 Jy ! Component: 550 - total flux cleaned = -0.00012067 Jy ! Component: 600 - total flux cleaned = -0.000339099 Jy ! Component: 650 - total flux cleaned = -0.000658878 Jy ! Component: 700 - total flux cleaned = -0.00103833 Jy ! Component: 750 - total flux cleaned = -0.00127361 Jy ! Component: 800 - total flux cleaned = -0.00160252 Jy ! Component: 850 - total flux cleaned = -0.00192379 Jy ! Component: 900 - total flux cleaned = -0.00223769 Jy ! Component: 950 - total flux cleaned = -0.00254424 Jy ! Component: 1000 - total flux cleaned = -0.00284427 Jy ! Component: 1050 - total flux cleaned = -0.00307897 Jy ! Component: 1100 - total flux cleaned = -0.00342357 Jy ! Component: 1150 - total flux cleaned = -0.00367628 Jy ! Component: 1200 - total flux cleaned = -0.00397874 Jy ! Component: 1250 - total flux cleaned = -0.00419429 Jy ! Component: 1300 - total flux cleaned = -0.00443235 Jy ! Component: 1350 - total flux cleaned = -0.00461416 Jy ! Component: 1400 - total flux cleaned = -0.004819 Jy ! Component: 1450 - total flux cleaned = -0.00507076 Jy ! Component: 1500 - total flux cleaned = -0.00529351 Jy ! Component: 1550 - total flux cleaned = -0.00548813 Jy ! Component: 1600 - total flux cleaned = -0.00560816 Jy ! Component: 1650 - total flux cleaned = -0.00584503 Jy ! Component: 1700 - total flux cleaned = -0.00593869 Jy ! Component: 1750 - total flux cleaned = -0.00612332 Jy ! Component: 1800 - total flux cleaned = -0.00630544 Jy ! Component: 1850 - total flux cleaned = -0.00644057 Jy ! Component: 1900 - total flux cleaned = -0.00661842 Jy ! Component: 1950 - total flux cleaned = -0.00677247 Jy ! Component: 2000 - total flux cleaned = -0.00696775 Jy ! Total flux subtracted in 2048 components = -0.00707505 Jy ! Clean residual min=-0.001165 max=0.001168 Jy/beam ! Clean residual mean=-0.000079 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.153311 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 154 components and 0.153311 Jy ![Exited script file: muppet] wmap "J1616-3509_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7071 x 1.192 at -38.53 degrees (North through East) ! Clean map min=-0.0022314 max=0.12597 Jy/beam ! Writing clean map to FITS file: J1616-3509_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12597 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00039934 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.951034 0.951034 1.90207 3.80414 7.60827 15.2165 30.4331 60.8662 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7071 x 1.192 at -38.53 degrees (North through East) ! Clean map min=-0.0022314 max=0.12597 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1616-3509_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 13:09:31 2017